The potential of anthocyanins in smart, active, and bioactive eco-friendly polymer-based films: A review

Characterisation and Colour Response of Smart Sago Starch-Based Packaging Films Incorporated with Brassica oleracea Anthocyanin

To meet the need for food products to be safe and fresh, smart food packaging that can monitor and give information about the quality of packaged food has been developed. In this study, pH-sensitive films with sago starch and various anthocyanin concentrations of Brassica oleracea also known as red cabbage anthocyanin (RCA) at 8, 10, 12, and 14% (w/v) were manufactured using the solvent casting process. Investigation of the physicochemical, mechanical, thermal, and morphological characteristics of the films was performed and analysed. The response of these materials against pH changes was evaluated with buffers of different pH. When the films were exposed to a series of pH buffers (pH 3, 5, 9, 11, and 13), the RCA-associated films displayed a spectacular colour response. In addition, the ability of the starch matrix to overcome the leaching and release of anthocyanins was investigated. Higher concentrations of RCA can maintain the colour difference of films after being immersed in a series of buffer solutions ranging from acidic to basic conditions. Other than that, incorporating RCA extracts into the starch formulation increased the thickness whereas the water content, swelling degree, tensile strength, and elongation at break decreased as compared to films without RCA. The immobilisation of anthocyanin into the film was confirmed by the FTIR measurements. The surface patterns of films were heterogeneous and irregular due to the presence of RCA extract aggregates, which increased as the extract concentration enhanced. However, this would not affect the properties of films. An increase in thermal stability was noted for the anthocyanin-containing films at the final stage of degradation in TGA analysis. It is concluded that RCA and sago starch formulation has great potential to be explored for food packaging purposes.

An intelligent colorimetric film based on complex anthocyanins and bacterial cellulose nanofibers for tilapia freshness detection in an actual cold chain

An intelligent colorimetric film was developed for the quality detection of tilapia fillets using bacterial cellulose (BC) as a substrate in combination with pelargonidin (Pg), cyanidin (Cy), and delphinium (Dp). The color of the BC-Pg-Cy-Dp film and Pg-Cy-Dp solution changed from rosy to blue-violet at pH 3-10. The mechanical and antioxidant properties of the film were improved after the addition of Pg-Cy-Dp. Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) showed that a new hydrogen bond might be formed between the cellulose chain and the anthocyanin molecule, which increased the density of the film. The BC-Pg-Cy-Dp film displayed a large color difference from rosy to blue-violet when applied to tilapia fillet storage. The changes of K values indicated a good linear relationship with the change in ∆E at 4 °C and 25 °C. In the actual cold chain, the color of the film changed from rosy to purple, which could be identified by the naked eye and indicated that the fish were in the first fresh stage. Thus, the BC-Pg-Cy-Dp film can be used as an intelligent packaging film during storage to monitor the freshness of fish by the naked eye.

Bio-Based pH Indicator Films for Intelligent Food Packaging Applications

The widespread concerns about the environmental problems caused by conventional plastic food packaging and food waste led to a growing effort to develop active and intelligent systems produced from renewable biodegradable polymers for food packaging applications. Among intelligent systems, the most widely used are pH indicators, which are generally based on a pH-sensitive dye incorporated into a solid support. The objective of this study was to develop new intelligent systems based on renewable biodegradable polymers and a new bio-inspired pH-sensitive dye. The structure of the dye was elucidated through FT-IR and 1D and 2D NMR spectroscopic analyses. UV-VIS measurements of the dye solutions at various pH values proved their halochromic properties. Their toxicity was evaluated through theoretical calculations, and no toxicity risks were found. The new anthocyanidin was used for the development of biodegradable intelligent systems based on chitosan blends. The obtained polymeric films were characterized through UV-VIS and FT-IR spectroscopy. Their thermal properties were assessed through a thermogravimetric analysis, which showed a better stability of chitosan–PVA–dye and chitosan–starch–dye films compared to those of chitosan–cellulose–dye films and the dye itself. The films’ sensitivity to pH variations was evaluated through immersion in buffer solutions with pH values ranging from 2 to 12, and visible color changes were observed.

Chitin Nanocrystals Provide Antioxidant Activity to Polylactic Acid Films

About 1/3rd of produced food goes to waste, and amongst others, advanced packaging concepts need to be developed to prevent this from happening. Here, we target the antioxidative functionality of food packaging to thus address food oxidation without the need for the addition of antioxidants to the food product, which is not desirable from a consumer point of view. Chitin nanocrystals (ChNC) have been shown to be promising bio-fillers for improving the mechanical strength of biodegradable plastics, but their potential as active components in plastic films is rather unexplored. In the current study, we investigate the antioxidant activity of chitin nanocrystals as such and as part of polylactic acid (PLA) films. This investigation was conducted using DPPH (1,1-diphenyl-2-picrylhydrazyl) radical scavenging activity. Chitin nanocrystals produced via acid hydrolysis showed five times higher activity compared to crude chitin powder. When using these crystals as part of a polylactic acid film (either inside or on top), in both scenarios, antioxidant activity was found, but the effect was considerably greater when the particles were at the surface of the film. This is an important proof of the principle that it is possible to create biodegradable plastics with additional functionality through the addition of ChNC.

Smart films fabricated from natural pigments for measurement of total volatile basic nitrogen (TVB-N) content of meat for freshness evaluation: A systematic review

Major databases were searched from January 2012 to August 2021 and 54 eligible studies were included in the meta-analysis to estimate the overall mean of total volatile basic nitrogen (TVB-N) in meat. The mean of TVB-N was 24.96 mg/100 g (95 % CI:23.10-26.82). The pooled estimate of naphthoquinone, curcumin, anthocyanins, alizarin and betalains were 25.98 mg/100 g (95 %CI:19.63-32.33), 30.03 mg/100 g (95 %CI: 24.15-35.91), 24.92 mg/100 g (95 %CI: 22.55-27.30), 23.37 mg/100 g (95 %CI:19.42-27.33) and 19.50 mg/100 g (95 %CI:17.87-21.12), respectively. Meanwhile, subgroups based on meat types showed that smart film was most used in aquatic products at 27.19 mg/100 g (95 %CI:24.97-29.42), followed by red meat at 19.69 mg/100 g (95 %CI:17.44-21.94). Furthermore, 4 °C was the most storage temperature used for testing the performance of smart films at 25.48 mg/100 g (95 %CI:23.05-27.90), followed by storage at 25 °C of 25.65 mg/100 g (95 %CI:22.17-29.13). Substantial heterogeneity was found across the eligible studies (I² = 99 %, p = 0.00). The results of the trim-and-fill method demonstrated publication bias was well controlled.

Development of halochromic indicator film based on arrowroot starch/iota-carrageenan using Kyoho skin extract to monitor shrimp freshness

Increasing trends in food safety awareness drive consumer demands for fresher healthier diets and has led to the development of low-cost pH-sensitive indicator films to evaluate deterioration levels in fresh foods. Arrowroot starch/iota-carrageenan-based films were combined with 10, 30, 50% Kyoho skin extract (KSE) to produce indicator films with halochromic abilities. The KSE indicator films were characterized based on their physico-mechanical, functional, and crystallinity properties; thermal stability; and their pH-dependent color changes in in situ anthocyanin-based monitoring of shrimp freshness. All KSE indicator films displayed compact structure under scanning electron microscope analysis and increased tensile strength, exhibited UV-vis barrier ability, and presented low water wettability. Moreover, FTIR signaled strong hydrogen bond interactions among polymers and KSE that strengthened peak crystallinity in XRD analysis and lowered weight loss at melting temperature, which indicated thermal stability of the indicator films. Furthermore, pH-sensitivity of the indicator films integrated with natural KSE anthocyanin demonstrated color changes from purple to red under acidic conditions, purple to green in an ammonium environment, and yellow appeared in high alkaline conditions. Finally, this study demonstrated the food packaging and halochromic capacity of biopolymer-based pH-sensitivity of the KSE indicator films in real-time monitoring of shrimp at room storage temperatures.

Recent Advances in pH-Responsive Freshness Indicators Using Natural Food Colorants to Monitor Food Freshness

Recently, due to the enhancement in consumer awareness of food safety, considerable attention has been paid to intelligent packaging that displays the quality status of food through color changes. Natural food colorants show useful functionalities (antibacterial and antioxidant activities) and obvious color changes due to their structural changes in different acid and alkali environments, which could be applied to detect these acid and alkali environments, especially in the preparation of intelligent packaging. This review introduces the latest research on the progress of pH-responsive freshness indicators based on natural food colorants and biodegradable polymers for monitoring packaged food quality. Additionally, the current methods of detecting food freshness, the preparation methods for pH-responsive freshness indicators, and their applications for detecting the freshness of perishable food are highlighted. Subsequently, this review addresses the challenges and prospects of pH-responsive freshness indicators in food packaging, to assist in promoting their commercial application.

Advancement of Protein- and Polysaccharide-Based Biopolymers for Anthocyanin Encapsulation

Although evidence shows that anthocyanins present promising health benefits, their poor stability still limits their applications in the food industry. Increasing the stability of anthocyanins is necessary to promote their absorption and metabolism and improve their health benefits. Numerous encapsulation approaches have been developed for the targeted release of anthocyanins to retain their bioactivities and ameliorate their unsatisfactory stability. Generally, choosing suitable edible encapsulation materials based on biopolymers is important in achieving the expected goals. This paper presented an ambitious task of summarizing the current understanding and challenges of biopolymer-based anthocyanin encapsulation in detail. The food-grade edible microencapsulation materials, especially for proteins and polysaccharides, should be employed to improve the stability of anthocyanins for effective application in the food industry. The influence factors involved in anthocyanin stability were systematically reviewed and highlighted. Food-grade proteins, especially whey protein, caseinate, gelatin, and soy protein, are attractive in the food industry for encapsulation owing to the improvement of stability and their health benefits. Polysaccharides, such as starch, pectin, chitosan, cellulose, mucilages, and their derivatives, are used as encapsulation materials because of their satisfactory biocompatibility and biodegradability. Moreover, the challenges and perspectives for the application of anthocyanins in food products were presented based on current knowledge. The proposed perspective can provide new insights into the amelioration of anthocyanin bioavailability by edible biopolymer encapsulation.

Quantitative Analysis of Anthocyanins in Grapes by UPLC-Q-TOF MS Combined with QAMS

A method for quantifying the anthocyanins in grapes was firstly developed by ultra-high performance liquid chromatography-quadrupole-time of flight mass spectrometry (UPLC-Q-TOFMS) combined with quantitative analysis of multi-components by single marker (QAMS). A total of 10 main anthocyanins were analyzed by using peonidin 3-O-glucoside as the reference standard. The accuracy of this method was evaluated by an established and validated external standard quantification method with 10 reference compounds. The standard method difference (SMDs) of the quantification results between QAMS and the external standard methodwasless than 15%. Furthermore, the QAMS method was used to analyzefour batches of grapes and the data was compared with those obtained using the external standard method. No significant difference wasobtained in the results obtained by both methods. These results indicated that the QAMS method could accurately determine the anthocyanins in grapes. This method can provide a basis to address the absence of reference standards for analyzing anthocyanins in other foods.

Edible Bioactive Film with Curcumin: A Potential "Functional" Packaging?

Edible packaging has been developed as a biodegradable and non-toxic alternative to traditional petroleum-based food packaging. Biopolymeric edible films, in addition to their passive protective function, may also play a bioactive role as vehicles for bioactive compounds of importance to human health. In recent years, a new generation of edible food packaging has been developed to incorporate ingredients with functional potential that have beneficial effects on consumer health. Curcumin, a bioactive compound widely used as a natural dye obtained from turmeric rhizomes (Curcuma longa L.), has a broad spectrum of beneficial properties for human health, such as anti-inflammatory, anti-hypertensive, antioxidant, anti-cancer, and other activities. To demonstrate these properties, curcumin has been explored as a bioactive agent for the development of bioactive packaging, which can be referred to as functional packaging and used in food. The aim of this review was to describe the current and potential research on the development of functional-edible-films incorporating curcumin for applications such as food packaging.

Active/intelligent packaging films developed by immobilizing anthocyanins from purple sweetpotato and purple cabbage in locust bean gum, chitosan and κ-carrageenan-based matrices

Active/intelligent packaging films were developed by incorporating purple sweetpotato anthocyanins (PSA) and purple cabbage anthocyanins (PCA) in locust bean gum/polyvinyl alcohol (LP), chitosan/polyvinyl alcohol (CP) and κ-carrageenan/polyvinyl alcohol (KP) film matrices. The joint effect of anthocyanins' source and polysaccharides' nature on the structure and functionality of the films was determined. Results showed PSA and PCA interacted with film matrices through hydrogen bonds and/or electrostatic interactions, resulting in improved film uniformity. PSA and PCA did not remarkably alter the water vapor permeability and tensile strength of the films; however, significantly improved the light barrier ability, antioxidant activity, pH-sensitivity and ammonia-sensitivity of films. For the films containing the same anthocyanins (PSA or PCA), LP-based films had relatively higher light barrier ability and storage stability, while CP-based had relatively weaker color changeable ability. When PSA and PCA were immobilized in the same film matrix, the films containing PCA had higher light barrier ability and antioxidant activity than the films containing PSA. Among the films, LP-PCA film exhibited a good potential to monitor the freshness of shrimp. Results suggested the structure and functionality of the films were influenced by the source of anthocyanins and the nature of polysaccharides.

Ornamental Flowers Grown in Human Surroundings as a Source of Anthocyanins with High Anti-Inflammatory Properties

Flowers have always accompanied people thanks to their manifold aesthetic properties. Some species have also become a component of the human diet. Recent years have seen an increased interest in edible flowers and, consequently, research has been undertaken to determine their chemical composition. Dyes that are abundantly contained in flowers, whose role is to attract pollinating animals, are recognized substances with health-promoting properties. Anthocyanins are a group of dyes that are very common in petals and other parts of flowers. Studies carried out in the twentieth and twenty-first century on flowers growing in temperate climates have found very strong antioxidant and anti-inflammatory properties of anthocyanins. Therefore, flowers used by humans for centuries to decorate their surroundings may become an easily available source of nutrients and health-promoting substances. This paper discusses the health-promoting properties of anthocyanins and collects literature on anthocyanin content in edible flowers commonly grown on balconies, terraces, and roofs in countries of temperate climate.

Biochemical Characterization and Effects of Cooking Methods on Main Phytochemicals of Red and Purple Potato Tubers, a Natural Functional Food

Potato is a staple food crop and an important source of dietary energy. Its tubers contain several essential amino acids, vitamins, minerals and phytochemicals that contribute to the nutritional value of this important product. Recently, scientific interest has focused on purple and red potatoes that, due to the presence of anthocyanins, may be considered as natural powerful functional food. The aim of this study was to evaluate the characteristics of pigmented varieties, the types of anthocyanins accumulated and the level of both beneficial phytochemicals (vitamin C and chlorogenic acids, CGAs) and anti-nutritional compounds (glycoalkaloids) following various cooking methods. The analyses described the presence of a mix of several acylated anthocyanins in pigmented tubers along with high level of CGA. The amount of antioxidants was differently affected by heat treatments according to the type of molecule and the cooking methods used. In some cases, the beneficial compounds were made more available by heat treatments for the analytical detection as compared to raw materials. Data reported here describe both the agronomic properties of these pigmented varieties and the effects of food processing methods on bioactive molecules contained in this natural functional food. They may provide useful information for breeders aiming to develop new varieties that could include desirable agronomical and industrial processing traits.

Biological Approaches for Extraction of Bioactive Compounds From Agro-industrial By-products: A Review

Bioactive compounds can provide health benefits beyond the nutritional value and are originally present or added to food matrices. However, because they are part of the food matrices, most bioactive compounds remain in agroindustrial by-products. Agro-industrial by-products are generated in large quantities throughout the food production chain and can—when not properly treated—affect the environment, the profit, and the proper and nutritional distribution of food to people. Thus, it is important to adopt processes that increase the use of these agroindustrial by-products, including biological approaches, which can enhance the extraction and obtention of bioactive compounds, which enables their application in food and pharmaceutical industries. Biological processes have several advantages compared to nonbiological processes, including the provision of extracts with high quality and bioactivity, as well as extracts that present low toxicity and environmental impact. Among biological approaches, extraction from enzymes and fermentation stand out as tools for obtaining bioactive compounds from various agro-industrial wastes. In this sense, this article provides an overview of the main bioactive components found in agroindustrial by-products and the biological strategies for their extraction. We also provide information to enhance the use of these bioactive compounds, especially for the food and pharmaceutical industries.

Cassava-Starch-Based Films Incorporated with Buriti (Mauritia flexuosa L.) Oil: A New Active and Bioactive Material for Food Packaging Applications

The objective of this study was to develop and characterize cassava-starch-based films incorporated with buriti (Mauritia flexuosa L.) oil and emulsifier (Tween 20). An experimental factorial design 22 with three central points was used to develop the films, by varying the concentrations of buriti oil (0.15 to 0.45% w/v) and emulsifier (0.02 to 0.04% w/v). Film thickness and weight increased with increasing buriti oil concentration. The water vapor permeability of the films ranged from 0.22 to 0.366 g mm h−1 m−2 kPa−1. The tensile strength values varied from 4.21 to 6.95 MPa, the elasticity modulus varied from 538.53 to 722.78 MPa, and elongation to rupture varied from 1.13 to 1.66%. The film color was characterized as yellowish, dark, and intense (higher oil content); and clear and a low-intensity color (lower oil content). The films presented a total carotenoid content ranging from 3.63 to 29.73 μg β-carotene/g, which may have resulted in their antioxidant potential against DPPH• (1,1-diphenyl-2-picryl-hydrazyl) radical (from 74.28 to 87.74%). The central formulation of the experimental design (buriti oil 0.30% and emulsifier 0.03%) presented a good performance and can be applied as packaging for foods with a lower water content and that demand protection against oxidation.

Encapsulation of bioactive compounds extracted from plants of genus Hibiscus: A review of selected techniques and applications

The genus Hibiscus includes more than 250 species, and many studies showed that these plants contain bioactive compounds with technological potential to be used in the development of functional foods. However, the instability of these compounds during typical food processing conditions, such as exposure to high temperatures, pH changes and presence of light and oxygen have stimulated the use of encapsulation techniques to increase their stability and applicability. Among the existing Hibiscus species, only H. sabdariffa, H. cannabinus, and H. acetosella have been investigated in encapsulation studies, being spray drying the most common method approached. Considering the high technological potential offered by the incorporation of encapsulated bioactive compounds from plants of the genus Hibiscus in food formulations, this review discusses key information of selected encapsulation techniques, which represents promising alternatives to increase food systems' stability and stimulate the design of new functional foods. Relevant gaps in the literature were also noticed, mainly the lack of systematic studies regarding the composition of bioactive compounds after encapsulation, instead of total determinations, and biological activities in different analytical systems, such as antioxidant, antimicrobial and anti-inflammatory properties as well as bioaccessibility and bioavailability.

Development and characterization of electrospun nanofibers based on pullulan/chitin nanofibers containing curcumin and anthocyanins for active-intelligent food packaging

An electrospun nanofiber based on pullulan/chitin nanofibers (PCN) containing curcumin (CR) and anthocyanins (ATH) was developed using an electrospinning technique for active-intelligent food packaging. The results of scanning electron microscopy and attenuated total reflection Fourier transform infrared spectroscopy indicated that CR and ATH were successfully immobilized on the film-forming substrate based on PCN. The physical and chemical properties of nanofibers with no colorant, a single colorant, and double colorants were compared. The nanofiber containing ATH and CR (PCN/CR/ATH) had stronger antioxidant and antimicrobial activities than those of nanofibers containing CR (PCN/CR) or ATH (PCN/ATH). With respect to pH sensitivity, the color of the PCN/CR nanofibers did not change obviously, but the color of the PCN/ATH and PCN/CR/ATH nanofibers changed significantly with the change in pH. Furthermore, the PCN/CR/ATH nanofibers clearly changed color with the progressive spoilage of Plectorhynchus cinctus at room temperature. Therefore, the electrospun PCN/CR/ATH nanofiber have great application potential in active-intelligent food packaging.