Conformational changes of lysozyme refolding intermediates and implications for aggregation and renaturation

Diffusible amyloid oligomers trigger systemic amyloidosis in mice

AA (amyloid protein A) amyloidosis in mice is markedly accelerated when the animals are given, in addition to an inflammatory stimulus, an intravenous injection of protein extracted from AA-laden mouse tissue. Previous findings affirm that AA fibrils can enhance the in vivo amyloidogenic process by a nucleation seeding mechanism. Accumulating evidence suggests that globular aggregates rather than fibrils are the toxic entities responsible for cell death. In the present study we report on structural and morphological features of AEF (amyloid-enhancing factor), a compound extracted and partially purified from amyloid-laden spleen. Surprisingly, the chief amyloidogenic material identified in the active AEF was diffusible globular oligomers. This partially purified active extract triggered amyloid deposition in vital organs when injected intravenously into mice. This implies that such a phenomenon could have been inflicted through the nucleation seeding potential of toxic oligomers in association with altered cytokine induction. In the present study we report an apparent relationship between altered cytokine expression and AA accumulation in systemically inflamed tissues. The prevalence of serum AA monomers and proteolytic oligomers in spleen AEF is consistent to suggest that extrahepatic serum AA processing might lead to local accumulation of amyloidogenic proteins at the serum AA production site.

Spectroscopic studies on the interaction between CdTe nanoparticles and lysozyme

Nanoparticles of cadmium telluride (CdTe) coated with thioglycolic acid (TGA) were prepared in the water phase. The interaction between CdTe nanoparticles (NPs) and lysozyme (Lyz) was investigated by fluorescence and circular dichroism (CD) spectroscopy at pH 7.40. It was proved that the fluorescence quenching of Lyz by CdTe NPs was mainly a result of the formation of CdTe-Lyz complex. By the fluorescence quenching results, the Stern-Volmer quenching constant (K(SV)), binding constant (Ka) and binding sites (n) were calculated. The binding distance (r) between Lyz (the donor) and CdTe NPs (the acceptor) was obtained according to fluorescence resonance energy transfer (FRET). Gradual addition of CdTe NPs to the solution of Lyz led to a marked increase in fluorescence polarization (P) of Lyz, which indicated that CdTe NPs were located in a restricted environment of Lyz. The effect of CdTe NPs on the conformation of Lyz has been analyzed by means of synchronous fluorescence spectra and CD spectra, which provided the evidence that the secondary structure of Lyz has been changed by the interaction of CdTe NPs with Lyz.

Self-assembling peptides: sequence, secondary structure in solution and film formation

Peptides of alternating charge and hydrophobic amino acids have a tendency to adopt unusually stable beta-sheet structures that can form insoluble macroscopic aggregates under physiological conditions. In this study, analogues of a well-known self-assembling peptide, characterized by the same polar/nonpolar periodicity but with different residues, were designed to study the relationship between sequence, conformation in solution and film-forming capacity in saline solution. Peptide conformation, evaluated by circular dichroism, correlated with film forming capacity observed by inverted optical microscopy after addition of saline solution and subsequent drying. We found that polar/nonpolar periodicity of several analogues is not criterion enough to induce beta-sheet and thus film formation and that conformations different from beta-sheet also allow self-assemblage. Furthermore, addition of the short adhesive sequence RGD to a known self-assembling sequence was shown to not prevent the self-assembling process. This finding might prove useful for the design of biomimetic scaffolds.

Study on the interaction of puerarin with lysozyme by spectroscopic methods

The interaction between lysozyme (LYSO) and puerarin has been studied at three temperatures (294, 302 and 310K) through/using fluorescence spectroscopy and circular dichroism (CD). The LYSO fluorescence was quenched by the binding of puerarin to LYSO. The binding constants and the number of binding sites can be calculated from the data obtained from fluorescence quenching experiments. According to the van't Hoff equation, the standard enthalpy change (DeltaH degrees ) and standard entropy change (DeltaS degrees ) for the reaction were calculated to be 17.47kJ/mol and 163.5J/molK. It indicated that the hydrophobic interactions play a main role in the binding of puerarin to LYSO. In addition, the distance between puerarin (acceptor) and tryptophan residues of LYSO (donor) was estimated to be 1.47nm on the basis of fluorescence energy transfer. The changes of LYSO secondary structure in the presence of puerarin were observed from CD spectroscopy.

Hen egg white lysozyme fibrillation: a deep-UV resonance Raman spectroscopic study

Amyloid fibrils are associated with numerous degenerative diseases. The molecular mechanism of the structural transformation of native protein to the highly ordered cross-beta structure, the key feature of amyloid fibrils, is under active investigation. Conventional biophysical methods have limited application in addressing the problem because of the heterogeneous nature of the system. In this study, we demonstrated that deep-UV resonance Raman (DUVRR) spectroscopy in combination with circular dichroism (CD) and intrinsic tryptophan fluorescence allowed for quantitative characterization of protein structural evolution at all stages of hen egg white lysozyme fibrillation in vitro. DUVRR spectroscopy was found to be complimentary to the far-UV CD because it is (i) more sensitive to beta -sheet than to alpha -helix, and (ii) capable of characterizing quantitatively inhomogeneous and highly light-scattering samples. In addition, phenylalanine, a natural DUVRR spectroscopic biomarker of protein structural rearrangements, exhibited substantial changes in the Raman cross section of the 1000-cm(-1) band at various stages of fibrillation.

The first step of hen egg white lysozyme fibrillation, irreversible partial unfolding, is a two-state transition

Amyloid fibril depositions are associated with many neurodegenerative diseases as well as amyloidosis. The detailed molecular mechanism of fibrillation is still far from complete understanding. In our previous study of in vitro fibrillation of hen egg white lysozyme, an irreversible partially unfolded intermediate was characterized. A similarity of unfolding kinetics found for the secondary and tertiary structure of lysozyme using deep UV resonance Raman (DUVRR) and tryptophan fluorescence spectroscopy leads to a hypothesis that the unfolding might be a two-state transition. In this study, chemometric analysis, including abstract factor analysis (AFA), target factor analysis (TFA), evolving factor analysis (EFA), multivariate curve resolution-alternating least squares (ALS), and genetic algorithm, was employed to verify that only two principal components contribute to the DUVRR and fluorescence spectra of soluble fraction of lysozyme during the fibrillation process. However, a definite conclusion on the number of conformers cannot be made based solely on the above spectroscopic data although chemometric analysis suggested the existence of two principal components. Therefore, electrospray ionization mass spectrometry (ESI-MS) was also utilized to address the hypothesis. The protein ion charge state distribution (CSD) envelopes of the incubated lysozyme were well fitted with two principal components. Based on the above analysis, the partial unfolding of lysozyme during in vitro fibrillation was characterized quantitatively and proven to be a two-state transition. The combination of ESI-MS and Raman and fluorescence spectroscopies with advanced statistical analysis was demonstrated to be a powerful methodology for studying protein structural transformations.

Control of aggregation in protein refolding: Cooperative effects of artificial chaperone and cold temperature

Refolding of GuHCl-denatured recombinant-human growth hormone (r-hGH) was investigated in both dilution additive and artificial chaperone assisted modes. In both techniques, it was found that CTAB is a better additive (in dilution mode) or a capturing agent (in artificial chaperone method). Neither of the two techniques was capable of complete inhibition of aggregates formed during refolding process. In dilution, using CTAB or alpha-cyclodextrin (alpha-CD) as two different additives, the aggregation was inhibited by almost 55%. However, the extent of inhibition raised to almost 82% in artificial chaperone assisted mode using CTAB as the capturing and alpha-CD as the stripping agents. Maximum inhibition of aggregation (up to 97%) was obtained when the entire process of refolding was done at 4 degrees C. However, under this temperature program, the far-UV CD and intrinsic fluorescence spectra of the refolded samples were not superimposable on their respective native spectra. The spectra superimposibilities were obtained when the refolding process was achieved under a well worked out temperature program: incubation of the sample for 3 min at 4 degrees C after initiation of the stripping step followed by overnight incubation at 22 degrees C. Based on these data, it is expected that higher activity recovery yields of recombinant proteins, particularly at relatively higher protein concentrations, could be achieved by getting a better molecular understanding of major factors responsive for aggregation and refolding pathways.

A surfactant copolymer facilitates functional recovery of heat-denatured lysozyme

The triblock copolymer poloxamer 188 is a non-cytotoxic, nonionic surfactant with both hydrophobic and hydrophilic domains. We show that P188 is able to facilitate the recovery of catalytic activity of heat-denatured lysozyme in dilute solution at low molar ratios of P188:enzyme. Heat-denatured enzyme retained 55% of native activity. After treatment with P188, the enzyme's activity was 85% of native. Because of the low molar ratios used and the non-cytotoxic nature of the compound, P188 may be of potential use in burn therapy.

Comparison of the characterization on binding of alpinetin and cardamonin to lysozyme by spectroscopic methods

Studies on the binding affinity of protein to the active components of herbs are novel in biochemistry and are valuable for the information about speciation of drugs and exchange in biological systems. Alpinetin and cardamonin, two of the main constituents from the seeds of Alpinia katsumadai Hayata, have been used in traditional herbs as antibacterial, anti-inflammatory, and other important therapeutic activities of significant potency and low systemic toxicity. The interactions between two flavonoids analogs and lysozyme have been studied for the first time by spectroscopic method including Fourier transform infrared (FT-IR) spectroscopy, circular dichroism (CD) and UV-absorption spectroscopy in combination with Fluorescence quenching study. Both molecules showed high affinities to lysozyme under the experimental condition with drug concentrations from 3.33 x 10(-6) to 2.67 x 10(-5)molL(-1) for alpinetin and 1.67 x 10(-6) to 13.33 x 10(-6)molL(-1) for cardamonin. The alterations of protein secondary structure in the presence of drugs in aqueous solution were quantitatively estimated by the evidences from CD and FT-IR spectroscopy. The thermodynamic parameters obtained and the results of spectroscopic measurements suggest that hydrophobic and electrostatic interactions are the predominant intermolecular forces stabilizing two coordination compounds. The quenching mechanism and the number of binding site (n approximately 1) were obtained by fluorescence titration data. The efficiency of energy transfer provided the binding distances of 4.04 and 5.90 nm for alpinetin-LYSO and cardamonin-LYSO systems, respectively.

Stabilization of Lysozyme Mass Extracted From Lotrafilcon Silicone Hydrogel Contact Lenses

PURPOSE

Lysozyme deposits extracted from lotrafilcon silicone hydrogel (SH) contact lens materials demonstrate a loss in total mass as a function of storage time when assessed by Western blotting. This loss represents a potential source of error when quantifying total lysozyme deposition on SH lenses. The purpose of this study was to devise a method whereby lysozyme mass would be preserved over time to allow for its accurate quantitation after its removal from SH lenses.

METHODS

Lysozyme deposits from 12 human worn lotrafilcon lenses were extracted using a 50:50 mixture of 0.2% trifluoroacetic acid and acetonitrile. Extracts were lyophilized to dryness, then resuspended in either reconstitution buffer (10 mM Tris-HCl, 1 mM EDTA) or modified reconstitution buffer (reconstitution buffer + 0.9% saline). BIOSTAB Biomolecule Storage Solution (Sigma-Aldrich) was added to one half of the samples from each buffer group. One microliter of each of the samples was immediately subjected to sodium dodecyl sulfate polyacrylamide gel electrophoresis and Western blotting, whereas the remaining volume was aliquoted and stored at -20 degrees C or -70 degrees C and subjected to the same procedures after 48 h of storage. Comparison of lysozyme band intensity in stored vs. fresh samples enabled calculation of percentage mass loss of lysozyme.

RESULTS

Samples stored at -20 degrees C in reconstitution buffer with no BIOSTAB demonstrated a 33% loss in mass over 48 h of storage. Identical samples stored at -70 degrees C in modified reconstitution buffer with BIOSTAB added demonstrated <1% loss in mass. Statistical analysis indicated that buffer composition (p < 0.001), storage temperature (p = 0.04), and addition of BIOSTAB (p < 0.001) were all important in controlling loss of mass over time.

CONCLUSION

We have optimized a procedure whereby the extracted mass of lysozyme deposits found on lotrafilcon SH lenses can be preserved, thus enabling accurate quantitation after extraction and resuspension.