Revealing Nanoscale Chemical Heterogeneities in Polycrystalline Mo-BiVO4 Thin Films

The activity of polycrystalline thin film photoelectrodes is impacted by local variations of the material properties due to the exposure of different crystal facets and the presence of grain/domain boundaries. Here a multi-modal approach is applied to correlate nanoscale heterogeneities in chemical composition and electronic structure with nanoscale morphology in polycrystalline Mo-BiVO₄ . By using scanning transmission X-ray microscopy, the characteristic structure of polycrystalline film is used to disentangle the different X-ray absorption spectra corresponding to grain centers and grain boundaries. Comparing both spectra reveals phase segregation of V₂ O₅ at grain boundaries of Mo-BiVO₄ thin films, which is further supported by X-ray photoelectron spectroscopy and many-body density functional theory calculations. Theoretical calculations also enable to predict the X-ray absorption spectral fingerprint of polarons in Mo-BiVO₄ . After photo-electrochemical operation, the degraded Mo-BiVO₄ films show similar grain center and grain boundary spectra indicating V₂ O₅ dissolution in the course of the reaction. Overall, these findings provide valuable insights into the degradation mechanism and the impact of material heterogeneities on the material performance and stability of polycrystalline photoelectrodes.

Anapole Excitations in Oxygen-Vacancy-Rich TiO2-x Nanoresonators: Tuning the Absorption for Photocatalysis in the Visible Spectrum

Research on optically resonant dielectric nanostructures has accelerated the development of photonic applications, driven by their ability to strongly confine light on the nanoscale. However, as dielectric resonators are typically operated below their band gap to minimize optical losses, the usage of dielectric nanoantenna concepts for absorption enhancement has largely remained unexplored. In this work, we realize engineered nanoantennas composed of photocatalytic dielectrics and demonstrate increased light-harvesting capabilities in otherwise weakly absorptive spectral regions. In particular, we employ anapole excitations, which are known for their strong light confinement, in nanodisks of oxygen-vacancy-rich TiO_2-x, a prominent photocatalyst that provides a powerful platform for exploring concepts in absorption enhancement in tunable nanostructures. The arising photocatalytic effect is monitored on the single particle level using the well-established photocatalytic silver reduction reaction on TiO₂. With the freedom of changing the optical properties of TiO₂ through tuning the abundance of V_O states, we discuss the interplay between cavity damping and the anapole-assisted field confinement for absorption enhancement. This concept is general and can be extended to other catalytic materials with higher refractive indices.

High Photovoltage Inverted Planar Heterojunction Perovskite Solar Cells with All-Inorganic Selective Contact Layers

Inverted planar heterojunction perovskite solar cells based on all-inorganic selective contact layers show great promise for commercialization owing to their competitiveness in terms of cost and stability. However, the power conversion efficiencies (PCEs) of the few reported perovskite solar cells with this type of device structure have been limited by relatively low photovoltages. Here, we propose a new device structure comprising electron beam-evaporated nickel and niobium oxides as the hole and electron selective contact layers, respectively. We demonstrate that a metal oxide material can be directly deposited on a perovskite film by electron beam evaporation without damaging the interface. We propose that the turn-on voltage of the p-n junction formed by the selective contacts represents a quantitative proxy of the charge blocking performance. A high turn-on voltage of 1.36 V is obtained for the NiO_x/Nb₂O₅ p-n junction. An open-circuit voltage of 1.16 V is achieved using a hybrid organic-inorganic perovskite with a band gap of 1.6 eV. The large photovoltage, enabled by the excellent charge extraction and blocking properties of the inorganic selective contact layers, leads to the highest PCE of over 19.0% for this class of device.

Photo-induced selective etching of GaN nanowires in water

Nanowire (NW) based devices for solar driven artificial photosynthesis have gained increasing interest in recent years due to the intrinsically high surface to volume ratio and the excellent achievable crystal qualities. However, catalytically active surfaces often suffer from insufficient stability under operational conditions. To gain a fundamental understanding of the underlying processes, the photochemical etching behavior of hexagonal and round GaN NWs in deionized water under illumination are investigated. We find that the crystallographic c-plane remains stable, whereas the m-planes are photochemically etched with rates up to 11 nm min-1, depending on the applied UV light intensity. By investigating nanowalls, we achieve control of the exposed crystallographic facets and find an enhanced stability of the a-plane compared to the m-plane. Photo-excited holes, which drift to the side facets due to the upward surface band bending in nominally n-type (not intentionally doped) GaN, are identified as the driving force of the process, which allows the development of concepts for the stabilization of the nanostructures. A geometrically enhanced absorption of periodic NW arrays is correlated with a dependence of the etch rate on the NW pitch and diameter. Further, we find selective photochemical etching of the NW base in the presence of sub-band gap illumination, which is attributed to defect-related absorption in this region. These results provide improved understanding of the roles of inhomogeneous defect distribution, light excitation profiles, and different surface facets on the photochemical stability of nanostructures and provide viable strategies for improving stabilities under light-driven reaction conditions.

Hybrid photoelectrochemical and photovoltaic cells for simultaneous production of chemical fuels and electrical power

Harnessing solar energy to drive photoelectrochemical reactions is widely studied for sustainable fuel production and versatile energy storage over different timescales. However, the majority of solar photoelectrochemical cells cannot drive the overall photosynthesis reactions without the assistance of an external power source. A device for simultaneous and direct production of renewable fuels and electrical power from sunlight is now proposed. This hybrid photoelectrochemical and photovoltaic device allows tunable control over the branching ratio between two high-value products of solar energy conversion, requires relatively simple modification to existing photovoltaic technologies, and circumvents the photocurrent mismatches that lead to significant loss in tandem photoelectrochemical systems comprising chemically stable photoelectrodes. Our proof-of-concept device is based on a transition metal oxide photoanode monolithically integrated onto silicon that possesses both front- and backside photovoltaic junctions. This integrated assembly drives spontaneous overall water splitting with no external power source, while also producing electricity near the maximum power point of the backside photovoltaic junction. The concept that photogenerated charge carriers can be controllably directed to produce electricity and chemical fuel provides an opportunity to significantly increase the energy return on energy invested in solar fuels systems and can be adapted to a variety of architectures assembled from different materials.

Disentangling the Role of Surface Chemical Interactions on Interfacial Charge Transport at BiVO4 Photoanodes

Chemical transformations that occur on photoactive materials, such as photoelectrochemical water splitting, are strongly influenced by the surface properties as well as by the surrounding environment. Herein, we elucidate the effects of oxygen and water surface adsorption on band alignment, interfacial charge transfer, and charge-carrier transport by using complementary Kelvin probe measurements and photoconductive atomic force microscopy on bismuth vanadate. By observing variations in surface potential, we show that adsorbed oxygen acts as an electron-trap state at the surface of bismuth vanadate, whereas adsorbed water results in formation of a dipole layer without inducing interfacial charge transfer. The apparent change of trap state density under dry or humid nitrogen, as well as under oxygen-rich atmosphere, proves that surface adsorbates influence charge-carrier transport properties in the material. The finding that oxygen introduces electronically active states on the surface of bismuth vanadate may have important implications for understanding functional characteristics of water splitting photoanodes, devising strategies to passivate interfacial trap states, and elucidating important couplings between energetics and charge transport in reaction environments.

Nanoscale imaging of charge carrier transport in water splitting photoanodes

The performance of energy materials hinges on the presence of structural defects and heterogeneity over different length scales. Here we map the correlation between morphological and functional heterogeneity in bismuth vanadate, a promising metal oxide photoanode for photoelectrochemical water splitting, by photoconductive atomic force microscopy. We demonstrate that contrast in mapping electrical conductance depends on charge transport limitations, and on the contact at the sample/probe interface. Using temperature and illumination intensity-dependent current–voltage spectroscopy, we find that the transport mechanism in bismuth vanadate can be attributed to space charge-limited current in the presence of trap states. We observe no additional recombination sites at grain boundaries, which indicates high defect tolerance in bismuth vanadate. These findings support the fabrication of highly efficient bismuth vanadate nanostructures and provide insights into how local functionality affects the macroscopic performance.

The performance of energy materials is affected by structural defects, as well as physicochemical heterogeneity over different length scales. Here the authors map nanoscale correlations between morphological and functional heterogeneity, quantifying the trap states limiting electronic transport in bismuth vanadate thin films.

Cation-Dependent Light-Induced Halide Demixing in Hybrid Organic-Inorganic Perovskites

Mixed cation metal halide perovskites with increased power conversion efficiency, negligible hysteresis, and improved long-term stability under illumination, moisture, and thermal stressing have emerged as promising compounds for photovoltaic and optoelectronic applications. Here, we shed light on photoinduced halide demixing using in situ photoluminescence spectroscopy and in situ synchrotron X-ray diffraction (XRD) to directly compare the evolution of composition and phase changes in CH(NH₂)₂CsPb-halide (FACsPb-) and CH₃NH₃Pb-halide (MAPb-) perovskites upon illumination, thereby providing insights into why FACs-perovskites are less prone to halide demixing than MA-perovskites. We find that halide demixing occurs in both materials. However, the I-rich domains formed during demixing accumulate strain in FACsPb-perovskites but readily relax in MA-perovskites. The accumulated strain energy is expected to act as a stabilizing force against halide demixing and may explain the higher Br composition threshold for demixing to occur in FACsPb-halides. In addition, we find that while halide demixing leads to a quenching of the high-energy photoluminescence emission from MA-perovskites, the emission is enhanced from FACs-perovskites. This behavior points to a reduction of nonradiative recombination centers in FACs-perovskites arising from the demixing process and buildup of strain. FACsPb-halide perovskites exhibit excellent intrinsic material properties with photoluminescence quantum yields that are comparable to MA-perovskites. Because improved stability is achieved without sacrificing electronic properties, these compositions are better candidates for photovoltaic applications, especially as wide bandgap absorbers in tandem cells.

Composition-Dependent Functionality of Copper Vanadate Photoanodes

To understand functional roles of constituent elements in ternary metal oxide photoanodes, essential photoelectrochemical (PEC) properties are systematically analyzed on a series of copper vanadate compounds with different Cu:V elemental ratios. Homogeneous and highly continuous thin films of β-Cu₂V₂O₇, γ-Cu₃V₂O₈, Cu₁₁V₆O₂₆, and Cu₅V₂O₁₀ are grown via reactive co-sputtering and their performance characteristics for the light-driven oxygen evolution reaction are evaluated. All four compounds have similar bandgaps in the range of 1.83-2.03 eV, though Cu-rich phases exhibit stronger optical absorption and higher charge separation efficiencies. Transient photocurrent analysis reveals a reduction of surface catalytic activity with increasing Cu:V elemental ratio due to competitive charge recombination at Cu-related surface states. This comprehensive analysis of PEC functionalities-including photon absorption, carrier separation, and heterogeneous charge transfer-informs strategies for improving PEC activity in the copper vanadate materials system and provides insights that may aid discovery, design, and engineering of new photoelectrode materials.

Structurally Deformed MoS2 for Electrochemically Stable, Thermally Resistant, and Highly Efficient Hydrogen Evolution Reaction

The emerging molybdenum disulfide (MoS₂ ) offers intriguing possibilities for realizing a transformative new catalyst for driving the hydrogen evolution reaction (HER). However, the trade-off between catalytic activity and long-term stability represents a formidable challenge and has not been extensively addressed. This study reports that metastable and temperature-sensitive chemically exfoliated MoS₂ (ce-MoS₂ ) can be made into electrochemically stable (5000 cycles), and thermally robust (300 °C) while maintaining synthetic scalability and excellent catalytic activity through physical-transformation into 3D structurally deformed nanostructures. The dimensional transition enabled by a high throughput electrohydrodynamic process provides highly accessible, and electrochemically active surface area and facilitates efficient transport across various interfaces. Meanwhile, the hierarchically strained morphology is found to improve electronic coupling between active sites and current collecting substrates without the need for selective engineering the electronically heterogeneous interfaces. Specifically, the synergistic combination of high strain load stemmed from capillarity-induced-self-crumpling and sulfur (S) vacancies intrinsic to chemical exfoliation enables simultaneous modulation of active site density and intrinsic HER activity regardless of continuous operation or elevated temperature. These results provide new insights into how catalytic activity, electrochemical-, and thermal stability can be concurrently enhanced through the physical transformation that is reminiscent of nature, in which properties of biological materials emerge from evolved dimensional transitions.

Low Pressure Vapor-assisted Solution Process for Tunable Band Gap Pinhole-free Methylammonium Lead Halide Perovskite Films

Organo-lead halide perovskites have recently attracted great interest for potential applications in thin-film photovoltaics and optoelectronics. Herein, we present a protocol for the fabrication of this material via the low-pressure vapor assisted solution process (LP-VASP) method, which yields ~19% power conversion efficiency in planar heterojunction perovskite solar cells. First, we report the synthesis of methylammonium iodide (CH3NH3I) and methylammonium bromide (CH3NH3Br) from methylamine and the corresponding halide acid (HI or HBr). Then, we describe the fabrication of pinhole-free, continuous methylammonium-lead halide perovskite (CH3NH3PbX3 with X = I, Br, Cl and their mixture) films with the LP-VASP. This process is based on two steps: i) spin-coating of a homogenous layer of lead halide precursor onto a substrate, and ii) conversion of this layer to CH3NH3PbI3-xBrx by exposing the substrate to vapors of a mixture of CH3NH3I and CH3NH3Br at reduced pressure and 120 °C. Through slow diffusion of the methylammonium halide vapor into the lead halide precursor, we achieve slow and controlled growth of a continuous, pinhole-free perovskite film. The LP-VASP allows synthetic access to the full halide composition space in CH3NH3PbI3-xBrx with 0 ≤ x ≤ 3. Depending on the composition of the vapor phase, the bandgap can be tuned between 1.6 eV ≤ Eg ≤ 2.3 eV. In addition, by varying the composition of the halide precursor and of the vapor phase, we can also obtain CH3NH3PbI3-xClx. Films obtained from the LP-VASP are reproducible, phase pure as confirmed by X-ray diffraction measurements, and show high photoluminescence quantum yield. The process does not require the use of a glovebox.

A multifunctional biphasic water splitting catalyst tailored for integration with high-performance semiconductor photoanodes

Artificial photosystems are advanced by the development of conformal catalytic materials that promote desired chemical transformations, while also maintaining stability and minimizing parasitic light absorption for integration on surfaces of semiconductor light absorbers. Here, we demonstrate that multifunctional, nanoscale catalysts that enable high-performance photoelectrochemical energy conversion can be engineered by plasma-enhanced atomic layer deposition. The collective properties of tailored Co₃O₄/Co(OH)₂ thin films simultaneously provide high activity for water splitting, permit efficient interfacial charge transport from semiconductor substrates, and enhance durability of chemically sensitive interfaces. These films comprise compact and continuous nanocrystalline Co₃O₄ spinel that is impervious to phase transformation and impermeable to ions, thereby providing effective protection of the underlying substrate. Moreover, a secondary phase of structurally disordered and chemically labile Co(OH)₂ is introduced to ensure a high concentration of catalytically active sites. Application of this coating to photovoltaic p⁺n-Si junctions yields best reported performance characteristics for crystalline Si photoanodes.

Detecting structural variances of Co3O4 catalysts by controlling beam-induced sample alterations in the vacuum of a transmission electron microscope

This article summarizes core aspects of beam-sample interactions in research that aims at exploiting the ability to detect single atoms at atomic resolution by mid-voltage transmission electron microscopy. Investigating the atomic structure of catalytic Co₃O₄ nanocrystals underscores how indispensable it is to rigorously control electron dose rates and total doses to understand native material properties on this scale. We apply in-line holography with variable dose rates to achieve this goal. Genuine object structures can be maintained if dose rates below ~100 e/Ųs are used and the contrast required for detection of single atoms is generated by capturing large image series. Threshold doses for the detection of single atoms are estimated. An increase of electron dose rates and total doses to common values for high resolution imaging of solids stimulates object excitations that restructure surfaces, interfaces, and defects and cause grain reorientation or growth. We observe a variety of previously unknown atom configurations in surface proximity of the Co₃O₄ spinel structure. These are hidden behind broadened diffraction patterns in reciprocal space but become visible in real space by solving the phase problem. An exposure of the Co₃O₄ spinel structure to water vapor or other gases induces drastic structure alterations that can be captured in this manner.

Discovery of Fe-Ce Oxide/BiVO4 Photoanodes through Combinatorial Exploration of Ni-Fe-Co-Ce Oxide Coatings

An efficient photoanode is a prerequisite for a viable solar fuels technology. The challenges to realizing an efficient photoanode include the integration of a semiconductor light absorber and a metal oxide electrocatalyst to optimize corrosion protection, light trapping, hole transport, and photocarrier recombination sites. To efficiently explore metal oxide coatings, we employ a high-throughput methodology wherein a uniform BiVO4 film is coated with 858 unique metal oxide coatings covering a range of metal oxide loadings and the full (Ni-Fe-Co-Ce)Ox pseudoquaternary composition space. Photoelectrochemical characterization of the photoanodes reveals that specific combinations of metal oxide composition and loading provide up to a 13-fold increase in the maximum photoelectrochemical power generation for oxygen evolution in pH 13 electrolyte. Through mining of the high-throughput data we identify composition regions that form improved interfaces with BiVO4. Of particular note, integrated photoanodes with catalyst compositions in the range Fe(0.4-0.6)Ce(0.6-0.4)Ox exhibit high interface quality and excellent photoelectrochemical power conversion. Scaled-up inkjet-printed electrodes and photoanodic electrodeposition of this composition on BiVO4 confirms the discovery and the synthesis-independent interface improvement of (Fe-Ce)Ox coatings on BiVO4.

Mechanistic insights into chemical and photochemical transformations of bismuth vanadate photoanodes

Artificial photosynthesis relies on the availability of semiconductors that are chemically stable and can efficiently capture solar energy. Although metal oxide semiconductors have been investigated for their promise to resist oxidative attack, materials in this class can suffer from chemical and photochemical instability. Here we present a methodology for evaluating corrosion mechanisms and apply it to bismuth vanadate, a state-of-the-art photoanode. Analysis of changing morphology and composition under solar water splitting conditions reveals chemical instabilities that are not predicted from thermodynamic considerations of stable solid oxide phases, as represented by the Pourbaix diagram for the system. Computational modelling indicates that photoexcited charge carriers accumulated at the surface destabilize the lattice, and that self-passivation by formation of a chemically stable surface phase is kinetically hindered. Although chemical stability of metal oxides cannot be assumed, insight into corrosion mechanisms aids development of protection strategies and discovery of semiconductors with improved stability.

Scalable water splitting on particulate photocatalyst sheets with a solar-to-hydrogen energy conversion efficiency exceeding 1

Photocatalytic water splitting using particulate semiconductors is a potentially scalable and economically feasible technology for converting solar energy into hydrogen. Z-scheme systems based on two-step photoexcitation of a hydrogen evolution photocatalyst (HEP) and an oxygen evolution photocatalyst (OEP) are suited to harvesting of sunlight because semiconductors with either water reduction or oxidation activity can be applied to the water splitting reaction. However, it is challenging to achieve efficient transfer of electrons between HEP and OEP particles. Here, we present photocatalyst sheets based on La- and Rh-codoped SrTiO3 (SrTiO3:La, Rh; ref. ) and Mo-doped BiVO4 (BiVO4:Mo) powders embedded into a gold (Au) layer. Enhancement of the electron relay by annealing and suppression of undesirable reactions through surface modification allow pure water (pH 6.8) splitting with a solar-to-hydrogen energy conversion efficiency of 1.1% and an apparent quantum yield of over 30% at 419 nm. The photocatalyst sheet design enables efficient and scalable water splitting using particulate semiconductors.

Suppression of Photoanodic Surface Oxidation of n-Type 6H-SiC Electrodes in Aqueous Electrolytes

The photoelectrochemical characterization of silicon carbide (SiC) electrodes is important for enabling a wide range of potential applications for this semiconductor. However, photocorrosion of the SiC surface remains a key challenge, because this process considerably hinders the deployment of this material into functional devices. In this report, we use cyclic voltammetry to investigate the stability of n-type 6H-SiC photoelectrodes in buffered aqueous electrolytes. For measurements in pure Tris buffer, photogenerated holes accumulate at the interface under anodic polarization, resulting in the formation of a porous surface oxide layer. Two possibilities are presented to significantly enhance the stability of the SiC photoelectrodes. In the first approach, redox molecules are added to the buffer solution to kinetically facilitate hole transfer to these molecules, and in the second approach, water oxidation in the electrolyte is induced by depositing a cobalt phosphate catalyst onto the semiconductor surface. Both methods are found to effectively suppress photocorrosion of the SiC electrodes, as confirmed by atomic force microscopy and X-ray photoelectron spectroscopy measurements. The presented study provides straightforward routes to stabilize n-type SiC photoelectrodes in aqueous electrolytes, which is essential for a possible utilization of this material in the fields of photocatalysis and multimodal biosensing.

High Photoluminescence Quantum Yield in Band Gap Tunable Bromide Containing Mixed Halide Perovskites

Hybrid organic-inorganic halide perovskite based semiconductor materials are attractive for use in a wide range of optoelectronic devices because they combine the advantages of suitable optoelectronic attributes and simultaneously low-cost solution processability. Here, we present a two-step low-pressure vapor-assisted solution process to grow high quality homogeneous CH3NH3PbI3-xBrx perovskite films over the full band gap range of 1.6-2.3 eV. Photoluminescence light-in versus light-out characterization techniques are used to provide new insights into the optoelectronic properties of Br-containing hybrid organic-inorganic perovskites as a function of optical carrier injection by employing pump-powers over a 6 orders of magnitude dynamic range. The internal luminescence quantum yield of wide band gap perovskites reaches impressive values up to 30%. This high quantum yield translates into substantial quasi-Fermi level splitting and high "luminescence or optically implied" open-circuit voltage. Most importantly, both attributes, high internal quantum yield and high optically implied open-circuit voltage, are demonstrated over the entire band gap range (1.6 eV ≤ Eg ≤ 2.3 eV). These results establish the versatility of Br-containing perovskite semiconductors for a variety of applications and especially for the use as high-quality top cell in tandem photovoltaic devices in combination with industry dominant Si bottom cells.

Assembly and Photocarrier Dynamics of Heterostructured Nanocomposite Photoanodes from Multicomponent Colloidal Nanocrystals

Multicomponent oxides and their heterostructures are rapidly emerging as promising light absorbers to drive oxidative chemistry. To fully exploit their functionality, precise tuning of their composition and structure is crucial. Here, we report a novel solution-based route to nanostructured bismuth vanadate (BiVO4) that facilitates the assembly of BiVO4/metal oxide (TiO2, WO3, and Al2O3) nanocomposites in which the morphology of the metal oxide building blocks is finely tailored. The combination of transient absorption spectroscopy-spanning from picoseconds to second time scales-and photoelectrochemical measurements reveals that the achieved structural tunability is key to understanding and directing charge separation, transport, and efficiency in these complex oxide heterostructured films.

Bandgap Tunability in Sb-Alloyed BiVO₄ Quaternary Oxides as Visible Light Absorbers for Solar Fuel Applications

The challenge of fine compositional tuning and microstructure control in complex oxides is overcome by developing a general two-step synthetic approach. Antimony-alloyed bismuth vanadate, which is identified as a novel light absorber for solar fuel applications, is prepared in a wide compositional range. The bandgap of this quaternary oxide linearly decreases with the Sb content, in agreement with first-principles calculations.

Mo-doped BiVO4 photoanodes synthesized by reactive sputtering

We report a scalable and reproducible method for reactive co-sputtering of Mo-doped BiVO4 thin films with broad compositional control. Optimal photoanode performance is achieved at a Mo concentration of 3 at. %. Incorporation of Mo promotes growth of large grains and reduces majority carrier transport limitations, resulting in maximum AM1.5G photocurrent densities of 3.5 mA cm(-2) at 1.23 V vs. RHE in pH 6.8 buffer solution containing 0.1 M Na2 SO3 as a hole scavenger. Operation as a front-illuminated water oxidation photoanode is achieved by balancing the operational stability, catalytic activity, and parasitic optical absorption of a FeOOH oxygen evolution catalyst. FeOOH/Mo:BiVO4 thin film photoanodes enable water oxidation under the front-side illumination conditions used in integrated tandem water splitting devices.