Black carbon in major global source areas from 2000 to 2023: Spatiotemporal variation, vertical distribution, and extreme case analysis

Black carbon (BC) emissions in regions such as Eastern China (EC), the Indian Subcontinent (IS), Sub-Saharan Africa (SSA), and Central South America (CSA) notably affect global air quality, climate change, and human health, owing to intensive anthropogenic activities and biomass burning. Using modern-era retrospective analysis for research and applications, version 2 reanalysis data and emission inventories, we quantified the long-term spatiotemporal variations and vertical distributions of atmospheric BC and anthropogenic emissions across various sectors (2000-2023). In addition, we explored the formation mechanisms of extreme cases in representative cities (such as Beijing, Delhi, Luanda, and Sucre). The results indicated consistent annual trends in BC surface mass concentrations and column mass densities. In the EC and IS, BC primarily originated from anthropogenic emissions, whereas in the SSA and CSA, biomass combustion predominated. Notable regional differences in anthropogenic BC emissions were observed, with all sectors in SSA exhibiting a markedly increasing trend. Seasonal patterns of BC were influenced by local meteorological conditions, emissions from anthropogenic sources, and biomass burning. In EC and IS, BC concentrations declined rapidly with decreasing air pressure, whereas in SSA and CSA, the decline was slower in the lower atmosphere, with a rapid decrease at an altitude of approximately 700 hPa. High-concentration BC events in the representative cities are linked to interactions between local emissions, adverse meteorological conditions, and atmospheric circulation. Our study quantified the long-term BC characteristics in major global source regions from multiple perspectives, providing valuable scientific insights for both regional and global atmospheric environmental research and management.

Impacts of Aging and Relative Humidity on Properties of Biomass Burning Smoke Particles

Quantifying changes in the properties of smoke aerosols under varying conditions is important for understanding the health and environmental impacts of exposure to smoke. Smoke composition, aerosol liquid water content, effective density (ρeff), and other properties can change significantly as smoke travels through areas under different ambient conditions and over time. During this study, we measured changes in smoke composition and physical properties due to oxidative aging and exposure to humidity. We found that smoke aging led to SOA formation and increases in ratios of organic carbon to elemental carbon. Aerosol liquid water content increased with increasing relative humidity (RH), and aged smoke took up more water than fresh smoke at all humidity levels, likely due to a combination of changes in aerosol surface polarity at low and medium RH and increases in surface area with aging at high RH. Growth factors ranged from 1.06 ± 0.08 for fresh smoke at low RH to 1.32 ± 0.08 for aged smoke at high RH. Oxidative aging and exposure to humidity led to increases in ρeff. For 100 nm particles, ρeff ranged from ∼1.2 for fresh smoke at low RH to ∼1.6 for aged smoke at high RH. Results from these experiments suggest that exposure to humidity leads to smoke restructuring and compaction and/or changes in surface chemistry.

PM2.5 pollution exceeding Indian standard over a semi-urban region at eastern IGP: Chemistry, meteorological impact, and long-range transport

A year-long study (January-December 2019) on the chemical characterization and meteorological impact on PM2.5 was conducted over a semi-urban station, Shyamnagar, in the easternmost part of the Indo-Gangetic Plains (IGP). PM2.5 concentrations (Mean = 81.69 ± 66.27 μgm-3; 7.10-272.74 μgm-3), the total carbonaceous aerosols (TCA) (Mean = 22.85 ± 24.95 μgm-3; 0.77-102.97 μgm-3) along with differential carbonaceous components like organic carbon (OC) (Mean = 11.28 ± 12.48 μgm-3; 0.48-53.01 μgm-3) and elemental carbon (EC) (Mean = 4.83 ± 5.28 μgm-3; 0.1-22.13 μgm-3) exhibited prominent seasonal variability with the highest concentrations during winter, followed by post-monsoon, pre-monsoon and lowest during monsoon. A similar seasonal variation was observed for the total water-soluble ionic species (Mean = 31.91 ± 20.12 μgm-3; 0.1-126.73 μgm-3). We observed that under the least favorable conditions (low ventilation coefficient), high PM2.5 pollution (exceeding Indian standard) was associated with a high increase in secondary components of PM2.5. Eastern, central and western parts of IGP, as well as Nepal, were the major long-distant source regions whereas the northern part of West Bengal and parts of Bangladesh were the major regional source region for high PM2.5 pollution over Shyamnagar. The ratios like char-EC/soot-EC, non-sea-K+/EC and non-sea-SO42-/EC strongly indicated the dominance of fossil fuel burning over biomass burning. Compared with other studies, we observed that the PM2.5 pollution over this semi-urban region was comparable (and even higher in some cases) with other parts of IGP. The high exceedance of PM2.5 over the Indian standard in Shyamnagar strongly demands an immediate initiation of systematic and regular based air pollution monitoring over semi-urban/non-urban regions in India, especially IGP, in addition to the polluted cities.

Suppression of the phenolic SOA formation in the presence of electrolytic inorganic seed

Phenolic compounds are largely attributed to wildfire gases and rapidly react with atmospheric oxidants to form persistent phenoxy free radicals, which influence atmospheric chemistry and secondary organic aerosol (SOA) formation. In this study, phenol or o-cresol was photochemically oxidized under various conditions (NO_x levels, humidity, and seed conditions) in an outdoor photochemical reactor. Unexpectedly, SOA growth of both phenols was suppressed in the presence of salted aqueous aerosol compared to non-seed SOA. This discovery is different from the typical SOA formation of aromatic or biogenic hydrocarbons, which show noticeably higher SOA yields via organic aqueous reactions. Phenol, o-cresol, and their phenolic products (e.g., catechols) are absorbed in aqueous aerosol and form phenoxy radicals via heterogeneous reactions under sunlight. The resulting phenoxy radicals are redistributed between the gas and particle phases. Gaseous phenoxy radicals quickly react with ozone to form phenyl peroxide radicals and regenerated through a NO_x cycle to retard phenol oxidation and SOA formation. The explicit oxidation mechanisms of phenol or o-cresol in the absence of aqueous phase were derived including the Master Chemical Mechanism (MCM v3.3.1) and the path for peroxy radical adducts originating from the addition of an OH radical to phenols to form low volatility products (e.g., multi-hydroxy aromatics). The resulting gas mechanisms of phenol or o-cresol were, then, applied to the Unified Partitioning Aerosol Phase Reaction (UNIPAR) model to predict SOA formation via multiphase partitioning of organics and aerosol-phase oligomerization. The model well simulated chamber-generated phenolic SOA in absence of wet-inorganic seed, but significantly overestimated SOA mass in presence of wet seed. This study suggests that heterogeneous chemistry to form phenoxy radicals needs to be included to improve SOA prediction from phenols. The suppression of atmospheric oxidation due to phenoxy radicals in wet inorganic aerosol can explain the low SOA formation during wildfire episodes.

Understanding the Evolution of Smoke Mass Extinction Efficiency Using Field Campaign Measurements

Aerosol mass extinction efficiency (MEE) is a key aerosol property used to connect aerosol optical properties with aerosol mass concentrations. Using measurements of smoke obtained during the Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign we find that mid-visible smoke MEE can change by a factor of 2-3 between fresh smoke (<2 hr old) and one-day-old smoke. While increases in aerosol size partially explain this trend, changes in the real part of the aerosol refractive index (real(n)) are necessary to provide closure assuming Mie theory. Real(n) estimates derived from multiple days of FIREX-AQ measurements increase with age (from 1.40 - 1.45 to 1.5-1.54 from fresh to one-day-old) and are found to be positively correlated with organic aerosol oxidation state and aerosol size, and negatively correlated with smoke volatility. Future laboratory, field, and modeling studies should focus on better understanding and parameterizing these relationships to fully represent smoke aging.

Contrasting wet deposition composition between three diverse islands and coastal North American sites

This study examined spatial variations of precipitation accumulation and chemistry for six sites located on the West and East Coasts of the U.S., and one site each on the islands of Hawaii, Bermuda, and Luzon of the Philippines (specifically Manila). The nine coastal sites ranged widely in both mean annual precipitation accumulation, ranging from 40 cm (Mauna Loa, Hawaii) to 275 cm (Washington), and in terms of monthly profiles. The three island sites represented the extremes of differences in terms of chemical profiles, with Bermuda having the highest overall ion concentrations driven mainly by sea salt, Hawaii having the highestSO 4 2 - mass fractions due to the nearby influence of volcanic SO2 emissions and mid-tropospheric transport of anthropogenic pollution, and Manila exhibiting the highest concentration of non-marine ions (NH 4 + non-sea salt [nss]SO 4 2 - , nss Ca2+,NO 3 - , nss K+, nss Na+, nss Mg2+) linked to anthropogenic, biomass burning, and crustal emissions. The Manila site exhibited the most variability in composition throughout the year due to shifting wind directions and having diverse regional and local pollutant sources. In contrast to the three island sites, the North American continental sites exhibited less variability in precipitation composition with sea salt being the most abundant constituent followed by some combination ofSO 4 2 - ,NO 3 - , andNH 4 + . The mean-annual pH values ranged from 4.88 (South Carolina) to 5.40 (central California) withNH 4 + exhibiting the highest neutralization factors for all sites except Bermuda where dust tracer species (nss Ca2+) exhibited enhanced values. The results of this study highlight the sensitivity of wet deposition chemistry to regional considerations, elevation, time of year, and atmospheric circulations.

On the relationship between cloud water composition and cloud droplet number concentration

Aerosol-cloud interactions are the largest source of uncertainty in quantifying anthropogenic radiative forcing. The large uncertainty is, in part, due to the difficulty of predicting cloud microphysical parameters, such as the cloud droplet number concentration (N d). Even though rigorous first-principle approaches exist to calculate N d, the cloud and aerosol research community also relies on empirical approaches such as relating N d to aerosol mass concentration. Here we analyze relationships between N d and cloud water chemical composition, in addition to the effect of environmental factors on the degree of the relationships. Warm, marine, stratocumulus clouds off the California coast were sampled throughout four summer campaigns between 2011 and 2016. A total of 385 cloud water samples were collected and analyzed for 80 chemical species. Single- and multispecies log-log linear regressions were performed to predict N d using chemical composition. Single-species regressions reveal that the species that best predicts N d is total sulfate (R adj 2 = 0.40 ). Multispecies regressions reveal that adding more species does not necessarily produce a better model, as six or more species yield regressions that are statistically insignificant. A commonality among the multispecies regressions that produce the highest correlation with N d was that most included sulfate (either total or non-sea-salt), an ocean emissions tracer (such as sodium), and an organic tracer (such as oxalate). Binning the data according to turbulence, smoke influence, and in-cloud height allowed for examination of the effect of these environmental factors on the composition-N d correlation. Accounting for turbulence, quantified as the standard deviation of vertical wind speed, showed that the correlation between N d with both total sulfate and sodium increased at higher turbulence conditions, consistent with turbulence promoting the mixing between ocean surface and cloud base. Considering the influence of smoke significantly improved the correlation with N d for two biomass burning tracer species in the study region, specifically oxalate and iron. When binning by in-cloud height, non-sea-salt sulfate and sodium correlated best with N d at cloud top, whereas iron and oxalate correlated best with N d at cloud base.

Effects of Biomass Burning on Stratocumulus Droplet Characteristics, Drizzle Rate, and Composition

This study reports on airborne measurements of stratocumulus cloud properties under varying degrees of influence from biomass burning (BB) plumes off the California coast. Data are reported from five total airborne campaigns based in Marina, California, with two of them including influence from wildfires in different areas along the coast of the western United States. The results indicate that subcloud cloud condensation nuclei number concentration and mass concentrations of important aerosol species (organics, sulfate, nitrate) were better correlated with cloud droplet number concentration (N d) as compared to respective above-cloud aerosol data. Given that the majority of BB particles resided above cloud tops, this is an important consideration for future work in the region as the data indicate that the subcloud BB particles likely were entrained from the free troposphere. Lower cloud condensation nuclei activation fractions were observed for BB-impacted clouds as compared to non-BB clouds due, at least partly, to less hygroscopic aerosols. Relationships between N d and either droplet effective radius or drizzle rate are preserved regardless of BB influence, indicative of how parameterizations can exhibit consistent skill for varying degrees of BB influence as long as N d is known. Lastly, the composition of both droplet residual particles and cloud water changed significantly when clouds were impacted by BB plumes, with differences observed for different fire sources stemming largely from effects of plume aging time and dust influence.

Aging Effects on Biomass Burning Aerosol Mass and Composition: A Critical Review of Field and Laboratory Studies

Biomass burning is a major source of atmospheric particulate matter (PM) with impacts on health, climate, and air quality. The particles and vapors within biomass burning plumes undergo chemical and physical aging as they are transported downwind. Field measurements of the evolution of PM with plume age range from net decreases to net increases, with most showing little to no change. In contrast, laboratory studies tend to show significant mass increases on average. On the other hand, similar effects of aging on the average PM composition (e.g., oxygen-to-carbon ratio) are reported for lab and field studies. Currently, there is no consensus on the mechanisms that lead to these observed similarities and differences. This review summarizes available observations of aging-related biomass burning aerosol mass concentrations and composition markers, and discusses four broad hypotheses to explain variability within and between field and laboratory campaigns: (1) variability in emissions and chemistry, (2) differences in dilution/entrainment, (3) losses in chambers and lines, and (4) differences in the timing of the initial measurement, the baseline from which changes are estimated. We conclude with a concise set of research needs for advancing our understanding of the aging of biomass burning aerosol.

Characterisation of emission from open-field burning of crop residue during harvesting period in north-west India

Open-field crop residue burning is one of the important sources of atmospheric pollution in north-west India during the harvesting period. In this work, we studied NO₂ and SO₂ concentrations and physical and chemical properties of aerosols from open-field combustion of rice and wheat residue. NO₂ and SO₂ were analysed using UV-spectrophotometer and ion chromatography (IC) respectively. The aerosol particles were analysed by scan electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX) for their physical dimension (size distribution) and elemental composition, and by IC for their ionic content. The measured concentrations of gases during burning showed rice straw burning spews more NO₂ and SO₂ than wheat straw burning. The calculated size of the particles ranged from 0.26 to 151.09 μm with high standard deviation. The median diameter of 1.64 μm (± 6.9) represented the central tendency of the particles emitted due to this combustion process. Comparative content analysis revealed that rice-borne particles are richer in Na, K, Al, Si and Zn, whereas, wheat-borne particles are more abundant in C, Mg, Fe, P and Cl. The results from IC and SEM-EDX evidenced the presence of fluoride, sulphate, carbonate, chloride, oxides and silicate compounds in particles. The emission of greenhouse gases (GHGs) and aerosols with this particle chemistry increases the atmospheric opacity through the absorption and scattering of incoming radiation at a significant amount in the UV-IR range causing high aerosol optical depth (AOD).

Wildfire-driven thunderstorms cause a volcano-like stratospheric injection of smoke

Intense heating by wildfires can generate deep, smoke-infused thunderstorms, known as pyrocumulonimbus (pyroCb), which can release a large quantity of smoke particles above jet aircraft cruising altitudes. Injections of pyroCb smoke into the lower stratosphere have gained increasing attention over the past 15 years due to the rapid proliferation of satellite remote sensing tools. Impacts from volcanic eruptions and other troposphere-to-stratosphere exchange processes on stratospheric radiative and chemical equilibrium are well recognized and monitored. However, the role of pyroCb smoke in the climate system has yet to be acknowledged. Here, we show that the mass of smoke aerosol particles injected into the lower stratosphere from five near-simultaneous intense pyroCbs occurring in western North America on 12 August 2017 was comparable to that of a moderate volcanic eruption, and an order of magnitude larger than previous benchmarks for extreme pyroCb activity. The resulting stratospheric plume encircled the Northern Hemisphere over several months. By characterizing this event, we conclude that pyroCb activity, considered as either large singular events, or a full fire season inventory, significantly perturb the lower stratosphere in a manner comparable with infrequent volcanic intrusions.

Radiative response of biomass-burning aerosols over an urban atmosphere in northern peninsular Southeast Asia

A large concentration of finer particulate matter (PM_2.5), the primary air-quality concern in northern peninsular Southeast Asia (PSEA), is believed to be closely related to large amounts of biomass burning (BB) particularly in the dry season. In order to quantitatively estimate the contributions of BB to aerosol radiative effects, we thoroughly investigated the physical, chemical, and optical properties of BB aerosols through the integration of ground-based measurements, satellite retrievals, and modelling tools during the Seven South East Asian Studies/Biomass-burning Aerosols & Stratocumulus Environment: Lifecycles & Interactions Experiment (7-SEAS/BASELInE) campaign in 2014. Clusters were made on the basis of measured BB tracers (Levoglucosan, nss-K⁺, and NO₃^-) to classify the degree of influence from BB over an urban atmosphere, viz., Chiang Mai (18.795°N, 98.957°E, 354m.s.l.), Thailand in northern PSEA. Cluster-wise contributions of BB to PM_2.5, organic carbon, and elemental carbon were found to be 54-79%, 42-79%, and 39-77%, respectively. Moreover, the cluster-wise aerosol optical index (aerosol optical depth at 500nm≈0.98-2.45), absorption (single scattering albedo ≈0.87-0.85; absorption aerosol optical depth ≈0.15-0.38 at 440nm; absorption Ångström exponent ≈1.43-1.57), and radiative impacts (atmospheric heating rate ≈1.4-3.6Kd^-1) displayed consistency with the degree of BB. PM_2.5 during Extreme BB (EBB) was ≈4 times higher than during Low BB (LBB), whereas this factor was ≈2.5 for the magnitude of radiative effects. Severe haze (visibility≈4km) due to substantial BB loadings (BB to PM_2.5≈79%) with favorable meteorology can significantly impact the local-to-regional air quality and the, daily life of local inhabitants as well as become a respiratory health threat. Additionally, such enhancements in atmospheric heating could potentially influence the regional hydrological cycle and crop productivity over Chiang Mai in northern PSEA.

Calibration of a high spectral resolution lidar using a Michelson interferometer, with data examples from ORACLES

The NASA Langley airborne second-generation High Spectral Resolution Lidar (HSRL-2) uses a density-tuned field-widened Michelson interferometer to implement the HSRL technique at 355 nm. The Michelson interferometer optically separates the received backscattered light between two channels, one of which is dominated by molecular backscattering, while the other contains most of the light backscattered by particles. This interferometer achieves high and stable contrast ratio, defined as the ratio of particulate backscatter signal received by the two channels. We show that a high and stable contrast ratio is critical for precise and accurate backscatter and extinction retrievals. Here, we present retrieval equations that take into account the incomplete separation of particulate and molecular backscatter in the measurement channels. We also show how the accuracy of the contrast ratio assessment propagates to error in the optical properties. For both backscattering and extinction, larger errors are produced by underestimates of the contrast ratio (compared to overestimates), more extreme aerosol loading, and-most critically-smaller true contrast ratios. We show example results from HSRL-2 aboard the NASA ER-2 aircraft from the 2016 ORACLES field campaign in the southeast Atlantic, off the coast of Africa, during the biomass burning season. We include a case study where smoke aerosol in two adjacent altitude layers showed opposite differences in extinction- and backscatter-related Ångström exponents and a reversal of the lidar ratio spectral dependence, signatures which are shown to be consistent with a relatively modest difference in smoke particle size.

Investigation on the hygroscopicity of oxalic acid and atmospherically relevant oxalate salts under sub- and supersaturated conditions

Oxalic acid (OxA) is an end product in the oxidation of many organic compounds, and therefore is ubiquitous in the atmosphere and is often the most abundant organic species in ambient aerosols. To better understand the hygroscopic properties of OxA under sub- and supersaturated conditions in the atmosphere, we investigated the hygroscopic growth and cloud condensation nuclei (CCN) activation ability of pure OxA and its salts using a hygroscopic tandem differential mobility analyzer (HTDMA) and cloud condensation nuclei counter (CCNC), respectively. OxA particles absorb water under >45% RH, suggesting that the initial phase state might be an amorphous solid. The measured hygroscopic growth factor (HGF) of OxA at 90% RH was 1.47. We found that the HGF of ammonium oxalate (NH4-Ox) was larger than that of OxA, whereas HGFs of sodium, calcium, and magnesium oxalates (Na-Ox, Ca-Ox, and Mg-Ox) were smaller than that of OxA particles. Potassium oxalate (K-Ox) behaved like a typical water-soluble inorganic salt, exhibiting deliquescence and efflorescence transitions at around 85% and 50% RH, respectively. Na-Ox exhibited strong activation capabilities among all the investigated salts, followed by NH4-Ox and K-Ox as inferred from the activation ratios (CCN/CN) against supersaturations (SS). On the other hand, Ca-Ox showed moderate activation ability and Mg-Ox showed poor CCN activation ability. We also observed significantly higher κCCN values compared to κHTDMA for pure OxA and its salts (NH4-Ox and Na-Ox), suggesting that the condensation of OxA into the aqueous phase occurs during water uptake. These findings improve the fundamental understanding of hygroscopic behaviors and phase states of oxalic acid and its salts under sub- and supersaturated conditions in the atmosphere and impacts of hygroscopicity on the direct and indirect effects of aerosol particles.

Measured Wavelength-Dependent Absorption Enhancement of Internally Mixed Black Carbon with Absorbing and Nonabsorbing Materials

Optical absorption spectra of laboratory generated aerosols consisting of black carbon (BC) internally mixed with nonabsorbing materials (ammonium sulfate, AS, and sodium chloride, NaCl) and BC with a weakly absorbing brown carbon surrogate derived from humic acid (HA) were measured across the visible to near-IR (550 to 840 nm). Spectra were measured in situ using a photoacoustic spectrometer and step-scanning a supercontinuum laser source with a tunable wavelength and bandwidth filter. BC had a mass-specific absorption cross section (MAC) of 7.89 ± 0.25 m(2) g(-1) at λ = 550 nm and an absorption Ångström exponent (AAE) of 1.03 ± 0.09 (2σ). For internally mixed BC, the ratio of BC mass to the total mass of the mixture was chosen as 0.13 to mimic particles observed in the terrestrial atmosphere. The manner in which BC mixed with each material was determined from transmission electron microscopy (TEM). AS/BC and HA/BC particles were fully internally mixed, and the BC was both internally and externally mixed for NaCl/BC particles. The AS/BC, NaCl/BC, and HA/BC particles had AAEs of 1.43 ± 0.05, 1.34 ± 0.06, and 1.91 ± 0.05, respectively. The observed absorption enhancement of mixed BC relative to the pure BC was wavelength dependent for AS/BC and decreased from 1.5 at λ = 550 nm with increasing wavelength while the NaCl/BC enhancement was essentially wavelength independent. For HA/BC, the enhancement ranged from 2 to 3 and was strongly wavelength dependent. Removal of the HA absorption contribution to enhancement revealed that the enhancement was ≈1.5 and independent of wavelength.

Long-term (2001-2012) observation of the modeled hygroscopic growth factor of remote marine TSP aerosols over the western North Pacific: impact of long-range transport of pollutants and their mixing states

In order to assess the seasonal and annual variability of long-range transported anthropogenic pollutants from East Asia and their effect on the hygroscopicity and precipitation process over the western North Pacific, we conducted long-term calculations of bulk hygroscopicity, g(90%)ZSR, based on the ZSR model using chemical composition data from 2001-2012 at Chichijima Island. We found that sea-salts (Na(+) and Cl(-)) are the major mass fraction (65%) of the total water-soluble matter followed by SO4(2-) (20%) and WSOM (6%). The seasonal variation of g(90%)ZSR was high in summer to autumn and low in winter to spring months, probably due to the influence of the long-range transport of anthropogenic SO4(2-), dust, and organics from East Asia and their interaction with sea-salts through heterogeneous reactions. On the other hand, annual variations of g(90%)ZSR showed a decrease from 2001 to 2006 and then an increase from 2007 to 2012. Interestingly, the annual variations in SO4(2-) mass fractions showed an increase from 2001 to 2006 and then a decrease from 2007 to 2012, demonstrating that SO4(2-) seriously suppresses the hygroscopic growth of sea-salt particles over the western North Pacific. This is further supported by the strong negative correlation between SO4(2-) and g(90%)ZSR. Based on the MODIS satellite data, the present study demonstrates that long-range transported anthropogenic pollutants from East Asia to the North Pacific can act as efficient cloud condensation nuclei but significantly suppress the precipitation by reducing the size of cloud droplets over the western North Pacific.

Evaluations of tropospheric aerosol properties simulated by the community earth system model with a sectional aerosol microphysics scheme

A sectional aerosol model (CARMA) has been developed and coupled with the Community Earth System Model (CESM1). Aerosol microphysics, radiative properties, and interactions with clouds are simulated in the size-resolving model. The model described here uses 20 particle size bins for each aerosol component including freshly nucleated sulfate particles, as well as mixed particles containing sulfate, primary organics, black carbon, dust, and sea salt. The model also includes five types of bulk secondary organic aerosols with four volatility bins. The overall cost of CESM1-CARMA is approximately ∼2.6 times as much computer time as the standard three-mode aerosol model in CESM1 (CESM1-MAM3) and twice as much computer time as the seven-mode aerosol model in CESM1 (CESM1-MAM7) using similar gas phase chemistry codes. Aerosol spatial-temporal distributions are simulated and compared with a large set of observations from satellites, ground-based measurements, and airborne field campaigns. Simulated annual average aerosol optical depths are lower than MODIS/MISR satellite observations and AERONET observations by ∼32%. This difference is within the uncertainty of the satellite observations. CESM1/CARMA reproduces sulfate aerosol mass within 8%, organic aerosol mass within 20%, and black carbon aerosol mass within 50% compared with a multiyear average of the IMPROVE/EPA data over United States, but differences vary considerably at individual locations. Other data sets show similar levels of comparison with model simulations. The model suggests that in addition to sulfate, organic aerosols also significantly contribute to aerosol mass in the tropical UTLS, which is consistent with limited data.

Brown haze types due to aerosol pollution at Hefei in the summer and fall

Brown haze episodes were evaluated at Hefei in the summer (June-August) and fall (September-November) seasons, and typical haze types were identified by air-mass back-trajectories and fire spot maps. Compared with clear weather conditions, larger median single scattering albedo values of 0.82 and 0.78 at 550 nm were obtained for the summer and fall haze episodes, respectively. Further, the observed lower scattering Angstrom exponents imply that more large particles than small particles dominated the haze plumes, which is in agreement with the profiles of size distribution. Particles during a haze episode in Hefei grow to a size such that the 0.10 limit for the backscattering ratio is reached, which may indicate that the aged aerosols promote the formation of haze episodes. Three typical haze types were identified: biomass burning, anthropogenic industrial and traffic emissions, and brown carbon. Less negative aerosol radiative forcing efficiencies of -12.7 and -10.9 W m(-2) in summer and fall were estimated, respectively, for haze impacted by biomass burning, which emphasizes an enhanced significance of biomass burning aerosols on climate forcing.

Forest fire smoke layers observed in the free troposphere over Portugal with a multiwavelength Raman lidar: optical and microphysical properties

Vertically resolved optical and microphysical properties of biomass burning aerosols, measured in 2011 with a multiwavelength Raman lidar, are presented. The transportation time, within 1-2 days (or less), pointed towards the presence of relatively fresh smoke particles over the site. Some strong layers aloft were observed with particle backscatter and extinction coefficients (at 355 nm) greater than 5 Mm⁻¹ sr⁻¹ and close to 300 Mm⁻¹, respectively. The particle intensive optical properties showed features different from the ones reported for aged smoke, but rather consistent with fresh smoke. The Ångström exponents were generally high, mainly above 1.4, indicating a dominating accumulation mode. Weak depolarization values, as shown by the small depolarization ratio of 5% or lower, were measured. Furthermore, the lidar ratio presented no clear wavelength dependency. The inversion of the lidar signals provided a set of microphysical properties including particle effective radius below 0.2 μm, which is less than values previously observed for aged smoke particles. Real and imaginary parts of refractive index of about 1.5-1.6 and 0.02i, respectively, were derived. The single scattering albedo was in the range between 0.85 and 0.93; these last two quantities indicate the nonnegligible absorbing characteristics of the observed particles.

Air quality impact and physicochemical aging of biomass burning aerosols during the 2007 San Diego wildfires

Intense wildfires burning >360000 acres in San Diego during October, 2007 provided a unique opportunity to study the impact of wildfires on local air quality and biomass burning aerosol (BBA) aging. The size-resolved mixing state of individual particles was measured in real-time with an aerosol time-of-flight mass spectrometer (ATOFMS) for 10 days after the fires commenced. Particle concentrations were high county-wide due to the wildfires; 84% of 120-400 nm particles by number were identified as BBA, with particles <400 nm contributing to mass concentrations dangerous to public health, up to 148 μg/m(3). Evidence of potassium salts heterogeneously reacting with inorganic acids was observed with continuous high temporal resolution for the first time. Ten distinct chemical types shown as BBA factors were identified through positive matrix factorization coupled to single particle analysis, including particles comprised of potassium chloride and organic nitrogen during the beginning of the wildfires, ammonium nitrate and amines after an increase of relative humidity, and sulfate dominated when the air mass back trajectories passed through the Los Angeles port region. Understanding BBA aging processes and quantifying the size-resolved mass and number concentrations are important in determining the overall impact of wildfires on air quality, health, and climate.

Characterizing the aging of biomass burning organic aerosol by use of mixing ratios: a meta-analysis of four regions

Characteristic organic aerosol (OA) emission ratios (ERs) and normalized excess mixing ratios (NEMRs) for biomass burning (BB) events have been calculated from ambient measurements recorded during four field campaigns. Normalized OA mass concentrations measured using Aerodyne Research Inc. quadrupole aerosol mass spectrometers (Q-AMS) reveal a systematic variation in average values between different geographical regions. For each region, a consistent, characteristic ratio is seemingly established when measurements are collated from plumes of all ages and origins. However, there is evidence of strong regional and local-scale variability between separate measurement periods throughout the tropical, subtropical, and boreal environments studied. ERs close to source typically exceed NEMRs in the far-field, despite apparent compositional change and increasing oxidation with age. The absence of any significant downwind mass enhancement suggests no regional net source of secondary organic aerosol (SOA) from atmospheric aging of BB sources, in contrast with the substantial levels of net SOA formation associated with urban sources. A consistent trend of moderately reduced ΔOA/ΔCO ratios with aging indicates a small net loss of OA, likely as a result of the evaporation of organic material from initial fire emissions. Variability in ERs close to source is shown to substantially exceed the magnitude of any changes between fresh and aged OA, emphasizing the importance of fuel and combustion conditions in determining OA loadings from biomass burning.

Case study of modeled aerosol optical properties during the SAFARI 2000 campaign

We present modeled aerosol optical properties (single scattering albedo, asymmetry parameter, and lidar ratio) in two layers with different aerosol loadings and particle sizes, observed during the Southern African Regional Science Initiative 2,000 (SAFARI 2,000) campaign. The optical properties were calculated from aerosol size distributions retrieved from aerosol layer optical thickness spectra, measured using the NASA Ames airborne tracking 14-channel sunphotometer (AATS-14) and the refractive index based on the available information on aerosol chemical composition. The study focuses on sensitivity of modeled optical properties in the 0.3-1.5 microm wavelength range to assumptions regarding the mixing scenario. We considered two models for the mixture of absorbing and nonabsorbing aerosol components commonly used to model optical properties of biomass burning aerosol: a layered sphere with absorbing core and nonabsorbing shell and the Maxwell-Garnett effective medium model. In addition, comparisons of modeled optical properties with the measurements are discussed. We also estimated the radiative effect of the difference in aerosol absorption implied by the large difference between the single scattering albedo values (approximately 0.1 at midvisible wavelengths) obtained from different measurement methods for the case with a high amount of biomass burning particles. For that purpose, the volume fraction of black carbon was varied to obtain a range of single scattering albedo values (0.81-0.91 at lambda=0.50 microm). The difference in absorption resulted in a significant difference in the instantaneous radiative forcing at the surface and the top of the atmosphere (TOA) and can result in a change of the sign of the aerosol forcing at TOA from negative to positive.