Chemical standards for ion mobility spectrometry: a review

Accurate and reproducible ion mobility measurements for chemical standard evaluation

Chemical standards are used to calibrate ion mobility spectrometers (IMS) for accurate and precise identification of target compounds. Research over the past 30 years has identified several positive and negative mode compounds that have been used as IMS standards. However, the IMS research community has not come to a consensus on any chemical compound(s) for use as a reference standard. Also, the reported K(0) values for the same compound analyzed on several IMS systems can be inconsistent. In many cases, mobility has not been correlated with a mass identification of an ion. The primary goal of this work was to provide mass-identified mobility (K(0)) values for standards. The results of this work were mass-identified K(0) values for positive and negative mode IMS chemical standards. The negative mode results of this study showed that TNT is a viable negative mode reference standard. New temperature-dependent K(0) values were found by characterizing drift gas temperature and water content; several examples were found of temperature-dependent changes for the ion species of several standards. The overall recommendation of this study is that proposed IMS standards should have temperature-dependent K(0) values quoted in the literature instead of using a single K(0) value for a compound.

Separation of different ion structures in atmospheric pressure photoionization-ion mobility spectrometry-mass spectrometry (APPI-IMS-MS)

This study demonstrates how positive ion atmospheric pressure photoionization-ion mobility spectrometry-mass spectrometry (APPI-IMS-MS) can be used to produce different ionic forms of an analyte and how these can be separated. When hexane:toluene (9:1) is used as a solvent, 2,6-di-tert-butylpyridine (2,6-DtBPyr) and 2,6-di-tert-4-methylpyridine (2,6-DtB-4-MPyr) efficiently produce radical cations [M](+*) and protonated [M + H](+) molecules, whereas, when the sample solvent is hexane, protonated molecules are mainly formed. Interestingly, radical cations drift slower in the drift tube than the protonated molecules. It was observed that an oxygen adduct ion, [M + O(2)](+*), which was clearly seen in the mass spectra for hexane:toluene (9:1) solutions, shares the same mobility with radical cations, [M](+*). Therefore, the observed mobility order is most likely explained by oxygen adduct formation, i.e., the radical cation forming a heavier adduct. For pyridine and 2-tert-butylpyridine, only protonated molecules could be efficiently formed in the conditions used. For 1- and 2-naphthol it was observed that in hexane the protonated molecule typically had a higher intensity than the radical cation, whereas in hexane:toluene (9:1) the radical cation [M](+*) typically had a higher intensity than the protonated molecule [M + H](+). Interestingly, the latter drifts slower than the radical cation [M](+*), which is the opposite of the drift pattern seen for 2,6-DtBPyr and 2,6-DtB-4-MPyr.

Fabrication and characterization of gelatin-based test materials for verification of trace contraband vapor detectors

This work describes a method to produce inexpensive and field deployable test materials that can be used to verify the performance of trace contraband vapor detection systems such as ion mobility spectrometers (IMS) currently deployed worldwide for explosives, narcotics, and chemical warfare agent (CWA) detection. Requirements for such field deployable test materials include long shelf life, portability, and low manufacturing costs. Reported here is a method for fabricating these test materials using encapsulation of high vapor pressure compounds, such as methyl salicylate (MS), into a gelatin matrix. Gelatin serves as a diffusion barrier allowing for controlled and sustained release of test vapors. Test materials were prepared by incorporating serial dilutions of MS into gelatin, which provide controlled analyte vapor release over 3 to 4 orders of magnitude of instrument response. The test materials are simple to prepare and have been shown to be stable for at least one year under controlled laboratory conditions.

Laserspray ionization (LSI) ion mobility spectrometry (IMS) mass spectrometry

A simple device is described for desolvation of highly charged matrix/analyte clusters produced by laser ablation leading to multiply charged ions that are analyzed by ion mobility spectrometry-mass spectrometry. Thus, for example, highly charged ions of ubiquitin and lysozyme are cleanly separated in the gas phase according to size and mass (shape and molecular weight) as well as charge using Tri-Wave ion mobility technology coupled to mass spectrometry. This contribution confirms the mechanistic argument that desolvation is necessary to produce multiply charged matrix-assisted laser desorption/ionization (MALDI) ions and points to how these ions can be routinely formed on any atmospheric pressure mass spectrometer.

Alignment of retention time obtained from multicapillary column gas chromatography used for VOC analysis with ion mobility spectrometry

Multicapillary column (MCC) ion mobility spectrometers (IMS) are increasingly in demand for medical diagnosis, biological applications and process control. In a MCC-IMS, volatile compounds are differentiated by specific retention time and ion mobility when rapid preseparation techniques are applied, e.g. for the analysis of complex and humid samples. Therefore, high accuracy in the determination of both parameters is required for reliable identification of the signals. The retention time in the MCC is the subject of the present investigation because, for such columns, small deviations in temperature and flow velocity may cause significant changes in retention time. Therefore, a universal correction procedure would be a helpful tool to increase the accuracy of the data obtained from a gas-chromatographic preseparation. Although the effect of the carrier gas flow velocity and temperature on retention time is not linear, it could be demonstrated that a linear alignment can compensate for the changes in retention time due to common minor deviations of both the carrier gas flow velocity and the column temperature around the MCC-IMS standard operation conditions. Therefore, an effective linear alignment procedure for the correction of those deviations has been developed from the analyses of defined gas mixtures under various experimental conditions. This procedure was then applied to data sets generated from real breath analyses obtained in clinical studies using different instruments at different measuring sites for validation. The variation in the retention time of known signals, especially for compounds with higher retention times, was significantly improved. The alignment of the retention time—an indispensable procedure to achieve a more precise identification of analytes—using the proposed method reduces the random error caused by small accidental deviations in column temperature and flow velocity significantly.

Sterically hindered phenols in negative ion mobility spectrometry-mass spectrometry

Negative corona discharge atmospheric pressure chemical ionization (APCI) was used to investigate phenols with varying numbers of tert-butyl groups using ion mobility spectrometry-mass spectrometry (IMS-MS). The main characteristic ion observed for all the phenolic compounds was the deprotonated molecule [M-H](-). 2-tert-Butylphenol showed one main mobility peak in the mass-selected mobility spectrum of the [M-H](-) ion measured under nitrogen atmosphere. When air was used as a nebulizer gas an oxygen addition ion was seen in the mass spectrum and, interestingly, this new species [M-H+O](-) had a shorter drift time than the lighter [M-H](-) ion. Other phenolic compounds primarily produced two IMS peaks in the mass-selected mobility spectra measured using the [M-H](-) ion. It was also observed that two isomeric compounds, 2,4-di-tert-butylphenol and 2,6-di-tert-butylphenol, could be separated with IMS. In addition, mobilities of various characteristic ions of 2,4,6-trinitrotoluene were measured, since this compound was previously used as a mobility standard. The possibility of using phenolic compounds as mobility standards is also discussed.