The Sphingomonas plasmid pCAR3 is involved in complete mineralization of carbazole

We determined the complete 254,797-bp nucleotide sequence of the plasmid pCAR3, a carbazole-degradative plasmid from Sphingomonas sp. strain KA1. A region of about 65 kb involved in replication and conjugative transfer showed similarity to a region of plasmid pNL1 isolated from the aromatic-degrading Novosphingobium aromaticivorans strain F199. The presence of many insertion sequences, transposons, repeat sequences, and their remnants suggest plasticity of this plasmid in genetic structure. Although pCAR3 is thought to carry clustered genes for conjugative transfer, a filter-mating assay between KA1 and a pCAR3-cured strain (KA1W) was unsuccessful, indicating that pCAR3 might be deficient in conjugative transfer. Several degradative genes were found on pCAR3, including two kinds of carbazole-degradative gene clusters (car-I and car-II), and genes for electron transfer components of initial oxygenase for carbazole (fdxI, fdrI, and fdrII). Putative genes were identified for the degradation of anthranilate (and), catechol (cat), 2-hydroxypenta-2,4-dienoate (carDFE), dibenzofuran/fluorene (dbf/fln), protocatechuate (lig), and phthalate (oph). It appears that pCAR3 may carry clustered genes (car-I, car-II, fdxI, fdrI, fdrII, and, and cat) for the degradation of carbazole into tricarboxylic acid cycle intermediates; KA1W completely lost the ability to grow on carbazole, and the carbazole-degradative genes listed above were all expressed when KA1 was grown on carbazole. Reverse transcription-PCR analysis also revealed that the transcription of car-I, car-II, and cat genes was induced by carbazole or its metabolic intermediate. Southern hybridization analyses with probes prepared from car-I, car-II, repA, parA, traI, and traD genes indicated that several Sphingomonas carbazole degraders have DNA regions similar to parts of pCAR3.

Electron Transfer Complex Formation between Oxygenase and Ferredoxin Components in Rieske Nonheme Iron Oxygenase System

Carbazole 1,9a-dioxygenase (CARDO), a member of the Rieske nonheme iron oxygenase system (ROS), consists of a terminal oxygenase (CARDO-O) and electron transfer components (ferredoxin [CARDO-F] and ferredoxin reductase [CARDO-R]). We determined the crystal structures of the nonreduced, reduced, and substrate-bound binary complexes of CARDO-O with its electron donor, CARDO-F, at 1.9, 1.8, and 2.0 A resolutions, respectively. These structures provide the first structure-based interpretation of intercomponent electron transfer between two Rieske [2Fe-2S] clusters of ferredoxin and oxygenase in ROS. Three molecules of CARDO-F bind to the subunit boundary of one CARDO-O trimeric molecule, and specific binding created by electrostatic and hydrophobic interactions with conformational changes suitably aligns the two Rieske clusters for electron transfer. Additionally, conformational changes upon binding carbazole resulted in the closure of a lid over the substrate-binding pocket, thereby seemingly trapping carbazole at the substrate-binding site.

Functional and transcriptional analyses of the initial oxygenase genes for acenaphthene degradation from Sphingomonas sp. strain A4

Sphingomonas sp. strain A4 is capable of utilizing acenaphthene as its sole carbon and energy source. To isolate the genes responsible for acenaphthene degradation, transposon mutagenesis was performed on strain A4 and four mini-Tn5-inserted mutants lacking the ability to utilize acenaphthene were isolated. In three of the four mini-Tn5 inserted mutants, the mini-Tn5s were inserted into the same locus (within about 16 kb) as the arhA1A2 genes, which had previously been identified as the genes encoding the terminal oxygenase components for the initial oxygenation of acenaphthene. The nucleotide sequence analysis of the corresponding 16.4 kb DNA fragment revealed the existence of 16 ORFs and a partial ORF. From these ORFs, the genes encoding the ferredoxin (ArhA3) and ferredoxin reductase (ArhA4) complementary to ArhA1A2 were identified. RT-PCR analysis suggested that a 13.5 kb gene cluster, consisting of 13 ORFs and including all the arhA genes, forms an operon, although it includes several ORFs that are apparently unnecessary for acenaphthene degradation. Furthermore, using gene disruption and quantitative RT-PCR analyses, the LysR-type activator, ArhR, required for expression of the 13.5 kb gene cluster was also identified. Transcription of the gene cluster by ArhR was induced in the presence of acenaphthene (or its metabolite), and a putative binding site (T-N11-A motif) for ArhR was found upstream from the transcription start point of arhA3.

Plasmid pCAR3 contains multiple gene sets involved in the conversion of carbazole to anthranilate

The carbazole degradative car-I gene cluster (carAaIBaIBbICIAcI) of Sphingomonas sp. strain KA1 is located on the 254-kb circular plasmid pCAR3. Carbazole conversion to anthranilate is catalyzed by carbazole 1,9a-dioxygenase (CARDO; CarAaIAcI), meta-cleavage enzyme (CarBaIBbI), and hydrolase (CarCI). CARDO is a three-component dioxygenase, and CarAaI and CarAcI are its terminal oxygenase and ferredoxin components. The car-I gene cluster lacks the gene encoding the ferredoxin reductase component of CARDO. In the present study, based on the draft sequence of pCAR3, we found multiple carbazole degradation genes dispersed in four loci on pCAR3, including a second copy of the car gene cluster (carAaIIBaIIBbIICIIAcII) and the ferredoxin/reductase genes fdxI-fdrI and fdrII. Biotransformation experiments showed that FdrI (or FdrII) could drive the electron transfer chain from NAD(P)H to CarAaI (or CarAaII) with the aid of ferredoxin (CarAcI, CarAcII, or FdxI). Because this electron transfer chain showed phylogenetic relatedness to that consisting of putidaredoxin and putidaredoxin reductase of the P450cam monooxygenase system of Pseudomonas putida, CARDO systems of KA1 can be classified in the class IIA Rieske non-heme iron oxygenase system. Reverse transcription-PCR (RT-PCR) and quantitative RT-PCR analyses revealed that two car gene clusters constituted operons, and their expression was induced when KA1 was exposed to carbazole, although the fdxI-fdrI and fdrII genes were expressed constitutively. Both terminal oxygenases of KA1 showed roughly the same substrate specificity as that from the well-characterized carbazole degrader Pseudomonas resinovorans CA10, although slight differences were observed.

Improving the catalytic efficiency of a meta-cleavage product hydrolase (CumD) from Pseudomonas fluorescens IP01

The meta-cleavage product hydrolase from Pseudomonas fluorescens IP01 (CumD) hydrolyzes 2-hydroxy-6-oxo-7-methylocta-2,4-dienoate (6-isopropyl HODA) in the cumene (isopropylbenzene) degradation pathway. To modulate the substrate specificity and catalytic efficiency of CumD toward substrates derived from monocyclic aromatic compounds, we constructed the CumD mutants, A129V, I199V, and V227I, as well as four types of double and triple mutants. Toward substrates with smaller side chains (e.g. 2-hydroxy-6-oxohepta-2,4-dienoate; 6-ethyl-HODA), the k(cat)/K(m) values of the single mutants were 4.2-11 fold higher than that of the wild type enzyme and 1.8-4.7 fold higher than that of the meta-cleavage product hydrolase from Pseudomonas putida F1 (TodF). The A129V mutant showed the highest k(cat)/K(m) value for 2-hydroxy-6-oxohepta-2,4-dienoate (6-ethyl-HODA). The crystal structure of the A129V mutant was determined at 1.65 A resolution, enabling location of the Ogamma atom of the Ser103 side chain. A chloride ion was bound to the oxyanion hole of the active site, and mutant enzymes at the residues forming this site were also examined. The k(cat) values of Ser34 mutants were decreased 2.9-65 fold, suggesting that the side chain of Ser34 supports catalysis by stabilizing the anionic oxygen of the proposed intermediate state (gem-diolate). This is the first crystal structure determination of CumD in an active form, with the Ser103 residue, one of the catalytically essential "triad", being intact.

Crystal structure of the ferredoxin component of carbazole 1,9a-dioxygenase of Pseudomonas resinovorans strain CA10, a novel Rieske non-heme iron oxygenase system

The carbazole 1,9a-dioxygenase (CARDO) system of Pseudomonas resinovorans strain CA10 catalyzes the dioxygenation of carbazole; the 9aC carbon bonds to a nitrogen atom and its adjacent 1C carbon as the initial reaction in the mineralization pathway. The CARDO system is composed of ferredoxin reductase (CarAd), ferredoxin (CarAc), and terminal oxygenase (CarAa). CarAc acts as a mediator in the electron transfer from CarAd to CarAa. To understand the structural basis of the protein-protein interactions during electron transport in the CARDO system, the crystal structure of CarAc was determined at 1.9 A resolution by molecular replacement using the structure of BphF, the biphenyl 2,3-dioxygenase ferredoxin from Burkholderia cepacia strain LB400 as a search model. CarAc is composed of three beta-sheets, and the structure can be divided into two domains, a cluster-binding domain and a basal domain. The Rieske [2Fe-2S] cluster is located at the tip of the cluster-binding domain, where it is exposed to solvent. While the overall folding of CarAc and BphF is strongly conserved, the properties of their surfaces are very different from each other. The structure of the cluster-binding domain of CarAc is more compact and protruding than that of BphF, and the distribution of electric charge on its molecular surface is very different. Such differences are thought to explain why these ferredoxins can act as electron mediators in respective electron transport chains composed of different-featured components.

Laparoscopically assisted total gastrectomy with jejunal pouch interposition

BACKGROUND

Jejunal pouch interposition (JPI) is known as a useful gastric replacement procedure after total gastrectomy. The JPI procedure, however, has not been applicable to laparoscopically assisted total gastrectomy (LATG) because of its technical complexity and difficulty. This study aimed to describe our modified LATG/JPI technique, and to evaluate its feasibility, safety, and early postoperative functional outcome.

METHODS

Between September 2002 and August 2003, LATG/JPI was attempted for five patients (3 men and 2 women) with early gastric cancers in the upper portion of the stomach. The mean age of the patients was 57 years, and their BMI was 21 kg/m2. Using a 5-port technique, the gastric arteries were laparoscopically clipped and divided with adequate lymphatic dissection. After completion of gastric resection, the anvil of a circular stapling device was placed in the esophageal stump. An 8-cm minilaparotomy then was performed, and the 12-cm pouch was created extracorporeally in the "reverse U" fashion. The stapled pouch-esophagostomy was performed under laparoscopic monitoring. The remainder of the procedure was accomplished under direct vision.

RESULTS

All cases were managed laparoscopically without any complications. The mean operating time was 407 min, and the blood loss was 279 ml. All the patients showed rapid and uneventful recovery. Postoperative studies, including dual scintigraphy, showed that all jejunal pouches were satisfactorily functioning.

CONCLUSIONS

This study showed LATG/JPI to be feasible and safe. With technical modifications, LATG/JPI can become a potentially effective option for improving patients' quality of life after total gastrectomy.

Characterization of the replication, maintenance, and transfer features of the IncP-7 plasmid pCAR1, which carries genes involved in carbazole and dioxin degradation

Isolated from Pseudomonas resinovorans CA10, pCAR1 is a 199-kb plasmid that carries genes involved in the degradation of carbazole and dioxin. The nucleotide sequence of pCAR1 has been determined previously. In this study, we characterized pCAR1 in terms of its replication, maintenance, and conjugation. By constructing miniplasmids of pCAR1 and testing their establishment in Pseudomonas putida DS1, we show that pCAR1 replication is due to the repA gene and its upstream DNA region. The repA gene and putative oriV region could be separated in P. putida DS1, and the oriV region was determined to be located within the 345-bp region between the repA and parW genes. Incompatibility testing using the minireplicon of pCAR1 and IncP plasmids indicated that pCAR1 belongs to the IncP-7 group. Monitoring of the maintenance properties of serial miniplasmids in nonselective medium, and mutation and complementation analyses of the parWABC genes, showed that the stability of pCAR1 is attributable to the products of the parWAB genes. In mating assays, the transfer of pCAR1 from CA10 was detected in a CA10 derivative that was cured of pCAR1 (CA10dm4) and in P. putida KT2440 at frequencies of 3 x 10(-1) and 3 x 10(-3) per donor strain, respectively. This is the first report of the characterization of this completely sequenced IncP-7 plasmid.

Cobalt-base high-temperature alloys

We have identified cobalt-base superalloys showing a high-temperature strength greater than those of conventional nickel-base superalloys. The cobalt-base alloys are strengthened by a ternary compound with the L1(2) structure, gamma' Co3(Al,W), which precipitates in the disordered gamma face-centered cubic cobalt matrix with high coherency and with high melting points. We also identified a ternary compound, gamma' Ir3(Al,W), with the L1(2) structure, which suggests that the Co-Ir-Al-W-base systems with gamma+gamma' (Co,Ir)3(Al,W) structures offer great promise as candidates for next-generation high-temperature materials.

Recipient range of IncP-7 conjugative plasmid pCAR2 from Pseudomonas putida HS01 is broader than from other Pseudomonas strains

The carbazole-degradative plasmid pCAR2 was isolated from Pseudomonas putida and had a genetic structure similar to that of pCAR1, the IncP-7 archetype plasmid. Mating analyses of pCAR2 with various recipient strains showed that it could transfer from HS01 to Pseudomonas recipients: P. chlororaphis, P. fluorescens, P. putida, P. resinovorans and P. stutzeri. The range of recipients changed when different hosts were used as a donor of pCAR2. The range of the plasmid from strain HS01 was broader than that using P. resinovorans CA10dm4 or P. putida KT2440. When pCAR1 or pCAR2 was transferred from the same cell background, the range and frequency of conjugation were now similar. Quantitative RT-PCR analyses indicated that tra/trh genes on both plasmids were similarly transcribed in each donor strain suggesting that the conjugative machinery of both plasmids may function similarly, and that other host factors are affecting the recipient range and frequency of conjugation.

Efficient propagation of polarization from laser photons to positrons through compton scattering and electron-positron pair creation

We have demonstrated for the first time the production of highly polarized short-pulse positrons with a finite energy spread in accordance with a new scheme that consists of two-quantum processes, such as inverse Compton scattering and electron-positron pair creation. Using a circularly polarized laser beam of 532 nm scattered off a high-quality, 1.28 GeV electron beam, we have obtained polarized positrons with an intensity of 2 x 10(4) e+ /bunch. The magnitude of positron polarization has been determined to be 73 +/- 15(stat) +/- 19(syst)% by means of a newly designed positron polarimeter.

Differentiation of carbazole catabolic operons by replacement of the regulated promoter via transposition of an insertion sequence

The carbazole catabolic car operons from Pseudomonas resinovorans CA10 and Janthinobacterium sp. J3 have nearly identical nucleotide sequences in their structural and intergenic regions but not in their flanking regions. Transposition of ISPre1 from the anthranilate catabolic ant operon located an inducible promoter Pant upstream of the carCA10 operon, which is regulated by the AraC/XylS family activator AntR in response to anthranilate. The transposed Pant drives transcription of the carCA10 operon, which is composed of the car-AaAaBaBbCAcAdDFECA10 structural genes. Transcriptional fusion truncating Pant upstream of carAaCA10 resulted in constitutive luciferase expression. Primer extension analysis identified a transcription start point of the constitutive mRNA of the carCA10 operon at 385 nucleotides upstream of the carAaCA10 translation start point, and the PcarAa promoter was found. On the other hand, a GntR family regulatory gene carRJ3 is divergently located upstream of the carJ3 operon. The Pu13 promoter, required for inducible transcription of the carJ3 operon in the presence of carbazole, was identified in the region upstream of carAaJ3, which had been replaced with the Pant promoter in the carCA10 operon. Deletion of carRJ3 from a transcriptional fusion resulted in high level constitutive expression from Pu13. Purified CarRJ3 protein bound at two operator sequences OI and OII, showing that CarRJ3 directly represses Pu13 in the absence of its inducer, which was identified as 2-hydroxy-6-oxo-6-(2'-aminophenyl)hexa-2,4-dienoate, an intermediate of the carbazole degradation pathway.

The fluorene catabolic linear plasmid in Terrabacter sp. strain DBF63 carries the beta-ketoadipate pathway genes, pcaRHGBDCFIJ, also found in proteobacteria

Terrabacter sp. strain DBF63 is capable of degrading fluorene (FN) to tricarboxylic acid cycle intermediates via phthalate and protocatechuate. Genes were identified for the protocatechuate branch of the beta-ketoadipate pathway (pcaR, pcaHGBDCFIJ) by sequence analysis of a 70 kb DNA region of the FN-catabolic linear plasmid pDBF1. RT-PCR analysis of RNA from DBF63 cells grown with FN, dibenzofuran, and protocatechuate indicated that the pcaHGBDCFIJ operon was expressed during both FN and protocatechuate degradation in strain DBF63. The gene encoding beta-ketoadipate enol-lactone hydrolase (pcaD) was not fused to the next gene, which encodes gamma-carboxymuconolactone decarboxylase (pcaC), in strain DBF63, even though the presence of the pcaL gene (the fusion of pcaD and pcaC) within a pca gene cluster has been thought to be a Gram-positive trait. Quantitative RT-PCR analysis revealed that pcaD mRNA levels increased sharply in response to protocatechuate, and a biotransformation experiment with cis,cis-muconate using Escherichia coli carrying both catBC and pcaD indicated that PcaD exhibited beta-ketoadipate enol-lactone hydrolase activity. The location of the pca gene cluster on the linear plasmid, and the insertion sequences around the pca gene cluster suggest that the ecologically important beta-ketoadipate pathway genes, usually located chromosomally, may be spread widely among bacterial species via horizontal transfer or transposition events.

Secretion of bacterial xenobiotic-degrading enzymes from transgenic plants by an apoplastic expressional system: an applicability for phytoremediation

In search of an effective method for phytoremediation of wastewater contaminated with organic compounds, we investigated the application of an apoplastic expressional system that secretes useful bacterial enzymes from transgenic plants into hydroponic media through the addition of a targeting signal. We constructed transgenic Arabidopsis expressing the aromatic-cleaving extradiol dioxygenase (DbfB), which degrades 2,3-dihydroxybiphenyl (2,3-DHB), and transgenic tobacco expressing haloalkane dehalogenase (DhaA), which catalyzes hydrolytic dechlorination of 1-chlorobutane (1-CB). Although crude leaf extracts of transgenic plants expressing cytoplasm-targeted degradative enzymes showed higher activity than did those from transgenic plants expressing apoplast-targeted enzymes, the hydroponic media of the latter showed 23.2 times (DbfB) and 76.4 times (DhaA) higher activity than plants containing the cytoplasm-targeted enzymes. Addition of crystalline 2,3-DHB to 100 mL of the hydroponic medium of transgenic or wild-type seedlings revealed that only medium from the transgenic Arabidopsis expressing apoplast-targeted DbfB showed rapid ring cleavage of 2,3-DHB. Transgenic tobacco expressing apoplast-targeted DhaA also resulted in the accumulation of the dehalogenation product 1-butanol in the hydroponic medium and showed a higher tolerance to 1-CB than wild-type or transgenic plants expressing cytoplasm-targeted DhaA. These results demonstrate the usefulness of the apoplastic expression of bacterial recombinant proteins in phytoremediation.

Structure of the Terminal Oxygenase Component of Angular Dioxygenase, Carbazole 1,9a-Dioxygenase

Carbazole 1,9a-dioxygenase (CARDO) catalyzes the dihydroxylation of carbazole by angular position (C9a) carbon bonding to the imino nitrogen and its adjacent C1 carbon. This reaction is an initial degradation reaction of the carbazole degradation pathway by various bacterial strains. Only a limited number of Rieske non-heme iron oxygenase systems (ROSs) can catalyze this novel reaction, termed angular dioxygenation. Angular dioxygenation is also involved in the degradation pathways of carbazole-related compounds, dioxin, and CARDO can catalyze the angular dioxygenation for dioxin. CARDO consists of a terminal oxygenase component (CARDO-O), and the electron transport components, ferredoxin (CARDO-F) and ferredoxin reductase (CARDO-R). CARDO-O has a homotrimeric structure, and governs the substrate specificity of CARDO. Here, we have determined the crystal structure of CARDO-O of Janthinobacterium sp. strain J3 at a resolution of 1.95A. The alpha3 trimeric overall structure of the CARDO-O molecule roughly corresponds to the alpha3 partial structures of other terminal oxygenase components of ROSs that have the alpha3beta3 configuration. The CARDO-O structure is a first example of the terminal oxygenase components of ROSs that have the alpha3 configuration, and revealed the presence of the specific loops that interact with a neighboring subunit, which is proposed to be indispensable for stable alpha3 interactions without structural beta subunits. The shape of the substrate-binding pocket of CARDO-O is markedly different from those of other oxygenase components involved in naphthalene and biphenyl degradation pathways. Docking simulations suggested that carbazole binds to the substrate-binding pocket in a manner suitable for catalysis of angular dioxygenation.

The sigma54-dependent transcriptional activator SfnR regulates the expression of the Pseudomonas putida sfnFG operon responsible for dimethyl sulphone utilization

Pseudomonas putida DS1 is able to utilize dimethyl sulphide through dimethyl sulphoxide, dimethyl sulphone (DMSO2), methanesulphonate (MSA) and sulphite as a sulphur source. We previously demonstrated that sfnR encoding a sigma54-dependent transcriptional regulator is essential for DMSO2 utilization by P. putida DS1. To identify the target genes of SfnR, we carried out transposon mutagenesis on an sfnR disruptant (DMSO2-utilization-defective phenotype) using mini-Tn5, which contains two outward-facing constitutively active promoters; as a result, we obtained a mutant that restored the ability to utilize DMSO2. The DMSO2-positive mutant carried a mini-Tn5 insertion in the intergenic region between two opposite-facing operons, sfnAB and sfnFG. Both sfnA and sfnB products were similar to acyl-CoA dehydrogenase family proteins, whereas sfnF and sfnG encoded a putative NADH-dependent FMN reductase (SfnF) and an FMNH2-dependent monooxygenase (SfnG). Disruption and complementation of the sfn genes indicated that the sfnG product is essential for DMSO2 utilization by P. putida DS1. Furthermore, an enzyme assay demonstrated that SfnG is an FMNH2-dependent DMSO2 monooxygenase that converts DMSO2 to MSA. It was revealed that the expression of the sfnFG operon is directly activated by the binding of SfnR at its upstream region. Site-directed mutagenesis of the SfnR binding sequences allowed us to define a potential recognition sequence for SfnR. These results provided insight into regulation of sulphate starvation-induced genes in bacteria.

Diversity of carbazole-degrading bacteria having the car gene cluster: isolation of a novel gram-positive carbazole-degrading bacterium

Twenty-seven carbazole-utilizing bacterial strains were isolated from environmental samples, and were classified into 14 groups by amplified ribosomal DNA restriction analysis. Southern hybridization analyses showed that 3 and 17 isolates possessed the car gene homologs of Pseudomonas resinovorans CA10 and Sphingomonas sp. strain KA1, respectively. Of the 17 isolates, 2 isolates also have the homolog of the carAa gene of Sphingomonas sp. strain CB3. While the genome of one isolate, a Gram-positive Nocardioides sp. strain IC177, showed no hybridization to any car gene probes, PCR and sequence analyses indicated that strain IC177 had tandemly linked carAa and carC gene homologs whose deduced amino acid sequences showed 51% and 36% identities with those of strain KA1.

Crystallization and preliminary X-ray diffraction analysis of the electron-transfer complex between the terminal oxygenase component and ferredoxin in the Rieske non-haem iron oxygenase system carbazole 1,9a-dioxygenase

Carbazole 1,9a-dioxygenase, which consists of an oxygenase component (CARDO-O) and the electron-transport components ferredoxin (CARDO-F) and ferredoxin reductase (CARDO-R), catalyzes dihydroxylation at the C1 and C9a positions of carbazole. The electron-transport complex between CARDO-O and CARDO-F crystallizes at 293 K using hanging-drop vapour diffusion with the precipitant PEG MME 2000 (type I crystals) or PEG 3350 (type II). Blossom-shaped crystals form from a pile of triangular plate-shaped crystals. The type I crystal diffracts to a maximum resolution of 1.90 A and belongs to space group P2(1), with unit-cell parameters a = 97.1, b = 89.8, c = 104.9 A, alpha = gamma = 90, beta = 103.8 degrees. Diffraction data for the type I crystal gave an overall Rmerge of 8.0% and a completeness of 100%. Its VM value is 2.63 A3 Da(-1), indicating a solvent content of 53.2%.

Crystal structure of the terminal oxygenase component of cumene dioxygenase from Pseudomonas fluorescens IP01

The crystal structure of the terminal component of the cumene dioxygenase multicomponent enzyme system of Pseudomonas fluorescens IP01 (CumDO) was determined at a resolution of 2.2 A by means of molecular replacement by using the crystal structure of the terminal oxygenase component of naphthalene dioxygenase from Pseudomonas sp. strain NCIB 9816-4 (NphDO). The ligation of the two catalytic centers of CumDO (i.e., the nonheme iron and Rieske [2Fe-2S] centers) and the bridging between them in neighboring catalytic subunits by hydrogen bonds through a single amino acid residue, Asp231, are similar to those of NphDO. An unidentified external ligand, possibly dioxygen, was bound at the active site nonheme iron. The entrance to the active site of CumDO is different from the entrance to the active site of NphDO, as the two loops forming the lid exhibit great deviation. On the basis of the complex structure of NphDO, a biphenyl substrate was modeled in the substrate-binding pocket of CumDO. The residues surrounding the modeled biphenyl molecule include residues that have already been shown to be important for its substrate specificity by a number of engineering studies of biphenyl dioxygenases.

Divergent structures of carbazole degradative car operons isolated from gram-negative bacteria

Southern hybridization analysis of the genomes from the newly-isolated 10 carbazole (CAR)-utilizing bacteria revealed that 8 of the isolates carried gene clusters homologous to the CAR-catabolic car operon of Pseudomonas resinovorans strain CA10. Sequencing analysis showed that two car operons and the neighboring regions of Pseudomonas sp. strain K23 are nearly identical to that of strain CA10. In contrast to strains CA10 and K23, carEF genes did not exist downstream of the car gene cluster of Janthinobacterium sp. strain J3. In the car gene clusters, strains CA10, K23 and J3 have Rieske-type ferredoxin as a component of carbazole dioxygenase, although Sphingomonas sp. strain KA1 possesses a putidaredoxin-type ferredoxin. We confirmed that this putidaredoxin-type ferredoxin CarAc can function as an electron mediator to CarAa of strain KA1. In the upstream regions of the carJ3 and carKA1 gene clusters, ORFs whose deduced amino acid sequences showed homology to GntR-family transcriptional regulators were identified.

A simple technique for circular-stapled Billroth I reconstruction in laparoscopic gastrectomy

A simple surgical technique that facilitates circular-stapled Billroth I gastroduodenostomy in laparoscopic distal gastrectomy is described. After standard laparoscopic mobilization of the distal stomach, a small duodenotomy is made just distal to the pyloric ring. The anvil of a circular-stapling device, secured with a Vicryl suture, is introduced via the duodenotomy. The Vicryl suture is advanced anteriorly so that a center rod penetrates the anterior duodenal wall. The duodenum is staple-transected at this point, and the center rod is wrapped with the stapled duodenal stump by approximation of both edges using a suturing device. The circular-stapled gastroduodenostomy then is completed in a standard fashion. The authors have used this technique for three patients, and their early outcomes are promising.

Characterization of [3Fe-4S] ferredoxin DbfA3, which functions in the angular dioxygenase system of Terrabacter sp. strain DBF63

Dibenzofuran 4,4a-dioxygenase (DFDO) from Terrabacter sp. strain DBF63 is comprised of three components, i.e., terminal oxygenase (DbfA1, DbfA2), putative [3Fe-4S] ferredoxin (ORF16b product), and unidentified ferredoxin reductase. We produced DbfA1 and DbfA2 using recombinant Escherichia coli BL21(DE3) cells as a native form and purified the complex to apparent homogeneity. We also produced and purified a putative [3Fe-4S] ferredoxin encoded by ORF16b, which is located 2.5 kb downstream of the dbfA1A2 genes, with E. coli as a histidine (His)-tagged form. The reconstructed DFDO system with three purified components, i.e., DbfA1A2, His-tagged ORF16b product, and His-tagged PhtA4 (which is a tentative reductase derived from the phthalate dioxygenase system of strain DBF63) could convert fluorene to 9-fluorenol (specific activity: 14.4 nmol min(-1) mg(-1)) and convert dibenzofuran to 2,2',3-trihydroxybiphenyl. This indicates that the ORF16b product can transport electrons to the DbfA1A2 complex; and therefore it was designated DbfA3. Based on spectroscopic UV-visible absorption characteristics and electron paramagnetic resonance spectra, DbfA3 was elucidated to contain a [3Fe-4S] cluster. Ferredoxin interchangeability analysis using several types of ferredoxins suggested that the redox partner of the DbfA1A2 complex may be rather specific to DbfA3.

Isolation and characterization of genes encoding polycyclic aromatic hydrocarbon dioxygenase from acenaphthene and acenaphthylene degrading Sphingomonas sp. strain A4

Sphingomonas sp. strain A4 is capable of utilizing acenaphthene and acenaphthylene as sole carbon and energy sources, but it is unable to grow on other polycyclic aromatic hydrocarbons (PAHs). The genes encoding terminal oxygenase components of ring-hydroxylating dioxygenase (arhA1 and arhA2) were isolated from this strain by means of the ability to oxidize indole to indigo of the Escherichia coli clone containing electron transport proteins from phenanthrene-degrading Sphingobium sp. strain P2. The translated products of arhA1 and arhA2 exhibited moderate sequence identity (less than 56%) to large and small subunits of dioxygenase of other ring-hydroxylating dioxygenases. Biotransformation with recombinant E. coli clone revealed the broad substrate specificity of this oxygenase toward several PAHs including acenaphthene, acenaphthylene, naphthalene, phenanthrene, anthracene and fluoranthene. Southern hybridization analysis revealed the presence of a putative arhA1 homologue on a locus different from that of the arhA1 gene. Insertion inactivation of the arhA1 gene in strain A4 suggested that the gene but not the putative homologue one was involved in the degradation of acenaphthene and acenaphthylene in this strain.