Cryoprotection of humanin-like peptides in seminal plasma for ejaculated spermatozoa of crossbred bulls

BACKGROUND

Cryopreservation process negatively affects spermatozoa functions. Humanin, a small polypeptide encoded in the mitochondrial genome, is well known for its role in cell survival.

OBJECTIVE

To quantify the endogenous levels of humanin in seminal plasma of crossbred Frieswal bulls and to study its role in cryoprotection. The presence of humanin in bull spermatozoa was also investigated.

MATERIALS AND METHODS

A total of 40 semen samples were separated into two groups based on the initial progressive motility (IPM): Good (IPM >70%) and Poor (IPM <50%) groups; and/or based on the post-thaw motility (PTM): Freezable (PTM>50%) and Non-freezable (PTM < 50%) groups. Humanin concentration in seminal plasma (SP-HN) was quantified using ELISA.

RESULTS

SP-HN concentration ranged from undetectable to 67.6 pg/mL with a median level of 35.2 pg/mL. SP-HN level was significantly higher in the good quality semen group than in the poor quality semen group (p<0.001), and also significantly higher in the freezable group than in the non-freezable group (p<0.001). SP-HN level was positively correlated with initial progressive motility, post-thaw semen motility, viability, acrosome intactness and plasma membrane integrity, but negatively correlated the level of reactive oxygen species and malondialdehyde content. Immunochemical localization showed the presence of humanin in the proximal region of the middle piece of spermatozoa.

CONCLUSION

Endogenous humanin level had significant correlation with semen quality and might protect sperm cells against freeze-induced oxidative stress. doi.org/10.54680/fr22510110712.

Hydroxy-Functionalized Hypercrosslinked Polymers (HCPs) as Dual Phase Radioactive Iodine Scavengers: Synergy of Porosity and Functionality

Large-scale nuclear power plant production of iodine radionuclides (129 I, 131 I) pose huge threat in the events of nuclear disaster. Effective removal of radioiodine from nuclear waste is one of the most critical challenge because of the drawbacks of state-of-the-art adsorbents such as high cost, low uptake capacity and non-recyclability. Herein, two hydroxy-functionalized (-OH) hypercrosslinked polymers (HCPs), namely HCP-91 and HCP-92, have been synthesized and employed towards capture of iodine. High chemical stability along with synergistic harmony of high porosity and functionality of these materials makes them suitable candidates for capture of iodine from both vapor phase and water medium. Moreover, both the HCPs showed superior iodine removal performance from water in terms of fast kinetics and high removal efficiency (2.9 g g-1 and 2.49 g g-1 for HCP-91 and HCP-92 respectively). The role of functionality (-OH groups) and porosity has been established with the help of HCP-91, HCP-92 and non-functionalized biphenyl HCP for the efficient capture of I3 - ions from water. In addition, both HCPs exhibited excellent selectivity and recyclability towards triiodide ions, rendering the potential of these materials towards real-time applications. Lastly, Density functional theoretical studies revealed key insights and corroborate well with the experimental findings.

Trap Inlaid Cationic Hybrid Composite Material for Efficient Segregation of Toxic Chemicals from Water

Metal-based oxoanions are potentially toxic pollutants that can cause serious water pollution. Therefore, the segregation of such species has recently received significant research attention. Even though several adsorbents have been employed for effective management of chemicals, their limited microporous nature along with non-monolithic applicability has thwarted their large-scale real-time application. Herein, we developed a unique anion exchangeable hybrid composite aerogel material (IPcomp-6), integrating a stable cationic metal-organic polyhedron with a hierarchically porous metal-organic gel. The composite scavenger demonstrated a highly selective and very fast segregation efficiency for various hazardous oxoanions such as, HAsO₄ ^2- , SeO₄ ^2- , ReO₄ ^- , CrO₄ ^2- , MnO₄ ^- , in water, in the presence of 100-fold excess of other coexisting anions. The material was able to selectively eliminate trace HAsO₄ ^2- even at low concentration to well below the As^V limit in drinking water defined by WHO.

Variations in extra-hepatic biliary tree morphology and morphometry: a narrative review of literature with focus on cystohepatic triangle

The morphometry and morphology of the components of extrahepatic biliary tree show extensive variations. A beforehand recognition of these variations is very crucial to prevent unintended complications while performing surgeries in this region. This study was conducted to analyse the configuration of the extrahepatic biliary tree and its possible variations, as well as measure the components that limit the cystohepatic triangle. Articles were searched in major online indexed databases (Medline and PubMed, Scopus, Embase, CINAHL Plus, Web of Science and Google Scholar) using relevant key words. A total of 73 articles matched the search criteria of which 55 articles were identified for data extraction. The length of left and right hepatic duct in majority of studies was found to be > 10 mm. A wide range of diameters of hepatic ducts were observed between 5 and 43 mm. The average length of cystic duct is around 20 mm. The length and diameter of the common bile duct are 50-150 mm and 3-9 mm, respectively. The most frequently observed pattern of insertion of cystic duct into common hepatic duct is right lateral, rarely anterior, or posterior spiral insertion can present. The results of this study will provide a standard reference range which instead will help to differentiate the normal and pathological conditions.

How Reproducible are Surface Areas Calculated from the BET Equation?

Porosity and surface area analysis play a prominent role in modern materials science. At the heart of this sits the Brunauer-Emmett-Teller (BET) theory, which has been a remarkably successful contribution to the field of materials science. The BET method was developed in the 1930s for open surfaces but is now the most widely used metric for the estimation of surface areas of micro- and mesoporous materials. Despite its widespread use, the calculation of BET surface areas causes a spread in reported areas, resulting in reproducibility problems in both academia and industry. To prove this, for this analysis, 18 already-measured raw adsorption isotherms were provided to sixty-one labs, who were asked to calculate the corresponding BET areas. This round-robin exercise resulted in a wide range of values. Here, the reproducibility of BET area determination from identical isotherms is demonstrated to be a largely ignored issue, raising critical concerns over the reliability of reported BET areas. To solve this major issue, a new computational approach to accurately and systematically determine the BET area of nanoporous materials is developed. The software, called "BET surface identification" (BETSI), expands on the well-known Rouquerol criteria and makes an unambiguous BET area assignment possible.

Hypertriton Production in p-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

The study of nuclei and antinuclei production has proven to be a powerful tool to investigate the formation mechanism of loosely bound states in high-energy hadronic collisions. The first measurement of the production of _{Λ}^{3}H in p-Pb collisions at sqrt[s_{NN}]=5.02  TeV is presented in this Letter. Its production yield measured in the rapidity interval -1<y<0 for the 40% highest-multiplicity p-Pb collisions is dN/dy=[6.3±1.8(stat)±1.2(syst)]×10^{-7}. The measurement is compared with the expectations of statistical hadronization and coalescence models, which describe the nucleosynthesis in hadronic collisions. These two models predict very different yields of the hypertriton in charged particle multiplicity environments relevant to small collision systems such as p-Pb, and therefore the measurement of dN/dy is crucial to distinguish between them. The precision of this measurement leads to the exclusion with a significance larger than 6.9σ of some configurations of the statistical hadronization model, thus constraining the theory behind the production of loosely bound states at hadron colliders.

Unveiling the Impact of Diverse Morphology of Ionic Porous Organic Polymers with Mechanistic Insight on the Ultrafast and Selective Removal of Toxic Pollutants from Water

In recent years, detoxification of contaminated water by different types of materials has received a great deal of attention. However, lack of methodical in-depth understanding of the role of various physical properties of such materials toward improved sorption performance limits their applicable efficiencies. In perspective, decontamination of oxoanion-polluted water by porous materials with different morphologies are unexplored due to a shortfall of proper synthetic strategies. Herein, systematic optimization of sequestration performance toward efficient decontamination of toxic oxoanion-polluted water has been demonstrated by varying the morphologies of an imidazolium-based cationic polymeric network [ionic porous organic polymers (iPOP-5)]. Detailed morphological evolution showed that the chemically stable ionic polymer exhibited several morphologies such as spherical, nanotube, and flakes. Among them, the flakelike material [iPOP-5(F)] showed ultrafast capture efficiency (up to ∼99 and >85% removal within less than 1 min) with high saturation capacities (301 and 610 mg g^-1) toward chromate [Cr(VI)] and perrhenate [Re(VII)] oxoanions, respectively, in water. On the other hand, the spherical-shaped polymer [iPOP-5(S)] exhibited relatively slow removal kinetics (>5 min for complete removal) toward both Cr(VI) and Re(VII) oxoanions. Notably, iPOP-5(F) eliminated Cr(VI) and Re(VII) selectively even in the presence of excessive (∼100-fold) competing anions from both high- and low-concentration contaminated water. Further, the compound demonstrated efficient separation of those oxoanions in a wide pH range as well as in various water systems (such as potable, lake, river, sea, and tannery water) with superior regeneration ability. Moreover, as a proof of concept, a column exchange-based water treatment experiment by iPOP-5(F) has been performed to reduce the concentration of Cr(VI) and Re(VII) below the WHO permitted level. Mechanistic investigation suggested that the rare in situ exfoliation of flakes into thin nanosheets helps to achieve ultrafast capture efficiency. In addition, detailed theoretical binding energy calculations were executed in order to understand such rapid, selective binding of chromate and perrhenate oxoanions with iPOP-5(F) over other nonmetal-based anions.

Correlation between dissolved oxygen level, antioxidants and oxidants in semen diluted with partially deoxygenated extender at various stages of cryopreservation

BACKGROUND

Dissolved oxygen (DO) in semen dilutor may lead to the production of reactive oxygen species (ROS) and buffalo sperm may become more prone to deleterious effects of ROS due to the presence of high amounts of polyunsaturated fatty acids (PUFAs) in their membranes.

OBJECTIVE

To study the correlation between dissolved oxygen level, antioxidants and oxidants in semen diluted with partially deoxygenated extender at various stages of cryopreservation.

MATERIALS AND METHODS

Each semen sample was split into two aliquots viz., Aliquot I [diluted with Extender I (control: without deoxygenation)] and Aliquot II [diluted with Extender II: partially deoxygenated by liquid nitrogen (LN) flushing], which were diluted, filled in straws, cryopreserved and evaluated post-thaw.

RESULTS

The DO levels (P < 0.05) decreased significantly after LN flushing of the extender and they increased significantly (P < 0.05) in post-thaw semen. The progressive motility, viability, hypo-osmotic swelling response, acrosomal integrity, glutathione peroxidase (GPx), total antioxidant capacity (TAC) and superoxide dismutase (SOD) decreased significantly (P < 0.05) in both control and treated semen after thawing. SOD and TAC were positively correlated in semen treated with normal extender at the pre-freeze stage; however, in semen treated with partially deoxygenated extender, no correlation was found between SOD and TAC at the pre-freeze stage. ROS and total TAC were negatively correlated in semen treated with partially deoxygenated extender at the pre-freeze stage; however, no correlation was found between ROS and TAC in control semen.

CONCLUSION

The partial deoxygenation of extender affects the correlation between sperm quality parameters, antioxidants, and oxidants during different stages of semen cryopreservation. doi.org/10.54680/fr22310110712.

Polarization of Λ and Λ[over ¯] Hyperons along the Beam Direction in Pb-Pb Collisions at sqrt[s]_{NN}=5.02 TeV

The polarization of the Λ and Λ[over ¯] hyperons along the beam (z) direction, P_{z}, has been measured in Pb-Pb collisions at sqrt[s_{NN}]=5.02  TeV recorded with ALICE at the Large Hadron Collider (LHC). The main contribution to P_{z} comes from elliptic flow-induced vorticity and can be characterized by the second Fourier sine coefficient P_{z,s2}=⟨P_{z}sin(2φ-2Ψ_{2})⟩, where φ is the hyperon azimuthal emission angle and Ψ_{2} is the elliptic flow plane angle. We report the measurement of P_{z,s2} for different collision centralities and in the 30%-50% centrality interval as a function of the hyperon transverse momentum and rapidity. The P_{z,s2} is positive similarly as measured by the STAR Collaboration in Au-Au collisions at sqrt[s_{NN}]=200  GeV, with somewhat smaller amplitude in the semicentral collisions. This is the first experimental evidence of a nonzero hyperon P_{z} in Pb-Pb collisions at the LHC. The comparison of the measured P_{z,s2} with the hydrodynamic model calculations shows sensitivity to the competing contributions from thermal and the recently found shear-induced vorticity, as well as to whether the polarization is acquired at the quark-gluon plasma or the hadronic phase.

Variations in the branching pattern of tibial nerve in foot: a review of literature and relevant clinical anatomy

Considerable variations have been reported regarding the branching pattern of tibial nerve (TN) close to its termination in foot. In order to comprehend the clinical anatomy of heel pain awareness of all the possible variations in relation to terminal branching pattern of TN (close to the tarsal tunnel) is essential. The present study was conducted to undertake a comprehensive review of the variations in tibial nerve branches in foot with particular emphasis on the implications for sensory distribution of these branches. Articles were searched in major online indexed databases using relevant key words. The pattern of termination of TN was noted as either trifurcation or bifurcation. Bifurcation pattern was more commonly observed and is associated with the medial calcaneal nerve (MCN) either arising high or low relative to the tarsal tunnel. The most commonly noted type of bifurcation was proximal to malleolar-calcaneal axis but within the tarsal tunnel. Across all five types of bifurcation reported in literature the termination point of TN ranged from 3 cm proximal to 3 cm distal to malleolar-calcaneal axis and therefore the area beyond this region can be considered as safe zone for performing invasive procedures. MCN showed considerable variations in its origin both in trifurcation and bifurcation pattern pertaining to number of branches (one/two/three) at the point of origin. The origin of inferior calcaneal nerve (ICN) was observed to be relatively less variable as it mostly arose as a branch of lateral plantar nerve (LPN) and sometimes as a direct branch from TN before termination. The frequent variation of MCN in the tarsal tunnel should be kept in mind while undertaking decompression measures in medial ankle region.

Unfolding the Role of Building Units of MOFs with Mechanistic Insight Towards Selective Metal Ions Detection in Water

The potential emergence of fluorescence-based techniques has propelled research towards developing probes that can sense trace metal ions specifically. Although luminescent metal-organic frameworks (MOFs) are well suited for this application, the role of building blocks towards detection is not fully understood. In this work, a systematic screening by varying number of Lewis basic (pyridyl-N atoms) sites is carried out in a series of isostructural, robust UiO-67 MOFs, and targeting a model metal ion-Fe³⁺ . All the three fluorescent MOFs are seen to present quenching response towards Fe³⁺ ions in water. However, UiO-67@N exhibits highly selective and sensitive response, whereas emission of both UiO-67 and UiO-67@NN is quenched by several metal ions. Detailed experimental and theoretical mechanistic investigation is carried out in addition to demonstration of UiO-67@N being able to sense trace amount of Fe³⁺ ions in synthetic biological water sample. Further, UiO-67@N based mixed-matrix membrane (MMM) has been prepared and employed to mimic the real time Fe³⁺ ions detection in water.

Measurement of the Groomed Jet Radius and Momentum Splitting Fraction in pp and Pb-Pb Collisions at sqrt[s_{NN}]=5.02 TeV

This article presents groomed jet substructure measurements in pp and Pb-Pb collisions at sqrt[s_{NN}]=5.02  TeV with the ALICE detector. The soft drop grooming algorithm provides access to the hard parton splittings inside a jet by removing soft wide-angle radiation. We report the groomed jet momentum splitting fraction, z_{g}, and the (scaled) groomed jet radius, θ_{g}. Charged-particle jets are reconstructed at midrapidity using the anti-k_{T} algorithm with resolution parameters R=0.2 and R=0.4. In heavy-ion collisions, the large underlying event poses a challenge for the reconstruction of groomed jet observables, since fluctuations in the background can cause groomed parton splittings to be misidentified. By using strong grooming conditions to reduce this background, we report these observables fully corrected for detector effects and background fluctuations for the first time. A narrowing of the θ_{g} distribution in Pb-Pb collisions compared to pp collisions is seen, which provides direct evidence of the modification of the angular structure of jets in the quark-gluon plasma. No significant modification of the z_{g} distribution in Pb-Pb collisions compared to pp collisions is observed. These results are compared with a variety of theoretical models of jet quenching, and provide constraints on jet energy-loss mechanisms and coherence effects in the quark-gluon plasma.

Measurement of Prompt D^{0}, Λ_{c}^{+}, and Σ_{c}^{0,++}(2455) Production in Proton-Proton Collisions at sqrt[s]=13 TeV

The p_{T}-differential production cross sections of prompt D^{0}, Λ_{c}^{+}, and Σ_{c}^{0,++}(2455) charmed hadrons are measured at midrapidity (|y|<0.5) in pp collisions at sqrt[s]=13  TeV. This is the first measurement of Σ_{c}^{0,++} production in hadronic collisions. Assuming the same production yield for the three Σ_{c}^{0,+,++} isospin states, the baryon-to-meson cross section ratios Σ_{c}^{0,+,++}/D^{0} and Λ_{c}^{+}/D^{0} are calculated in the transverse momentum (p_{T}) intervals 2<p_{T}<12 and 1<p_{T}<24  GeV/c. Values significantly larger than in e^{+}e^{-} collisions are observed, indicating for the first time that baryon enhancement in hadronic collisions also extends to the Σ_{c}. The feed-down contribution to Λ_{c}^{+} production from Σ_{c}^{0,+,++} is also reported and is found to be larger than in e^{+}e^{-} collisions. The data are compared with predictions from event generators and other phenomenological models, providing a sensitive test of the different charm-hadronization mechanisms implemented in the models.