Synovial fluid profile dictates nanoparticle uptake into cartilage - implications of the protein corona for novel arthritis treatments

OBJECTIVE

Drug delivery strategies for joint diseases need to overcome the negatively charged cartilage matrix. Previous studies have extensively investigated particle approaches to increase uptake efficiency by harnessing the anionic charge of the cartilage but have neglected to address potential interactions with the protein-rich biological environment of the joint space. We aimed to evaluate the effects of hard protein coronas derived from osteoarthritis (OA) and rheumatoid arthritis (RA) patient synovial fluids as well as the commonly used fetal calf serum (FCS) on nanoparticle (NP) uptake into tissues and cells.

METHODS

We developed a NP panel with varying PEGylation and incubated them with synovial fluid from either OA, RA patients or FCS. We evaluated the effects of the formed NP-biocorona complex uptake into the porcine articular cartilage explants, chondrocytes and monocyte cell lines and primary patient FLS cells. Proteins composing hard biocoronas were identified using a quantitative proteomics approach.

RESULTS

Formed biocoronas majorly impacted NP uptake into cartilage tissue and dictated their uptake in chondrocytes and monocytes. The most suitable NP for potential OA applications was identified. A variety of proteins that were found on all NPs, irrespective of surface modifications. NP-, and protein-specific differences were also observed between the groups, and candidate proteins were identified that could account for the observed differences.

CONCLUSIONS

This study demonstrates the impact of protein coronas from OA and RA patient synovial fluids on NP uptake into cartilage, emphasizing the importance of biological microenvironment considerations for successful translation of drug delivery vehicles into clinics.

Stem cell membrane-coated abiotic nanomaterials for biomedical applications

Nanoscale materials have been extensively employed for diagnostic and therapeutic purposes. However, the developed nanosystems still suffer from some limitations, namely the rapid elimination by the immune system, lack of targeting to specific cells, and insufficient biocompatibility. Therefore, novel strategies based upon a biomimetic approach have received attention to improving the pharmacokinetics and safety profile of nanosystems. One promising strategy is the application of a biomimetic coating consisting of cell membranes derived from different cell types onto nanoparticle cores. Stem cells have been investigated to develop targeted nanodevices owing to their excellent intrinsic tissue-specific homing features, protecting them from the immune system to reach the sites of inflammation. This targeting ability is conferred by a surface repertoire of stem cell-associated biomolecules. Such nanoscopical materials offer sustained circulation and boosted drug accumulation at target sites, augmenting therapeutic efficacy and safety. Additionally, the coating of nanoparticles with cell membranes acts as a camouflage mechanism to increase their circulation time. The current review explores the particular features of stem cell membrane coating as multifunctional biomimetic surface functionalization agents to camouflage nanoparticle cores. Biomedical applications of engineered stem cell membrane-coated nanoparticles, challenges in clinical translation, and their future prospects are addressed.

Influence of protein corona on the interaction of glycogen-siRNA constructs with ex vivo human blood immune cells

Glycogen-nucleic acid constructs i.e., glycoplexes are emerging promising platforms for the alteration of gene expression and transcription. Understanding the interaction of glycoplexes with human blood components, such as serum proteins and peripheral blood mononuclear cells (PBMCs), is important to overcome immune cell activation and control biodistribution upon administration of the glycoplexes in vivo. Herein, we investigated the interactions of polyethylene glycol (PEG)ylated and non-PEGylated glycoplexes carrying siRNA molecules with PBMCs isolated from the blood of healthy donors. We found that both types of glycoplexes were non-toxic and were primarily phagocytosed by monocytes without triggering a pro-inflammatory interleukin 6 cytokine production. Furthermore, we investigated the role of the protein corona on controlling the internalization efficiency in immune cells - we found that the adsorption of serum proteins, in particular haptoglobin, alpha-1-antitrypsin and apolipoprotein A-II, onto the non-PEGylated glycoplexes, significantly reduced the uptake of the glycoplexes by PBMCs. Moreover, the non-PEGylated glycoplexes were efficient in the nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB) knockdown in monocytic THP-1 cell line. This study provides an insight into the rational design of glycogen-based nanocarriers for the safe delivery of siRNA without eliciting unwanted immune cell activation and efficient siRNA activity upon its delivery.

Concentration and composition of the protein corona as a function of incubation time and serum concentration: an automated approach to the protein corona

Nanoparticles in contact with proteins form a "corona" of proteins adsorbed on the nanoparticle surface. Subsequent biological responses are then mediated by the adsorbed proteins rather than the bare nanoparticles. The use of nanoparticles as nanomedicines and biosensors would be greatly improved if researchers were able to predict which specific proteins will adsorb on a nanoparticle surface. We use a recently developed automated workflow with a liquid handling robot and low-cost proteomics to determine the concentration and composition of the protein corona formed on carboxylate-modified iron oxide nanoparticles (200 nm) as a function of incubation time and serum concentration. We measure the concentration of the resulting protein corona with a colorimetric assay and the composition of the corona with proteomics, reporting both abundance and enrichment relative to the fetal bovine serum (FBS) proteins used to form the corona. Incubation time was found to be an important parameter for corona concentration and composition at high (100% FBS) incubation concentrations, with only a slight effect at low (10%) FBS concentrations. In addition to these findings, we describe two methodological advances to help reduce the cost associated with protein corona experiments. We have automated the digest step necessary for proteomics and measured the variability between triplicate samples at each stage of the proteomics experiments. Overall, these results demonstrate the importance of understanding the multiple parameters that influence corona formation, provide new tools for corona characterization, and advance bioanalytical research in nanomaterials.

Nano-size dependent protein corona formation by SARS-CoV-2 Omicron spike protein over gold nano-colloid and reversible aggregation

The adsorption process of SARS-CoV-2 Omicron spike protein to the nano-gold colloid surfaces was examined by monitoring the surface plasmon resonance (SPR) band shift of gold-nano particles ranging between diameters of d = 10–100 nm. The externally changed pH between 3 and 11 at 24.5 ± 0.4 °C initiated a reversible formation of the gold colloid aggregates, where formation/deformation of the aggregates were monitored by red/blue shift of the peak of the SPR band. There was no sign of reversible aggregation for d = 10, 15, and 20 nm gold colloids. A clear undulation of the peak shift corresponding to pH hopping between pH ~3 and ~11 was confirmed for colloidal d > 30 nm. This degree of the reversibility was compared to previously reported SARS-CoV-2 Alpha spike protein coated gold colloids. It was concluded that Omicron spike protein possesses a similar low affinity for gold nano particle d < 20 nm and possesses the higher affinity to the gold nanoparticles of d > 30 nm. However, the Omicron spike protein conformation was presumed to be more denatured compared to the SARS-CoV-2 Alpha spike protein. Our finding suggested Omicron spike protein was more acid labile/flexible.

Protein coronas coating polymer-stabilized silver nanocolloids attenuate cytotoxicity with minor effects on antimicrobial performance

Silver nanoparticles are versatile platforms with a variety of applications in the biomedical field. In this framework, their presence in biological media inevitably leads to the interaction with proteins thus conducting to the formation of biomolecular coronas. This feature alters the identity of the nanomaterial and may affect many biological events. These considerations motivated the investigation of protein adsorption onto the surface of polymer-stabilized AgNPs. The metallic colloids were coated by polyethyleneimine (PEI), polyvinylpyrrolidone (PVP), and poly(2-vinyl pyridine)-b-poly(ethylene oxide) (PEO-b-P2VP), and nanoparticle-protein interaction was probed by using a library of analytical techniques. The experimental data revealed a higher extent of protein adsorption at the surface of AgNPs@PVP whereas PEO-b-P2VP coating conducted to the least amount. The main component of the protein coronas was evidenced to be bovine serum albumin (BSA), which is indeed the protein at the highest abundancy in the model biological media. We have further demonstrated reduced cytotoxicity of the silver colloids coated by biomolecular coronas as compared to the pristine counterparts. Nevertheless, the protein coatings did not notably reduce the antimicrobial performance of the polymer-stabilized AgNPs. Accordingly, although the protein-repelling property is frequently targeted towards longer in vivo circulation of nanoparticles, we herein underline that protein coatings, which are commonly treated as artifacts to be avoided, may indeed enhance the biological performance of nanomaterials. These findings are expected to be highly relevant in the design of polymer-stabilized metallic colloids intended to be used in healthcare.

Aggregation kinetics of biochar nanoparticles in aqueous environment: Interplays of anion type and bovine serum albumin

The colloidal particles, especially those at the nanoscale, are the most active part of the pyrogenic carbon (biochar). Increasingly applied biochar has resulted in a large number of biochar nanoparticles (NPs) being released into the environment. The aggregation of biochar NPs affects their environmental behavior and fate. The complex effects of anion type (Cl^-, SO₄^2-) and protein (bovine serum albumin, BSA) on the aggregation of wheat straw biochar (WB) and pinewood biochar (PB) NPs in solutions were investigated by the time-resolved dynamic light scattering method. The critical coagulation concentration (CCC) of WB and PB NPs in Na₂SO₄ solution was higher than their CCCs in NaCl solution, which was consistent with the Hofmeister series that SO₄^2-, a kosmotrope anion, increased the interaction between water molecules, thus enhancing the hydrophobic interactions between biochar NPs in solution and promoting their aggregation, while Cl^-, a chaotropic agent, exhibited the opposite effect. When BSA was added into the solution, BSA was adsorbed on the surface of biochar NPs and BSA corona was formed, which inhibited the aggregation of biochar NPs by inducing steric force. The enhanced stability of biochar NPs by BSA was more significant in NaCl than in Na₂SO₄ solution because BSA corona had a more negatively charged surface and a more steric structure in NaCl solution, thus generating stronger electrical repulsion and steric hindrance. The classical DLVO theory and the XDLVO theory incorporating the steric repulsion (in the presence of BSA) were used to interpret the aggregation and dispersion of biochar NPs. Through this study, we found that anion type indirectly affected the aggregation of biochar NPs by influencing the interaction between water molecules, while the aggregation of BSA-biochar NPs conjugates is mainly influenced by the surface charge and structure of BSA corona.

Nanotechnology based drug delivery systems: Does shape really matter?

As of today, the era of nanomedicine has brought numerous breakthroughs and overcome challenges in the treatment of various disorders. Various factors like size, charge and surface hydrophilicity have garnered significant attention by nanotechnologists. However, more exploration in the field of nanoparticle shape and geometry, one of the basic physical phenomenon is required. Tuning nanoparticle shape and geometry could potentially overcome pitfalls in therapeutics and biomedical fields. Thus, in this article, we unveil the importance of tuning nanoparticle shape selection across the delivery platforms. This article provides an in-depth understanding of nanoparticle shape modulation and advise the researchers on the ideal morphology selection tailored for each implication. We deliberated the importance of nanoparticle shape selection for specific implications with respect to organ targeting, cellular internalization, pharmacokinetics and bio-distribution, protein corona formation as well as RES evasion and tumor targeting. An additional section on the significance of shape transformation, a recently introduced novel avenue with applications in drug delivery was discussed. Furthermore, regulatory concerns towards nanoparticle shape which need to be addressed for harnessing their clinical translation will be explained.

Two different protein corona formation modes on Soluplus® nanomicelles

Soluplus® nanomicelles have been widely reported in biomedical field for their excellent drug loading capacity and solubility enhancement ability. However, when administrated in vivo, the protein corona will be formed on Soluplus® nanomicelles, significantly affecting their drug delivery performance. Up to now, few studies examined the protein corona formation process and its impact factors of Soluplus® nanomicelles. The multiple proteins in biofluids may form protein corona in different modes due to their diversified properties. In this study, Bovine serum albumin (BSA), Lysozyme (Lyso) and Bovine hemoglobin (BHb) were chosen as model proteins to investigate the protein corona formation process of Soluplus® nanomicelles. By analyzing the polarity of the protein amino acid residues distributing microenvironments, the results showed that there were two different protein corona formation modes, i.e., surface adsorption and insertion, which were determined by the hydrophilicity of proteins. The hydrophobic BHb followed the insertion mode while hydrophilic BSA and Lyso followed the surface adsorption mode. Ultimately, upon protein corona formation, the size and surface chemistry of nanomicelles was significantly affected. We believe this study will provide a new research paradigm to the design and application of Soluplus® nanomicelles.

Time evolution of protein corona formed by polystyrene nanoplastics and urease

Nanoplastics, as an emerging pollutant in the environment, have the potential to adsorb various macromolecules onto the surface to form protein corona that may change the physicochemical properties and environmental fate of themselves, which deepens the uncertainty of their environmental hazards. Hence, in present study, we investigated the interaction between polystyrene nanoplastics and urease that forms protein corona over time in different conditions with atomic force microscopy, zeta potential, hydrodynamic diameter, and infrared spectroscopy. According to our results, polystyrene nanoplastics adsorbed urease and formed hard corona, changing the secondary structure of urease, and that the physicochemical properties of protein corona changed and stabilized over time. We concluded that even in a single-protein system, a dynamic process where protein molecules simultaneously adsorb onto and desorb from the surface of nanoplastics runs through the entire interaction. And we found that the formation and evolution of protein corona were governed by various interlinked factors (e.g., pH and nanoplastic surface modification types) instead of dominated by individual factor. This study aims to improve the knowledge about the formation of nanoplastic-protein corona and thus provide a reference for better evaluation of their environmental risk.

Comprehensive and systematic characterization of multi-functionalized cisplatin nano-conjugate: from the chemistry and proteomic biocompatibility to the animal model

Background

Nowadays, nanoparticles (NPs) have evolved as multifunctional systems combining different custom anchorages which opens a wide range of applications in biomedical research. Thus, their pharmacological involvements require more comprehensive analysis and novel nanodrugs should be characterized by both chemically and biological point of view. Within the wide variety of biocompatible nanosystems, iron oxide nanoparticles (IONPs) present mostly of the required features which make them suitable for multifunctional NPs with many biopharmaceutical applications.

Results

Cisplatin-IONPs and different functionalization stages have been broadly evaluated. The potential application of these nanodrugs in onco-therapies has been assessed by studying in vitro biocompatibility (interactions with environment) by proteomics characterization the determination of protein corona in different proximal fluids (human plasma, rabbit plasma and fetal bovine serum),. Moreover, protein labeling and LC–MS/MS analysis provided more than 4000 proteins de novo synthetized as consequence of the nanodrugs presence defending cell signaling in different tumor cell types (data available via ProteomeXchanges with identified PXD026615). Further in vivo studies have provided a more integrative view of the biopharmaceutical perspectives of IONPs.

Conclusions

Pharmacological proteomic profile different behavior between species and different affinity of protein coating layers (soft and hard corona). Also, intracellular signaling exposed differences between tumor cell lines studied. First approaches in animal model reveal the potential of theses NPs as drug delivery vehicles and confirm cisplatin compounds as strengthened antitumoral agents.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01546-y.

The interactions between DNA nanostructures and cells: A critical overview from a cell biology perspective

DNA nanotechnology has yielded remarkable advances in  composite materials with diverse applications in biomedicine. The specificity and predictability of building 3D structures at the nanometer scale make DNA nanotechnology a promising tool for uses in biosensing, drug delivery, cell modulation, and bioimaging. However, for successful translation of DNA nanostructures to real-world applications, it is crucial to understand how they interact with living cells, and the consequences of such interactions. In this review, we summarize the current state of knowledge on the interactions of DNA nanostructures with cells. We identify key challenges, from a cell biology perspective, that influence progress towards the clinical translation of DNA nanostructures. We close by providing an outlook on what questions must be addressed to accelerate the clinical translation of DNA nanostructures. STATEMENT OF SIGNIFICANCE: Self-assembled DNA nanostructures (DNs) offers unique opportunities to overcome persistent challenges in the nanobiotechnology field. However, the interactions between engineered DNs and living cells are still not well defined. Critical systematization of current cellular models and biological responses triggered by DNs is a crucial foundation for the successful clinical translation of DNA nanostructures. Moreover, such an analysis will identify the pitfalls and challenges that are present in the field, and provide a basis for overcoming those challenges.

Influence of protein configuration on aggregation kinetics of nanoplastics in aquatic environment

Aggregation kinetics of nanoplastics in aquatic environment are influenced by their interactions with proteins having different structures and properties. This study employed time-resolved dynamic light scattering (TR-DLS) to investigate the effects of 5 proteins (bovine hemoglobin (BHb), bovine (BSA) and human serum albumin (HSA), collagen type I (Col I), and bovine casein (CS)) on aggregation kinetics of polystyrene nanoplastics (PSNPs) under natural water conditions, which were simulated using various ionic strength (1-1000 mM NaCl and 0.01-100 mM CaCl₂), pH (3-9), and protein concentration (1-5 mg/L of total organic carbon). The results indicated that the interactions between proteins and PSNPs strongly depended on electrostatic properties, protein structures, and solution chemistries, which induced distinct aggregation behaviors in NaCl and CaCl₂ solutions. Electrostatic repulsion and steric hindrance dominated their interactions in NaCl solution by stabilizing PSNPs with the order of spherical BSA and disordered CS > heart-shaped HSA > fibrillar Col I; whereas positively charged BHb destabilized PSNPs with aggregation rate of 1.71 nm/s at 300 mM NaCl. In contrast, at CaCl₂ concentration below 20 mM, proteins destabilized PSNPs following the sequence of HSA > BHb > Col I > BSA depending on counterbalance among double layer compression, cation bridging, and steric hindrance; whereas CS stabilized PSNPs by precipitating Ca²⁺ that inhibited charge screening effect. Both protein concentration and solution pH affected protein corona formation, surface charge, and protein structure that altered stability of PSNPs. Characterizations using fluorescence spectroscopy, circular dichroism, and two-dimensional correlation analysis spectroscopy showed fluorescence quenching and ellipticity reduction of proteins, indicating strong adsorption affinity between PSNPs and proteins. The study provides insight to how protein configuration and water chemistry affect fate and transport of nanoplastics in aquatic environment.

The effects of protein corona on in vivo fate of nanocarriers

With the emerging advances in utilizing nanocarriers for biomedical applications, a molecular-level understanding of the in vivo fate of nanocarriers is necessary. After administration into human fluids, nanocarriers can attract proteins onto their surfaces, forming an assembled adsorption layer called protein corona (PC). The formed PC can influence the physicochemical properties and subsequently determine nanocarriers' biological behaviors. Therefore, an in-depth understanding of the features and effects of the PC on the nanocarriers' surface is the first and most important step towards controlling their in vivo fate. This review introduces fundamental knowledge such as the definition, formation, composition, conformation, and characterization of the PC, emphasizing the in vivo environmental factors that control the PC formation. The effect of PC on the physicochemical properties and thus biological behaviors of nanocarriers was then presented and thoroughly discussed. Finally, we proposed the design strategies available for engineering PC onto nanocarriers to manipulate them with the desired surface properties and achieve the best biomedical outcomes.

Chiral NIR-II fluorescent Ag2S quantum dots with stereospecific biological interactions and tumor accumulation behaviors

Near-infrared II (NIR-II) fluorescent nanoprobes hold great potential for biomedical applications. Elucidating the relationship between surface properties of NIR-II nanoprobes and their biological behaviors is particularly important for future probe design and their performance optimization. Despite the rapid development of NIR-II nanoprobes, the distinct role of surface chirality on their biological fates has rarely been exploited. Herein, chiral NIR-II fluorescent Ag₂S quantum dots (QDs) are synthesized to investigate the relationship between their chirality and biological functions at both in vitro and in vivo levels. D-/L-Ag₂S QDs exhibit significant differences on their interactions with serum proteins, which further affect the cellular uptake. As a result, D-Ag₂S QDs can be internalized with higher efficiency (over 2-fold) than that of L-Ag₂S QDs. Moreover, in vivo studies reveal that the chirality determines the primary localization of these chiral QDs, where a more efficient renal elimination of D-Ag₂S QDs was observed than that of L-Ag₂S QDs. Importantly, D-Ag₂S QDs show preferential accumulation in tumor region than that of L-Ag₂S QDs in orthotopic kidney tumor model, which points out a new avenue of enhancing targeting capabilities of nanoprobes by engineering their surface chirality.

Nutrient molecule corona: An update for nanomaterial-food component interactions

The adsorption of biological molecules to nanomaterials (NMs) will significantly impact NMs' behavior in complex microenvironments. Previously we proposed the need to consider the interactions between food components and NMs for the evaluation of oral toxicity of NMs. This review updated this concept as nutrient molecule corona, that the adsorption of nutrient molecules alters the uptake of nutrient molecules and/or NMs, as well as the signaling pathways to induce a combined toxicity due to the biologically active nature of nutrient molecules. Even with the presence of protein corona, nutrient molecules may still bind to NMs to change the identities of NMs in vivo. Furthermore, this review proposed the binding of excessive nutrient molecules to NMs to induce a combined toxicity under pathological conditions such as metabolic diseases. The structures of nutrient molecules and physicochemical properties of NMs determine nutrient molecule corona formation, and these aspects should be considered to limit the unwanted effects brought by nutrient molecule corona. In conclusion, similar to other biological molecule corona, the formation of nutrient molecule corona due to the presence of food components or excessive nutrient molecules in pathophysiological microenvironments will alter the behaviors of NMs.

Temperature, concentration, and surface modification influence the cellular uptake and the protein corona of polystyrene nanoparticles

The composition of the protein corona varies depending on several parameters and influences the cellular fate of the nanocarriers. Here, we investigated the influence of three key parameters (surface charge, temperature, and plasma concentration) on the formation and composition of the protein corona of polystyrene nanoparticles and ultimately on the cellular uptake of pre-coated nanoparticles. At a fixed temperature and concentration, the surface charge, and surfactant influence its composition. We observed that the composition of the corona formed at low temperatures (4°C) is different from that formed at physiological temperatures (37°C). At low plasma concentrations (up to 25%), the corona consists of more diverse proteins than at higher concentrations. Finally, we concluded that regardless of the nanoparticle formulation, the degree of uptake by model cancer and endothelial cells of the nanoparticles decreased when pre-coated at increasing temperature or plasma concentration. STATEMENT OF SIGNIFICANCE: Drug delivery through nanocarriers is an increasingly important concept in research and medicine. One problem in the application of nanocarriers in medicine is the protein corona that forms around the nanocarriers when they get in contact with protein-containing fluids. So far, several factors have been identified that influence the composition of the protein corona and thus the biological identity of the particles. However, lacking comparability remains between the studies because different concentrations or temperatures of the protein solutions are used. In this study we demonstrate how the incubation temperature or the concentration of plasma influences the protein corona and thus the cellular uptake of polystyrene nanoparticles.

Artificial engineering of the protein corona at bio-nano interfaces for improved cancer-targeted nanotherapy

Nanoparticles (NPs) have been demonstrated in numerous applications as anticancer, antibacterial and antioxidant agents. Artificial engineering of protein interactions with NPs in biological systems is crucial to develop potential NPs for drug delivery and cancer nanotherapy. The protein corona (PC) on the NP surface, displays an interface between biomacromolecules and NPs, governing their pharmacokinetics and pharmacodynamics. Upon interaction of proteins with the NP surface, their surface features are modified and they can easily be removed from the circulation by the mononuclear phagocytic system (MPS). PC properties heavily depend on the biological microenvironment and NP surface physicochemical parameters. Based on this context, we have surveyed different approaches that have been used for artificial engineering of the PC composition on NP surfaces. We discuss the effects of NP size, shape, surface modifications (PEGylation, self-peptide, other polymers), and protein pre-coating on the PC properties. Additionally, other factors including protein source and structure, intravenous injection and the subsequent shear flow, plasma protein gradients, temperature and local heat transfer, and washing media are considered in the context of their effects on the PC properties and overall target cellular effects. Moreover, the effects of NP-PC complexes on cancer cells based on cellular interactions, organization of intracellular PC (IPC), targeted drug delivery (TDD) and regulation of burst drug release profile of nanoplatforms, enhanced biocompatibility, and clinical applications were discussed followed by challenges and future perspective of the field. In conclusion, this paper can provide useful information to manipulate PC properties on the NP surface, thus trying to provide a literature survey to shorten their shipping from preclinical to clinical trials and to lay the basis for a personalized PC.

Reduced cytotoxicity of nanomaterials driven by nano-bio interactions: Case study of single protein coronas enveloping polymersomes

The protein adsorption onto poly(acrylic acid)-block-polystyrene (PAA₂₂-b-PS₁₄₄) polymersomes has been investigated with regard to structural features, thermodynamic aspects and biological consequences. The light scattering measurements revealed the formation of protein coronas enveloping the polymeric capsules regardless of the chemical nature of the biomacromolecules. The experiments were conducted by using lysozyme, immunoglobulin G - IgG and bovine serum albumin - BSA as model proteins due to their differences concerning size and residual surface charge at physiological pH. The protein adsorption was further confirmed by isothermal titration calorimetry, and the experimental data suggest that the phenomenon is mainly governed by hydrogen bonding and van der Waals interactions. The pre-existing protein layer via the pre-incubation in protein environments notably attenuates the cytotoxicity of the nanomaterial compared to the pristine counterparts. This approach can possibly be extended to different types of assemblies when intermolecular interactions are able to induce protein adsorption and the development of protein coronas around nanoparticles. Such fairly simple method may be convenient to engineer safer nanomaterials towards a variety of biomedical applications when the nanotoxicity is an issue. Additionally, the strategy can possibly be used to tailor the surface properties of nanoparticles by adsorbing specific proteins for targeting purposes.

Dynamic process, mechanisms, influencing factors and study methods of protein corona formation

Nanoparticles interacting with proteins to form protein corona represent one of the most fundamental problems in the rapid development of nanotechnology. In the past decade, thousands of studies have pointed out this issue. Within multi-protein systems, the formation of protein corona is a homeostasis process in which proteins compete for the limited surface sites of nanoparticles. Besides, the formation of protein corona generally shows a tendency of evolving with time and involves many different driving forces controlled by properties of nanoparticles, proteins and environment. Therefore, recent research on the dynamic process and mechanisms of protein corona formation in both animals and plants are summarized in this review. The factors that affect the formation and the techniques that commonly used for protein corona analysis are proposed. Furthermore, in order to provide reference for the future research, the limitations and challenges in protein corona studies are assessed and the future perspectives are proposed.

Unveiling the Bio-corona Fingerprinting of Potential Anticancer Carbon Nanotubes Coupled with D-Amino Acid Oxidase

The oxidation therapy, based on the controlled production of Reactive Oxygen Species directly into the tumor site, was introduced as alternative antitumor approach. For this purpose, d-amino acid oxidase (DAAO) from the yeast Rhodotorula gracilis, an enzyme able to efficiently catalyze the production of hydrogen peroxide from d-amino acids, was adsorbed onto multi-walled carbon nanotubes (MWCNTs), previously functionalized with polylactic-co-glycolic acid (PLGA) or polyethylene glycol (PEG) at different degrees to reduce their toxicity, to be targeted directly into the tumor. In vitro activity and cytotoxicity assays demonstrated that DAAO-functionalized nanotubes (f-MWCNTs) produced H2O2 and induced toxic effects to selected tumor cell lines. After incubation in human plasma, the protein corona was investigated by SDS-PAGE and mass spectrometry analysis. The enzyme nanocarriers generally seemed to favor their biocompatibility, promoting the interaction with dysopsonins. Despite this, PLGA or high degree of PEGylation promoted the adsorption of immunoglobulins with a possible activation of immune response and this effect was probably due to PLGA hydrophobicity and dimensions and to the production of specific antibodies against PEG. In conclusion, the PEGylated MWCNTs at low degree seemed the most biocompatible nanocarrier for adsorbed DAAO, preserving its anticancer activity and forming a bio-corona able to reduce both defensive responses and blood clearance.

Structural changes in selected human proteins induced by exposure to quantum dots, their biological relevance and possible biomedical applications

Quantum dots (QDs) are semi-conductor luminescent nanocrystals usually of 2-10 nm diameter, attracting the significant attention in biomedical studies since emerged. Due to their unique optical and electronic properties, i.e. wide absorption spectra, narrow tunable emission bands or stable, bright photoluminescence, QDs seem to be ideally suited for multi-colour, simultaneous bioimaging and cellular labeling at the molecular level as new-generation probes. A highly reactive surface of QDs allows for conjugating them to biomolecules, what enables their direct binding to areas of interest inside or outside the cell for biosensing or targeted delivery. Particularly protein-QDs conjugates are current subjects of research, as features of QDs can be combined with protein specific functionalities and therefore used as a complex in variety of biomedical applications. It is known that QDs are able to interact with cells, organelles and macromolecules of the human body after administration. QDs are reported to cause changes at proteins level, including unfolding and three-dimensional structure alterations which might hamper proteins from performing their physiological functions and thereby limit the use of QD-protein conjugates in vivo. Moreover, these changes may trigger unwanted cellular outcomes as the effect of different signaling pathways activation. In this review, characteristics of QDs interactions with certain human proteins are presented and discussed. Besides that, the following manuscript provides an overview on structural changes of specific proteins exposed to QDs and their biological and biomedical relevance.

The Janus of Protein Corona on nanoparticles for tumor targeting, immunotherapy and diagnosis

The therapeutics based on nanoparticles (NPs) are considered as the promising strategy for tumor detection and treatment. However, one of the most challenges is the adsorption of biomolecules on NPs after their exposition to biological medium, leading unpredictable in vivo behaviors. The interactions caused by protein corona (PC) will influence the biological fate of NPs in either negative or positive ways, including (i) blood circulation, accumulation and penetration of NPs at targeting sites, and further cellular uptake in tumor targeting delivery; (ii) interactions between NPs and receptors on immune cells for immunotherapy. Besides, PC on NPs could be utilized as new biomarker in tumor diagnosis by identifying the minor change of protein concentration led by tumor growth and invasion in blood. Herein, the mechanisms of these PC-mediated effects will be introduced. Moreover, the recent advances about the strategies will be reviewed to reduce negative effects caused by PC and/or utilize positive effects of PC on tumor targeting, immunotherapy and diagnosis, aiming to provide a reasonable perspective to recognize PC with their applications.

A multistep in vitro hemocompatibility testing protocol recapitulating the foreign body reaction to nanocarriers

The development of drug nanocarriers based on polymeric, lipid and ceramic biomaterials has been paving the way to precision medicine, where the delivery of poorly soluble active compounds and personalized doses are made possible. However, the nano-size character of these carriers has been demonstrated to have the potential to elicit pathways of the host response different from those of the same biomaterials when engineered as larger size implants and of the drugs when administered without a carrier. Therefore, a specific regulatory framework needs to be made available that can offer robust scientific insights and provide safety data by reliable tests of these novel nano-devices. In this context, the present work presents a multistep protocol for the in vitro assessment of the hemocompatibility of nanocarriers of different physicochemical properties. Poly (ethyl butyl cyanoacrylate) nanoparticles and lipid-based (LipImage™ 815) nanoparticles of comparable hydrodynamic diameter were tested through a battery of assays using human peripheral blood samples and recapitulating the main pathways of the host response upon systemic administration; i.e., protein interactions, fibrinogen-platelet binding, cytotoxicity, and inflammatory response. The data showed the sensitivity and reproducibility of the methods adopted that were also demonstrated to determine individual variability as well as to discriminate between activation of pathways of inflammation and unintended release of inflammatory signaling caused by loss of cell integrity. Therefore, this multistep testing is proposed as a reliable protocol for nanoparticle development and emerging regulatory frameworks.

Formation of protein corona on interaction of pepsin with chitin nanowhiskers in simulated gastric fluid

Protein corona (PC) usually changes the physicochemical properties of nanoparticles (NPs) and determines their ultimate fate in the physiological environment. As NPs are widely used in food, it is important to obtain a deep understanding of PC formation in the gastrointestinal fluid. Herein, we explored the adsorption of pepsin to chitin nanowhiskers (CNWs) and their interactions in simulated gastric fluid. Results suggest that the binding of pepsin reduced the surface potential of CNWs from 22.4 ± 0.15 to 12.9 ± 0.51 mV and caused their aggregation. CNWs quenched the fluorescence of pepsin and induced slightly changes in its secondary structure containing a reduction in the β-sheet content (∼ 3%) and an increase in the random coils (∼ 2%). The isothermal titration calorimetry (ITC) data suggested that the interaction forces between CNWs and pepsin were mainly hydrogen bonds and van der Waals forces.