Three-dimensional relationship between the degree of bilateral impacted mandibular third molars angulation and the mandibular dental arch parameters: a cross-sectional comparative study

OBJECTIVE

The purpose of this study was to three-dimensionally evaluate the relationship between the degree of bilateral impacted mandibular third molar (IM3M) angulation and the mandibular dental arch parameters in normal skeletal and dental malocclusion patients.

MATERIALS AND METHODS

In this retrospective cross-sectional comparative study, 120 adult subjects' cone-beam computed tomography (CBCT) images were three-dimensionally analyzed. The sample included 120 adults aged 20-30 years, with a gender distribution of 51 male and 69 female participants. The sample was divided into 100 adults with bilateral IM3M (study group) and 20 adults with normal bilateral erupted M3M (control group). The study group was sub-divided into three groups according to the degree of IM3M buccolingual angulation (BL°): group A, < 12° on the center of the ridge (N = 30), group B, 12-24° off-center of the ridge (N = 40), group C, > 24° off-center of the ridge (N = 30). The study group was also sub-divided into two groups according to IM3M mesiodistal angulation (MD°): group 1 from 10 to 45° (N = 36), group 2 > 45° (N = 64). Comparison within and between groups was performed using one-way ANOVA followed by Tukey's post hoc test. The correlation between IM3M, BL, and MD angulation and the mandibular arch parameter was calculated using Pearson's correlation coefficient.

RESULTS

Statistically significant differences (P < 0.001) were found between the IM3M BL° and anterior teeth inclination, arch length (AL), and inter-second molar width (inter 2nd MW) as well as between the IM3M MD° with anterior crowding and the arch length (P < 0.001). A significant positive correlation was found between IM3M BL° and anterior teeth inclination and between IM3M MD° and anterior teeth crowding and inter 2nd MW. A significant negative correlation was observed between IM3M BL° and inter 1st MW and 2nd MW.

CONCLUSION

The degree of buccolingual and mesiodistal angulation of the impacted mandibular third molars was related with mandibular dentoalveolar changes. Increased buccolingual angulation is generally associated with increased anterior teeth inclination and decreased 1st and 2nd inter-molar width. The increase in mesiodistal angulations was generally related with increased anterior teeth crowding and 2nd inter-molar width.

CLINICAL RELEVANCE

Assessment of the relationship between the impacted mandibular third molars and the degree of arch discrepancy, and the position of mandibular incisors in the three planes of space might help in the decision-making process for the extraction of the impacted third molars in adult patients.

[The efficacy of muscle function training combined with occlusal inducer in the treatment of malocclusion in children with OSA]

Objective:This study aims to investigate the clinical effectiveness of muscle function training combined with occlusal inducers in the treatment for children's malocclusion after obstructive sleep apnea（OSA） surgery. Methods:A total of 40 pediatric patients who underwent surgery for OSA at Shanghai Children's Medical Center, affiliated with Shanghai Jiao Tong University School of Medicine, from January 2020 to December 2021 were involved in this study. They were divided into a treatment group（n=20） and a control group（n=20）. The treatment group received muscle function training combined with occlusal inducers, while the control group received muscle function training alone. Cephalometric measurements of hard tissues were compared between the two groups before and 12 months after surgery. Additionally, the OSA-18 questionnaire, which includes 18 items to assess the life quality of children with OSA, was filled out before surgery, 6 months after surgery, and 12 months after surgery by these patients. Results:①The scores of sleep disorders, physical symptoms, emotional status, daytime sleepiness and energy status and the degree of influence on guardians in the two groups were significantly improved at 12 months after operation（P<0.05）. The scores of sleep disorders, physical symptoms, emotional status and the degree of influence on guardians in the treatment group were better than those in the control group（P<0.05）. ②Cephalometric data at 12 months after operation showed that the upper and lower alveolar seat angle（ANB）, Overbite, upper and lower central incisor angle（U1-L1） and Overjet in the treatment group were lower than those in the control group at 12 months after operation, and the difference was statistically significant（P<0.05）. Conclusion:Children with OSA can improve the dentition irregularity by muscle function training combined with occlusal inducer after operation, and the effect is better than that of muscle function training alone.

Influential Factors in the Efficacy of Hemoporfin-Mediated Photodynamic Therapy for Port-wine Stains

Hemoporfin-mediated photodynamic therapy (HMME-PDT) is commonly used in the treatment of port-wine stains (PWS). However, the influential factors for the efficacy of the treatment are not well defined. This study intends to observe the influential factors for the efficacy of HMME-PDT in the treatment of port-wine stains (PWS). A total of 551 patients with PWS of head and neck was enrolled in this retrospective study. Further screening the patients of facial PWS, 484 patients were chosen. Patients were treated with HMME-PDT. All patients received 1~3 sessions of treatment with 2~3-month intervals. We photographed the lesions before each session and 2~3 months after the last session. Ages, sessions, lesion subtypes, and previous treatment history were related to the response of HMME-PDT (P =0.032, P<0.001, P=0.012, P=0.003 respectively). Treatment sessions were the independent factor correlated with efficacy after 3 sessions of treatment. Patients with no treatment history targeting PWS showed higher efficacy than those were treated with laser or other photodynamic treatment (P<0.05). The efficacy was higher by increasing the sessions of treatment. The efficacy was higher for lesion on maxillary prominence area and mandibular prominence area that on frontonasal prominence area and optic vesicle area (P<0.05). HMME-PDT is an effective in the treatment of PWS. Patients received no previous treatment for PWS, total treatment sessions and lesion on maxillary prominence area and mandibular prominence area are positive factors.

Evaluation of the maximum tongue and lip pressure in individuals with Class I, II, or III Angle malocclusions and different facial types

PURPOSE

To compare the maximum anterior and posterior tongue pressure, tongue endurance, and lip pressure in Class I, II, and III malocclusions and different facial types.

METHODS

A cross-sectional observational analytical study was carried out in 55 individuals (29 men and 26 women) aged between 18 and 55 years. The participants were divided into groups according to Angle malocclusion (Class I, II, and III) and facial type. The maximum anterior and posterior tongue pressure, tongue endurance, and maximum lip pressure were measured using the IOPI (Iowa Oral Performance Instrument). To determine the facial type, the cephalometric analysis was accomplished using Ricketts VERT analysis as a reference.

RESULTS

There was no statistically significant difference when comparing the maximum pressure of the anterior and posterior regions of the tongue, the maximum pressure of the lips, or the endurance of the tongue in the different Angle malocclusion types. Maximum posterior tongue pressure was lower in vertical individuals than in mesofacial individuals.

CONCLUSION

Tongue and lips pressure, as well as tongue endurance in adults was not associated with the type of malocclusion. However, there is an association between facial type and the posterior pressure of the tongue.

Skeletal Anchorage Augmentation in Extraction/Nonextraction Orthodontic Treatment: A Randomized Clinical Study

AIM

To evaluate and compare skeletal, dental, and soft tissue parameters by therapeutic extraction of first premolar and nonextraction distalization of maxillary and mandibular arches in bimaxillary proclination using the skeletal anchorage system.

MATERIALS AND METHODS

About 40 orthodontic patients undergoing extraction or nonextraction treatment are enrolled in a randomized clinical trial. Participants are randomly assigned to either the extraction or nonextraction group and receive treatment augmented with skeletal anchorage. Mini implants were placed in the extraction group for retraction and infra-zygomatic crest (IZC) and buccal shelf screws were placed in the nonextraction group for distalization.

OBSERVATIONS AND RESULTS

Comparison between the ages of the patients among both Groups showed no significant difference. A significant difference is observed in dental and soft tissue parameters before and after the treatment in group A, whereas skeletal parameters also showed significant changes along with dental and soft tissue parameters in group B.

CONCLUSION

There is a significant change in the position of incisors by retraction and facial profile improves gradually in group A while for group B, a marked change in lower facial height was even seen. On comparing both the groups, a highly significant difference can be seen with respect to the amount of incisor retraction and change in molar inclination. The time taken for retraction of incisors is less in comparison to distalization.

CLINICAL SIGNIFICANCE

With this, we can easily avoid premolar extraction, and in cases of impacted third molars distalization as when indicated can be helpful as a part of the nonextraction treatment plan.

Relative anchorage loss under reciprocal anchorage in mandibular premolar extraction cases treated with clear aligners

OBJECTIVES

To compare mandibular relative anchorage loss (RAL) under reciprocal anchorage between first and second premolar extraction cases in bimaxillary protrusion mild crowding cases treated using clear aligner therapy (CAT).

MATERIALS AND METHODS

Adult patients who met the following criteria were included: treated using CAT with bilateral mandibular premolar extractions and space closure using intra-arch reciprocal anchorage. RAL was defined as the percent molar mesial movement relative to the sum of molar mesial plus canine distal movement. Movements of the mandibular central incisor (L1), canine (L3), and first molar (L6) were measured based on superimposition of the pre- and post-treatment dentition and jaw models.

RESULTS

Among the 60 mandibular extraction quadrants, 38 had lower first premolar (L4) and 22 had lower second premolar (L5) extracted. L6 mesial movement was 2.01 ± 1.11 mm with RAL of 25% in the L4 extraction group vs 3.25 ± 1.19 mm with RAL of 40% in the L5 extraction group (P < .001). Tooth movement efficacy was 43% for L1 occlusogingival movement, 75% for L1 buccolingual inclination, 60% for L3 occlusogingival movement, and 53% for L3 mesiodistal angulation. L1 had unwanted extrusion and lingual crown torquing whereas L3 had unwanted extrusion and distal crown tipping, on which the power ridges or attachments had little preventive effect.

CONCLUSIONS

The average mandibular reciprocal RAL is 25% or 40% for extraction of L4 or L5, respectively, in CAT cases. A RAL-based treatment planning workflow is proposed for CAT extraction cases.

Correlation of "K" plane to occlusal plane and three different ala-tragal lines in dentulous subjects with different skeletal forms: A cephalometric study

Aim

Orientation of the occlusal plane is an important clinical procedure for complete denture fabrication. An attempt had been made to reconstruct the occlusal plane using a different reference plane. The aim of this study was to find the correlation of the "K" plane to the occlusal plane and to assess the angular deviation between the K-plane to the occlusal plane (KO) with different skeletal forms.

Settings and Design

An in vivo observational study was conducted on dentulous subjects having Class I dental occlusion with different skeletal forms undergoing orthodontic treatment.

Materials and Methods

The study was conducted on 54 subjects aged 18-30 years. Metallic balls (3 mm in diameter) were attached to the desired landmarks, and a lateral cephalogram was taken for each subject. Cephalometric analysis was done using the Dolphin Imaging software, and the values obtained were recorded and subjected to statistical analysis.

Statistical Analysis Used

The values obtained were recorded and subjected to statistical analysis using simple descriptive analysis, Shapiro-Wilk test, Mann-Whitney U-test, and Pearson's correlation.

Results

A positive correlation was found between KO with a mean angular deviation of 8.59° ± 3.05°. The angle was found to be steeper in skeletal Class II subjects.

Conclusions

Clinical application of the K-plane to use as a reference plane to orient the posterior occlusal plane can enhance the treatment outcome for a removable prosthesis. The results of this study provide a theoretical foundation for the practical restoration of the occlusal plane in different skeletal forms.

Global perspectives in orofacial cleft management and research

Orofacial clefts (OFCs) refer to clefts of the lip and palate, a heterogeneous group of relatively common congenital conditions that can cause mortality and significant disability if untreated, and residual morbidity even when treated with multidisciplinary care. Contemporary challenges in the field include: lack of awareness of OFCs in remote, rural and impoverished populations; uncertainties due to lack of surveillance and data gathering infrastructure; inequitable access to care in some parts of the world; and lack of political will combined with lack of capacity to prioritise research.OFCs present clinically as either syndromic or non-syndromic, with the latter either being isolated or in conjunction with other malformations; however, many registries still do not differentiate between these fundamentally different entities and lump a spectrum of cleft types and sub-phenotypes together. This has implications for treatment, research and ultimately, quality improvement.This paper deals with the challenges in contemporary management in terms of care and the prospects and possibilities for primary prevention of non-syndromic clefts. In terms of management and optimal care, there are also challenges in the provision of multi-disciplinary treatment and management of the consequences of being born with OFCs, such as dental caries, malocclusion and psychosocial adjustment.

Malocclusions and quality of life among adolescents: a systematic review and meta-analysis

BACKGROUND

Malocclusions in adolescents might have a negative impact on oral health-related quality of life (OHRQoL). Potential confounding variables (confounders) such as age, gender, caries, and socioeconomic status may skew the real relationship between malocclusions and OHRQoL.

OBJECTIVES

To analyse the effect of malocclusions in adolescents on OHRQoL, when controlled for potential confounders.

SEARCH METHODS

Five databases (PubMed, Cochrane Library, Cinahl, Scopus, and Web of Science) were searched up to 15 June 2022.

SELECTION CRITERIA

Studies in which OHRQoL in 10-19-year olds with and without malocclusions were compared.

DATA COLLECTION AND ANALYSIS

Screening, data extraction, and quality assessments were performed by four investigators independently. Risk of bias was assessed according to the Swedish Agency for Health Technology Assessment and Assessment of Social Services (SBU) guidelines. To be included, studies had to control for confounders. Certainty of evidence was assessed with GRADE.

RESULTS

Thirteen cross-sectional studies with low and moderate risk of bias were included in the qualitative synthesis. Four of these were also included in the quantitative synthesis (meta-analysis). The 13 studies in the qualitative synthesis displayed a large variation among the indices used for malocclusion ratings, as well as in instruments measuring OHRQoL. There was moderate quality of evidence that malocclusions have a negative effect on OHRQoL. The four articles included in the quantitative synthesis (meta-analysis) measured malocclusions with DAI and OHRQoL with CPQ 11-14 short form. There was moderate quality of evidence that malocclusions have a negative effect on OHRQoL (RR/PR 1.15, 95% CI 1.12-1.18, 3672 participants).

CONCLUSIONS

There is moderate quality of evidence that malocclusions in adolescents have a negative impact on OHRQoL, after taking relevant confounders into consideration. Future studies should ideally use standardized measures for malocclusion ratings and OHRQoL.

REGISTRATION

PROSPERO. CRD42020186152.

Comparative evaluation of dermatoglyphic patterns between skeletal class I and skeletal class III malocclusion

Background: Dermatoglyphics is the study of various dermal configurations on the fingers, palms, and soles. These appear during the 12th week of intrauterine life and develop completely by the 24th week. It is said that they remain constant thereafter. The aim of the present study was to compare and assess the association of dermatoglyphic patterns between skeletal class I and skeletal class III malocclusion. Methods: Finger and palm prints were collected using the ink and roller method from 604 subjects who were divided into skeletal class I, class III with maxillary retrognathism and class III with mandibular prognathism based on lateral cephalogram assessment. Results: Loop pattern was more predominant in skeletal class I malocclusion subjects and whorl pattern was more frequent in the other two groups. Total finger ridge count and atd angle also showed significant difference between the study groups. Conclusions: The present study attempted in assessing the association between dermatoglyphic patterns and skeletal malocclusion. Analysing dermal configurations may aid in indicating the type of developing malocclusion and thus help in interceptive and preventive orthodontics.

Evaluation of pharyngeal airway volume three-dimensionally in various sagittal skeletal patterns - Systematic review

To investigate the pharyngeal airway volume in different anteroposterior skeletal malocclusions. This study was prepared according to the Cochrane criteria for creating a systematic review and meta-analysis and confirms the preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement. This search was conducted to answer the patient/population, intervention, comparison and outcomes (PICO) question: To evaluate (outcome) and compare (comparison) whether there is a difference in airway volume in patients (participants) with different skeletal malocclusions diagnosed using 3D data (intervention).The first two authors extracted the data from the included studies and assessed the risk of bias in the individual studies using the Newcastle-Ottawa scale. Meta-analysis was done using STATA version 16, which compared various three-dimensional pharyngeal airway parameters in skeletal Class II and skeletal Class III malocclusions with that of skeletal class I malocclusion. Out of 370 articles from the initial search, 17 articles were included in the systematic review. Out of 17 studies, 12 eligible studies were included in the quantitative synthesis. The nasopharynx, oropharynx, hypopharynx, and total airway volume were increased in skeletal Class I malocclusion compared to that of skeletal Class II malocclusion and decreased in comparison to skeletal Class III malocclusion. The moderate quality of evidence indicates the total airway volume, oropharynx, and hypopharynx are largest in skeletal Class III compared to Class I and Class II skeletal malocclusion.

Morphological analysis of anterior permanent dentition in a Chinese population using cone-beam computed tomography

PURPOSE

Morphological analysis of permanent anterior dentition is essential for achieving an ideal treatment outcome and avoiding unnecessary failure. This study aimed to analyze the morphologies of anterior teeth in the Chinese population in depth.

METHODS

In this retrospective study, 4309 anterior teeth from 401 Chinese patients were investigated using cone-beam computed tomography (CBCT) from 2019-2021. We summarized the morphological characteristics of the anterior teeth in terms of the root length, cementoenamel junction curvature (CEJ-C), root furcation and canal variations.

RESULTS

We found that the root lengths of the maxillary anterior incisors were similar (13.3 mm), while the root lengths of the mandibular central (12.2 mm) and lateral incisors (13.4 mm) varied significantly (p < .0001). Both the maxillary (16.6 mm) and mandibular canines (15.5 mm) were found to have greater root lengths than the corresponding incisors (p < .0001). The CEJ-C was significantly greater around incisors (2.5 mm) than around the canines (2.0 mm) in the maxilla (p < .0001), while the curvature remained similar in mandibular anterior teeth (1.8 mm). Root furcation was observed in mandibular canines and lateral incisors. Moreover, all types of Vertucci's classification in anterior dentitions were observed, while two other new types were found. Among them, the maxilla was only observed to exhibit types I, II, III, and ST II, while the mandible was found to exhibit almost all types. However, Type I still accounts for the majority of dentitions.

CONCLUSIONS

Morphological analysis of permanent anterior dentition revealed diversity in the tooth length, CEJ-C, furcation proportion, and canal variations. In general, mandibular anterior teeth showed a more complex structure than maxillary teeth.

Attachments for the Orthodontic Aligner Treatment-State of the Art-A Comprehensive Systematic Review

BACKGROUND

In recent years the burden of aligner treatment has been growing. However, the sole use of aligners is characterized by limitations; thus attachments are bonded to the teeth to improve aligner retention and tooth movement. Nevertheless, it is often still a challenge to clinically achieve the planned movement. Thus, the aim of this study is to discuss the evidence of the shape, placement and bonding of composite attachments.

METHODS

A query was carried out in six databases on 10 December 2022 using the search string ("orthodontics" OR "malocclusion" OR "Tooth movement techniques AND ("aligner*" OR "thermoformed splints" OR "invisible splint*" AND ("attachment*" OR "accessor*" OR "auxill*" AND "position*").

RESULTS

There were 209 potential articles identified. Finally, twenty-six articles were included. Four referred to attachment bonding, and twenty-two comprised the influence of composite attachment on movement efficacy. Quality assessment tools were used according to the study type.

CONCLUSIONS

The use of attachments significantly improves the expression of orthodontic movement and aligner retention. It is possible to indicate sites on the teeth where attachments have a better effect on tooth movement and to assess which attachments facilitate movement. The research received no external funding. The PROSPERO database number is CRD42022383276.

Rate of upper incisor retraction in Class II division 1 patients managed with palatal versus buccal miniscrew supported segmental orthodontics: Randomized parallel clinical trial

OBJECTIVE

This study was conducted to compare maxillary incisor retraction rates using buccal orthodontics with segmented arch approach supported by a buccal or palatal mini-screw in non-growing Class II Division 1 patients during a 3-month period.

PATIENTS AND METHODS

All patients between September 2018 and December 2021 with following criteria were included: non-growing class II division 1 protrusion, indication for premolar extraction, no or little crowding, normal overbite, no previous orthodontic treatment, no systematic disease, good oral hygiene, no periodontal problems or oral habits. Mini-implant was inserted buccally or palatally between upper second premolar and first molar bilaterally. Incisor retraction was manipulated by a 200-gram force through a nickel-titanium closed-coil spring extended from the mini-implant to the segmental design. Study casts were made before retraction and after every 4 weeks (T0: baseline, T1: 4 weeks, T2, 8 weeks, T3: 12 weeks). A repeated measures ANOVA was performed for total comparison of data (mm of retraction) on 3D casts. A pairwise t test with Bonferroni correction was used for comparison between two experimental periods for the same group. An independent samples t-test was also used for comparison between two groups for the same experimental period.

RESULTS

Of 30 patients meeting the eligibility criteria, only 28 were included with mean age 16±2.5 years. Repeated measures ANOVA revealed significant differences in incisor retraction between the time intervals for both buccal and palatal groups (P=0.001). In addition, the paired-sample t test indicated a significant difference between each time interval for both the buccal and palatal groups (P=0.001), except between T3 and T2 for the palatal group (P=0.09). The independent sample t-test revealed significant differences between the buccal and palatal groups at T1 (Mean: 0.55 [0.355-0.748],=0.001) and T2 (Mean: 1.4 [0.91-1.88], P=0.001); whereas no significant difference was found at T3 (Mean: 1.15 [0.67-1.63], P=0.945).

CONCLUSIONS

Anterior retraction using a segmental palatal model with mini-screws was effective regardless of the buccal or palatal situation of the minivis. Retraction of incisors with palatal miniscrews was significantly faster in the first two months.

Impacts of anterior-posterior jaw disproportions on speech of dentofacial disharmony patients

BACKGROUND/OBJECTIVES

Articulation problems impact communication, development, and quality of life, and are diagnosed in 73-87% of patients with Class II Dentofacial Disharmony (DFD). We evaluated whether differences exist in stop (/t/ or/k/), fricative (/s/ or/ʃ/), and affricate (/tʃ/) consonant sounds of Class II DFD subjects, and whether extent of malocclusion correlates with severity of speech distortion. We hypothesized that Class II patients display milder distortions than Class III and anterior open bite (AOB), as Class II patients can posture into a Class I occlusion.

MATERIALS/METHODS

Audio and orthodontic records were collected from DFD patients (N = 53-Class II, 102-Class III, 72-Controls) who were pursuing orthodontics and orthognathic surgery. A speech pathologist perceptually scored speech. Acoustic differences in recordings were measured using Spectral Moment Analysis.

RESULTS

When Class II subjects were compared to controls, significant differences were found for the centroid frequency (M1) of the /s/ sound and the spectral spread (M2) of /t/, /tʃ/, and /s/ sounds, with pairwise significance for controls relative to Class II AOB and all Class II subjects. Class II AOB subjects had higher M1 and M2 values than patients with Class II closed bites and Class I controls for most sounds. When comparing across anterior-posterior (AP) groups, differences exist between controls, Class II and III DFD subjects for M1 of /t/, /tʃ/, and/ʃ/ and M2 for /t/, /tʃ/, /s/, and /ʃ/ sounds. Using linear regression, correlations between Class II and III severity and spectral measures were found for /t/ and /tʃ/ sounds.

CONCLUSIONS/IMPLICATIONS

Class II and III patients have a higher prevalence of qualitative distortions and spectral changes in consonants compared to controls, but Class II spectral shifts are smaller and affect fewer sounds than in Class III and AOB cohorts. Linear correlations between AP discrepancy and spectral change suggest causation and that treatment may improve articulation problems.

Dental Malocclusion in Mixed Dentition Children and Its Relation to Podal System and Gait Parameters

BACKGROUND

Dental malocclusion is an increasingly frequent stomatognathic disorder in children and adolescents nowadays. The purpose of this study was to confirm or deny the correlations between body posture and malocclusion.

METHODS

In the study, gait, distribution of foot pressure on the ground, and body balance were examined. The research group consisted of 76 patients aged 12-15 years. The research group was obtained from patients attending periodic dental check-ups at Healthcare Center Your Health EL who agreed to participate in the study. The patients were divided into two groups without malocclusion and with malocclusion, using Angle classification, which enabled determination of the anteroposterior relationship of the first molars. The pedobarographic mat was used to analyze the distribution of foot forces on the ground, the diagnostic system Wiva^® Science was used for gait analysis, and Kineod 3D was used for posture analysis. The Shapiro-Wilk test used for analysis showed inconsistency with normal distribution for all measurement parameters. The Mann-Whitney U test was used for the analysis, and the significance level was set at p ≤ 0.05.

RESULTS

Examination of the relationship between stabilometric and gait parameters showed that the position of the mandible in relation to maxilla has an important effect on gait rhythm, gait cycle duration, and right step duration time. Patients diagnosed with malocclusion showed high-speed walking rhythm in comparison to patients with Angle's class I (p = 0.010). The duration of the whole gait cycle (p = 0.007) and the duration of right step (p = 0.027) were prolonged in students without orthodontic disorders compared to the other.

CONCLUSIONS

The conducted study proved that there is correlation between the presence of a stomatognathic disorder and gait cycle parameters. There is a statistically noticeable correspondence between the position of the mandible in relation to maxilla and walking rhythm, gait cycle duration, and right step duration time. Namely, students who presented malocclusion had a high-speed walking rhythm and decreased duration of the gait cycle and of the right step. On the other hand, students without disorders (Angle's class I) showed low-speed rhythm and increased duration of the gait cycle and of the right step in comparison to Angle's classes II and III.

Patterns of nonsyndromic tooth agenesis and sexual dimorphism

BACKGROUND

Sex dimorphism has been implicated in oral health differences and the pathogenesis of oral diseases, such as tooth agenesis, periodontal disease, dental caries, and tooth loss. Tooth agenesis (TA) is one of the most common developmental anomalies in humans, and its prevalence and patterns are different across ethnic groups. The aim of this study was to investigate the phenotypes and sex-associated patterns of nonsyndromic tooth agenesis (TA) in Thai dental patients.

METHODS

One thousand ninety panoramic radiographs were examined. One hundred and one subjects (37 males, 64 females, 15-20 years-old) with nonsyndromic TA were evaluated. Differences in TA prevalence between groups were analyzed using the chi-square or Fisher exact test.

RESULTS

The TA prevalence, excluding third molars, was 9.3% and more frequently found in the mandible compared with the maxilla. The maxilla demonstrated a higher prevalence of first premolar agenesis than the mandible (P = 0.012), while the mandible had a higher prevalence of second premolar agenesis than the maxilla (P = 0.031). There were significantly more males missing one tooth than females, however, there were more females missing two or more teeth than males (P = 0.042). A missing maxillary left lateral incisor was significantly more frequent in males (P = 0.019), while a missing mandibular right lateral incisor was more frequent in females (P = 0.025). In females, the pattern of two mandibular lateral incisors agenesis was the most common and significantly present in females more than males (P = 0.015). In contrast, the pattern of one mandibular left lateral incisor agenesis was only observed in males and significantly found in males more than females (P = 0.047).

CONCLUSIONS

We demonstrate sex-associated differences in nonsyndromic tooth agenesis. The prevalence of single tooth agenesis was higher in males, while that of two or more teeth agenesis was higher in females. We found different patterns of lateral incisor agenesis between males and females.

Is There a Correlation between Dental Occlusion, Postural Stability and Selected Gait Parameters in Adults?

Background: There is still an ongoing debate about the role of the craniomandibular system, including occlusal conditions, on postural stability. This study aims to assess the role of antero-posterior malocclusion on postural control and plantar pressure distribution during standing and walking. Methods: 90 healthy volunteers (aged 19 to 35) were qualified for the study. The subjects were assigned to three groups, depending on the occlusion type. Each group (Angle Class I, II and III) consisted of 30 people. The research procedure included a clinical occlusal assessment performed by a dentist. Postural control measurements were carried out using a force platform by measuring plantar pressure distribution during standing (six trials with and without visual control) and walking test conditions. Results: The tendency to shift the CoP forward is demonstrated by Angle Class II subjects and backwards by Class I and III subjects (p < 0.001). Individuals with a malocclusion demonstrated significantly higher selected stabilographic parameters while standing on both feet (with eyes open and closed) and during the single-leg test with eyes open (p < 0.05). The analysis of the dynamic test results showed no significant correlations between Angle Classes and the selected gait parameters. Conclusions: Analyses conducted among individuals with malocclusions showed the impact of occlusion on static postural stability. In order to diagnose and effectively treat malocclusion, a multidisciplinary approach with the participation of dentists and physiotherapy specialists is necessary, with the use of stabilometric and kinematic posture assessments.

Artificial intelligence system for automated landmark localization and analysis of cephalometry

OBJECTIVES

Cephalometric analysis is essential for diagnosis, treatment planning and outcome assessment of orthodontics and orthognathic surgery. Utilizing artificial intelligence (AI) to achieve automated landmark localization has proved feasible and convenient. However, current systems remain insufficient for clinical application, as patients exhibit various malocclusions in cephalograms produced by different manufacturers while limited cephalograms were applied to train AI in these systems.

METHODS

A robust and clinically applicable AI system was proposed for automatic cephalometric analysis. First, 9870 cephalograms taken by different radiography machines with various malocclusions of patients were collected from 20 medical institutions. Then 30 landmarks of all these cephalogram samples were manually annotated to train an AI system, composed of a two-stage convolutional neural network and a software-as-a-service system. Further, more than 100 orthodontists participated to refine the AI-output landmark localizations and retrain this system.

RESULTS

The average landmark prediction error of this system was as low as 0.94 ± 0.74 mm and the system achieved an average classification accuracy of 89.33%.

CONCLUSIONS

An automatic cephalometric analysis system based on convolutional neural network was proposed, which can realize automatic landmark location and cephalometric measurements classification. This system showed promise in improving diagnostic efficiency in clinical circumstances.

Assessment of tooth displacement during the cast-free digital processing of milled dentures

STATEMENT OF PROBLEM

Denture tooth displacement may have a significant impact on denture occlusion. This aspect has seldom been investigated, especially for digital denture processing techniques.

PURPOSE

The purpose of this clinical study was to evaluate the accuracy of tooth position with milled digital dentures processed without physical casts.

MATERIAL AND METHODS

Ten maxillary and 10 mandibular dentures designed from intraoral scans, milled, and processed without physical casts were investigated. The standard tessellation language (STL) files of the digitally designed dentures were compared with the scan of the dentures after processing (milling the denture base, milling teeth in a complete arch, and then bonding teeth into the base). The STL files were superimposed by using a surface-matching software program. After a preliminary alignment, the STL meshes were trimmed and reoriented; then, the final alignment was carried out by using the cameo surface. Six reference points (the mesiobuccal cusp on the most distal molar, the canine cusp, the middle of the incisal edge of the central incisor on both the left and the right side) were selected to measure tooth displacements along the X-, Y-, and Z-axes, corresponding (from the preliminary reorientation) to anteroposterior, mediolateral, and occlusal displacement, respectively. Tooth position accuracy was assessed by using median and interquartile range values. Univariate and multivariate statistical analyses were used to investigate the significance of the extent of displacements, as well as differences among displacement directions, reference teeth, side, and denture arch type (α=.05).

RESULTS

Only the median (0.2 mm; interquartile range: 0.27 mm) occlusal displacement was significantly different from zero. A generalized estimated equation model addressing occlusal displacement as a dependent variable showed no significant effect of tooth type, side, or denture arch type, either alone or in combination.

CONCLUSIONS

The tooth position of both maxillary and mandibular milled digital dentures processed without physical casts was accurate in the anteroposterior and mediolateral directions. Occlusal displacement seemed to be within the range of clinical acceptability; its consistency throughout the arch allowed optimization or compensation at the design or manufacturing step.

Orthodontic treatment protocols in patients with alveolar clefting: a survey of ACPA-approved cleft teams in the United States

OBJECTIVES

To describe pre- and post-alveolar bone graft (ABG) practice protocols of orthodontists associated with American Cleft Palate-Craniofacial Association-approved cleft and cleft/craniofacial teams.

MATERIALS AND METHODS

Electronic survey responses from team orthodontists were evaluated regarding pre-ABG orthodontic treatment type(s), timing of post-ABG imaging and post-ABG orthodontic treatment, and craniofacial orthodontic fellowship training status of the team orthodontists. A P value of <.05 was considered significant.

RESULTS

Of 31 responding orthodontists, 54.8% had fellowship training and 45.2% did not. Pre-ABG orthodontic preparation ranged from solely maxillary expansion for alveolar segment alignment (35.5%) to a combination of maxillary expansion for both alveolar segment alignment and posterior crossbite correction, anterior tooth alignment, and anterior crossbite correction (19.4%). Most captured post-ABG radiographs prior to orthodontic tooth movement (90.3%). Orthodontists began treatment at least 6 months (35.5%), 2-4 months (32.3%), or 4-6 months (29%) post-ABG. No significant differences were found when comparing fellowship subgroups. In addition, 47.1% of fellowship-trained orthodontists deferred post-ABG orthodontic treatment to at least 6 months post-operatively, vs 21.4% of non-fellowship trained orthodontists (P = .14).

CONCLUSIONS

A large variation in approaches is evident in pre-ABG orthodontic treatment types and timing of post-ABG treatment. Post-operative imaging is pursued by most orthodontists to assess graft status prior to initiating orthodontic treatment. Additional clinical research is needed to support providers in their decision-making with regard to evidence-based approaches.

Factors affecting the efficacy of Invisalign in anterior tooth rotation

INTRODUCTION

The objectives of this study were to evaluate the clinical efficacy of SmartTrack aligner in rotational movement of the anterior tooth by 15°-30°, and to analyze the factors influencing anterior tooth rotational movement.

METHODS

A total of 212 teeth, including 4 tooth types (maxillary central incisor, maxillary lateral incisor, mandibular central incisor, and mandibular canine) that require anterior tooth rotational movement by 15°-30° were selected from 123 patients, with a mean age of 25.6 years. Rotational movements were calculated from the superimposition of the initial and predicted models (predicted rotational movement) and from the superimposition of the initial and achieved models (achieved rotational movement) using the best-fit alignment tool in NX Imageware. The difference between the predicted and achieved rotational movements (DPARM) was calculated. Univariate analysis, categorical regression analysis, and subgroup analysis were performed on 7 variables: age, gender, tooth type, predicted rotational movement, attachment type, interproximal reduction (IPR), and the total number of active aligners.

RESULTS

The mean DPARM when the anterior tooth was rotated 15°-30° was 4.46° (range, -3.52° to 25.28°). Regression analysis showed that the patient's age, IPR, tooth type, and predicted rotational movement affected DPARM (P <0.01).

CONCLUSIONS

Factors influencing the DPARM of the anterior tooth include the patient's age, tooth type, the magnitude of the predicted rotational movement, and whether or not IPR was prescribed.

CEEMDAN-IPSO-LSTM: A Novel Model for Short-Term Passenger Flow Prediction in Urban Rail Transit Systems

Urban rail transit (URT) is a key mode of public transport, which serves for greatest user demand. Short-term passenger flow prediction aims to improve management validity and avoid extravagance of public transport resources. In order to anticipate passenger flow for URT, managing nonlinearity, correlation, and periodicity of data series in a single model is difficult. This paper offers a short-term passenger flow prediction combination model based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and long-short term memory neural network (LSTM) in order to more accurately anticipate the short-period passenger flow of URT. In the meantime, the hyperparameters of LSTM were calculated using the improved particle swarm optimization (IPSO). First, CEEMDAN-IPSO-LSTM model performed the CEEMDAN decomposition of passenger flow data and obtained uncoupled intrinsic mode functions and a residual sequence after removing noisy data. Second, we built a CEEMDAN-IPSO-LSTM passenger flow prediction model for each decomposed component and extracted prediction values. Third, the experimental results showed that compared with the single LSTM model, CEEMDAN-IPSO-LSTM model reduced by 40 persons/35 persons, 44 persons/35 persons, 37 persons/31 persons, and 46.89%/35.1% in SD, RMSE, MAE, and MAPE, and increase by 2.32%/3.63% and 2.19%/1.67% in R and R², respectively. This model can reduce the risks of public health security due to excessive crowding of passengers (especially in the period of COVID-19), as well as reduce the negative impact on the environment through the optimization of traffic flows, and develop low-carbon transportation.

Study of pharyngeal airway morphology with CBCT: Benefits of four premolar extraction orthodontic treatments

BACKGROUND AND AIM

Four premolars extractions are routine procedures for correction of malocclusion, but will inevitably lead to a reduction of tongue space, whether this will weaken the pharyngeal airway remains a controversy.

PATIENTS AND METHODS

Cone-beam computed tomography (CBCT) radiographs of 80 patients who completed four premolar extraction orthodontic treatments were collected and divided into three anteroposterior skeletal groups according to the ANB (angle subspinale to nasion to supramentale) value. Linear, angular, cross-sectional area, and volumetric dimensions of the pharyngeal airway were measured using Dolphin Imaging 11.9 software. One-way analysis of variance and Pearson's correlation coefficient test were performed to assess the intergroup comparisons. Treatment changes were evaluated with two-sample t-tests.

RESULTS

In intergroup comparisons, vertical linear and cross-sectional area differences were identified in S-Go/N-Me, VD1, VD1/N-Me, VD2/N-Me, AA, OAA and OMINI (p<0.05), while other measurements showed no significant differences. Angle2, the tilting degree of the pharyngeal airway, showed a positive correlation with ANB (p<0.05). As for the treatment changes, a significant increase was found in the pharyngeal airway in the Class I group (OUA p<0.05, VD1 p<0.001, VD2 p<0.05) and Class II group (VD1 p<0.001. VD2, p<0.05), and inversely, a significant decrease was found in the pharyngeal airway in the Class III group (OAA p<0.05, OMINI p<0.05, OUA p<0.05). No volumetric difference was identified. Interestingly, regarding the preoperative pharyngeal airway size, values trended to the mean value significantly.

CONCLUSION

Four premolar extraction orthodontic treatments did not affect the pharyngeal airway volume except for the vertical liner and cross-sectional area dimensions. The trend of the gold standard suggested a positive influence of four premolar extraction orthodontic treatments.