Biocompatible, detachable, and free-standing polyelectrolyte multilayer films

Self-assembled polyelectrolyte multilayers have gained tremendous popularity over the past decade and have been incorporated in diverse applications. However, the fabrication of detachable and free-standing polyelectrolyte multilayers (PEMs) has proven to be difficult. We report the design of detachable, free-standing, and biocompatible PEMs comprised of hyaluronic acid (anionic PE) and chitosan (cationic PE). These PEMs can be detached from an underlying inert substrate without any postprocessing steps. Our approach enables the fabrication of detachable PEMs from a wide range of polyelectrolytes. Cross-linked PEMs exhibited greater than 95% weight retention when maintained in phosphate buffered saline at 37 °C over a seven day period. The PEM thickness was approximately 3 μm for dried films and increased 2-fold under hydration. A unique feature of the detachable, free-standing PEMs is their optical transparency in the 400-900 nm range under hydrated conditions. The Young's modulus of the cross-linked films ranged from 300-400 MPa, rendering these detachable free-standing multilayers ideal for biomaterial applications. BALB/c 3T3 fibroblasts adhered on the PEMs and colonized the entire surface over a six day period. The cellular responses, as well as the physical properties, demonstrate that the detachable PEM films exhibit tremendous potential for applications in biomaterials and tissue engineering.

The design of in vitro liver sinusoid mimics using chitosan-hyaluronic acid polyelectrolyte multilayers

Interactions between hepatocytes and liver sinusoidal endothelial cells (LSECs) are essential for the development and maintenance of hepatic phenotypic functions. We report the assembly of three-dimensional liver sinusoidal mimics comprised of primary rat hepatocytes, LSECs, and an intermediate chitosan-hyaluronic acid polyelectrolyte multilayer (PEM). The height of the PEMs ranged from 30 to 55 nm and exhibited a shear modulus of approximately 100 kPa. Hepatocyte-PEM cellular constructs exhibited stable urea and albumin production over a 7-day period, and these values were either higher or similar to cells cultured in a collagen sandwich. This is of significance because the thickness of a collagen gel is approximately 1000-fold higher than the height of the chitosan-hyaluronic acid PEM. In the hepatocyte-PEM-LSEC liver-mimetic cellular constructs, LSEC phenotype was maintained, and these cultures exhibited stable urea and albumin production. CYP1A1/2 activity measured over a 7-day period was significantly higher in the hepatocyte-PEM-LSEC constructs than in collagen sandwich cultures. A 16-fold increase in CYP1A1/2 activity was observed for hepatocyte-PEM-10,000 LSEC samples, thereby suggesting that interactions between hepatocytes and LSECs are critical in enhancing the detoxification capability in hepatic cultures in vitro.

Molecular variation among isolates of Verticillium dahliae and polymerase chain reaction-based differentiation of races

Verticillium dahliae is a soilborne fungal pathogen that causes vascular wilt in a variety of economically important crops worldwide. There are two races of V. dahliae that infect tomato and lettuce. Although race-1-specific resistance has been identified in both tomato and lettuce, no resistant sources are available for race 2. Molecular analyses were employed to characterize the genetic variability and race structure of 101 isolates of V. dahliae from a variety of hosts, mainly from central and coastal California, and 10 isolates exotic to this area. Analyses of the 16 simple sequence repeat (SSR) markers illustrated that tomato subpopulations from central California were distinct relative to the marigold subpopulations. In contrast, cotton and olive isolates showed admixture with tomato isolates. Analyses of both the ribosomal DNA intergenic spacer regions and SSR markers revealed high genetic variability among isolates but were unable to delineate races of V. dahliae. However, a polymerase chain reaction (PCR) assay was applied to amplify a race-1-specific amplicon from the isolates in many hosts from different geographic areas, and was coupled with virulence assays for validation of the data. Results of the PCR assay showed 100% concordance with the virulence assay to differentiate race 1 from race 2 of 48 isolates from tomato. The results indicate that the PCR assay can be applied to differentiate the two races to support our related aim of breeding host resistance, and further reveal insights into the distribution of races in tomato and lettuce cropping systems in California.

First Report of Powdery Mildew Caused by Golovinomyces biocellatus on Peppermint in California

In August of 2009, powdery mildew was observed on peppermint (Mentha piperita L.) in several commercial fields in the Fall River Valley of eastern Shasta County, California. Plant growth was apparently reduced by the disease, but its impact on yield was unknown. White fungal growth was restricted to the adaxial surfaces, where colonies were thin and effused. Heavily infected leaves developed a reddish tint as growth prematurely ceased. Doliform conidia ([26.6-] 29.2 [-31.7] × [13.2-] 15.6 [-16.8] μm) were produced in chains of approximately six conidia. Foot cells were cylindrical ([41.3-] 55.2 [-75.0] × [11.2-] 12.0 [-12.8] μm). Immature chasmothecia were yellowish brown and approximately 100.0 μm in diameter with flexuous, mycelium-like appendages up to 200 μm long. All these features were consistent with those of Golovinomyces biocellatus. Asci were not observed. To confirm the identity of the fungus, nuclear rDNA internal transcribed spacer (ITS) regions were amplified by PCR with universal primers ITS4 and ITS5. The sequence (537 bp) was an exact match for several submissions of G. biocellatus in GenBank (e.g., Accession No. EU035602, a sequence of the fungus from mint in Australia [1]). Pathogenicity was confirmed by brushing spores from naturally infected leaves onto three rooted cuttings of M. piperita 'Black Mitchum'. After the plants were covered with a plastic bag for 36 h to maintain high humidity, they were kept on a greenhouse bench at 23 to 28°C. Three noninoculated plants, which served as controls, were placed in another greenhouse in similar conditions. The experiment was repeated once. All inoculated plants developed signs of powdery mildew within 7 days of inoculation whereas noninoculated plants remained disease free. The fungus on inoculated leaves was morphologically indistinguishable from the one used to inoculate the plants. To our knowledge, this is the first report of G. biocellatus on peppermint in California. References: (1) J. R. Liberato and J. H. Cunnington. Australas, Plant Dis. Notes 2:38, 2007.

New Genotypes of Fusarium oxysporum f. sp. vasinfectum from the Southeastern United States

Sixty-one isolates of Fusarium oxysporum f. sp. vasinfectum were collected from cotton plants (Gossypium spp.) with symptoms of Fusarium wilt to determine the composition of races present in the southeastern United States. Analysis of partial sequences of the translation elongation factor gene revealed four novel genotypes, as well as the presence of races 3 and 8 for the first time in the United States outside of California. The majority of isolates (16 of 27) sampled from Arkansas were novel genotypes. A subset of isolates representing the novel genotypes was compared with previously described races using sequences from translation elongation factor, phosphate permase, and β-tubulin genes and their pathogenicity on a total of six Upland (Gossypium hirsutum) and Pima (G. barbadense) cotton cultivars. Two of the novel genotypes belonged to a clade containing races 1, 2, 4, 6, and 8 and two shared ancestry with race 3. All new genotypes were pathogenic to at least some of the cotton cultivars tested. The Pima cv. Phytogen 800 was relatively resistant to all genotypes of the pathogen. These results indicate that the population of F. oxysporum f. sp. vasinfectum in the southeastern United States is more diverse than previously recognized.

Iris yellow spot virus in Onion in Nevada and Northern California

The disease caused by thrips-transmitted Iris yellow spot virus (IYSV; genus Tospovirus, family Bunyaviridae) has become a major constraint to bulb and seed onion crops in several parts of the country and the world (1,3). As part of an ongoing survey for IYSV incidence in onion in the western United States, commercial fields in Lyon County, Nevada and several commercial fields in the northern Californian counties of Colusa, San Benito, Sutter, and Yolo were surveyed during the summer of 2008. Symptomatic plants were found widespread in northern California, especially in seed-production fields. In Lyon County, NV, symptoms were observed only on volunteer onions in one commercial field. Symptoms on leaves and scapes included characteristic diamond-shaped lesions with or without green islands. Four samples from Nevada and fourteen from northern California were tested by double-antibody sandwich (DAS)-ELISA using a commercially available kit (Agdia Inc., Elkhart, IN). All tested samples were found positive in ELISA. IYSV infection was verified by reverse transcription (RT)-PCR. Total nucleic acids were prepared from symptomatic tissue, and primers specific to the small (S) RNA of IYSV were used to amplify an approximate 1.2-kb region of the S-RNA. This region included the complete nucleoprotein (N) gene (2). The amplicons from one sample each from Nevada and northern California were sequenced (GenBank Accession Nos. FJ713699 and FJ713700, respectively). Sequence analysis showed that the amplicons contained a single open reading frame of 822 bp, coding for a 273-amino acid N protein, and the gene shared 96 to 98% identity with known IYSV N gene sequences. To our knowledge, this is the first report of IYSV in onion in Nevada. In California, outbreaks of IYSV had been reported earlier in Imperial Valley and Antelope Valley in southern California (4), and the disease has been increasing in incidence in bulb and seed crops in northern California, as well. California and Nevada are major onion-producing states in the United States and regular surveys to determine the incidence and impact on yield are needed to develop an integrated disease management program. References: (1) D. H. Gent et al. Plant Dis. 90:1468, 2006. (2) H. R. Pappu et al. Arch. Virol. 151:1015, 2006. (3) H. R. Pappu and M. E. Matheron. Online publication. doi:10.1094/PHP-2008-0711-01-BR. Plant Health Progress, 2008. (4) G. J. Poole et al. Online publication. doi:10.1094/PHP-2007-0508-01-BR. Plant Health Progress, 2007.

An Outbreak of a Necrosis Disease of Tomato in California in 2008 was Caused by a New Ilarvirus Species Related to Parietaria mottle virus

During the 2008 early-summer growing season, virus-like necrosis symptoms, most similar to those induced by Tobacco streak virus (TSV), were observed in leaves, stems, and petioles of processing tomato plants in the Central Valley of California. Symptoms were observed in numerous fields in Merced, San Joaquin, and Yolo counties, though the incidence of the disease in most fields was not high (not more than 5% but over 20% in some areas). Antibody-based tests of representative samples of the disease for infection with Tomato spotted wilt virus, TSV, and Tomato apex necrosis virus, which cause similar symptoms, were negative. A putative virus-like agent was sap- and graft-transmitted to tomato plants and induced necrotic spots in leaves and stem and petiole necrosis symptoms that were similar to those observed in the field. Eventually, these plants recovered from these symptoms. In sap-transmission experiments, the virus-like agent induced systemic symptoms in Chenopodium quinoa and C. amaranticolor (stunted growth and leaf curl and necrosis), Nicotiana benthamiana (necrotic leaf and stem lesions), N. tabacum cvs. Havana and Turkish (stunted growth and necrotic etching and ringspots followed by recovery for cv. Havana but not for cv. Turkish), and Datura stramonium (mild mottle and ringspots in newly emerged leaves followed by recovery); no symptoms were observed in inoculated common bean (cv. Topcrop), pumpkin (cv. Small Sugar), pepper, and N. glutinosa plants. Virus minipurification was performed with leaves from noninfected and infected D. stramonium plants, and polyacrylamide gel electrophoresis analyses revealed a protein band of ~29 kDa in infected but not noninfected plants. This protein was purified and subjected to liquid chromatography-mass/mass spectrometry analysis. Four peptides, obtained from the trypsin-digested protein, each had the highest match (score of 118) with the capsid protein (CP) of Parietaria mottle virus (PMoV), an ilarvirus that induces leaf and stem necrosis in tomatoes in Europe (1). Using sequences of PMoV and other ilarviruses, a single primer was designed from the 3' nontranslated region and paired with primers designed from conserved regions of ilarvirus RNAs 1, 2, and 3. In reverse transcription-PCR analyses, these primer pairs directed the amplification of the expected-sized fragments for ilarvirus RNAs 1, 2, and 3 from RNA extracts prepared from leaves with the unusual necrosis symptoms. Sequence analyses confirmed these were ilarvirus fragments. Partial RNA 1, 2, and 3 sequences were 81, 84, and 82% identical, respectively, with those of PMoV and 80, 77, and 69% identical, respectively, with those of TSV. The amino acid sequence of the CP gene (GenBank Accession No. FJ236810) was 86 and 61% identical to those of PMoV and TSV, respectively. Together, these results indicate the necrosis disease of tomato is caused by a new ilarvirus species, tentatively named Tomato necrotic spot virus, although further studies are needed to confirm this. The mode of transmission of this new ilarvirus to tomatoes in the field is unknown, but it may involve thrips feeding on infected pollen, a known method of transmission for TSV (2). References: (1) L. Galipienso et al. Plant Pathol. 54:29, 2005. (2) R. Sdoodee and D. S. Teakle. Plant Pathol. 36:377, 1987.

Pet owners' attitudes and behaviours related to smoking and second-hand smoke: a pilot study

BACKGROUND

Although research indicates that second-hand smoke (SHS) harms both human and animal health, data on the percentage of pet owners who smoke or allow smoking in their homes are not readily available.

OBJECTIVE

To investigate pet owners' smoking behaviour and policies on smoking in their homes, and the potential for educational interventions to motivate change in pet owners' smoking behaviour.

METHODS

A web-based survey was used with 3293 adult pet owners. The main outcome measures were smoking behaviour of pet owners and their cohabitants; policies on smoking in pet owners' homes; and impact of information about the dangers of pet exposure to SHS on pet owners' smoking intentions.

RESULTS

Of respondents, 21% were current smokers and 27% of participants lived with at least one smoker. Pet owners who smoke reported that information on the dangers of pet exposure to SHS would motivate them to try to quit smoking (28.4%) and ask the people with whom they live to quit smoking (8.7%) or not to smoke indoors (14.2%). Moreover, non-smoking pet owners who live with smokers said that they would ask the people with whom they live to quit (16.4%) or not smoke indoors (24.2%) if given this information. About 40% of current smokers and 24% of non-smokers living with smokers indicated that they would be interested in receiving information on smoking, quitting, or SHS.

CONCLUSIONS

Educational campaigns informing pet owners of the risks of SHS exposure for pets could motivate some owners to quit smoking. It could also motivate these owners and non-smoking owners who cohabit with smokers make their homes smoke-free.

Synthesis and colloidal properties of polyether-magnetite complexes in water and phosphate-buffered saline

Biocompatible magnetic nanoparticles show great promise for many biotechnological applications. This paper addresses the synthesis and characterization of magnetite nanoparticles coated with poly(ethylene oxide) (PEO) homopolymers and amphiphilic poly(propylene oxide-b-ethylene oxide) (PPO-b-PEO) copolymers that were anchored through ammonium ions. Predictions and experimental measurements of the colloidal properties of these nanoparticles in water and phosphate-buffered saline (PBS) as functions of the polymer block lengths and polymer loading are reported. The complexes were found to exist as primary particles at high polymer compositions, and most formed small clusters with equilibrium sizes as the polymer loading was reduced. Through implementation of a polymer brush model, the size distributions from dynamic light scattering (DLS) were compared to those from the model. For complexes that did not cluster, the experimental sizes matched the model well. For complexes that clustered, equilibrium diameters were predicted accurately through an empirical fit derived from DLS data and the half-life for doublet formation calculated using the modified Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Deviation from this empirical fit provided insight into possible additional interparticle hydrophobic interactions for select complexes for which the DLVO theory could not account. While the polymers remained bound to the nanoparticles in water, most of them desorbed slowly in PBS. Desorption was slowed significantly at high polymer chain densities and with hydrophobic PPO anchor blocks. By tailoring the PPO block length and the number of polymer chains on the surface, flocculation of the magnetite complexes in PBS was avoided. This allows for in vitro experiments where appreciable flocculation or sedimentation will not take place within the specified time scale requirements of an experiment.

Study of film structure and adsorption kinetics of polyelectrolyte multilayer films: effect of pH and polymer concentration

The alternate adsorption of polycation poly(allylamine hydrochloride)(PAH) and the sodium salt of the polymeric dye poly(1-[ p-(3'-carboxy-4'-hydroxyphenylazo)benzenesulfonamido]-1,2-ethandiyl)(PCBS) on quartz crystals coated with silica was studied to understand the structural properties and adsorption kinetics of these films using a combination of quartz crystal microbalance with dissipation monitoring (QCM-D), absorbance, and ellipsometry measurements. In-situ deposition of the polycation PAH on QCM crystals was monitored, followed by rinsing with water and then deposition of the polyanion PCBS. The effects of polymer concentration and pH on film structure, composition and adsorption kinetics were probed. The polymers were adsorbed at neutral pH conditions and at elevated pH conditions where PAH was essentially uncharged to obtain much thicker films. The change in the resonant frequency, Deltaf, of the QCM-D showed a linear decrease with the number of bilayers, a finding consistent with absorbance and ellipsometric thickness measurements which showed linear growth of film thickness. By using the Delta f ratios of PCBS to PAH, the molar ratios of repeat units of PCBS to PAH in the bilayer films as determined by QCM-D were approximately 1:1 at polyelectrolyte concentrations 5-10 mM repeat unit, indicating complete dissociation of the ionic groups. The frequency and dissipation data from the QCM-D experiments were analyzed with the Voigt model to estimate the thickness of the hydrated films which were then compared with thicknesses of dry films measured by ellipsometry. This led to estimates of the water content of the films to be approximately 45 wt %. In addition to the QCM-D, some films were also characterized by a QCM which measures only the first harmonic without dissipation monitoring. For the deposition conditions studied, the deposited mass values measured by the QCM's first harmonic were similar to the results obtained using higher harmonics from QCM-D, indicating that the self-assembled polyelectrolyte films were rigid.

Stability of polydimethylsiloxane-magnetite nanoparticle dispersions against flocculation: interparticle interactions of polydisperse materials

The colloidal stability of dispersions comprised of magnetite nanoparticles coated with polydimethylsiloxane (PDMS) oligomers was investigated theoretically and experimentally. Particle-particle interaction potentials in a theta solvent and in a good solvent for the PDMS were predicted by calculating van der Waals, electrostatic, steric, and magnetic forces as functions of interparticle separation distances. A variety of nanoparticle sizes and size distributions were considered. Calculations of the interparticle potential in dilute suspensions indicated that flocculation was likely for the largest 1% of the population of particles. Finally, the rheology of these complexes over time in the absence of a solvent was measured to probe their stabilities against flocculation as neat fluids. An increase in viscosity was observed upon aging, suggesting that some agglomeration occurs with time. However, the effects of aging could be removed by exposing the sample to high shear, indicating that the magnetic fluids were not irreversibly flocculated.

First Report of Rhizoctonia solani on Mung Bean (Vigna radiata) Sprouts in California

In March 2007, mung bean (Vigna radiata) sprouts produced in an indoor sprouting facility in northern California developed brown lesions beginning 5 days after germination. Dark brown-to-reddish brown lesions with distinct margins developed on the stem, hypocotyl, and first true leaves of affected sprouts. Although all seed is routinely soaked in 20,000 mg Ca(OCl)₂/liter of water for 15 min before germination, approximately 5 to 10% of the bean sprouts in several growing baskets (1.5 × 1.5 m) were affected and had to be discarded. Each basket contained approximately 1 t of sprouts. To isolate the causal organism, symptomatic stems were surface disinfested for 1 min in 0.5% NaOCl and incubated on acidified potato dextrose agar (PDA) at 25°C. Cultures were identified as Rhizoctonia solani on the basis of morphological features including right-angled branching of brown hyphae and the presence of sclerotia. PCR amplification of the internal transcribed spacer region was performed with primers RS1 and RS4 (2). Sequences were identical to R. solani AG4-HG-II in GenBank (Accession No. AF354074). To conduct pathogenicity tests, a 5-mm²-diameter disk from the margin of a culture of the fungus on PDA was placed in the center of 25 5-day-old germinated sprouts placed in a plastic box (15 × 10 × 5 cm) held at 25°C. Two isolates of R. solani cultured from different lots of sprouts were included in the assays. Controls received noncolonized agar. Treatments were replicated four times and each experiment was repeated three times. A moist paper towel was included in each box to maintain humidity. After 3 days, symptoms developed in the inoculated boxes but not in the noninoculated boxes. The fungus was reisolated from lesions, completing Koch's postulates. To our knowledge, this is the first report of R. solani on mung bean sprouts in a commercial sprouting facility. However, R. solani has been associated with root rot of mung bean plants in the field (1). References: (1) T. R. Anderson. Can. Plant Dis. Surv. 65:1, 1985. (2) C. Guillemaut et al. Can. J. Microbiol. 49:556, 2003.

British American Tobacco ghost-wrote reports on tobacco advertising bans by the International Advertising Association and J J Boddewyn

In 1983 and 1986, the International Advertising Association (IAA) published an original version and then a revision of a report entitled “Tobacco Advertising Bans and Consumption in 16 Countries,” which were edited by J J Boddewyn, a marketing professor. The reports concluded that tobacco advertising bans have not been accompanied by any significant reduction in tobacco consumption. Opponents of tobacco advertising restrictions trumpeted the IAA reports in print materials, media communications and legislative hearings during the 1980s and beyond. A new analysis of tobacco industry documents and transcripts of tobacco litigation testimony reveals that British American Tobacco ghost-wrote the IAA reports and that the Tobacco Institute (the trade association then representing the major US cigarette manufacturers) helped to arrange for Boddewyn to present the findings to the US Congress and the media. Further research on tobacco industry documents and tobacco litigation transcripts should assess whether tobacco industry sources were responsible for ghost-writing other studies favourable to the industry.

Aqueous dispersions of magnetite nanoparticles complexed with copolyether dispersants: experiments and theory

Magnetite (Fe3O4) nanoparticles have been synthesized and complexed with carboxylate-functional block copolymers, and then aqueous dispersions of the complexes were investigated as functions of their chemical and morphological structures. The block copolymer dispersants had either poly(ethylene oxide), poly(ethylene oxide-co-propylene oxide), or poly(ethylene oxide-b-propylene oxide) outer blocks, and all of them had a polyurethane center block that contained pendent carboxylate groups. The complexes were formed through interactions of the carboxylates with the surfaces of the magnetite nanoparticles. The magnetite cores of the magnetite-copolymer complexes were near 10 nm in diameter, and the particles were superparamagnetic. Complexes with mass ratios of polymer to magnetite varying from 50:50 to 85:15 were studied. One of our objectives is to design complexes that form stable dispersions of discrete particles in water, yet that can be actuated (moved together) upon exposure to a uniform magnetic field. DLVO calculations that accounted for magnetic attractive interparticle forces, as well as van der Waals, steric, and electrostatic forces are presented. Compositions were identified wherein a shallow, attractive interparticle potential minimum appears once the magnetic term is applied. This suggests that it may be possible to tune the structures of superparamagnetic nanoparticle shells to allow discrete dispersions without a field, yet weak flocculation could be induced upon exposure to a field.

Host Range and Phylogeny of Fusarium solani f. sp. eumartii from Potato and Tomato in California

Fusarium solani f. sp. eumartii, historically considered solely a pathogen of potato (Solanum tuberosum), was associated with tomato plants (Lycopersicon esculentum) exhibiting foot rot symptoms in California. The pathogenicity of California isolates of F. solani f. sp. eumartii from potato plants with Eumartii wilt symptoms and tomato plants with foot rot symptoms was determined on potato, tomato, pepper (Capsicum anuum), and eggplant (S. melongena). Isolates from both potato and tomato caused dry rot symptoms on potato tubers and root or collar rot on all four host species in the greenhouse. In field trials, isolates from both tomato and potato were pathogenic on tomato, potato, and pepper, confirming that the host range of F. solani f. sp. eumartii is not limited to potato. The phylogeny of isolates from potato and tomato was determined based on sequences of two DNA fragments: rDNA internal transcribed spacer regions and partial sequences of elongation factor 1-α. All of the California isolates of F. solani f. sp eumartii from tomato and potato formed a single monophyletic clade distinct from other formae speciales and mating populations of F. solani. The results of this study demonstrate that Eumartii wilt and tomato foot rot in California both are caused by F. solani f. sp. eumartii.

Efficacy of Germination Stimulants of Sclerotia of Sclerotium cepivorum for Management of White Rot of Garlic

The ability of soil-applied garlic powder and diallyl disulfide to stimulate germination of sclerotia of Sclerotium cepivorum, the cause of white rot of onion and garlic, was evaluated in four field trials. Because sclerotia germinate in response to exudation of specific volatile sulfides and thiols from allium roots, sulfides applied to the ground in the absence of an allium crop cause death of the sclerotia after they germinate and exhaust nutrient reserves. In this study, garlic powder and a synthetic garlic oil, diallyl disulfide, were incorporated into the soil in commercial fields naturally infested with S. cepivorum. Methyl bromide was included as a chemical control. Within 3 months after treatment, over 90% of the sclerotia died in the plots treated with the germinationstimulants, which was similar to the reduction of viable sclerotia achieved with an application of methyl bromide. The degree of sclerotial mortality in plots treated with garlic powder at 112 kg/ha or more was almost equal to that achieved by diallyl disulfide at 0.5 ml/m² or methyl bromide at 448 kg/ha. Despite the efficacy of the stimulants and methyl bromide to reduce populations of sclerotia, the pathogen caused substantial root rot and yield losses in subsequent garlic crops planted about a year after soil treatment. However, germination stimulants have utility because the reduction of the vast majority of sclerotia in a field reduces the risk of spread of the pathogen to neighboring fields.

Radical nanomedicine

Nanotechnology has made significant advances in the reduction of free radical damage in the field of materials science. Cross-disciplinary interactions and the application of this technology to biological systems has led to the elucidation of novel nanoparticle antioxidants, which are the subject of this review. Recent reports suggest that cerium oxide and other nanoparticles are potent, and probably regenerative, free radical scavengers in vitro and in vivo. The neuroprotective, longevity-enhancing and anti-inflammatory properties of nanoparticles are summarized and hypotheses regarding their unique mechanism of action are presented. The chemical and physical properties of antioxidant nanoparticles are discussed in an interdisciplinary manner, with emphasis on biological properties and biomedical applications. Additionally, the need for alterations in traditional pharmacological parameters of dose and absorption, distribution, metabolism, and excretion are discussed and future directions necessary for bringing nanoparticle antioxidants into the realm of clinical reality are presented.

Methylenetetrahydrofolate reductase C677T and A1298C variants do not affect ongoing pregnancy rates following IVF

BACKGROUND

There is concern that IVF could compromise normal imprinting and methylation of DNA. Methylenetetrahydrofolate reductase (MTHFR) regulates the flow of folic acid-derived, one-carbon moieties for methylation and is critical to early embryonic development. Therefore, we hypothesized that common polymorphisms in MTHFR could associate with IVF outcome.

METHODS

MTHFR C677T and A1298C polymorphism genotyping was performed on 374 subjects for this study, representing 197 couples undergoing IVF in a university setting from July 2005 to January 2006. Analysis of variance (ANOVA), chi-square and/or multivariate analyses were used to assess whether these polymorphisms are associated with embryo quality or with ongoing pregnancy or spontaneous abortion rates.

RESULTS

Allele frequencies for C677T ( p=0.67, q=0.33) and A1298C ( p=0.71, q=0.29) were in Hardy-Weinberg equilibrium. The C677T and A1298C variants, either alone or in combination, did not associate with embryo quality or short-term pregnancy outcome.

CONCLUSIONS

The common polymorphisms in MTHFR are not associated with embryo quality, as defined by cell number or fragmentation score, or with short-term pregnancy outcomes. Therefore, in our population in which women receive adequate folic acid, MTHFR genotypes are not informative in explaining IVF failure. Further studies, however, examining birth outcomes and the other enzymes in the folic acid pathway are warranted.

First Report of Ramularia carthami, Causal Agent of Ramularia Leaf Spot of Safflower, in California

Ramularia leaf spot was identified in several fields of safflower (Carthamus tinctorius) near Gridley, CA in June 2005. Numerous circular to irregularly shaped brown lesions, 3 to 10 mm in diameter, on both sides of leaves and flower bracts resulted in stunted plants and reduced seed production. In two of the fields, nearly all plants were affected, yields were severely reduced, and the crops were abandoned. Ramularia carthami Zaprom. was identified on the basis of morphology of reproductive structures on colonized leaves (1). Hyaline, thin-walled, aseptate conidiophores (2.6 to 4.3 × 28.8 to 72.0 μm) were produced in fan-like fascicles borne on hemispherical stromata (21.6 to 31.2 × 24.0 to 36.0 μm). Hyaline, smooth, cylindrical to fusiform conidia (7.2 to 12.0 × 19.2 to 40.8 μm), 1 to 3 septate or rarely aseptate were produced singly or in short chains. The fungus was isolated from symptomatic leaves and bracts surface disinfected for 1 min in 0.5% sodium hypochlorite and incubated at 25°C on acidified potato dextrose agar (APDA). Colonies of the fungus were white with irregular margins and were slow growing. After 3 weeks, colonies were approximately 3 cm in diameter. Conidia were not produced in culture. To conduct pathogenicity tests, three 3-week-old safflower plants grown in the greenhouse were sprayed with an aqueous suspension of mycelial fragments of the fungus. Inoculum was produced by macerating a 3-cm-diameter APDA culture of the fungus in 30 ml of water. Noninoculated control plants were sprayed with water. All plants were covered with plastic bags for 48 h on a greenhouse bench. Greenhouse temperatures ranged from a minimum of 20°C to a maximum of 27°C. After 7 days, all inoculated plants developed symptoms, and the fungus was reisolated from lesions. Conidia from lesions were suspended in water and diluted to a concentration of 1 × 10⁵ conidia/ml and used as inoculum for additional pathogenicity tests. Three plants were sprayed with the conidial suspension or water as above. Lesions developed on the inoculated plants in 7 days, and the fungus was reisolated. No symptoms developed on plants sprayed with water. Both pathogenicity tests were repeated once. Sequence of the internal transcribed spacer region of rDNA of the fungus was deposited in GenBank (Accession No. DQ466083). To our knowledge, this is the first confirmed report of Ramularia leaf spot of safflower caused by R. carthami in California. Reference: (1) Morbi Plant. Script. Sect. Phytopath. Hort. Bot. Prince. USSR 15:142, 1926.

Efficient, thermally stable, second order nonlinear optical response in organic hybrid covalent/ionic self-assembled films

A covalent/electrostatic layer-by-layer self-assembly method was used to achieve polar ordering of a water soluble, reactive dye in the fabrication of nonlinear optical (NLO) films. We observed a quadratic relationship between the second harmonic intensity I2(omega) and bilayer number for all films made with Procion Brown MX-GRN, demonstrating that the polar ordering of the chromophores is consistent in each successive bilayer. As the ionic strength of the dye deposition solution was increased to 0.5 M NaCl, the of the films increased by approximately 250% to 50 x 10(-9) esu, with a corresponding average chromophore tilt angle of 38 degrees . This was attributed to increased shielding of the dye charges which led to higher chromophore density in the bilayers. The electrooptic coefficient for films of 50 bilayers fabricated at 0.5 M NaCl was 14 +/- 2 pm/V. Importantly, these films exhibited excellent thermal stability, with only a 10% decrease in (I2(omega))(1/2) after 36 h at 85 degrees C and then 24 h at 150 degrees C. Furthermore, the (I2(omega))(1/2) recovered completely upon cooling to room temperature. These results with a commodity textile dye point to the potential value of this class of reactive chromophores and this self-assembly method for fabrication of electrooptic materials at ambient conditions from aqueous solutions.

First Report of Damping-Off of Wild Rice in California Caused by Pythium torulosum

During 1994, damping-off of wild rice (Zizania palustris L.) in a single field in eastern Shasta County, CA resulted in near total stand failure. Since then, the disease was observed in at least 11 other fields with varying levels of stand loss. In all cases, the affected wild rice was grown as a volunteer crop following one or more years of wild rice production. Symptoms included a dark red discoloration and necrosis of the primary root followed by seedling death. When the red discoloration was limited to secondary roots, the plants often survived. Pythium torulosum, readily recovered from symptomatic roots by isolation on PARP media, was identified by morphological structures produced on grass blades in water (homothallic with smooth-walled oogonia, plerotic oospores, monoclinous antheridia, and inflated filamentous sporangia) and a 99.2% internal transcribed spacer sequence similarity of the rDNA (1). To complete Koch's postulates, inoculum of two isolates of P. torulosum grown on moistened cornmeal/sand (2%/98% [v/v]) for 3 weeks at 25°C were combined and mixed into sterilized sandy loam soil at a rate of 30 cm³ inoculum per liter of soil. Sterilized noninfested soil was used as a control treatment. Twenty wild rice seeds (cv. Franklin) were sown in each of four replicate 20-cm-diameter pots in each treatment. Plants were submerged in water and maintained in a greenhouse at 18 to 25°C. After 8 weeks, plants stands were reduced 50% in infested pots; dry weights of infected plants were reduced by 45% relative to the controls. The fungus was reisolated from symptomatic plants but not from the plants grown in noninfested soil. The experiment was repeated with similar results. To our knowledge, this is the first report of damping-off of wild rice caused by P. torulosum. Reference: (1) C. A. Levesque and W. A. M. DeCock. Mycol. Res. 108:1363, 2004.

Cloning Strategy for Producing Brush-Forming Protein-Based Polymers

Brush-forming polymers are being used in a variety of applications, and by using recombinant DNA technology, there exists the potential to produce protein-based polymers that incorporate unique structures and functions in these brush layers. Despite this potential, production of protein-based brush-forming polymers is not routinely performed. For the design and production of new protein-based polymers with optimal brush-forming properties, it would be desirable to have a cloning strategy that allows an iterative approach wherein the protein based-polymer product can be produced and evaluated, and then if necessary, it can be sequentially modified in a controlled manner to obtain optimal surface density and brush extension. In this work, we report on the development of a cloning strategy intended for the production of protein-based brush-forming polymers. This strategy is based on the assembly of modules of DNA that encode for blocks of protein-based polymers into a commercially available expression vector; there is no need for custom-modified vectors and no need for intermediate cloning vectors. Additionally, because the design of new protein-based biopolymers can be an iterative process, our method enables sequential modification of a protein-based polymer product. With at least 21 bacterial expression vectors and 11 yeast expression vectors compatible with this strategy, there are a number of options available for production of protein-based polymers. It is our intent that this strategy will aid in advancing the production of protein-based brush-forming polymers.