Simple defined autoinduction medium for high-level recombinant protein production using T7-based Escherichia coli expression systems

Structural features determining thermal adaptation of esterases

The adaptation of microorganisms to extreme living temperatures requires the evolution of enzymes with a high catalytic efficiency under these conditions. Such extremophilic enzymes represent valuable tools to study the relationship between protein stability, dynamics and function. Nevertheless, the multiple effects of temperature on the structure and function of enzymes are still poorly understood at the molecular level. Our analysis of four homologous esterases isolated from bacteria living at temperatures ranging from 10°C to 70°C suggested an adaptation route for the modulation of protein thermal properties through the optimization of local flexibility at the protein surface. While the biochemical properties of the recombinant esterases are conserved, their thermal properties have evolved to resemble those of the respective bacterial habitats. Molecular dynamics simulations at temperatures around the optimal temperatures for enzyme catalysis revealed temperature-dependent flexibility of four surface-exposed loops. While the flexibility of some loops increased with raising the temperature and decreased with lowering the temperature, as expected for those loops contributing to the protein stability, other loops showed an increment of flexibility upon lowering and raising the temperature. Preserved flexibility in these regions seems to be important for proper enzyme function. The structural differences of these four loops, distant from the active site, are substantially larger than for the overall protein structure, indicating that amino acid exchanges within these loops occurred more frequently thereby allowing the bacteria to tune atomic interactions for different temperature requirements without interfering with the overall enzyme function.

Monitoring Scavenging Activity of Chemokine Receptors

Migration and positioning of cells is fundamental for complex functioning of multicellular organisms. During an immune response, cells are recruited from remote distances to a distinct location. Cells that are passively transported leave the circulation stimulated by locally produced signals and follow chemotactic cues to reach specific destinations. Such gradients are short (<150 μm) and require a source of production where the concentration is the highest and a sink in apposition where the attractant dissipates and the concentration is the lowest. Several straight forward methods exist to identify in vitro and in vivo cells producing chemoattractants. This can be achieved at the transcriptional level and by measuring secreted proteins. However, to demonstrate the activity of sinks in vitro and in vivo is more challenging. Cell-mediated dissipation of an attractant must be revealed by measuring its uptake and subsequent destruction. Elimination of chemoattractants such as chemokines can be monitored in vitro using radiolabeled ligands or more elegantly with fluorescent-labeled chemoattractants. The latter method can also be used in vivo and enables to monitor the process in real time using time-lapse video microscopy. In this chapter, we describe methods to produce fluorescently labeled chemokines either as fusion proteins secreted from insect cells or as recombinant bacterial proteins that can enzymatically be labeled. We discuss methods that were successfully used to demonstrate sink activities of scavenger receptors. Moreover, fluorescent chemokines can be used to noninvasively analyze receptor expression and activity in living cells.

A particular silent codon exchange in a recombinant gene greatly influences host cell metabolic activity

BACKGROUND

Recombinant protein production using Escherichia coli as expression host is highly efficient, however, it also induces strong host cell metabolic burden. Energy and biomass precursors are withdrawn from the host's metabolism as they are required for plasmid replication, heterologous gene expression and protein production. Rare codons in a heterologous gene may be a further drawback. This study aims to investigate the influence of particular silent codon exchanges within a heterologous gene on host cell metabolic activity. Silent mutations were introduced into the coding sequence of a model protein to introduce all synonymous arginine or leucine codons at two randomly defined positions, as well as substitutions leading to identical amino acid exchanges with different synonymous codons. The respective E. coli clones were compared during cultivation in a mineral autoinduction medium using specialized online and offline measuring techniques to quantitatively analyze effects on respiration, biomass and protein production, as well as on carbon source consumption, plasmid copy number, intracellular nucleobases and mRNA content of each clone.

RESULTS

Host stain metabolic burden correlates with recombinant protein production. Upon heterologous gene expression, tremendous differences in respiration, biomass and protein production were observed. According to their different respiration activity the E. coli clones could be classified into two groups, Type A and Type B. Type A clones tended to higher product formation, Type B clones showed stronger biomass formation. Whereas codon usage and intracellular nucleobases had no influence on the Type-A-Type-B-behavior, plasmid copy number, mRNA content and carbon source consumption strongly differed between the two groups.

CONCLUSIONS

Particular silent codon exchanges in a heterologous gene sequence led to differences in initial growth of Type A and Type B clones. Thus, the biomass concentration at the time point of induction varied. In consequence, not only plasmid copy number and expression levels differed between the two groups, but also the kinetics of lactose and glycerol consumption. Even though the underlying molecular mechanisms are not yet identified we observed the astonishing phenomenon that particular silent codon exchanges within a heterologous gene tremendously affect host cell metabolism and recombinant protein production. This could have great impact on codon optimization of heterologous genes, screening procedures for improved variants, and biotechnological protein production processes.

Enhancing recombinant protein solubility with ubiquitin-like small archeal modifying protein fusion partners

A variety of protein expression tags with different biochemical properties has been used to enhance the yield and solubility of recombinant proteins. Ubiquitin, SUMO (small ubiquitin-like modifier) and prokaryotic ubiquitin like MoaD (molybdopterin synthase, small subunit) fusion tags are getting more popular because of their small size. In this paper we report on the use of ubiquitin-like small archaeal modifier proteins (SAMPs) as fusion tags since they proved to increase expression yield, stability and solubility in our experiments. Equally important, they did not co-purify with proteins of the expression host and there was information that their specific JAB1/MPN/Mov34 metalloenzyme (JAMM) protease can recognize the C-terminal VSGG sequence when SAMPs fused, either branched or linearly to target proteins, and cleave it specifically. SAMPs and JAMM proteases from Haloferax volcanii, Thermoplasma acidophilum, Methanococcoides burtonii and Nitrosopumilus maritimus were selected, cloned, expressed heterologously in Escherichia coli and tested as fusion tags and cleaving proteases, respectively. Investigated SAMPs enhanced protein expression and solubility on a wide scale. T. acidophilum SAMPs Ta0895 and Ta01019 were the best performing tags and their effect was comparable to the widely used maltose binding protein (MBP) and N utilization substance protein A (NusA) tags. Moreover, H. volcanii SAMP Hvo_2619 contribution was mediocre, whereas M. burtonii Mbur_1415 could not be expressed. Out of four investigated JAMM proteases, only Hvo_2505 could cleave fusion tags. Interestingly, it was found active not only on its own partner substrate Hvo_2619, but it also cleaved off Ta0895.

Auto-inducing media for uniform isotope labeling of proteins with (15)N, (13)C and (2)H

Auto-inducing media for protein expression offer many advantages like robust reproducibility, high yields of soluble protein and much reduced workload. Here, an auto-inducing medium for uniform isotope labelling of proteins with (15)N, (13)C and/or (2)H in E. coli is presented. So far, auto-inducing media have not found widespread application in the NMR field, because of the prohibitively high cost of labeled lactose, which is an essential ingredient of such media. Here, we propose using lactose that is only selectively labeled on the glucose moiety. It can be synthesized from inexpensive and readily available substrates: labeled glucose and unlabeled activated galactose. With this approach, uniformly isotope labeled proteins were expressed in unattended auto-inducing cultures with incorporation of (13)C, (15)N of 96.6% and (2)H, (15)N of 98.8%. With the present protocol, the NMR community could profit from the many advantages that auto-inducing media offer.

Parallel use of shake flask and microtiter plate online measuring devices (RAMOS and BioLector) reduces the number of experiments in laboratory-scale stirred tank bioreactors

BACKGROUND

Conventional experiments in small scale are often performed in a 'Black Box' fashion, analyzing only the product concentration in the final sample. Online monitoring of relevant process characteristics and parameters such as substrate limitation, product inhibition and oxygen supply is lacking. Therefore, fully equipped laboratory-scale stirred tank bioreactors are hitherto required for detailed studies of new microbial systems. However, they are too spacious, laborious and expensive to be operated in larger number in parallel. Thus, the aim of this study is to present a new experimental approach to obtain dense quantitative process information by parallel use of two small-scale culture systems with online monitoring capabilities: Respiration Activity MOnitoring System (RAMOS) and the BioLector device.

RESULTS

The same 'mastermix' (medium plus microorganisms) was distributed to the different small-scale culture systems: 1) RAMOS device; 2) 48-well microtiter plate for BioLector device; and 3) separate shake flasks or microtiter plates for offline sampling. By adjusting the same maximum oxygen transfer capacity (OTRmax), the results from the RAMOS and BioLector online monitoring systems supplemented each other very well for all studied microbial systems (E. coli, G. oxydans, K. lactis) and culture conditions (oxygen limitation, diauxic growth, auto-induction, buffer effects).

CONCLUSIONS

The parallel use of RAMOS and BioLector devices is a suitable and fast approach to gain comprehensive quantitative data about growth and production behavior of the evaluated microorganisms. These acquired data largely reduce the necessary number of experiments in laboratory-scale stirred tank bioreactors for basic process development. Thus, much more quantitative information is obtained in parallel in shorter time.

Engineering the heterologous expression of lanthipeptides in Escherichia coli by multigene assembly

Lantibiotics are an important class of ribosomally synthesised peptide antibiotics with a remarkable pharmacological potential. Structural variants of lantibiotics generated by peptide engineering in vivo are an important aspect for improving the peptide's efficacy, stability and bioavailability as well as production titre, which severely impacts the potential exploitation in pharmaceutical applications. Therefore, expression systems are needed which allow for a robust genetic access for ample mutagenesis experiments. Based on previous heterologous expression of the two-component lanthipeptide lichenicidin (Bliα and Bliβ) in Escherichia coli BLic5, we now employ a multigene assembly strategy for recombinant lantibiotic peptide production in the Gram-negative host. Two E. coli high copy plasmids for separate and increased expression of a two-component lantibiotic were cloned and tested for expression. From these E. coli HP expression strains, an up to 100 times increased expression was found compared with Bacillus licheniformis I89 and E. coli BLic5. Total expression yields reach 4 mg L(-1) for Bliα and 6 mg L(-1) for Bliβ. The expression system developed in this study constitutes an important cornerstone for future in vivo peptide engineering studies and is of significance for potential applications aiming at higher production titres of ribosomally synthesised, post translationally modified peptides.

Soluble expression, purification, and characterization of active recombinant human tissue plasminogen activator by auto-induction in E. coli

Background

Human tissue plasminogen activator (tPA) belongs to the serine protease family. It converts plasminogen into plasmin and is used clinically to treat thrombosis. Human tPA is composed of 527 amino acids residues and contains 17 disulfide bonds. Escherichia coli has been used only rarely for the efficient production of recombinant tPA. However, the functional expression of full-length tPA that contains multiple disulfide bonds on an industrial scale remains challenging. Here, we describe the soluble expression and characterization of full-length tPA by auto-induction in E. coli.

Results

We achieved optimal levels of gene expression, minimized negative effects related to the production of heterologous proteins, and optimized cytoplasmic yields. Three different E. coli strains, BL21 (DE3), Rosetta, and Origami 2, could express tPA using an auto-induction mechanism. In addition, similar yields of recombinant protein were produced at temperatures of 33, 35, and 37°C. The E. coli strain origami 2 could increase disulfide bond formation in cytoplasmic tPA and produce purified soluble recombinant protein (~0.9 mg/l medium). The full-length tPA was monomeric in solution, and fibrin plate assays confirmed that the recombinant tPA displayed serine protease activity.

Conclusions

This is the first report that describes the heterologous expression of correctly folded active full-length tPA. This could provide valuable information for using prokaryotic auto-induction expression systems to produce tPA at industrial and pharmaceutical levels without in vitro refolding during the production step.

Expression of a collagen-binding domain fusion protein: effect of amino acid supplementation, inducer type, and culture conditions

Collagen binding domain fusion proteins are of significant importance because of their potential as therapeutic biomaterials. In this paper, we investigate the production of such therapeutic proteins via fermentation of Escherichia coli on both an undefined medium and a defined medium. Defined media with amino acid supplementation provided higher amounts of therapeutic protein than undefined media with no supplementation. Additionally, utilizing lactose instead of isopropyl-β-d-thio-galactoside (IPTG) for induction and extending batch time yielded higher amounts of the model therapeutic.

Exchange of single amino acids at different positions of a recombinant protein affects metabolic burden in Escherichia coli

Background

Escherichia coli is commonly used in academia and industry for expressing recombinant proteins because of its well-characterized molecular genetics and the availability of numerous expression vectors and strains. One important issue during recombinant protein production is the so-called ‘metabolic burden’: the material and energy normally reserved for microbial metabolism which is sapped from the bacterium to produce the recombinant protein. This material and energy drain harms biomass formation and modifies respiration. To the best of our knowledge, no research has investigated so far whether a single amino acid exchange in a recombinant protein affects the metabolic burden phenomenon. Thus, in this study, 15 E. coli BL21(DE3) clones expressing either the fusion tags, a recombinant wild type lipase, or 13 different lipase variants are investigated to quantitatively analyze the respective effects of single amino acid exchanges at different positions on respiration, biomass and protein production of each clone. Therefore, two small-scale online monitoring systems, namely a Respiration Activity MOnitoring System (RAMOS) and a microtiter plate based cultivation system (BioLector) are applied.

Results

Upon expression of all enzyme variants, strong variations were found in the Oxygen Transfer Rate (OTR), biomass and protein (lipase) production of the respective E. coli clones. Two distinct patterns of respiration behavior were observed and, so, the clones could be classified into two groups (Type A and B). Potential factors to explain these patterns were evaluated (e.g. plasmid copy number, inclusion body formation). However, no decisive factor could yet be identified. Five distinct cultivation phases could be determined from OTR curves which give real-time information about carbon source consumption, biomass and protein production. In general, it was found that the quantity of product increased with the duration of active respiration.

Conclusions

This work demonstrates that single amino acid exchanges in a recombinant protein influence the metabolic burden during protein production. The small-scale online monitoring devices RAMOS and BioLector enable the real-time detection of even smallest differences in respiration behavior, biomass and protein production in the E. coli clones investigated. Hence, this study underscores the importance of parallel online monitoring systems to unveil the relevance of single amino acid exchanges for the recombinant protein production.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-015-0191-y) contains supplementary material, which is available to authorized users.

HrpG and HrpV proteins from the Type III secretion system of Erwinia amylovora form a stable heterodimer

Bacterial type III secretion systems (T3SSs) are specialized multicomponent nanomachines that mediate the transport of proteins either to extracellular locations or directly into eukaryotic host cell cytoplasm. Erwinia amylovora, the main agent of rosaceous plants fireblight disease, employs an Hrp/Hrc1 T3SS to accomplish its pathogenesis. The regulatory network that controls the activation of this T3SS is largely unknown in E. amylovora. However, in Pseudomonas syringae pathovars, the HrpG/HrpV complex has been shown to directly regulate the activity of transcription factor HrpS and consequently the upregulation of the Hrp/Hrc1 T3SS related genes. In this work, we report the successful recombinant production and purification of a stable E. amylovora HrpG/HrpV complex, using pPROpET, a bicistronic expression vector. Furthermore, we present the first solution structure of this complex based on small-angle X-ray scattering data.

Smart sustainable bottle (SSB) system for E. coli based recombinant protein production

Background

Recombinant proteins are usually required in laboratories interested in the protein but not in the production process itself. Thus, technical equipment which is easy to handle and straight forward protein production procedures are of great benefit to those laboratories. Companies selling single use cultivation bags and bioreactors are trying to satisfy at least part of these needs. However, single-use systems can contribute to major costs which might be acceptable when “good manufacturing practices” are required but not acceptable for most laboratories facing tight funding.

Results

The assembly and application of a simple self-made “smart sustainable bottle” (SSB) system for E. coli based protein production is presented. The core of the SSB system is a 2-L glass bottle which is operated at constant temperature, air flow, and stirrer speed without measurement and control of pH and dissolved oxygen. Oxygen transfer capacities are in the range as in conventional bioreactors operated at intermediate aeration rates and by far exceed those found in conventional shaking flasks and disposable bioreactors. The SSB system was applied for the production of various recombinant proteins using T7-based expression systems and a defined autoinduction medium. The production performance regarding amount and solubility of proteins with robust and delicate properties was as good as in state-of-the-art stirred tank commercial bioreactors.

Conclusions

The SSB system represents a low cost protein production device applicable for easy, effective, and reproducible recombinant protein production.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-014-0153-9) contains supplementary material, which is available to authorized users.

The metabolic potential of Escherichia coli BL21 in defined and rich medium

BACKGROUND

The proteome reflects the available cellular machinery to deal with nutrients and environmental challenges. The most common E. coli strain BL21 growing in different, commonly employed media was evaluated using a detailed quantitative proteome analysis.

RESULTS

The presence of preformed biomass precursor molecules in rich media such as Luria Bertani supported rapid growth concomitant to acetate formation and apparently unbalanced abundances of central metabolic pathway enzymes, e.g. high levels of lower glycolytic pathway enzymes as well as pyruvate dehydrogenase, and low levels of TCA cycle and high levels of the acetate forming enzymes Pta and AckA. The proteome of cells growing exponentially in glucose-supplemented mineral salt medium was dominated by enzymes of amino acid synthesis pathways, contained more balanced abundances of central metabolic pathway enzymes, and a lower portion of ribosomal and other translational proteins. Entry into stationary phase led to a reconstruction of the bacterial proteome by increasing e.g. the portion of proteins required for scavenging rare nutrients and general cell protection. This proteomic reconstruction during entry into stationary phase was more noticeable in cells growing in rich medium as they have a greater reservoir of recyclable proteins from the translational machinery.

CONCLUSIONS

The proteomic comparison of cells growing exponentially in different media reflected the antagonistic and competitive regulation of central metabolic pathways through the global transcriptional regulators Cra, Crp, and ArcA. For example, the proteome of cells growing exponentially in rich medium was consistent with a dominating role of phosphorylated ArcA most likely a result from limitations in reoxidizing reduced quinones in the respiratory chain under these growth conditions. The proteomic alterations of exponentially growing cells into stationary phase cells were consistent with stringent-like and stationary phase responses and a dominating control through DksA-ppGpp and RpoS.

High-throughput strategies for penicillin G acylase production in rE. coli fed-batch cultivations

Background

Penicillin G acylase (PGA) is used industrially to catalyze the hydrolysis of penicillin G to obtain 6-aminopenicillanic acid. In Escherichia coli, the most-studied microorganism for PGA production, this enzyme accumulates in the periplasmic cell space, and temperature plays an important role in the correct synthesis of its subunits.

Results

This work investigates the influence of medium composition, cultivation strategy, and temperature on PGA production by recombinant E. coli cells. Shake flask cultures carried out using induction temperatures ranging from 18 to 28°C revealed that the specific enzyme activity achieved at 20°C (3000 IU gDCW^-1) was 6-fold higher than the value obtained at 28°C. Auto-induction and high cell density fed-batch bioreactor cultures were performed using the selected induction temperature, with both defined and complex media, and IPTG and lactose as inducers. Final biomass concentrations of 100 and 120 gDCW L^-1, and maximum enzyme productivities of 7800 and 5556 IU L^-1 h^-1, were achieved for high cell density cultures using complex and defined media, respectively.

Conclusions

To the best of our knowledge, the volumetric enzyme activity and productivity values achieved using the complex medium are the highest ever reported for PGA production using E. coli. Overall PGA recovery yields of 64 and 72% after purification were achieved for crude extracts obtained from cells cultivated in defined and complex media, respectively. The complex medium was the most cost-effective for PGA production, and could be used in both high cell density and straightforward auto-induction protocols.

Screening proteins for NMR suitability

NMR spectroscopy is a valuable tool in structural genomics. Identification of protein samples that are amenable to structure determination by NMR spectroscopy requires efficient screening. The preparation of multiple samples in parallel and screening by NMR is described. The method described is applicable to large structural genomics projects but can easily be scaled down for application to small structural biology projects. All the equipment used is commonly found in any NMR structural biology laboratory.

Mechanisms of allosteric activation and inhibition of the deoxyribonucleoside triphosphate triphosphohydrolase from Enterococcus faecalis

EF1143 from Enterococcus faecalis, a life-threatening pathogen that is resistant to common antibiotics, is a homo-tetrameric deoxyribonucleoside triphosphate (dNTP) triphosphohydrolase (dNTPase), converting dNTPs into the deoxyribonucleosides and triphosphate. The dNTPase activity of EF1143 is regulated by canonical dNTPs, which simultaneously act as substrates and activity modulators. Previous crystal structures of apo-EF1143 and the protein bound to both dGTP and dATP suggested allosteric regulation of its enzymatic activity by dGTP binding at four identical allosteric sites. However, whether and how other canonical dNTPs regulate the enzyme activity was not defined. Here, we present the crystal structure of EF1143 in complex with dGTP and dTTP. The new structure reveals that the tetrameric EF1143 contains four additional secondary allosteric sites adjacent to the previously identified dGTP-binding primary regulatory sites. Structural and enzyme kinetic studies indicate that dGTP binding to the first allosteric site, with nanomolar affinity, is a prerequisite for substrate docking and hydrolysis. Then, the presence of a particular dNTP in the second site either enhances or inhibits the dNTPase activity of EF1143. Our results provide the first mechanistic insight into dNTP-mediated regulation of dNTPase activity.

Optimization of auto-induction medium for G-CSF production by Escherichia coli using artificial neural networks coupled with genetic algorithm

Granulocyte colony-stimulating factor (G-CSF) is a cytokine widely used in cancer patients receiving high doses of chemotherapeutic drugs to prevent the chemotherapy-induced suppression of white blood cells. The production of recombinant G-CSF should be increased to meet the increasing market demand. This study aims to model and optimize the carbon source of auto-induction medium to enhance G-CSF production using artificial neural networks coupled with genetic algorithm. In this approach, artificial neural networks served as bioprocess modeling tools, and genetic algorithm (GA) was applied to optimize the established artificial neural network models. Two artificial neural network models were constructed: the back-propagation (BP) network and the radial basis function (RBF) network. The root mean square error, coefficient of determination, and standard error of prediction of the BP model were 0.0375, 0.959, and 8.49 %, respectively, whereas those of the RBF model were 0.0257, 0.980, and 5.82 %, respectively. These values indicated that the RBF model possessed higher fitness and prediction accuracy than the BP model. Under the optimized auto-induction medium, the predicted maximum G-CSF yield by the BP-GA approach was 71.66 %, whereas that by the RBF-GA approach was 75.17 %. These predicted values are in agreement with the experimental results, with 72.4 and 76.014 % for the BP-GA and RBF-GA models, respectively. These results suggest that RBF-GA is superior to BP-GA. The developed approach in this study may be helpful in modeling and optimizing other multivariable, non-linear, and time-variant bioprocesses.

Expression and purification of SfaX(II), a protein involved in regulating adhesion and motility genes in extraintestinal pathogenic Escherichia coli

Pathogenic Escherichia coli strains commonly harbor genes involved in formation of fimbriae, such as the sfa(II) fimbrial gene cluster found in uropathogenic and newborn meningitis isolates. The sfaX(II) gene, located at the distal end of the sfa(II) operon, was recently shown to play a role in controlling virulence-related gene expression in extraintestinal pathogenic E. coli (ExPEC). Until now, detailed characterization of the SfaX(II) protein has been hampered by difficulties in obtaining large quantities of soluble protein. By a rational modeling approach, we engineered a Cys70Ser mutation, which successfully improved solubility of the protein. Here, we present the expression, purification, and initial characterization of the recombinant SfaX(IIC70S) mutant. The protein was produced in E. coli BL21 (DE3) cells grown in autoinduction culture media. The plasmid vector harbored DNA encoding the SfaX(IIC70S) protein N-terminally fused with a six histidine (H6) sequence followed by a ZZ tag (a derivative of the Staphylococcus protein A) (H6-ZZ tag). The H6-ZZ tag was cleaved off with Tobacco Etch Virus (TEV) protease and the 166 amino acid full-length homo-dimeric protein was purified using affinity and size-exclusion chromatography. Electrophoretic mobility gel shift assays and atomic force microscopy demonstrated that the protein possesses DNA-binding properties, suggesting that the transcriptional regulatory activity of SfaX(II) can be mediated via direct binding to DNA.

Inclusion bodies of fuculose-1-phosphate aldolase as stable and reusable biocatalysts

Fuculose-1-phosphate aldolase (FucA) has been produced in Escherichia coli as active inclusion bodies (IBs) in batch cultures. The activity of insoluble FucA has been modulated by a proper selection of producing strain, culture media, and process conditions. In some cases, when an optimized defined medium was used, FucA IBs were more active (in terms of specific activity) than the soluble protein version obtained in the same process with a conventional defined medium, supporting the concept that solubility and conformational quality are independent protein parameters. FucA IBs have been tested as biocatalysts, either directly or immobilized into Lentikat beads, in an aldolic reaction between DHAP and (S)-Cbz-alaninal, obtaining product yields ranging from 65 to 76%. The production of an active aldolase as IBs, the possibility of tailoring IBs properties by both genetic and process approaches, and the reusability of IBs by further entrapment in appropriate matrices fully support the principle of using self-assembled enzymatic clusters as tunable mechanically stable and functional biocatalysts.