Effects of different moisture contents on the structure and properties of corn starch during extrusion

Structure Characterization, In Vitro Antioxidant and Anti-Tumor Activity of Sulfated Polysaccharide from Siraitia grosvenorii

From Siraitia grosvenorii, a natural polysaccharide named SGP-1 was discovered, and its purity was determined to be 96.83%. Its structure is a glucan with 4-, 6- and 4,6-linked glucose units. In this paper, the sulfated derivative S-SGP of SGP-1 was prepared by the chlorosulfonic acid method. The sulfated derivatives were analyzed by Fourier transform infrared spectroscopy (FT-IR), gel permeation chromatography (GPC), and scanning electron microscopy (SEM). The degree of substitution (DS) of the polysaccharide is 0.62, and the weight average molecular weight (Mw) is 1.34 × 10⁴ Da. While retaining the morphological characteristics of polysaccharides, S-SGP appeared a large number of spherical structures and strong intermolecular forces. The in vitro activity study of S-SGP showed that the sulfated derivatives had the ability to scavenge DPPH radicals, hydroxyl radicals and superoxide anions, and the scavenging power tended to increase with the increase in polysaccharide concentration. It can inhibit the growth of human hepatoma cells (HepG2), human breast cancer cells (MDA-MB-231) and human non-small cell lung cancer cells (A549) in vitro. In addition, the treatment of A549 cells with sulfuric acid derivatives can decrease the mitochondrial membrane potential, induce apoptosis, and alter the expression of apoptosis-related mRNA and protein.

Characterization of starch extracted from seeds of Cycas revoluta

Introduction

Starch is major component in the big seeds of Cycas revoluta, however the characteristics of Cycas revoluta remain unknown.

Methods

In this study, the physicochemical and structural properties of two starch samples extracted from Cycad revoluta seeds were systematically investigated, using various techniques.

Results

The amylose contents of the two samples were 34.3 % and 35.5%, respectively. The spherical-truncated shaped starch granules possessed A-type crystallinity, and had an average diameter less than 15 μm. Compared to most commonly consumed cereal and potato starch, Cycad revoluta starch showed distinctive characteristics. For physicochemical properties, in the process of gelatinization, the Cycad revoluta starch showed similar viscosity profile to starches of some potato varieties, but Cycad revoluta starch had higher gelatinization temperature. Upon cooling, Cycad revoluta starch formed harder gels than rice starch. For structure, the molecular weight (indexed by Mw, Mn and Rz values), branching degree and the branch chain length distribution were determined.

Discussion

The results suggested that Cycad revoluta starch were different in structure from the main-stream starches. Notable differences in some starch traits between the two samples were recorded, which could be attributed to environmental factors. In general, this study provides useful information on the utilization of Cycad revoluta starch in both food and non-food industries.

Effects of different rapid cooling temperatures and annealing on functional properties of starch straws after thermoplastic extrusion

To improve the performance of starch straws in rapidly cooling and annealing procedure of thermoplastic extrusion, control straw was prepared through slowly cooling at 25 °C, and starch straw was prepared through regulating different rapid cooling temperatures including 20 °C, 5 °C, -10 °C and -20 °C. The results indicated that control straw exhibited a homogeneous state, while starch straws treated by rapid cooling displayed like a wash-board structure. Compared to control straw, the ratio of the absorption peak intensity of 1047 and 1022 cm^-1 increased from 1.050 to 1.455 as cooling temperatures decreased from 25 °C to -20 °C, indicating short-range order of the double helix structure significantly enhanced. The relative crystallinities of starch straws increased from 12.01 % to 16.58 %. The maximum bending force value (60.92 N) of starch straws cooled at -20 °C was significantly higher than that (46.14 N) of control straw. Conversely, the modulus of elasticity in bending values (4.21-16.43 N/cm) of rapid cooling-treated straws were significantly lower than that (48.42 N/cm) of control straw. Water absorption of rapid cooling-treated straws were lower than that of control straw, indicating the hydrophobicity property of starch straws significantly improved.

The relationship between molecular structure and film-forming properties of thermoplastic starches from different botanical sources

To illustrate the correlations between molecular structures and the film-forming properties of thermoplastic starch from various botanical sources, starches from cereal, tuber and legume were modified by thermoplastic extrusion and the corresponding thermoplastic starch films were prepared including thermoplastic corn starch (TCS), thermoplastic rice starch (TRS), thermoplastic sweet potato starch (TSPS), thermoplastic cassava starch (TCAS) and thermoplastic pea starch (TPES) films. TPES film displayed a higher tensile strength (6.28 MPa) and stronger water resistance, such as lower water solubility (15.70 %), water absorption (42.35 %), and water vapor permeability (0.285 g·mm·h-1·m-2·kPa-1) due to higher contents of amylose and B1 chains. TCAS showed a smoother and more amorphous film due to higher amylopectin content, resulting higher elongation at break and larger opacity. TCS film was the most transparent due to a compacter network and more ordered crystallinity structure, which was suit for the packaging of fresh vegetables and aquatic products, whereas TCAS film was the opaquest, which protected package foods from light such as meat products, etc. The outcome would provide an innovative theory to regulate accurately the functional properties of thermoplastic starch films for different food needs.

Efficient Accumulation of Amylopectin and Its Molecular Mechanism in the Submerged Duckweed Mutant

Large-scale use of fossil fuels has brought about increasingly serious problems of environmental pollution, development and utilization of renewable energy is one of the effective solutions. Duckweed has the advantages of fast growth, high starch content and no occupation of arable land, so it is a promising starchy energy plant. A new submerged duckweed mutant (sub-1) with abundant starch accumulation was obtained, whose content of amylopectin accounts for 84.04% of the starch granules. Compared with the wild type (Lemna aequinoctialis), the branching degree of starch in sub-1 mutant was significantly increased by 19.6%. Chain length DP 6-12, DP 25-36 and DP > 36 of amylopectin significantly decreased, while chain length DP 13-24 significantly increased. Average chain length of wild-type and sub-1 mutant starches were greater than DP 22. Moreover, the crystal structure and physical properties of starch have changed markedly in sub-1 mutant. For example, the starch crystallinity of sub-1 mutant was only 8.94%, while that of wild-type was 22.3%. Compared with wild type, water solubility of starch was significantly reduced by 29.42%, whereas swelling power significantly increased by 97.07% in sub-1 mutant. In order to further analyze the molecular mechanism of efficient accumulation of amylopectin in sub-1 mutant, metabolome and transcriptome were performed. The results showed that glucose accumulated in sub-1 mutant, then degradation of starch to glucose mainly depends on α-amylase. At night, the down-regulated β-amylase gene resulted in the inhibition of starch degradation. The starch and sucrose metabolism pathways were significantly enriched. Up-regulated expression of SUS, AGPase2, AGPase3, PYG, GPI and GYS provide sufficient substrate for starch synthesis in sub-1 mutant. From the 0H to 16H light treatment, granule-bound starch synthase (GBSS1) gene was inhibited, on the contrary, the starch branching enzyme (SBE) gene was induced. Differential expression of GBSS1 and SBE may be an important reason for the decrease ratio of amylose/amylopectin in sub-1 mutant. Taken together, our results indicated that the sub-1 mutant can accumulate the amylopectin efficiently, potentially through altering the differential expression of AGPase, GBSS1, SBE, and BAM. This study also provides theoretical guidance for creating crop germplasm with high amylopectin by means of synthetic biology in the future.

Correlation analysis on physicochemical and structural properties of sorghum starch

This manuscript analyzed physicochemical and structural properties of 30 different types of sorghum starches based on their apparent amylose content (AAC). Current results confirmed that sorghum starch exhibited irregular spherical or polygonal granule shape with 14.5 μm average particle size. The AAC of sorghum starch ranged from 7.42 to 36.44% corresponding to relative crystallinities of 20.5 to 32.4%. The properties of enthalpy of gelatinization (ΔH), peak viscosity (PV), relative crystallinity (RC), degree of double helix (DD), degree of order (DO), and swelling power (SP) were negatively correlated with AAC, while the cool paste viscosity (CPV) and setback (SB) were positively correlated with AAC. Correlations analyzed was conducted on various physicochemical parameters. Using principal component analysis (PCA) with 20 variables, the difference between 30 different types of sorghum starch was displayed. Results of current study can be used to guide the selection and breeding of sorghum varieties and its application in food and non-food industries.

Physicochemical properties, texture, and in vitro protein digestibility in high-moisture extrudate with different oil/water ratio

Oil addition is challenging during high-moisture extrusion due to the negative fiber formation effects. A previous study found that oil-in-water (O/W) emulsions could significantly increase the oil content in high-moisture extrudates, but the molecular mechanism remained unclear. This study aimed to determine O/W emulsion influence on protein physicochemical properties in SPI extrudates during high-moisture extrusion. O/W emulsions were mixed with soy protein isolates (SPI) to prepare extrudates with oil/water ratios of 0/65, 4/61, and 8/57 (w/w). SDS-PAGE and ATR-FTIR analysis showed that higher oil/water ratios enhanced protein aggregation and promoted alteration from β-sheet to random coil in SPI extrudates, which could be correlated to the reduction of protein solubility. The color was altered to lighter and yellow, and hardness, chewiness, and fiber degree decreased with increased oil/water ratios in SPI extrudates. In addition, in vitro digestion analyses showed that higher oil content contributed to improved protein digestibility.

Efficient Retention and Complexation of Exogenous Ferulic Acid in Starch: Could Controllable Bioextrusion Be the Answer?

The starch-phenolics complexes are widely fabricated as functional foods but with low phenolics retention limited by traditional liquid reaction and washing systems. In this study, ferulic acid (FA, 5%) was exogenously used in the crystalline form, and it reacted with starch in a high-solid extrusion environment, which was simultaneously controlled by thermostable α-amylase (0-252 U/g). Moderate enzymolysis (21 or 63 U/g) decreased the degree of the starch double helix and significantly increased the FA retention rate (>80%) with good melting and distribution. Although there were no significantly strong chemical bonds (with only 0.17-2.39% FA bound to starch hydrolysate), the noncovalent interactions, mainly hydrogen bonds, van der Waals forces, and electrostatic interactions, were determined by ¹H NMR and molecular dynamics simulation analyses. The phased release of total FA (>50% in the stomach and ∼100% in the intestines) from bioextrudate under in vitro digestion conditions was promoted, which gives a perspective for handing large loads of FA and other phenolics based on starch carrier.

Assessment of physicochemical, rheological, and thermal properties of Indian rice cultivars: Implications on the extrusion characteristics

The implications of physicochemical, rheological, and thermal properties of seven eminent Indian rice cultivars (PR 114, 121, 122, 123, 124, 126, and 127) on the extrusion behavior and physico-functionalities of the extrudates were investigated. The amylose and amylopectin content of the cultivars ranged between 12.72 to 28.86% and 71.14 to 87.28% in addition with protein and crude fat content that varied from 7.05 to 9.15% and 0.49 to 1.17%, respectively. The onset (r = 0.98), peak (r = 0.95), and conclusion (r = 0.98) temperatures of the cultivars were in positive correlation with amylose. Likewise, pasting temperature (r = 0.979), final viscosity (r = 0.91), set back viscosity (r = 0.89), and stability ratio (r = 0.90) of the cultivars demonstrated a significant positive correlation with the amylose content. However, peak (r = - 0.879) and hold viscosity (r = - 0.89) were negatively correlated. The cultivars were extruded at feed moisture of 15%, screw speed of 500 rpm and barrel temperature of 150°C. The extrudates characteristics viz., expansion ratio-1.82 (PR 123); bulk density-184 g/cc (PR 123); specific mechanical energy-262.35 Wh/kg; water absorption index (WAI)-6.26 (PR 122); water solubility index-48.52% (PR 123); hardness-148.63 N (PR 122); and hydration power-284% (PR 122) were viably hyphenated with the physicochemical and rheological behavior of cultivars. The physico-functional characterization of the extrudates in terms of their starch and protein structural indexes, α-amylase susceptibility; water soluble carbohydrates and proteins revealed the possibility of exploring these cultivars as a functionally viable and diverse ingredient for the production of ready-to-eat extrudates.

Effect of pre-gelatinization on α-amylase-catalyzed hydrolysis of corn starch under moderate electric field

This study aimed to explore the roles of starch structure in α-amylase-catalyzed hydrolysis under moderate electric field (MEF). Corn starch was gelatinized by controlling the temperature procedure of rapid viscos-analysis, and then the pre-gelatinized starch (3.0 g) was treated by MEF (2.5 and 5 V/cm) in the presence of α-amylase (1.5 mL). Only a slight hydrolysis occurred for native starch, showing minor increases in reducing sugar content (RSC, ∼0.19 mg/mL), slight changes in granular and semicrystalline structure, and decreases in thermostability (the maximum decomposition temperature (T_max) decreased from 322 to 300 °C). The densely-packed semicrystalline within starch granules was destroyed by pre-gelatinization, thus enhancing the hydrolysis and further decreasing the thermostability, presenting RSC values of 0.63-0.92 mg/mL and T_max of 291-292 °C. Moreover, some special crystals were formed by IEF-induced orientation of hydrolyzed starch chains. Overall, these results confirmed that the semicrystalline structure of starch dominated in MEF-assisted hydrolysis, which could provide guidance for the application of electro-based techniques in starch modification.

Effects of connection mode on acid hydrolysis of corn starch during induced electric field treatment

This study aimed to explore the effect of induced electric field (IEF) treatment on acid hydrolysis of corn starch by altering the connection modes of sample coils of a 4-reactor IEF system. Results suggested that IEF treatment could enhance the hydrolysis of corn starch and series connection (1. RRRR, η=16ESi2Pin4ZSi+Zload) exhibited higher energy efficiency than parallel (9. (RRRR), η=4ESi2PinZSi+4Zload), thus contributing to more extensive hydrolysis. Although no new functional group was formed, the starch granules were partially cracked into pieces and the crystallinity was slightly increased after IEF-assisted hydrolysis. Differential scanning calorimetry results indicated that IEF-assisted hydrolysis increased the gelatinization temperatures but decreased the enthalpy of starch, with a greatest variation was observed by series connection. Rapid visco-analysis showed that IEF-assisted hydrolysis greatly decreased the pasting viscosity of corn starch and also series connection showed the strongest reduction. The obtained results could provide a theoretical guide for the applications of IEF technology in biomaterial processing.