Multiplex single particle analysis in microfluidics

A method to combine precise particle alignment in-flow and light scattering profile characterization for micrometric sized particles is reported.

Fluorescent (rhodamine), folate decorated and doxorubicin charged, PEGylated nanoparticles synthesis

PEGylated silica nanoparticles, giving very stable aqueous sols, were successfully functionalised with rhodamine, one of the more stable fluorophore; they were also decorated with the targeting agent folic acid (FA) and charged with the well known drug doxorubicin. Rhodamine functionalization required a modification of the synthesis route of the nanoparticles (NP). Functionalization with FA required activation with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride. Folate decorated NP were easily charged with doxorubicin. The experimental results proved the successfulness of the functionalization. The bond to the NP does not reduce the therapeutic efficacy of the drug. The calculated encapsulation efficiency (32 %) was only a little lower than the value (47 %) reported for the very popular PEGylated PLGA NP.

Hyaluronic-acid-based semi-interpenetrating materials

In order to enhance the mechanical performances of hyaluronic acid (HA) without compromising its biological activity, HA has been interpenetrating with a fibrillar collagen scaffold. The semi-interpenetrating materials were obtained by mixing HA with different molecular weight and a pepsin-solubilized collagen (atelocollagen) solution, and then by inducing collagen fibrillogenesis. Results indicate that molecular weight of HA significantly influences the mechanical properties of the semi-interpenetrating materials and more specifically stronger material results from the use of low-molecular-weight (LMW) HA. According to the dynamic mechanical data the composite collagen-LMW HA has a higher elastic modulus than collagen, whereas the opposite is true for the high-molecular-weight (HMW) HA. This result highlights the role of specific interactions that occur between collagen and HA during the gel formation in controlling the network mechanical stability. LMW HA may, probably, interact more strongly with collagen during the fibrillogenesis process than HMW HA due to the higher mobility of the chains and the weaker homologous interactions. Moreover, morphological observations showed that LMW HA is intimately interdispersed within the collagen network and completely coated the fibrils, which act as mechanical support.

Solvent and melting induced microspheres sintering techniques: a comparative study of morphology and mechanical properties

In this work we propose a bottom up approach founded on the assembly of building blocks by solvent induced microparticle sintering to realize multifunctional polymer scaffolds with predefined pore dimension and fully percolative pathway, able to include interspersing microdepot for the release of bioactive molecules. The aim of this study was to develop a versatile method of microspheres sintering based on the partial dissolution of the surface of adjacent microparticles and to compare it with melting induced microspheres sintering, just developed in a previous work. The two techniques were compared in terms of morphology, porosity and mechanical properties. The high potential of customizing the sintering process by the proper selection of the sintering techniques as well as microparticles with different features (e.g., material, size, shape, inner porosity) allows obtaining a wide pattern of micro/nanostructures with bio-inspired mechanical response so satisfying all basic requirements of a "smart" scaffold for bone tissue engineering.

Tuning the microstructure and biodegradation of three-phase scaffolds for bone regeneration made of PCL, Zein, and HA

The aim of this study has been the design of novel multi-phase porous scaffolds with bi-modal pore size distributions and controlled biodegradation rate for bone tissue engineering (bTE), via a gas foaming—leaching approach. Poly( ε-caprolactone) (PCL) has been melt mixed with thermoplastic zein (TZ) and hydroxyapatite particle, to prepare multi-phase PCL—TZ and PCL—TZ—HA composites suitable to be further processed for the fabrication of 3D porous scaffolds. To this aim, these systems have been gas foamed by using CO2 as blowing agent and, subsequently, soaked in H2O to leach out the plasticizer from the TZ. This combined process allows the formation of an interpenetrated micro- and macro-porosity network within the samples. The effect of the different formulations on the micro-structural properties and in vitro biodegradation of the scaffolds has been investigated, and the results correlated to the mechanisms involved in the formation of the bi-modal pore structure. Results demonstrated that the multi-phase nature of the biomaterials prepared as well as their composition significantly affect the micro-structural properties and biodegradation rate of the scaffolds. The optimal selection of the processing conditions may allow for the design of multi-phase 3D porous scaffolds suitable for bTE.

Covalently immobilized RGD gradient on PEG hydrogel scaffold influences cell migration parameters

Understanding the influence of a controlled spatial distribution of biological cues on cell activities can be useful to design "cell instructive" materials, able to control and guide the formation of engineered tissues in vivo and in vitro. To this purpose, biochemical and mechanical properties of the resulting biomaterial must be carefully designed and controlled. In this work, the effect of covalently immobilized RGD peptide gradients on poly(ethylene glycol) diacrylate hydrogels on cell behaviour was studied. We set up a mechanical device generating gradients based on a fluidic chamber. Cell response to RGD gradients with different slope (0.7, 1 and 2 mM cm(-1)) was qualitatively and quantitatively assessed by evaluating cell adhesion and, in particular, cell migration, compared to cells seeded on hydrogels with uniform distribution of RGD peptides. To evaluate the influence of RGD gradient and to exclude any concentration effect on cell response, all analyses were carried out in a specific region of the gradients which displayed the same average concentration of RGD (1.5 mM). Results suggest that cells recognize the RGD gradient and adhere onto it assuming a stretched shape. Moreover, cells tend to migrate in the direction of the gradient, as their speed is higher than that of cells migrating on hydrogels with a uniform distribution of RGD and increases by increasing RGD gradient steepness. This increment is due to an augmentation of bias speed component of the mean squared speed, that is, the drift of the cell population migrating on the anisotropic surface provided by the RGD gradient.

Design of porous polymeric scaffolds by gas foaming of heterogeneous blends

One of the challenges in tissue engineering scaffold design is the realization of structures with a pre-defined multi-scaled porous network. Along this line, this study aimed at the design of porous scaffolds with controlled porosity and pore size distribution from blends of poly(epsilon-caprolactone) (PCL) and thermoplastic gelatin (TG), a thermoplastic natural material obtained by de novo thermoplasticization of gelatin. PCL/TG blends with composition in the range from 40/60 to 60/40 (w/w) were prepared by melt mixing process. The multi-phase microstructures of these blends were analyzed by scanning electron microscopy and dynamic mechanical analysis. Furthermore, in order to prepare open porous scaffolds for cell culture and tissue replacement, the TG and PCL were selectively extracted from the blends by the appropriate combination of solvent and extraction parameters. Finally, with the proposed combination of gas foaming and selective polymer extraction technologies, PCL and TG porous materials with multi-scaled and highly interconnected porosities were designed as novel scaffolds for new-tissue regeneration.

Gene delivery systems for gene therapy in tissue engineering and central nervous system applications

The present review aims to describe the potential applications of gene delivery systems to tissue engineering and central nervous system diseases. Some key experimental work has been done with interesting results, but the subject is far from being fully explored. The combined approach of gene therapy and material science has a huge potential to improve the therapeutic approaches now available for a wide range of medical applications. Focus is given to this multidisciplinary strategy in neurodegenerative pathologies, where the use of polymeric matrices as gene carriers might make a crucial difference.

The performance of poly-epsilon-caprolactone scaffolds in a rabbit femur model with and without autologous stromal cells and BMP4

The ability of a cellular construct to guide and promote tissue repair strongly relies on three components, namely, cell, scaffold and growth factors. We aimed to investigate the osteopromotive properties of cellular constructs composed of poly-epsilon-caprolactone (PCL) and rabbit bone marrow stromal cells (BMSCs), or BMSCs engineered to express bone morphogenetic protein 4 (BMP4). Highly porous biodegradable PCL scaffolds were obtained via phase inversion/salt leaching technique. BMSCs and transfected BMSCs were seeded within the scaffolds by using an alternate flow perfusion system and implanted into non-critical size defects in New Zealand rabbit femurs. In vivo biocompatibility, osteogenic and angiogenic effects induced by the presence of scaffolds were assessed by histology and histomorphometry of the femurs, retrieved 4 and 8 weeks after surgery. PCL without cells showed scarce bone formation at the scaffold-bone interface (29% bone/implant contact and 62% fibrous tissue/implant contact) and scarce PCL resorption (16%). Conversely, PCL seeded with autologous BMSCs stimulated new tissue formation into the macropores of the implant (20%) and neo-tissue vascularization. Finally, the BMP4-expressing BMSCs strongly favoured osteoinductivity of cellular constructs, as demonstrated by a more extensive bone/scaffold contact.

Effects of fibronectin and laminin on structural, mechanical and transport properties of 3D collageneous network

Recent studies, on cells cultured in 3D collagen gels, have shown that, beside from their well known biochemical role, fibronectin (FN) and laminin (LM) affect cell functions via a modification of mechanical and structural properties of matrix due to interaction with collagen molecules. Though biochemical properties of FN and LM have been widely studied, little is known about their role in collagen matrix assembly. The aim of this work was to characterize FN- and LM-based collagen semi-interpenetrating polymer networks (semi-IPNs), in order to understand how these biomacromolecular species can affect collagen network assembly and properties. Morphology, viscoelasticity and diffusivity of collagen gels and FN- and LM-based collagen semi-IPNs were analysed by Confocal Laser Scanning microscopy (CLSM), Environmental Scanning Electron microscopy (ESEM), Transmission Electron microscopy (TEM), Rheometry and Fluorescence Recovery After Photobleaching (FRAP) techniques. It was found that FN and LM were organized in aggregates, interspersed in collagen gel, and in thin fibrils, distributed along collagen fibres. In addition, high FN and LM concentrations affected collagen fibre assembly and structure and induced drastic effects on rheological and transport properties.

Synthesis and characterization of macroporous poly(ethylene glycol)-based hydrogels for tissue engineering application

Peptide activated poly(ethylene glycol) (PEG)-based hydrogels have received wide attention as material for tissue engineering application. However, the close structure of these materials may pose severe barriers to tissue invasion and nutrient transport. The aim of this work was to synthesize highly interconnected macroporous PEG hydrogels, suitable for use as tissue engineering scaffolds, by combining the photocrosslinking reaction with a foaming process. In particular, various porous samples, differing for both the polymer molecular weight and concentration in the starting precursor solution, have been prepared and characterized by means of scanning electron microscopy and mercury porosimetry. Moreover, water swelling properties have been evaluated and compared with those of the conventional nonporous ones, by performing both equilibrium and kinetic swelling measurements in distilled water. Results indicated that foamed hydrogels display a well-interconnected porous network, suitable for tissue invasion and free molecular trafficking within them. Pores dimension as well as swelling rate can be modulated by polymer concentrations and bubbling agent composition in the precursor solution.

Time and Space Evolution of Transport Properties in Agarose–Chondrocyte Constructs

During the development of de novo synthesized cartilage tissue engineered constructs, transport and biophysical properties are expected to change in time and space. Monitoring and control of the evolution of these parameters are of crucial importance to process biohybrid constructs in vitro. The aim of this work was to measure fluid and macromolecular transport and evolution of mechanical properties of tissue-engineered cartilage constructs as a function of culture time and extracellular matrix (ECM) production. It was found, in agreement with other literature reports, that mechanical and fluid transport properties of the constructs correlated well with time of culture and glycosaminoglycan (GAG) content. Further, diffusion coefficients of 2 probes, dextran (500 kDa) and bovine serum albumin (BSA), correlated well with GAG production. Diffusion coefficients (D) were measured with high spatial and temporal resolution by fluorescent recovery after photobleaching (FRAP). Diffusivity steadily decreases with time while it does not vary through the thickness of the specimen. On the basis of these results, an empirical relationship between diffusion coefficient and GAG content was proposed for the 2 probes analyzed. The results of this study provide useful information to optimize and control the tissue culture process in vitro.

The effective dispersion of nanovectors within the tumor microvasculature

The effective longitudinal diffusion of nanovectors along non-permeable and permeable capillaries has been studied considering the contribution of molecular and convective diffusion based on the Taylor's theory of shear dispersion. The problem is of importance in the transport of nanovectors used for the intravascular delivery of drugs and contrast agents. It has been shown that for a given capillary size and hemodynamic conditions a critical radius acr exists for which the effective longitudinal diffusion along the capillary has a minimum: Nanovectors with a < acr diffuse mainly by Brownian diffusion whereas nanovectors with a < acr diffuse mainly by convection and the effective diffusion coefficient grows with a. In permeable conduits, the effective diffusion reduces significantly compared to normal non-leaky vessels and it has been derived that acr grows almost linearly with the hydraulic permeability Lp of blood vessels. It has been shown that the blood conduits with the largest effective longitudinal diffusivity could be preferentially targeted by the circulating vectors. Based on these findings, the following strategies are proposed to increase the number of nanovectors targeting the tumor vessels: (i) The use of nanovectors with a critical radius for normal vessels, (ii) the injecting of bolus of nanovectors with different radii, and (iii) the normalization of the tumor vasculature. Finally, it has been emphasized that the size of the vector should be selected depending on the body district where the tumoral mass is developing and on the type, malignancy, and state of the tumor.

Poly-epsilon-caprolactone/hydroxyapatite composites for bone regeneration: in vitro characterization and human osteoblast response

Polycaprolactone (PCL), a semicrystalline linear resorbable aliphatic polyester, is a good candidate as a scaffold for bone tissue engineering, due to its biocompatibility and biodegradability. However, the poor mechanical properties of PCL impair its use as scaffold for hard tissue regeneration, unless mechanical reinforcement is provided. To enhance mechanical properties and promote osteoconductivity, hydroxyapatite (HA) particles were added to the PCL matrix: three PCL-based composites with different volume ratio of HA (13%, 20%, and 32%) were studied. Mechanical properties and structure were analysed, along with biocompatibility and osteoconductivity. The addition of HA particles (in particular in the range of 20% and 32%) led to a significant improvement in mechanical performance (e.g., elastic modulus) of scaffold. Saos-2 cells and osteoblasts from human trabecular bone (hOB) retrieved during total hip replacement surgery were seeded onto 3D PCL samples for 1-4 weeks. Following the assessment of cell viability, proliferation, morphology, and ALP release, HA-loaded PCL was found to improve osteoconduction compared to the PCL alone. The results indicated that PCL represents a potential candidate as an efficient substrate for bone substitution through an accurate balance between structural/ mechanical properties of polymer and biological activities.

Basic structural parameters for the design of composite structures as ligament augmentation devices

Composite structures are designed to mimic the morphology and mechanical properties of natural ligaments. Filament winding technology has been implemented in order to obtain a composite material based on a polyurethane matrix (HydroThaneTM ), reinforced with degradable and non-degradable fibers. The mechanical properties of the matrix and fiber have been analysed to define the optimal type, volume ratio and winding angle of the reinforcement. The typical J-shaped stress-strain curve, displayed by natural tendons and ligaments, is reproduced. The mechanical behaviour of HydroThaneTM reinforced with poly(ethylene terephthalate) (PET) fibers were modified by varying the winding angle of the fibers. Fibers comprising poly(l-lactic acid) (PLLA), poly(glycolic acid) (PGA) and PET, individually and in combination, were considered as candidate materials for the reinforcement of a composite ligament augmentation device (LAD). Mechanical and degradation studies demonstrated that, by combining different types of fiber, at a fixed volume fraction and winding angle (20 degrees ), it is possible to optimize mechanical properties and degradation kinetics of the device.

Cellulose Derivative−Hyaluronic Acid-Based Microporous Hydrogels Cross-Linked through Divinyl Sulfone (DVS) To Modulate Equilibrium Sorption Capacity and Network Stability

The aim of this work is to obtain a chemically cross-linked hydrogel from hyaluronic acid and cellulose derivatives that exhibits sensitivity to variation of the composition of the external absorbing medium and an equilibrium sorption capacity higher than a common hyaluronic acid-based hydrogel, in view of its potential use in prevention of postsurgical soft tissue adhesion. This has been achieved by chemical stabilization of hyaluronic acid (HA) and cellulose derivatives, hydroxyethylcellulose (HEC) and carboxymethylcellulose (CMCNa) through the difunctional cross-linker divinyl sulfone. Significant increase in sorption capacity, both in water and in water solutions at different ionic strength, has been observed for these samples in comparison with hydrogels obtained through chemical stabilization of hyaluronic acid. Moreover, different dehydration procedures adopted for the xerogel synthesis have been used, which resulted in a modulation of the equilibrium sorption capacity. Hyaluronic acid stability has been confirmed by means of NMR analysis.

Spatial and structural dependence of mechanical properties of porcine intervertebral disc

Structure-function relationship of natural tissues is crucial to design a device mimicking the structures present in human body. For this purpose, to provide guidelines to design an intervertebral disc (IVD) substitute, in this study the influence of the spatial location and structural components on the mechanical properties of porcine IVD was investigated. Local compressive stiffness (LCS) was measured on the overall disc, also constrained between the two adjacent vertebrae: the dependence on the lumbar position was evaluated. The compliance values in the anterior position (A) were higher than both in the central posterior (CP) and in the lateral-posterior (RP, LP) locations. The values of Young's Modulus (74.67+/-6.03 MPa) and compression break load (1.36x10(4)+/-0.09x10(4)N) of the disc were also evaluated by distributed compression test. The NP rheological behavior was typical of weak-gels, with elastic modulus G' always higher than viscous modulus G" all over the frequency range investigated (G' and G" respectively equal to 320 and 85 Pa at 1 Hz) and with the moduli trends were almost parallel to each other.

Chitosan-based hydrogels: synthesis and characterization

Chitosan (CHI) is a polysaccharide of beta-1,4-linked 2-amino-2-deoxy-D-glucopyranose derived by N-deacetylation of chitin in aqueous alkaline medium. The shells of crustaceans such as crabs, shrimp, and lobster are the current source of chitosan. It is known to be non-toxic, odourless, biocompatible in animal tissues and enzymatically biodegradable. For these reasons much research interest has been paid to its biomedical, ecological, and industrial applications over the past decade. However, its rigid crystalline structure, poor solubility in organic solvents and poor processability have limited its use. To broadening its range of applications, a growth research effort has been devoted to explore ways of modifying Chitosan. Here it has been reported on the synthesis of new hydrogels, obtained by self-curing chitosan with acrylic acid (AA) and methyl acrylate (MA). The hydrogels were characterized by FTIR, swelling and rheological analysis. The results of this study showed that the swelling and mechanical properties of chitosan are highly improved by the presence of poly acrylate. The swelling degree of these materials does not depend upon the ratio MA/AA. It is possible to improve and modulate the mechanical properties of the hydrogels by changing the relative MA/AA ratio.

Role of extracellular matrix assembly in interstitial transport in solid tumors

The extracellular matrix (ECM) may contribute to the drug resistance of a solid tumor by preventing the penetration of therapeutic agents. We measured differences in interstitial resistance to macromolecule (IgG) motion in four tumor types and found an unexpected correspondence between transport resistance and the mechanical stiffness. The interstitial diffusion coefficient of IgG was measured in situ by fluorescence redistribution after photobleaching. Tissue elastic modulus and hydraulic conductivity were measured by confined compression of excised tissue. In apparent contradiction to an existing paradigm, these functional properties are correlated with total tissue content of collagen, not glycosaminoglycan. An extended collagen network was observed in the more penetration-resistant tumors. Collagenase treatment of the more penetration-resistant tumors significantly increased the IgG interstitial diffusion rate. We conclude that collagen influences the tissue resistance to macromolecule transport, possibly by binding and stabilizing the glycosaminoglycan component of the ECM. These findings suggest a new method to screen tumors for potential resistance to macromolecule-based therapy. Moreover, collagen and collagen-proteoglycan bonds are identified as potential targets of treatment to improve macromolecule delivery.