Self-healing materials with microvascular networks

Multivalency in healable supramolecular polymers: the effect of supramolecular cross-link density on the mechanical properties and healing of non-covalent polymer networks

Mechanical properties of healable supramolecular polymer blends correlate to non-covalent “crosslink density”.

Solvent-cast three-dimensional printing of multifunctional microsystems

The solvent-cast direct-write fabrication of microstructures is shown using a thermoplastic polymer solution ink. The method employs the robotically controlled microextrusion of a filament combined with a rapid solvent evaporation. Upon drying, the increased rigidity of the extruded filament enables the creation of complex freeform 3D shapes.

Room temperature self-healing thermoset based on the Diels-Alder reaction

A self-healing epoxy-amine thermoset based on the compatible functionalization of the thermoset and encapsulated healing agent has been successfully developed. Healing of the thermoset resulted from the reaction of furans in the thermoset and multimaleimides (MMIs) in the healing agent solution. The healing agent, MMI dissolved in phenyl acetate, was encapsulated using a urea-formaldehyde encapsulation method. Autonomic healing of the thermoset was achieved by incorporating microcapsules filled with the healing agent solution within a furan-functionalized epoxy-amine thermoset. The resulting self-healing thermoset recovered 71% of its initial load after fracture.

A strong and stretchable self-healing film with self-activated pressure sensitivity for potential artificial skin applications

Artificial skin, which mimics the functions of natural skin, will be very important in the future for robots used by humans in daily life. However, combining skin's pressure sensitivity and mechanical self-healing properties in a man-made material remains a challenging task. Here, we show that graphene and polymers can be integrated into a thin film which mimics both the mechanical self-healing and pressure sensitivity behavior of natural skin without any external power supply. Its ultimate strain and tensile strength are even two and ten times larger than the corresponding values of human skin, respectively. It also demonstrates highly stable sensitivity to a very light touch (0.02 kPa), even in bending or stretching states.

Nanovascularization of polymer matrix: generation of nanochannels and nanotubes by sacrificial electrospun fibers

Several methods for creating vascular structures, made of either discrete or interconnected channels have been developed. The currently employed methods enable the formation of channels with diameters in the millimetric and micrometric scale. However, the formation of an interconnected three-dimensional (3D) vasculature by using a rapid and scalable process is a challenge and largely limits the fields of applicability of these innovative materials. Here, we propose the use of electrospun nonwoven mats as sacrificial fibers to easily generate 3D macroscale vascularized composites containing interconnected networks with channels and tubes having submicrometric and nanometric diameters. The novel approach has the potentialities to give rise to a novel generation of composites potentially displaying new and enhanced functionalities thanks to the nanoscale features of the cavities.

25th anniversary article: reversible and adaptive functional supramolecular materials: "noncovalent interaction" matters

Supramolecular materials held together by noncovalent interactions, such as hydrogen bonding, host-guest interactions, and electrostatic interactions, have great potential in material science. The unique reversibility and adaptivity of noncovalent intreractions have brought about fascinating new functions that are not available by their covalent counterparts and have greatly enriched the realm of functional materials. This review article aims to highlight the very recent and important progresses in the area of functional supramoleuclar materials, focusing on adaptive mechanical materials, smart sensors with enhanced selectivity, soft luminescent and electronic nanomaterials, and biomimetic and biomedical materials with tailored structures and functions. We cannot write a complete account of all the interesting work in this area in one article, but we hope that it can in a way reflect the current situation and future trends in this prosperously developing area of functional supramolecular materials.

Robust self-healing hydrogels assisted by cross-linked nanofiber networks

Given increasing environmental and energy issues, mimicking nature to confer synthetic materials with self-healing property to expand their lifespan is highly desirable. Just like human skin recovers itself upon damage with the aid of nutrient-laden blood vascularization, designing smart materials with microvascular network to accelerate self-healing is workable but continues to be a challenge. Here we report a new strategy to prepare robust self-healing hydrogels assisted by a healing layer composed of electrospun cross-linked nanofiber networks containing redox agents. The hydrogels process high healing rate ranging from seconds to days and great mechanical strengths with storage modulus up to 0.1 MPa. More interestingly, when the healing layer is embedded into the crack of the hydrogel, accelerated self-healing is observed and the healing efficiency is about 80%. The healing layer encourages molecular diffusion as well as further cross-linking in the crack region of the hydrogel, responsible for enhanced healing efficiency.

25th anniversary article: Dynamic interfaces for responsive encapsulation systems

Encapsulation systems are urgently needed both as micrometer and sub-micrometer capsules for active chemicals' delivery, to encapsulate biological objects and capsules immobilized on surfaces for a wide variety of advanced applications. Methods for encapsulation, prolonged storage and controllable release are discussed in this review. Formation of stimuli responsive systems via layer-by-layer (LbL) assembly, as well as via mobile chemical bonding (hydrogen bonds, chemisorptions) and formation of special dynamic stoppers are presented. The most essential advances of the systems presented are multifunctionality and responsiveness to a multitude of stimuli - the possibility of formation of multi-modal systems. Specific examples of advanced applications - drug delivery, diagnostics, tissue engineering, lab-on-chip and organ-on-chip, bio-sensors, membranes, templates for synthesis, optical systems, and antifouling, self-healing materials and coatings - are provided. Finally, we try to outline emerging developments.

Self-Healing of Unentangled Polymer Networks with Reversible Bonds

Self-healing polymeric materials are systems that after damage can revert to their original state with full or partial recovery of mechanical strength. Using scaling theory we study a simple model of autonomic self-healing of unentangled polymer networks. In this model one of the two end monomers of each polymer chain is fixed in space mimicking dangling chains attachment to a polymer network, while the sticky monomer at the other end of each chain can form pairwise reversible bond with the sticky end of another chain. We study the reaction kinetics of reversible bonds in this simple model and analyze the different stages in the self-repair process. The formation of bridges and the recovery of the material strength across the fractured interface during the healing period occur appreciably faster after shorter waiting time, during which the fractured surfaces are kept apart. We observe the slowest formation of bridges for self-adhesion after bringing into contact two bare surfaces with equilibrium (very low) density of open stickers in comparison with self-healing. The primary role of anomalous diffusion in material self-repair for short waiting times is established, while at long waiting times the recovery of bonds across fractured interface is due to hopping diffusion of stickers between different bonded partners. Acceleration in bridge formation for self-healing compared to self-adhesion is due to excess non-equilibrium concentration of open stickers. Full recovery of reversible bonds across fractured interface (formation of bridges) occurs after appreciably longer time than the equilibration time of the concentration of reversible bonds in the bulk.

Plastic deformation, wrinkling, and recovery in microgel multilayers

Microgel multi-layer films assembled from anionic particles and linear polycation were prepared on elastomeric substrates and their self-healing properties studied. Dried films were imaged in situ during mechanical deformation and were determined to undergo plastic deformation in response to linear strain, leading to film buckling upon strain relaxation. Hydration leads to rapid reorganization of the film building blocks, permitting recovery of the film to the undamaged state. Additionally, films were determined to heal in the presence of high relative humidity environments, suggesting that film swelling and hydration is a major factor in the restoration of film integrity, and that full immersion in solvent is not required for healing. Films prepared from microgels with lower levels of acid content and/or polycation length, factors strongly connected to the charge density and presumably the connectivity of the film, also display self-healing characteristics.

Fabrication of nature-inspired microfluidic network for perfusable tissue constructs

A microreplication method is presented to transfer nature optimized vascular network of leaf venation into various synthetic matrixes. The biomaterial hydrogel with these microfluidic networks is proven to facilitate the growth of endothelial cells and simultaneously function as convection pathways to transport nutrients and oxygen in a pump-free bioreactor setup, which is crucial for the long-term viability of encapsulated cells.

Preorganized hydrogel: self-healing properties of supramolecular hydrogels formed by polymerization of host-guest-monomers that contain cyclodextrins and hydrophobic guest groups

Supramolecular hydrogels formed by a host-guest interaction show self-healing properties. The cube-shaped hydrogels with β-cyclodextrin and adamantane guest molecules mend after being broken. The hydrogels sufficiently heal to form a single gel, and the initial strength is restored. Although contact between a freshly cut and uncut surface does not mend the gels, two freshly cut surfaces selectively mend.

Fluorescent protein senses and reports mechanical damage in glass-fiber-reinforced polymer composites

Yellow fluorescent protein (YFP) is used as a mechanoresponsive layer at the fiber/resin interface in glass-fiber-reinforced composites. The protein loses its fluorescence when subjected to mechanical stress. Within the material, it reports interfacial shear debonding and barely visible impact damage by a transition from a fluorescent to a non-fluorescent state.

Ionic current devices-Recent progress in the merging of electronic, microfluidic, and biomimetic structures

We review the recent progress in the emerging area of devices and circuits operating on the basis of ionic currents. These devices operate at the intersection of electrochemistry, electronics, and microfluidics, and their potential applications are inspired by essential biological processes such as neural transmission. Ionic current rectification has been demonstrated in diode-like devices containing electrolyte solutions, hydrogel, or hydrated nanofilms. More complex functions have been realized in ionic current based transistors, solar cells, and switching memory devices. Microfluidic channels and networks-an intrinsic component of the ionic devices-could play the role of wires and circuits in conventional electronics.

Multichannel and repeatable self-healing of mechanical enhanced graphene-thermoplastic polyurethane composites

A novel self-healing material, which was fabricated using few-layered graphene (FG) and thermoplastic polyurethane (TPU) via a facile method, not only exhibits a mechanical enhanced property, but also can be repeatedly healed by various methods including infrared (IR) light, electricity and electromagnetic wave with healing efficiencies higher than 98%.

Silica/polymer double-walled hybrid nanotubes: synthesis and application as stimuli-responsive nanocontainers in self-healing coatings

We report the development of silica/polymer double-walled hybrid nanotubes, which consist of a hollow cavity, a porous silica inner wall, and a stimuli-responsive (pH, temperature, and redox) polymeric outer wall, as a novel nanocontainer system. The length, diameter, wall thickness, and aspect ratio of the hybrid nanotubes are precisely controlled in the range of 48-506 nm, 41-68 nm, 3-24 nm, and 1.2-7.6, respectively. The hybrid nanotubes loaded with active molecules exhibit morphology-dependent release and pH-, temperature-, redox-responsive release, which enable a wide range of applications from energy storage to drug delivery and self-healing coatings for metal corrosion protection.

Healable Supramolecular Polymeric Materials

This chapter details the design, synthesis and evaluation techniques required to produce healable supramolecular materials. Key developments in supramolecular polymer chemistry that laid down the design concepts necessary to produce responsive materials are summarized. Subsequently, select examples from the literature concerning the synthesis and analysis of healable materials containing hydrogen bonding, π−π stacking and metal–ligand interactions are evaluated. The last section describes the most recent efforts to produce healable gels for niche applications, including electrolytes and tissue engineering scaffolds. The chapter also describes the design criteria and production of nano-composite materials that exhibit dramatically increased strength compared to previous generations of supramolecular materials, whilst still retaining the key healing characteristics.

Optically healable polymers

Polymers that can easily be repaired after being damaged are attractive as this characteristic can improve the reliability, functionality, and lifetime of many products. In the last decade, researchers have thus developed new approaches to create stimuli-responsive polymer systems, which have the ability to autonomously heal or can be repaired upon exposure to an external stimulus. This review summarizes the current knowledge of optically healable or photo-healable polymers. The use of light as a stimulus for healing offers several attractive features, including the ability to deliver the stimulus locally, which opens up the possibility of healing the material under load, as well as the ability to tailor the wavelength of light to selectively address a specific component of the material, e.g. only the damaged parts. So far, two main classes of optically healable polymers have been explored, which are structurally dynamic polymers and mechanically activated reactive systems.

Self-healing hyperbranched poly(aroyltriazole)s

The research on self-healing polymers has been a hot topic. The encapsulated-monomer/catalyst, supramolecular self-assembly, and reversible or dynamic covalent bond formation are the prevailingly adopted strategies. The alternative of irreversible covalent bond formation is, however, to be further developed. In this contribution, self-healing hyperbranched poly(aroyltriazole)s of PI and PII sharing such mechanism were developed. The polymers were synthesized by our developed metal-free click polymerizations of bis(aroylacetylene)s and triazide. They are processible and have excellent film-forming ability. High quality homogeneous films and sticks free from defects could be obtained by casting. The scratched films could be self-repaired upon general heating. The cut films and sticks could be healed by stacking or pressing the halves together at elevated temperature. Thus, these hyperbranched polymers could find broad applications in diverse areas, and our design concept for self-healing materials should be generally applicable to other hyperbranched polymers with reactive groups on their peripheries.