Review of Salmonella detection and identification methods: Aspects of rapid emergency response and food safety

Magnetic microbead enzyme-linked immunoassay based on phage encoded protein RBP 41-mediated for rapid and sensitive detection of Salmonella in food matrices

Rapid and sensitive quantitative detection methods are required to monitor and detect Salmonella throughout the food supply chain and early prevention of foodborne disease outbreaks. In this study, a magnetic microbead enzyme-linked immunoassay (MELISA) based on phage receptor binding protein was developed for rapid enrichment and detection of Salmonella in complex food matrices. RBP 41 from phage T102 acted as a species-specific recognition element for Salmonella by exploiting its strong binding capacity to Salmonella surface receptors. RBP 41-MBs were prepared by coupling recombinant RBP 41 with MBs and used to separate and enrich Salmonella cells from spiked food samples. The captured complexes were further integrated with ELISA procedures by HRP-labeled anti-Salmonella antibody for rapid and accurate detection of Salmonella. The whole method took <1.5 h and the detection limit was 10 CFU/mL. Therefore, MELISA was successfully developed for the detection of Salmonella in various spiked food samples (skim milk, lettuce, and chicken breast). The ELISA reaction process of this method was carried out on magnetic beads. It simplified the process of the traditional ELISA method and reduces the reaction time. This study expanded the use of phage-associated proteins and demonstrated the promising prospects for practical applications in the detection of foodborne pathogens.

Microbiological Profile and Hygienic Quality of Foodstuffs Marketed in Collective Catering in Central Morocco

Food hygiene is important both for its impact on the health of citizens and also for the cost of the infections that it can generate. In Morocco, it has become a concern of authorities. This work, realized for the first time in the center of Morocco, is aimed at describing the microbiological quality of foodstuffs marketed in collective catering in central Morocco. This study was conducted retrospectively from January 2015 to December 2019 in Fez city, central Morocco. The samples collected by the competent authority during official control from restaurants and food outlets were analyzed. Non-conformity was chosen as an indicator of food quality according to the official Moroccan standards. The samples were presented according to several variables: year/month/season, category/subcategory, communes, and establishment. The statistical processing of the results was done by SPSS 25. The Chi2 statistical test was calculated to determine a relationship between non-conformity and the type of analyzed matrix (year, season, and food category). The test was considered statistically significant for a p value < 0.05. A total of 2223 food samples were investigated, with an annual average of 445 samples. Overall, the rate of non-compliance during 2015-2019 was 31%, reaching its maximum in 2017 (36.4%) and its minimum in 2018 (27.5%).This rate varies by food type. Juices/drinks and meat products are the most contaminated with 71.7% and 58.1%, respectively, followed by milk and derivatives with 43.2%, seasoning sauces with 28.6%, pastries and pastry creams with 21.4%, and 14.4% for ready meals. The main causes of food non-conformity were fecal contamination germs with 67% positive fecal coliforms and 15% of total coliforms followed by total germs (7%), Staphylococcus aureus (5%), yeasts and molds (3%), sulfite-reducing anaerobes (2%), and Salmonella (1%). Given the obtained results, improving the hygienic quality of foods is necessary to ensure better consumer safety.

A CRISPR/Cas12a-mediated, DNA extraction and amplification-free, highly direct and rapid biosensor for Salmonella Typhimurium

CRISPR/Cas-based biosensors were typically used for nucleic-acid targets detection and complex DNA extraction and amplification procedures were usually inevitable. Here, we report a CRISPR/Cas12a-mediated, DNA extraction and amplification-free, highly direct and rapid biosensor (abbreviated as "CATCHER") for Salmonella Typhimurium (S. Typhimurium) with a simple (3 steps) and fast (∼2 h) sensing workflow. Magnetic nanoparticle immobilized anti-S. Typhimurium antibody was worked as capture probe to capture the target and provide movable reaction interface. Colloidal gold labeled with anti-S. Typhimurium antibody and DNase I was used as detection probe to bridge the input target and output signal. First, in the presence of S. Typhimurium, an immuno-sandwich structure was formed. Second, DNase I in sandwich structure degraded the valid, complete activator DNA to invalid DNA fragments which can't trigger the trans-cleavage activity of Cas12a. Finally, the integrity of reporter DNA was preserved presenting a low fluorescence signal. Conversely, in the absence of S. Typhimurium, strong fluorescence recovery appeared owing to the cutting of reporter by activated Cas12a. Significantly, the proposed "CATCHER" showed satisfactory detection performance for S. Typhimurium with the limit of detection (LOD) of 7.9 × 101 CFU/mL in 0.01 M PBS and 6.31 × 103 CFU/mL in spiked chicken samples, providing a general platform for non-nucleic acid targets.

Aptamer-Based Electrochemical Biosensors for the Detection of Salmonella: A Scoping Review

The development of rapid, accurate, and efficient detection methods for Salmonella can significantly control the outbreak of salmonellosis that threatens global public health. Despite the high sensitivity and specificity of the microbiological, nucleic-acid, and immunological-based methods, they are impractical for detecting samples outside of the laboratory due to the requirement for skilled individuals and sophisticated bench-top equipment. Ideally, an electrochemical biosensor could overcome the limitations of these detection methods since it offers simplicity for the detection process, on-site quantitative analysis, rapid detection time, high sensitivity, and portability. The present scoping review aims to assess the current trends in electrochemical aptasensors to detect and quantify Salmonella. This review was conducted according to the latest Preferred Reporting Items for Systematic review and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) guidelines. A literature search was performed using aptamer and Salmonella keywords in three databases: PubMed, Scopus, and Springer. Studies on electrochemical aptasensors for detecting Salmonella published between January 2014 and January 2022 were retrieved. Of the 787 studies recorded in the search, 29 studies were screened for eligibility, and 15 studies that met the inclusion criteria were retrieved for this review. Information on the Salmonella serovars, targets, samples, sensor specification, platform technologies for fabrication, electrochemical detection methods, limit of detection (LoD), and detection time was discussed to evaluate the effectiveness and limitations of the developed electrochemical aptasensor platform for the detection of Salmonella. The reported electrochemical aptasensors were mainly developed to detect Salmonella enterica Typhimurium in chicken meat samples. Most of the developed electrochemical aptasensors were fabricated using conventional electrodes (13 studies) rather than screen-printed electrodes (SPEs) (two studies). The developed aptasensors showed LoD ranges from 550 CFU/mL to as low as 1 CFU/mL within 5 min to 240 min of detection time. The promising detection performance of the electrochemical aptasensor highlights its potential as an excellent alternative to the existing detection methods. Nonetheless, more research is required to determine the sensitivity and specificity of the electrochemical sensing platform for Salmonella detection, particularly in human clinical samples, to enable their future use in clinical practice.

Recent trends and developments of PCR-based methods for the detection of food-borne Salmonella bacteria and Norovirus

In recent years, rapid detection methods such as polymerase chain reaction (PCR) and quantitative real-time PCR (qPCR) have been continuously developed to improve the detection of food-borne pathogens in food samples. The recent developments of PCR and qPCR in the detection and identification of these food-borne pathogens are described and elaborated throughout this review. Specifically, further developments and improvements of qPCR are discussed in detecting Salmonella and norovirus. Promising advances in these molecular detection methods have been widely used to prevent human food-borne illnesses and death caused by the food-borne pathogens. In addition, this review presents the limitations and challenges of the detection methods which include conventional culture method and conventional PCR method in detecting Salmonella and norovirus. Furthermore, several advances of qPCR such as viability PCR (vPCR) and digital PCR (dPCR) have been discussed in the detection of Salmonella and norovirus. Good practice of analysis of the food-borne pathogens and other contaminants in the food industry as well as the advancement of molecular detection methods will help improve and ensure food safety and food quality.

Antimicrobial Susceptibility of Salmonella Isolated from Chickens and Humans in Wau, South Sudan

Background. Salmonella infections are a public health problem across the globe. In South Sudan, there is little information regarding the prevalence and antibiotic resistance patterns of Salmonella. Therefore, this study assessed the prevalence and antimicrobial susceptibility of Salmonella isolates from chickens and humans in South Sudan. Fecal samples were collected and cultured on Xylose Lysine Deoxycholate Agar for the isolation of Salmonella and confirmed using biochemical tests and PCR through the amplification of the invA gene. A total of 417 fecal samples were examined, of which 270 (64.7%) were chicken cloacal swabs while 147 (35.3%) were humans’ stool specimens. Results. Eleven (11) Salmonella isolates were isolated from humans while nine were from chickens. All 11 isolates from humans were susceptible to sulfamethoxazole-trimethoprim, chloramphenicol, streptomycin, cefotaxime, nalidixic acid, and gentamicin. However, 4 (36.7%) isolates showed resistance to ciprofloxacin, 2 (18.9%) to ampicillin, and 1 (9.1%) to tetracycline. All chicken isolates were susceptible to chloramphenicol, streptomycin, sulfamethoxazole-trimethoprim, ciprofloxacin, cefotaxime, nalidixic acid, and gentamicin but showed resistance to tetracycline 2 (22.2%) and ampicillin 1 (11.1%). Conclusion. Antimicrobial resistant isolates were isolated in both chickens and humans. Further, MDR isolates were found in both chicken and human samples, and this is a public health concern. This, therefore, calls for concerted efforts to educate producers and consumers on public health, food safety, food hygiene in food production, and enhancement of surveillance programmes on zoonotic bacteria and antimicrobial susceptibility.

Phylogenetic analyses of Salmonella detected along the broiler production chain in Trinidad and Tobago

This study was conducted to determine the phylogenies of Salmonella strains isolated from cross-sectional studies conducted at hatcheries, broiler farms, processing plants, and retail outlets (broiler production chain) in Trinidad and Tobago over 4 yr (2016-2019). Whole-genome sequencing (WGS) was used to characterize Salmonella isolates. Core genome phylogenies of 8 serovars of public health significance were analyzed for similarities in origin and relatedness. In addition, Salmonella strains isolated from human salmonellosis cases in Trinidad were analyzed for their relatedness to the isolates detected along the broiler production chain. The common source of these isolates of diverse serovars within farms, within processing plants, between processing plants and retail outlets, and among farm-processing plant-retail outlet continuum was well-supported (bootstrap value >70%) by the core genome phylogenies for the respective serovars. Also, genome analyses revealed clustering of Salmonella serovars of regional (intra-Caribbean) and international (extra-Caribbean) origin. Similarly, strains of S. Enteritidis and S. Infantis isolated from human clinical salmonellosis in 2019 from Trinidad and Tobago clustered with our processing plant isolates recovered in 2018. This study is the first phylogenetic analysis of Salmonella isolates using WGS from the broiler industry in the Caribbean region. The use of WGS confirmed the genetic relatedness and transmission of Salmonella serovars contaminating chickens in broiler processing, and retailing in the country, with zoonotic and food safety implications for humans.

Design and Development of Magnetic Iron Core Gold Nanoparticle-Based Fluorescent Multiplex Assay to Detect Salmonella

Salmonella is a bacterial pathogen which is one of the leading causes of severe illnesses in humans. The current study involved the design and development of two methods, respectively using iron oxide nanoparticle (IONP) and iron core gold nanoparticle (ICGNP), conjugated with the Salmonella antibody and the fluorophore, 4-Methylumbelliferyl Caprylate (4-MUCAP), used as an indicator, for its selective and sensitive detection in contaminated food products. Twenty double-blind beverage samples, spiked with Salmonella enteritidis, Staphylococcus aureus, and Escherichia coli, were prepared in sterile Eppendorf^® tubes at room temperature. The gold layer and spikes of ICGNPs increased the surface areas. The ratio of the surface area is 0.76 (IONPs/ICGNPs). The comparative sensitivity and specificity of the IONP-based and the ICGNP-based methods to detect Salmonella were determined. The ICGNP method shows the limit of detection is 32 Salmonella per mL. The ICGNPs had an 83.3% sensitivity and a 92.9% specificity value for the presence and detection of Salmonella. The IONP method resulted in a limit of detection of 150 Salmonella per mL, and a 66.7% sensitivity and 83.3% specificity for the presence and detection of Salmonella. The higher surface area of ICGNPs increases the efficiency of detection. The monitoring of Salmonella can thus be achieved by a rapid magnetic fluorescent assay using a smartphone for image capture and analyze, providing quantitative results. The findings from the present study would help to detect Salmonella rapidly in water. It can improve the microbial quality of water and food safety due to the presence of Salmonella in the water environment.

Salmonella typhi: a rare cause of neck abscess

Salmonella typhi neck abscess represents a rare cause of focal salmonellosis. Most of the cases in the literature reviews were reported in immunosuppression adults; just two of them were in children. Herein we report a case of 7-year old healthy girl with a neck abscess caused by S. typhi. The patient was diagnosed according to serological and radiological findings. Incision and drainage of the abscess accompanied by broad-spectrum antibiotics were performed for treatments. S. typhi should be kept in mind as a cause of neck abscesses.

Phenotypic and genotypic characterization of antimicrobial resistance profiles in Salmonella isolated from waterfowl in 2002–2005 and 2018–2020 in Sichuan, China

Salmonella enterica is a widespread foodborne pathogen with concerning antimicrobial resistance (AMR). Waterfowl are a major source of Salmonella transmission, but there are few systematic studies on Salmonella prevalence in waterfowl species. In this study, 126 Salmonella isolates (65 collected in 2018–2020 and 61 collected in 2002–2005) were obtained from waterfowl samples in Sichuan, China. Their serotypes, pulsed-field gel electrophoresis (PFGE) types, and phenotypic and genotypic AMR profiles were systematically examined. The isolates were distributed in 7 serotypes, including serovars Enteritidis (46.0%), Potsdam (27.8%), Montevideo (7.9%), Cerro (6.3%), Typhimurium (4.8%), Kottbus (4.0%) and Apeyeme (3.2%). Their PFGE characteristics were diverse; all isolates were distributed in four groups (cutoff value: 60.0%) and 20 clusters (cutoff value: 80.0%). Moreover, all isolates were multidrug resistant, and high rates of AMR to lincomycin (100.0%), rifampicin (100.0%), sulfadiazine (93.7%), erythromycin (89.7%), ciprofloxacin (81.0%), and gentamicin (75.4%) were observed. Finally, 49 isolates were subjected to whole-genome sequencing, and a wide variety of AMR genes were found, including multiple efflux pump genes and specific resistance genes. Interestingly, the tet(A)/tet(B) and catII resistance genes were detected in only isolates obtained in the first collection period, while the gyrA (S83F, D87N and D87G) and gyrB (E466D) mutations were detected at higher frequencies in the isolates obtained in the second collection period, supporting the findings that isolates from different periods exhibited different patterns of resistance to tetracycline, chloramphenicol and nalidixic acid. In addition, various incompatible plasmid replicon fragments were detected, including Col440I, Col440II, IncFIB, IncFII, IncX1, IncX9, IncI1-I and IncI2, which may contribute to the horizontal transmission of AMR genes and provide competitive advantages. In summary, we demonstrated that the Salmonella isolates prevalent in Sichuan waterfowl farms exhibited diverse serotypes, multiple AMR phenotypes and genotypes, and AMR changes over time, indicating their potential risks to public health.

Genomic virulence genes profile analysis of Salmonella enterica isolates from animal and human in China from 2004 to 2019

Salmonella is a momentously zoonotic and food-borne pathogen that seriously threats human and animal health around the world. Salmonella pathogenicity is closely related to its virulence genes profile. However, conventional virulence gene analysis methods cannot truly reveal whole virulence genes carried by Salmonella. In this study, whole genome sequencing in combination with Virulence Factor Database were applied to investigate whole virulence gene profiles of 243 Salmonella isolates from animals and humans in China from 2004 to 2019. The results showed that a total of 670 virulence genes were identified in Salmonella, among them, 319 virulence genes were found in all the Salmonella tested isolates, and 9 virulence genes were unique to Salmonella. The 670 virulence genes were classified into 14 categories according to their functions, and the genes related to adherence, effector delivery system, immune modulation, motility and nutritional/metabolic factors accounted for 84.63%. Relationships between virulence genes and serovars, sequence types indicated that strains belonged to the same serovar or sequence type had similar virulence genes profiles, however, isolates from different sources, years and locations of isolation had variable virulence gene profiles. In addition, copy number of virulence genes and homologous virulence genes shared with other pathogens were also analyzed in this study. In summary, we investigated pan-genomic virulence gene profiles and molecular epidemiology of Salmonella isolates from humans and animals in China from 2004 to 2019. These findings are beneficial for pathogenic monitoring, investigation of virulence evolution as well as prevention and control of Salmonella.

Salmonella spp. in Chicken: Prevalence, Antimicrobial Resistance, and Detection Methods

Multidrug-resistant Salmonella spp. is one of the leading causes of worldwide foodborne disease outbreaks. Animal-derived foods, particularly chicken and poultry products, are the most likely source of Salmonella transmission to humans. The increasing demand for chicken meat has raised a global food safety issue. This review aims to determine the prevalence and antimicrobial resistance of Salmonella spp. in chickens from various countries in Asia. The methods for detecting Salmonella will also be discussed in this review. The prevalence of Salmonella spp. in chicken and poultry products is lower in developed countries than in developing countries. In addition, the incidence of Salmonella spp. in chicken and poultry products from fresh markets is higher than those from supermarkets. Furthermore, this review also reported the presence of multidrug-resistant Salmonella strains in various Asian countries. Rapid Salmonella detection based on immunological assays, molecular-based assays, and biosensors can provide more accurate results with high sensitivity and specificity. These methods also require a shorter time than the cultural-based Salmonella detection method. The use of suitable detection methods to determine the presence of Salmonella spp. in chicken and poultry products is important to ensure food safety.

On-site detection of fish furunculosis by combining DNAzyme and carboxyl-functionalized graphene

Furunculosis, which is caused by Aeromonas salmonicida, can induce septicemia, leading to the rapid death of fishes belonging to Salmonidae, Cyprinidae, and Fuscheridae, and lamprey. Targeting A. salmonicida, five DNAzyme sequences with the highest enrichment rates were selected through the Systematic Evolution of Ligands by Exponential Enrichment (SELEX). The enrichment rates were 34.78, 23.60, 8.91, 2.89, and 2.34%, respectively. The DNAzyme with the highest activity, named D-AS-2, showed specificity and sensitivity. D-AS-2 was combined with carboxyl-functionalized graphene to construct a biosensor, which showed good fluorescence response to scabies lesion samples. The diagnostic procedure was completed in &lt;2 min and can be used for the on-site diagnosis of fish diseases. A low-cost, rapid, simple, and highly specific biosensor for the diagnosis of furunculosis was established based on DNAzyme and carboxyl-functionalized graphene.

Improving the sensitivity of lateral flow immunoassay for Salmonella typhimurium detection via flow-rate regulation

Application of the traditional immunochromatographic assay (ICGA) has been limited by its poor sensitivity. The objective of this study was to increase the sensitivity of the traditional ICGA. A dual-mode ICGA (D-M ICGA) was developed by combining a nanozyme-assisted signal-amplification strategy with a magnetic-nanoparticle-based flow-speed-control strategy. Salmonella typhimurium can be detected simultaneously based on color and magnetic signals in the detection area of the D-M ICGA strip. The calculated limits of detection of 50 cfu·mL^-1 and 75 cfu·mL^-1 in the color and magnetic modes, respectively, were approximately 1000 times lower than those of the traditional ICGA. The selectivity and practical applicability of the D-M ICGA were also confirmed in this study. The results prove that the D-M ICGA is an assay that could be used for Salmonella typhimurium detection and can be easily adapted to detect other pathogenic bacteria.

Comparison of colourimetric loop-mediated isothermal amplification (LAMP), PCR and high-resolution melt curve analysis and culture based diagnostic assays in the detection of three salmonella serotypes in poultry

The accuracy of two molecular tests, PCR and loop-mediated isothermal amplification (LAMP) assay were compared with bacterial culture in detection of salmonella in poultry clinical samples. The icIR family transcriptional regulator gene was targeted and out of 56 clinical specimens, 20 poultry field isolates were found positive for salmonella. Along with human isolates, reference strains of three different serovars, Salmonella Enteritidis (S. Enteritidis), S. Typhimurium and S. Infantis, were also tested. Eight different but genetically closely related bacterial genera (Klebsiella, Pseudomonas, Enterobacter, Campylobacter, Staphylococcus, Streptococcus, Escherichia and Pasteurella) were also used to evaluate the specificity of assay. The LAMP assay showed 80.8% sensitivity (95% CI, 0.66-0.95) and 100% specificity (95% CI, 0.71-1.00) when compared with microbiological culture and PCR, both with 100% sensitivity (95% CI, 0.87-1.00) and 100% specificity (95% CI, 0.71-1.00). High-resolution melt (HRM) curve analysis following PCR was able to differentiate between salmonella isolates based on their melting points, and all specimens were genotyped in three distinct HRM curve profiles. Each normalised melt curve profile represented one salmonella serotype and differences between the three melt profiles were correlated with nucleotide variations in the target gene sequences which demonstrated high discriminatory power of this technique. The colourimetric LAMP assay provided an alternative detection method capable of being used in the field and showed analytical sensitivity for detection of 1 pg of salmonella DNA per reaction. The advantages and disadvantages of each test in detection of salmonella are discussed.

A Specific and Sensitive Aptamer-Based Digital PCR Chip for Salmonella typhimurium Detection

Food poisoning and infectious diseases caused by Salmonella typhimurium (S. typhimurium) are serious public health concerns for human health and food safety. The diversity and complexity of food matrices pose great challenges for rapid and ultra-sensitive detection of S. typhimurium in food samples. A method capable of identification, detection, and quantification of S. typhimurium is essential for addressing these issues. In this study, aptamer-coated magnetic beads (Apt-MBs) are employed as capture bio-probes to specifically and selectively concentrate S. typhimurium in food samples. A self-priming chip-based digital PCR was then presented as another biosensor for on-site detection and quantification of S. typhimurium cells. The chip we developed was robust and did not require any external power for sample loading. The combination of Apt-MBs with an on-chip digital detection realized the integration into lab-on-a-chip-based biosensors for on-site monitoring of foodborne pathogens. It was possible to capture and detect S. typhimurium cells as low as 90 CFU/reaction with a capture efficiency of 94.5%. Additionally, the whole process only took about 2 h. This unique platform could also be used to monitor other target bacteria with high specificity and sensitivity by utilizing different aptamers. Furthermore, the platform has potential applications in point-of-care testing in the future.

Colorimetric detection of Salmonella typhimurium based on hexadecyl trimethyl ammonium bromide-induced supramolecular assembly of β-cyclodextrin-capped gold nanoparticles

We developed an effective and specific colorimetric strategy to detect Salmonella typhimurium (S. typhimurium) based on hexadecyl trimethyl ammonium bromide (CTAB)-induced supramolecular assembly of β-cyclodextrin-capped gold nanoparticles (β-CD-AuNPs). In this study, ssDNA aptamer of S. typhimurium could combine with CTAB to form the supramolecular ssDNA-CTAB composite, so the ssDNA aptamer was applied to control the concentration of CTAB. In the presence of S. typhimurium, ssDNA aptamers selectively bound to S. typhimurium but not to CTAB, leading to the host-guest chemistry reaction of CTAB and β-CD resulting in β-CD-AuNP supramolecular assembly aggregation with an obvious color change. The ratio of absorption at 650 and 520 nm (A_650nm/A_520nm) has a linear correlation to the log scale of the concentration of the bacteria (1 × 10²-1 × 10⁷ CFU/mL) with a low limit of detection (LOD) of 13 CFU/mL. In addition, this optical sensor has good selectivity and practicability. In milk samples, the recovery was 93.55-111.32%, which suggested its potential application in real samples.

A Novel Prototype Biosensor Array Electrode System for Detecting the Bacterial Pathogen Salmonella typhimurium

Salmonellosis caused by Salmonella sp. has long been reported all over the world. Despite the availability of various diagnostic methods, easy and effective detection systems are still required. This report describes a dialysis membrane electrode interface disc with immobilized specific antibodies to capture antigenic Salmonella cells. The interaction of a specific Salmonella antigen with a mouse anti-Salmonella monoclonal antibody complexed to rabbit anti-mouse secondary antibody conjugated with HRP and the substrate o-aminophenol resulted in a response signal output current measured using two electrode systems (cadmium reference electrode and glassy carbon working electrode) and an agilent HP34401A 6.5 digital multimeter without a potentiostat or applied potential input. A maximum response signal output current was recorded for various concentrations of Salmonella viz., 3, 30, 300, 3000, 30,000 and 300,000 cells. The biosensor has a detection limit of three cells, which is very sensitive when compared with other detection sensors. Little non-specific response was observed using Streptococcus, Vibrio, and Pseudomonas sp. The maximum response signal output current for a dialysis membrane electrode interface disc was greater than that for gelatin, collagen, and agarose. The device and technique have a range of biological applications. This novel detection system has great potential for future development and application in surveillance for microbial pathogens.

Novel multiplex PCR assays for rapid identification of Salmonella serogroups B, C1, C2, D, E, S. enteritidis, and S. typhimurium

Foodborne illnesses caused by Salmonella represent a significant public health problem worldwide. The aim of this study was to establish multiplex PCR (mPCR) for the rapid identification of Salmonella serogroups B, C1, C2, D, and E as well as for the serovars enteritidis and typhimurium. Employing pan-genome analysis and PCR verification, B-rfbJ, C1-9679, C2-pimB, D-rfbJ, E-rfbC, and four genes (SE18636, SE16574, SE2599, and SE13329) were identified as specific target genes for Salmonella serogroups B, C1, C2, D, E, and S. enteritidis, respectively. Thereafter, three novel mPCR assays (one of 3-mPCR and two of 2-mPCR) were successfully developed to identify these bacteria based on the target genes and another S. typhimurium-specific STM4495 gene. The primers targeting C1-9679, C2-pimB, and E-rfbC genes specific to the serogroups C1, C2, and E, respectively, constituted a 3-mPCR, while the other two 2-mPCRs, respectively, consisting primers specific to serogroup D and S. enteritidis (D-rfbJ and SE16574), and serogroup B and S. typhimurium-specific primers (B-rfbJ and STM4495), were also designed. The specificity of each mPCR was further evaluated by using non-target strains. The detection limits of mPCRs were approximately 10³-10⁴ CFU mL^-1 in pure culture and 10⁴-10⁵ CFU g^-1 in spiked chicken meat. In addition, mPCR assays could correctly detect target Salmonella in food samples. These results suggest that specific targets could be mined efficiently through a pan-genome analysis tool, and the novel mPCR assays developed in this study offer a promising technique for rapid and accurate detection of five serogroups of Salmonella (B, C1, C2, D, and E) and two serovars (S. enteritidis and S. typhimurium).

Recent Advances and Applications of Rapid Microbial Assessment from a Food Safety Perspective

Unsafe food is estimated to cause 600 million cases of foodborne disease, annually. Thus, the development of methods that could assist in the prevention of foodborne diseases is of high interest. This review summarizes the recent progress toward rapid microbial assessment through (i) spectroscopic techniques, (ii) spectral imaging techniques, (iii) biosensors and (iv) sensors designed to mimic human senses. These methods often produce complex and high-dimensional data that cannot be analyzed with conventional statistical methods. Multivariate statistics and machine learning approaches seemed to be valuable for these methods so as to "translate" measurements to microbial estimations. However, a great proportion of the models reported in the literature misuse these approaches, which may lead to models with low predictive power under generic conditions. Overall, all the methods showed great potential for rapid microbial assessment. Biosensors are closer to wide-scale implementation followed by spectroscopic techniques and then by spectral imaging techniques and sensors designed to mimic human senses.

Architecting of an aptasensor for the staphylococcus aureus analysis by modification of the screen-printed carbon electrode with aptamer/Ag-Cs-Gr QDs/NTiO2

Given the many issues bacterial infections cause to humans and the necessity for their detection, in this work we developed a robust aptasensor for prompt, ultrasensitive, and selective analysis of staphylococcus aureus bacterium (S. aureus). A nanocomposite of Ag nanoparticles, chitosan, graphene quantum dots, and nitrogen-doped TiO₂ nanoparticles (Ag-Cs-Gr QDs/NTiO₂) was synthesized, and thoroughly characterized by XRD, FT-IR, and FE-SEM spectroscopic methods. The surface of screen-printed carbon electrodes modified with Ag-Cs-Gr QDs/NTiO₂ nanocomposite was utilized as a compatible platform for aptamer attachment. The aptasensor accurately determined S. aureus in the dynamic range of 10-5 × 10⁸ CFU/mL with detection limit of 3.3 CFU/mL. The monitoring of the practical performance of aptasensor in human serum samples revealed its superiority over the conventional methods (relative recovery of 96.25-103.33%). The Ag-Cs-Gr QDs/NTiO₂-based aptasensor offers facile, biocompatibility, good repeatability, reproducibility (RSD = 3.66%), label free and stabile strategy for sensitive S. aureus analysis free from biomolecules interferences in actual specimens.

Identification and Subtyping of Salmonella Isolates Using Matrix-Assisted Laser Desorption–Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF)

Subtyping of bacterial isolates of the same genus and species is an important tool in epidemiological investigations. A number of phenotypic and genotypic subtyping methods are available; however, most of these methods are labor-intensive and time-consuming and require considerable operator skill and a wealth of reagents. Matrix-Assisted Laser Desorption–Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF), an alternative to conventional subtyping methods, offers a rapid, reproducible method for bacterial identification with a high sensitivity and specificity and at minimal cost. The purpose of this study was to determine the feasibility of using MALDI-TOF to differentiate between six Salmonella serovars recovered from experimental microcosms inoculated with known strains of Salmonella. Following the establishment of a MALDI-TOF reference library for this project, the identity of 843 Salmonella isolates recovered from these microcosms was assessed using both MALDI-TOF and conventional methods (serotyping/PCR). All 843 isolates were identified as being Salmonella species. Overall, 803/843 (95%) of these isolates were identified similarly using the two different methods. Positive percent agreement at the serovar level ranged from 79 to 100%, and negative percent agreement for all serovars was greater than 98%. Cohen’s kappa ranged from 0.85 to 0.98 for the different serovars. This study demonstrates that MALDI-TOF is a viable alternative for the rapid identification and differentiation of Salmonella serovars.

A Novel Fluorescence Aptasensor Based on Magnetic Beads/Gold Nanoparticles/DNA-Stabilized Silver Nanoclusters for Detection of Salmonella Typhimurium

Salmonella Typhimurium (S. Typhimurium) is a globally distributed foodborne pathogen, which can lead to outbreaks of foodborne infectious diseases. It is essential to guarantee food safety by timely and correct detection of S. Typhimurium. In this investigation, an original fluorescence aptasensor was constructed to detect S. Typhimurium rapidly and sensitively. Through the coupling of magnetic beads, aptamer, and gold nanoparticles (AuNPs), a fluorescence quenching system with a "sandwich structure" was established. The aptamer acted as a link, and its specific binding to S. Typhimurium could release AuNPs from the system. Meanwhile, fluorescent DNA-stabilized silver nanoclusters (DNA-AgNCs) were synthesized. The fluorescence intensity changes caused by the fluorescence resonance energy transfer between DNA-AgNCs and AuNPs were utilized to detect S. Typhimurium. The purposed aptasensor exhibited high selectivity and sensitivity with a linear response to S. Typhimurium, ranging from 3.7 × 10² to 3.7 × 10⁵ cfu/mL. The limit of detection (LOD) was estimated to be 98 cfu/mL within 2 h 10 min. In addition, this method showed excellent application for detection of S. Typhimurium in artificially contaminated milk, with LOD reaching 3.4 × 10² cfu/mL. Therefore, the developed fluorescence aptasensor has great potential to identify S. Typhimurium in foodstuffs.

Retroreflection-based sandwich type affinity sensing of isothermal gene amplification products for foodborne pathogen detection

Loop-mediated isothermal amplification (LAMP) is an outstanding method for molecular diagnostics, as the rapid, specific, and sensitive amplification of target genes is possible. However, it is necessary to measure fluorescence in the quantitative analysis of LAMP products, so a sophisticated optical setup is required. This study tried to develop a novel sensing method that can quantify target analytes with simple equipment, such as nonspectroscopic white light and a CMOS camera. To achieve this, a retroreflective Janus particle (RJP) as a probe and specially designed loop primers, fluorescein isothiocyanate (FITC)- and biotin-modified loop primers, were introduced into the LAMP system. By performing LAMP in the presence of designed primers, double-stranded amplicons possessing FITC and biotin labels at each end are generated in proportion to the quantity of the target pathogen. Using the anti-FITC antibody-modified sensing surface and streptavidin-conjugated RJP probes, the amplicons can be captured in sandwich-configuration and detected under nonspectroscopic conditions composed of white light and a camera. To confirm the feasibility of the sensing system, the invA gene of Salmonella was selected as the target. It was possible to quantitatively analyze the Salmonella concentration from 0 to 10⁶ colony-forming units, sufficiently covering the required detection range. In addition, quantitative analyses of pathogens in contaminated food sources, including milk and chicken meat, were successfully conducted with a limit of detection of 10 CFU.

Bioactive triple peptide inhibits inflammasome activation to alleviate Salmonella-induced intestinal inflammation in mice via modulation of host defense and bacterial virulence

Over the past long period, Salmonella Typhimurium has been an important pathogen that causes intestinal diseases and spells enormous economic shock to animal husbandry all over the world. Pyroptosis and...

New analytical methods using carbon-based nanomaterials for detection of Salmonella species as a major food poisoning organism in water and soil resources

Salmonella is one of the most prevalent causing agents of food- and water-borne illnesses, posing an ongoing public health threat. These food-poisoning bacteria contaminate the resources at different stages such as production, aggregation, processing, distribution, as well as marketing. According to the high incidence of salmonellosis, effective strategies for early-stage detection are required at the highest priority. Since traditional culture-dependent methods and polymerase chain reaction are labor-intensive and time-taking, identification of early and accurate detection of Salmonella in food and water samples can prevent significant health economic burden and lessen the costs. The immense potentiality of biosensors in diagnosis, such as simplicity in operation, the ability of multiplex analysis, high sensitivity, and specificity, have driven research in the evolution of nanotechnology, innovating newer biosensors. Carbon nanomaterials enhance the detection sensitivity of biosensors while obtaining low levels of detection limits due to their possibility to immobilize huge amounts of bioreceptor units at insignificant volume. Moreover, conjugation and functionalization of carbon nanomaterials with metallic nanoparticles or organic molecules enables surface functional groups. According to these remarkable properties, carbon nanomaterials are widely exploited in the development of novel biosensors. To be specific, carbon nanomaterials such as carbon nanotubes, graphene and fullerenes function as transducers in the analyte recognition process or surface immobilizers for biomolecules. Herein the potential application of carbon nanomaterials in the development of novel Salmonella biosensors platforms is reviewed comprehensively. In addition, the current problems and critical analyses of the future perspectives of Salmonella biosensors are discussed.

Detection of invA virulence gene of multidrug-resistant Salmonella species isolated from the cloacal swab of broiler chickens in Blitar district, East Java, Indonesia

Background and Aim:

The increasing number of multidrug-resistant (MDR) Salmonella species on poultry farms in Indonesia has caused concern regarding human health. This study was conducted to determine the presence of the virulence gene invA in MDR Salmonella species isolated from the cloacal swab of broiler chickens in Blitar district, East Java Province, Indonesia.

Materials and Methods:

Cloacal swab samples were collected by purposive sampling from 15 farms in four districts. Isolation and identification of bacteria were performed using standard microbiological techniques. Confirmation of MDR isolates was done using five different classes of antibiotics, including the beta-lactam, aminoglycoside, fluoroquinolone, phenicol, and monobactam groups. An antibiotic susceptibility test was conducted using the Kirby–Bauer disk diffusion method, and a polymerase chain reaction method was used to screen for the presence of invA.

Results:

It was observed that 32.26% (50/155) of the samples were positive for Salmonella species. Of these 50 Salmonella isolates, 7 (14%) were identified as MDR strains. An important finding was the detection of invA in all the seven MDR Salmonella strains (100%) isolated from the cloacal swab of broiler chickens in Blitar district, East Java Province.

Conclusion:

Veterinarians have an extremely important role in monitoring the use of antibiotics in farm animals to mitigate the rapid spread of MDR organisms in our environment, which can otherwise cause serious economic losses and also public health issues.

Overview of Rapid Detection Methods for Salmonella in Foods: Progress and Challenges

Salmonella contamination in food production and processing is a serious threat to consumer health. More and more rapid detection methods have been proposed to compensate for the inefficiency of traditional bacterial cultures to suppress the high prevalence of Salmonella more efficiently. The contamination of Salmonella in foods can be identified by recognition elements and screened using rapid detection methods with different measurable signals (optical, electrical, etc.). Therefore, the different signal transduction mechanisms and Salmonella recognition elements are the key of the sensitivity, accuracy and specificity for the rapid detection methods. In this review, the bioreceptors for Salmonella were firstly summarized and described, then the current promising Salmonella rapid detection methods in foodstuffs with different signal transduction were objectively summarized and evaluated. Moreover, the challenges faced by these methods in practical monitoring and the development prospect were also emphasized to shed light on a new perspective for the Salmonella rapid detection methods applications.

A novel fluorescent platform of DNA-stabilized silver nanoclusters based on exonuclease III amplification-assisted detection of Salmonella Typhimurium

A novel fluorescent platform of DNA-stabilized silver nanoclusters (DNA-AgNCs) has been developed based on exonuclease III (Exo III) amplification-assisted for simple and sensitive detection of Salmonella Typhimurium (S. Typhimurium). The platform was designed by using magnetic beads, aptamer, its complementary DNA, hairpin probe (HP), Exo III, AgNO₃, and NaBH₄. The functionalized HP contained a cytosine-rich oligonucleotide loop (C-rich loop), which served as an effective template for the chemical reduction of Ag⁺ with NaBH₄ to synthesize DNA-AgNCs. In the presence of S. Typhimurium, the C-rich loop was converted into an open form of ssDNA by the recycle digestion of Exo III, leading to a corresponding decrease in fluorescence intensity. Based on the fluorescence changes of the formed DNA-AgNCs, the sensitive detection of S. Typhimurium was achieved. Under the optimal conditions, a wide linear relationship was observed in the concentration of S. Typhimurium ranging from 4.6 × 10² to 4.6 × 10⁷ cfu mL^-1 with the limit of detection (LOD) being 82 cfu mL^-1. The method showed good selectivity for detecting S. Typhimurium. In addition, the platform could be used for the detection of S. Typhimurium in milk samples. The LOD reached 6.6 × 10² cfu mL^-1 with a good linear range, indicating that the method had excellent practicability in complex food samples.

Advancement in Salmonella Detection Methods: From Conventional to Electrochemical-Based Sensing Detection

Large-scale food-borne outbreaks caused by Salmonella are rarely seen nowadays, thanks to the advanced nature of the medical system. However, small, localised outbreaks in certain regions still exist and could possess a huge threat to the public health if eradication measure is not initiated. This review discusses the progress of Salmonella detection approaches covering their basic principles, characteristics, applications, and performances. Conventional Salmonella detection is usually performed using a culture-based method, which is time-consuming, labour intensive, and unsuitable for on-site testing and high-throughput analysis. To date, there are many detection methods with a unique detection system available for Salmonella detection utilising immunological-based techniques, molecular-based techniques, mass spectrometry, spectroscopy, optical phenotyping, and biosensor methods. The electrochemical biosensor has growing interest in Salmonella detection mainly due to its excellent sensitivity, rapidity, and portability. The use of a highly specific bioreceptor, such as aptamers, and the application of nanomaterials are contributing factors to these excellent characteristics. Furthermore, insight on the types of biorecognition elements, the principles of electrochemical transduction elements, and the miniaturisation potential of electrochemical biosensors are discussed.

Nanostructured perovskite type gadolinium orthoferrite decorated RGO nanocomposite for the detection of nitrofurantoin in human urine and river water samples

Nitrofurantoin (NFT) is mainly used in humans for the treatment of urinary tract infections. NFT is used as feed additives in animals, due to its broad antimicrobial activity. However, it shows more side effects on human health and the environment. Therefore low-cost, portable, and rapid sensors are necessary for the detection of NFT in real samples. Herein, we successfully developed an electrochemical sensor using a glassy carbon electrode (GCE) modified with gadolinium orthoferrite (GdFeO₃) decorated on reduced graphene oxide (RGO) nanocomposite for the detection of NFT. The facile hydrothermal method was used to synthesis a novel GdFeO₃/RGO nanocomposite, the morphological and structural characterization was confirmed by the FESEM, HRTEM, EDX, XRD, Raman, and XPS techniques. The formation mechanism of GdFeO₃/RGO nanocomposite had been discussed. The effective intercalation of the nanostructured GdFeO₃ to the RGO sheets leads to the significant enhancement in physicochemical properties such as electrical conductivity, electro-active surface area, structural stability, and electrochemical activity, which was observed from the EIS and CV experimental results. The electrochemical studies established that the developed GdFeO₃/RGO sensor was highly sensitive and selective to NFT. Moreover, the GdFeO₃/RGO sensor exhibits good sensitivity of 4.1985 μA μM^-1 cm^-2, a low detection limit (LOD) of 0.0153 µM and a linear range from 0.001 to 249 µM for NFT detection under optimized experimental conditions. In addition, the investigation of storage time on the CV response of the GdFeO₃/RGO sensor indicates superior stability. Owing to these extraordinary analytical advantages, the as-fabricated sensor was applied to detect the NFT levels in human urine and river water samples with satisfactory results.

Recent Progress of the Practical Applications of the Platinum Nanoparticle-Based Electrochemistry Biosensors

The detection of biomolecules using various biosensors with excellent sensitivity, selectivity, stability, and reproducibility, is of great significance in the analytical and biomedical fields toward achieving their practical applications. Noble metal nanoparticles are favorable candidates due to their unique optical, surface electrical effect, and catalytic properties. Among these noble metal nanoparticles, platinum nanoparticles (Pt NPs) have been widely employed for the detection of bioactive substances such as glucose, glutamic acid, and hormones. However, there is still a long way to go before the potential challenges in the practical applications of biomolecules are fully overcome. Bearing this in mind, combined with our research experience, we summarized the recent progress of the Pt NP-based biosensors and highlighted the current problems that exist in their practical applications. The current review would provide fundamental guidance for future applications using the Pt NP-based biosensors in food, agricultural, and medical fields.

Recombinase Polymerase Amplification Coupled with a Photosensitization Colorimetric Assay for Fast Salmonella spp. Testing

Salmonella spp. is one of the most serious foodborne pathogens causing millions of infection cases annually, especially in resource-limited areas. The standard culture method (2-3 days) and current nucleic acid amplification-based testing are not suitable for on-site testing in rural areas with heavy Salmonella spp. burden. Here, we developed a colorimetric recombinase polymerase amplification (RPA) method for fast and sensitive Salmonella spp. testing in 1 h. Specifically, the invA gene from the genomic DNA of Salmonella spp. was amplified isothermally to produce double-stranded DNA (dsDNA) amplicons, which were directly quantified by a photosensitization colorimetric assay. The proposed method offered the lowest detectable concentration of 5 × 10³ colony-forming units/mL (cfu/mL), which is much lower than that of ELISA (10⁵-10⁷ cfu/mL). The detectable limit could be further pushed down to 3 cfu/mL upon coupling with bacteria pre-enrichment for 6 h. Analysis of synthetic milk samples confirmed the high precision (90%) and specificity (95%) of the method for Salmonella spp. testing. Moreover, use of a DNA releaser could further simplify the whole testing operation. Because RPA features low-temperature amplification (25-42 °C) without the need for specific instruments and the dsDNA-based photosensitization colorimetric assay served as a simple and facile readout for RPA, our method thus allows fast and low-cost Salmonella spp. testing in food samples.

Modernization of Control of Pathogenic Micro-Organisms in the Food-Chain Requires a Durable Role for Immunoaffinity-Based Detection Methodology-A Review

Food microbiology is deluged by a vastly growing plethora of analytical methods. This review endeavors to color the context into which methodology has to fit and underlines the importance of sampling and sample treatment. The context is that the highest risk of food contamination is through the animal and human fecal route with a majority of foodborne infections originating from sources in mass and domestic kitchens at the end of the food-chain. Containment requires easy-to-use, failsafe, single-use tests giving an overall risk score in situ. Conversely, progressive food-safety systems are relying increasingly on early assessment of batches and groups involving risk-based sampling, monitoring environment and herd/flock health status, and (historic) food-chain information. Accordingly, responsible field laboratories prefer specificity, multi-analyte, and high-throughput procedures. Under certain etiological and epidemiological circumstances, indirect antigen immunoaffinity assays outperform the diagnostic sensitivity and diagnostic specificity of e.g., nucleic acid sequence-based assays. The current bulk of testing involves therefore ante- and post-mortem probing of humoral response to several pathogens. In this review, the inclusion of immunoglobulins against additional invasive micro-organisms indicating the level of hygiene and ergo public health risks in tests is advocated. Immunomagnetic separation, immunochromatography, immunosensor, microsphere array, lab-on-a-chip/disc platforms increasingly in combination with nanotechnologies, are discussed. The heuristic development of portable and ambulant microfluidic devices is intriguing and promising. Tant pis, many new platforms seem unattainable as the industry standard. Comparability of results with those of reference methods hinders the implementation of new technologies. Whatever the scientific and technological excellence and incentives, the decision-maker determines this implementation after weighing mainly costs and business risks.

Rapid Detection of Salmonella typhimurium in Drinking Water by a White Light Reflectance Spectroscopy Immunosensor

Biosensors represent an attractive approach for fast bacteria detection. Here, we present an optical biosensor for the detection of Salmonella typhimurium lipopolysaccharide (LPS) and Salmonella bacteria in drinking water, based on white light reflectance spectroscopy. The sensor chip consisted of a Si die with a thin SiO₂ layer on top that was transformed into a biosensor through the immobilization of Salmonella LPS. The optical setup included a reflection probe with seven 200 μm fibers, a visible and near-infrared light source, and a spectrometer. The six fibers at the reflection probe circumference were coupled with the light source and illuminated the biosensor chip vertically, whereas the central fiber collected the reflected light and guided it to the spectrometer. A competitive immunoassay configuration was adopted for the analysis. Accordingly, a mixture of LPS or bacteria solution, pre-incubated for 15 min, with an anti-Salmonella LPS antibody was pumped over the chip followed by biotinylated secondary antibody and streptavidin for signal enhancement. The binding of the free anti-Salmonella antibody to chip-immobilized LPS led to a shift of the reflectance spectrum that was inversely related to the analyte concentration (LPS or bacteria) in the calibrators or samples. The total assay duration was 15 min, and the detection limits achieved were 4 ng/mL for LPS and 320 CFU/mL for bacteria. Taking into account the low detection limits, the short analysis time, and the small size of the chip and instrumentation employed, the proposed immunosensor could find wide application for bacteria detection in drinking water.