Preparation of nickel-cobalt nanowire arrays anode electro-catalyst and its application in direct urea/hydrogen peroxide fuel cell

Electrodegradation of nitrogenous pollutants in sewage: from reaction fundamentals to energy valorization applications

The excessive accumulation of nitrogen pollutants (mainly nitrate, nitrite, ammonia nitrogen, hydrazine, and urea) in water bodies seriously disrupts the natural nitrogen cycle and poses a significant threat to human life and health. Electrolysis is considered a promising method to degrade these nitrogenous pollutants in sewage, with the advantages of high efficiency, wide generality, easy operability, retrievability, and environmental friendliness. For particular energy devices, including metal-nitrate batteries, direct fuel cells, and hybrid water electrolyzers, the realization of energy valorization from sewage purification processes (e.g., valuable chemical generation, electricity output, and hydrogen production) becomes feasible. Despite the progress in the research on pollutant electrodegradation, the development of electrocatalysts with high activity, stability, and selectivity for pollutant removal, coupled with corresponding energy devices, remains a challenge. This review comprehensively provides advanced insights into the electrodegradation processes of nitrogenous pollutants and relevant energy valorization strategies, focusing on the reaction mechanisms, activity descriptors, electrocatalyst design, and actuated electrodes and operation parameters of tailored energy conversion devices. A feasibility analysis of electrodegradation on real wastewater samples from the perspective of pollutant concentration, pollutant accumulation, and electrolyte effects is provided. Challenges and prospects for the future development of electrodegradation systems are also discussed in detail to bridge the gap between experimental trials and commercial applications.

Structural Design of Nickel Hydroxide for Efficient Urea Electrooxidation

Urea stands as a ubiquitous environmental contaminant. However, not only does urea oxidation reaction technology facilitate energy conversion, but it also significantly contributes to treating wastewater rich in urea. Furthermore, urea electrolysis has a significantly lower theoretical potential (0.37 V) compared to water electrolysis (1.23 V). As an electrochemical reaction, the catalytic efficacy of urea oxidation is largely contingent upon the catalyst employed. Among the plethora of urea oxidation electrocatalysts, nickel-based compounds emerge as the preeminent transition metal due to their cost-effectiveness and heightened activity in urea oxidation. Ni(OH)2 is endowed with manifold advantages, including structural versatility, facile synthesis, and stability in alkaline environments. This review delineates the recent advancements in Ni(OH)2 catalysts for electrocatalytic urea oxidation reaction, encapsulating pivotal research findings in morphology, dopant incorporation, defect engineering, and heterogeneous architectures. Additionally, we have proposed personal insights into the challenges encountered in the research on nickel hydroxide for urea oxidation, aiming to promote efficient urea conversion and facilitate its practical applications.

Preparation of nickel foam modified by multiwalled hollow spheres of NiCo2O4 as a promising non-enzymatic glucose sensor

Nickel foam modified by hollow sphere NiCo2O4 particles was successfully prepared via a hydrothermal method using nanosphere SiO2 particles as the hard template for the hollow structure. Characterisation using SEM-EDX and TEM confirmed the structure as multiwalled hollow spheres with an average size of 270 nm, while characterisation using SEM, XRD, and XPS confirmed that the NiCo2O4 particles were attached on the surface of the nickel foam. BET analysis showed that the surface area of the synthesized NiCo2O4@Ni foam was nearly three times higher compared to that of the unmodified Ni foam. Investigation of the NiCo2O4-modified nickel foam as an electrode for the detection of glucose in sodium hydroxide solution showed high linearity of the anodic currents (R2 = 0.99) in the concentration range of 0-2.5 μM with sensitivity of 0.060 mA μM-1 and an estimated limit of detection of 0.060 μM. Excellent stability of the current response was also obtained with a relative standard deviation of 1.51% (n = 10). Furthermore, the developed sensor demonstrates strong applicability for glucose detection in real samples of human blood plasma, making it highly suitable for practical use. The results indicate that the material is promising for the further development of nickel-based sensors.

Urea catalytic oxidation for energy and environmental applications

Urea is one of the most essential reactive nitrogen species in the nitrogen cycle and plays an indispensable role in the water-energy-food nexus. However, untreated urea or urine wastewater causes severe environmental pollution and threatens human health. Electrocatalytic and photo(electro)catalytic urea oxidation technologies under mild conditions have become promising methods for energy recovery and environmental remediation. An in-depth understanding of the reaction mechanisms of the urea oxidation reaction (UOR) is important to design efficient electrocatalysts/photo(electro)catalysts for these technologies. This review provides a critical appraisal of the recent advances in the UOR by means of both electrocatalysis and photo(electro)catalysis, aiming to comprehensively assess this emerging field from fundamentals and materials, to practical applications. The emphasis of this review is on the design and development strategies for electrocatalysts/photo(electro)catalysts based on reaction pathways. Meanwhile, the UOR in natural urine is discussed, focusing on the influence of impurity ions. A particular emphasis is placed on the application of the UOR in energy and environmental fields, such as hydrogen production by urea electrolysis, urea fuel cells, and urea/urine wastewater remediation. Finally, future directions, prospects, and remaining challenges are discussed for this emerging research field. This critical review significantly increases the understanding of current progress in urea conversion and the development of a sustainable nitrogen economy.

Direct Urea/H2O2 Fuel Cell with a Hierarchical Porous Nanoglass Anode for High-Efficiency Energy Conversion

Direct urea/H₂O₂ fuel cells (DUFCs) constitute a sustainable bifunctional energy conversion technique devoted to simultaneously eliminating environmental wastewater with urea and generating clean energy. However, exploring an efficient anode material for DUFCs still remains a huge challenge. In this work, a Ni-P hierarchical porous nanoglass (HPNG) catalytic electrode was developed via a low-cost, industrially available electrodeposition technique, which exhibits one of the best performances reported so far in the urea oxidation reaction (UOR), with a potential of 1.330 V at a current density of 10 mA cm^-2 and a Tafel slope of 9.77 mV dec^-1. The superior UOR performance of the HPNG electrode is attributed to the excellent intrinsic catalytic activity of NG with a high-energy state and an extremely enlarged surface area from the unique 3D hierarchical porous structure. Furthermore, a DUFC system with the HPNG anode shows a performance breakthrough as indicated by the maximum power density of 38.15 mW cm^-2 for 0.5 M urea, representing one of the best yet reported DUFCs. Our work demonstrates the feasibility of the scalable production of HPNG electrodes and is expected to be a great contribution to the development of the practical use of DUFCs in the near future for bifunctional energy conversion.

Unconventional Phase Synergies with Doping Engineering Over Ni Electrocatalyst Featuring Regulated Electronic State for Accelerated Urea Oxidation

Exploring high-performing Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy technologies yet remains a daunting challenge. In this study, a synergistic anomalous hcp phase and heteroatom doping engineering over metallic Ni are found to enhance the UOR. A metal-organic framework-mediated approach is proposed to construct Ni nanoparticles (NPs) with designated crystal phase embedded in N-doped carbon (fcc-Ni/NC and hcp-Ni/NC). Significant crystal phase-dependent catalytic activity for the UOR is observed; hcp-Ni/NC, featuring unusual hcp phase, outperforms fcc-Ni/NC with conventional fcc phase. Moreover, incorporating foreign Mn species in hcp-Ni/NC can further dramatically promote UOR, making it among the best UOR catalysts reported to date. From experimental results and DFT calculations, the specific nanoarchitecture, involving an anomalous hcp phase together with Mn doping engineering, endows hcp-MnNi/NC with abundant exposed active sites, facile charge transfer, and more significantly, optimized electronic state, giving rise to enriched Ni³⁺ active species and oxygen vacancies on the catalyst surface during electrocatalysis. These features collectively contribute to the enhanced UOR activity. This work highlights a potent design strategy to develop advanced catalysts with regulated electronic state through synergistic crystal phase and doping engineering.

Green Synthesis of NiO Nanoflakes Using Bitter Gourd Peel, and Their Electrochemical Urea Sensing Application

To determine urea accurately in clinical samples, food samples, dairy products, and agricultural samples, a new analytical method is required, and non-enzymatic methods are preferred due to their low cost and ease of use. In this study, bitter gourd peel biomass waste is utilized to modify and structurally transform nickel oxide (NiO) nanostructures during the low-temperature aqueous chemical growth method. As a result of the high concentration of phytochemicals, the surface was highly sensitive to urea oxidation under alkaline conditions of 0.1 M NaOH. We investigated the structure and shape of NiO nanostructures using powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). In spite of their flake-like morphology and excellent crystal quality, NiO nanostructures exhibited cubic phases. An investigation of the effects of bitter gourd juice demonstrated that a large volume of juice produced thin flakes measuring 100 to 200 nanometers in diameter. We are able to detect urea concentrations between 1-9 mM with a detection limit of 0.02 mM using our urea sensor. Additionally, the stability, reproducibility, repeatability, and selectivity of the sensor were examined. A variety of real samples, including milk, blood, urine, wheat flour, and curd, were used to test the non-enzymatic urea sensors. These real samples demonstrated the potential of the electrode device for measuring urea in a routine manner. It is noteworthy that bitter gourd contains phytochemicals that are capable of altering surfaces and activating catalytic reactions. In this way, new materials can be developed for a wide range of applications, including biomedicine, energy production, and environmental protection.

Hydrothermal synthesis of Mn3O4 nanorods modified indium tin oxide electrode as an efficient nanocatalyst towards direct urea electrooxidation

Control fabrication of metal-oxide nanocatalysts for electrochemical reactions has received considerable research attention. Here, manganese oxide (Mn₃O₄) nanorods modified indium tin oxide (ITO) electrodes were prepared based on the in-situ one-step hydrothermal methods. The nanorods were well characterized using field emission scanning electron microscopy, Fourier transform infrared, and X-ray diffraction spectroscopy. The results showed the formation of pure crystalline Mn₃O₄ nanorods with a length of approximately 1.4 μm and a thickness of approximately 100 ± 30 nm. The Mn₃O₄ nanorod-modified ITO electrodes were used for accelerating urea electrochemical oxidation at room temperature using cyclic and square wave voltammetry techniques. The results indicated that the modified electrode demonstrated excellent electrocatalytic performance toward urea electrooxidation in an alkaline medium over concentrations ranging from 0.2 to 4 mol/L. The modified electrode showed high durability, attaining more than 88% of its baseline performance after 150 cycles; furthermore, the chronoamperometry technique demonstrated high stability. Thus, the Mn₃O₄ nanorod-modified ITO electrode is a promising anode for direct urea fuel cell applications.

Ni-Fe Layered Double Hydroxide Nanosheets Supported on Exfoliated Graphite for Efficient Urea Oxidation in Direct Urea Fuel Cells

Urea-rich wastewater can cause serious eutrophication problem to the water environment. On the other hand, urea is a potential fuel with high energy density, which can be effectively utilized by direct urea fuel cell. In this work, exfoliated graphite (EG) with high surface area and electrical conductivity was obtained by microwave irradiation, which was used to support the Ni-Fe layered double hydroxide (LDH), leading to a highly efficient and low-cost urea oxidation catalyst. Compared with commercial RuO₂ , the as-prepared Ni-Fe LDH/EG exhibited a lower onset potential of 1.25 V vs. reversible hydrogen electrode as well as a lower Tafel slope of 44 mV dec^-1 . The catalyst durability was also proved to be excellent. The optimized Ni/Fe molar ratio was confirmed to be 3 : 1, while the most suitable catalyst/EG ratio was 3 : 50. When applied in a dual-electrolyte direct urea fuel cell, the peak power density reached 12 mW cm^-2 , and the long-term discharge was also stable with negligible voltage loss at 10 mA cm^-2 for 3 h. Such a low-cost and efficient urea oxidation catalyst can be widely utilized in future direct urea fuel cells, which achieve wastewater treatment and renewable electricity generation at the same time.

Coordination Polymer Framework-Derived Ni-N-Doped Carbon Nanotubes for Electro-Oxidation of Urea

Electrochemical oxidation of urea (UOR) is critical in the removal of urea from wastewater and energy conservation and storage. Nickel-based catalysts are widely used for urea-ORR, but in all cases, the nickel must be hybridized with carbon materials to improve its conductivity. In this manuscript, we demonstrate the synthesis of a nickel-decorated carbon nanotube (Ni-NCNT) by simple microwave pyrolysis of Dabco (1,4-diazabicyclo[2.2.2]octane)-based coordination polymer frameworks (CPF). The surface structure, morphology and chemical composition of Ni-NCNT were characterized by Raman spectrum, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy (EDS) analysis. SEM studies showed micrometer-long bamboo-shaped CNTs with nickel nanoparticles anchored to the walls and inside the nanotubes. A structural study by TEM and Raman spectra showed that carbon nanotubes are rich in defects due to the presence of nitrogen, and this was confirmed by energy-dispersive X-ray spectroscopy (EDS) maps. When applied as electrocatalysts in urea oxidation reactions (UOR), our newly developed Ni-NCNT shows excellent electrocatalytic activity and stability, making it a versatile catalyst in energy generation and mitigating water contamination.

Recent progress in direct urea fuel cell

Direct urea fuel cell (DUFC) has attracted many researchers’ attention due to the use of wastewater, for example urine, which contains urea for the fuel. The main factor to improve the electrochemical oxidation performance of urea and further enhance the performances of DUFC is the use of a good anode catalyst. Non-noble metal catalyst, such as nickel, is reported to have a good catalytic activity in alkaline medium towards urea electro-oxidation. Besides optimizing the anode catalyst, the use of supporting electrode which has a large surface area as well as the use of H2O2 as an oxidant to replace O2 could help to improve the performances. The recent progress in anode catalysts for DUFC is overviewed in this article. In addition, the advantages and disadvantages as well as the factors that could help to escalate the performance of DUFC are discussed together with the challenges and future perspectives.

Ni and Co synergy in bimetallic nanowires for the electrochemical detection of hydrogen peroxide

The development of a highly sensitive and selective non-enzymatic electrode catalyst for the detection of a target molecule was remained a great challenge. In this regard, bimetallic nanowires (BMNWs) are considered as promising electrode material for their fascinating physical/chemical properties superior to a single system. In this article, nickel cobalt (Ni _x -Co) BMNWs with tunable stoichiometry were prepared by a template assisted electrodeposition method and their catalytic performance was investigated for the detection of hydrogen peroxide (H₂O₂). It has been found that Ni-Co (0.5:1) BMNWs/PC electrode exhibits superior non-enzymatic sensing ability toward H₂O₂ detection with a high selectivity. The electrode shows fast response within ∼3 s and an excellent reproducible sensitivity of 2211.4 μAmM^-1 cm^-2, which is the best compared to the individual Ni, Co, Ni-Co (0.3:1) BMNWs and previously reported electrodes. In addition, the electrode shows a linear response in the wide concentration range from 0.005 mM to 9 mM, low detection limit of 0.5 μM (S/N = 3.2) and a relatively long-term storage (50 d). Moreover, the sensor reveals excellent results for H₂O₂ detection in the real samples. The enhanced sensitivity of the Ni-Co (0.5:1) BMNWs based electrode may be due to the stable structure and synergy of Ni and Co. The results demonstrate that the catalytic activity of the electrode binary catalyst towards H₂O₂ detection can be improved by adjusting the Ni/Co ratio in BMNWs. The excellent performance of the electrode suggests that Ni-Co BMNWs are promising candidate for the construction of cost-effective electrochemical sensors for medical and industrial applications.

Effect of Co3O4 Nanoparticles on Improving Catalytic Behavior of Pd/Co3O4@MWCNT Composites for Cathodes in Direct Urea Fuel Cells

Direct urea fuel cells (DUFCs) have recently drawn increased attention as sustainable power generation devices because of their considerable advantages. Nonetheless, the kinetics of the oxidation-reduction reaction, particularly the electrochemical oxidation and oxygen reduction reaction (ORR), in direct urea fuel cells are slow and hence considered to be inefficient. To overcome these disadvantages in DUFCs, Pd nanoparticles loaded onto Co₃O₄ supported by multi-walled carbon nanotubes (Pd/Co₃O₄@MWCNT) were employed as a promising cathode catalyst for enhancing the electrocatalytic activity and oxygen reduction reaction at the cathode in DUFCs. Co₃O₄@MWCNT and Pd/Co₃O₄@MWCNT were synthesized via a facile two-step hydrothermal process. A Pd/MWCNT catalyst was also prepared and evaluated to study the effect of Co₃O₄ on the performance of the Pd/Co₃O₄@MWCNT catalyst. A current density of 13.963 mA cm^-2 and a maximum power density of 2.792 mW cm^-2 at 20 °C were obtained. Pd/Co₃O₄@MWCNT is a prospectively effective cathode catalyst for DUFCs. The dilution of Pd with non-precious metal oxides in adequate amounts is economically conducive to highly practical catalysts with promising electrocatalytic activity in fuel cell applications.

A highly active Ni-based anode material for urea electrocatalysis by a modified sol-gel method

A highly electroactive Ni-based catalyst for urea oxidation is prepared by a sol-gel method with bubbling of gel mixture. It is observed that the conditions for the gel formation strongly affect the morphology and electrochemical properties of the catalyst materials. As synthesized Ni-catalysts are characterized by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The Ni-based catalyst prepared at optimum conditions in the scope of this study exhibits the urea oxidation activity of 570 mA mg^-1 (at 0.54 V). In a single urea/hydrogen peroxide fuel cell test, the Ni-catalyst provides maximum power densities of 19.6 and 36.4 mW cm^-2 at 30 and 70 °C, respectively. Additionally, the cell catalyst shows a stable voltage for 3 days. Thus, this work suggests that a novel Ni-based catalyst derived from a facile method can be used for urea oxidation and as an efficient anode material for urea fuel cells.

Metal-organic framework-derived Ni@C and NiO@C as anode catalysts for urea fuel cells

Highly porous self-assembled nanostructured Ni@C and NiO@C were synthesized via calcination of a Ni-based metal–organic framework. The morphology, structure, and composition of as synthesized Ni@C and NiO@C were characterized by SEM, FIB-SEM, TEM, and XRD. The electro-catalytic activity of the Ni@C and NiO@C catalysts towards urea oxidation was investigated using cyclic voltammetry. It was found that the Ni@C had a higher residual carbon content and a higher specific surface area than NiO@C, thus exhibiting an enhanced electrochemical performance for urea oxidation. A direct urea fuel cell with Ni@C as an anode catalyst featured an excellent maximum power density of 13.8 mW cm⁻² with 0.33 M urea solution in 1 M KOH as fuel and humidified air as oxidant at 50 °C, additionally showing excellent stability during continuous 20-h operation. Thus, this work showed that the highly porous carbon-supported Ni catalysts derived from Ni-based metal–organic framework can be used for urea oxidation and as an efficient anode material for urea fuel cells.

A Li–urine battery based on organic/aqueous hybrid electrolytes

Urea/urine as a renewable energy source is attracting extensive attention, which represents a promising prospect toward ensuring a clean environment and energy utilization.

Tungsten Carbide and Cobalt Modified Nickel Nanoparticles Supported on Multiwall Carbon Nanotubes as Highly Efficient Electrocatalysts for Urea Oxidation in Alkaline Electrolyte

The tungsten carbide and cobalt-modified Ni-based catalyst [Ni-Co-WC/multiwall carbon nanotubes (MWCNTs)], synthesized through a sequential impregnation method, was evaluated for the urea electrooxidation in alkaline electrolyte to reduce the overpotential and increase the current density simultaneously. The as-prepared Ni-Co-WC/MWCNTs catalyst was characterized using scanning electron microscopy-EDX, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Characterization results indicate that Ni, Co, and WC nanoparticles are uniformly distributed on the MWCNTs. For the Ni-Co-WC/MWCNT electrode, the maximum current density for urea electrooxidation is more than 4 times higher than that of the Ni/C catalyst, with a reduction of 120 mV in the onset overpotential. In addition, the Ni-Co-WC/MWCNTs catalyst also shows an enhanced catalytic stability with a continuous higher current density under steady-state conditions.

Recent Advances in the Electro-Oxidation of Urea for Direct Urea Fuel Cell and Urea Electrolysis

This paper provides an overview of recent advances in urea electro-oxidation. Urea sources are abundant from human urine, urea-containing wastewater, and industrial urea, thus becoming an attractive option as anodic fuel for the application in direct urea fuel cells (DUFCs). Besides, as a hydrogen-rich chemical fuel, urea can also be electrolyzed to produce hydrogen for energy storage in the near future. The exact mechanisms of urea decomposition are pretty different in alkaline or neutral mediums and are separately discussed in detail. More importantly, the development of anodic electro-catalysts is of great significance for improving the electrochemical performance of both DUFCs and urea electrolysis cells, which is systematically summarized in our review. Challenges and prospects on the future development of urea electro-oxidation are particularly proposed.