Is prodrug design an approach to increase water solubility?

Recent advances in drug delivery systems for enhancing drug penetration into tumors

The emergence of nanomaterials for drug delivery provides the opportunity to avoid the side effects of systemic drug administration and injury caused by the removal of tumors, delivering great promise for future cancer treatments. However, the efficacy of current nano drugs is not significantly better than that of the original drug treatments. The important reason is that nano drugs enter the tumor vasculature, remaining close to the blood vessels and unable to enter the tumor tissue or tumor cells to complete the drug delivery process. The low efficiency of drug penetration into tumors has become a bottleneck restricting the development of nano-drugs. Herein, we present a systematic overview of recent advances on the design of nano-drug carriers in drug delivery systems for enhancing drug penetration into tumors. The review is organized into four sections: The drug penetration process in tumor tissue includes paracellular and transcellular transport, which is summarized first. Strategies that promote tumor penetration are then introduced, including methods of remodeling the tumor microenvironment, charge inversion, dimensional change, and surface modification of ligands which promote tissue penetration. Conclusion and the prospects for the future development of drug penetration are finally briefly illustrated. The review is intended to provide thoughts for effective treatment of cancer by summarizing strategies for promoting the endocytosis of nano drugs into tumor cells.

Scalable Asymmetric Syntheses of Foslevodopa and Foscarbidopa Drug Substances for the Treatment of Parkinson's Disease

Foslevodopa (FLD, levodopa 4'-monophosphate, 3) and foscarbidopa (FCD, carbidopa 4'-monophosphate, 4) were identified as water-soluble prodrugs of levodopa (LD, 1) and carbidopa (CD, 2), respectively, which are useful for the treatment of Parkinson's disease. Herein, we describe asymmetric syntheses of FLD (3) and FCD (4) drug substances and their manufacture at pilot scale. The synthesis of FLD (3) employs a Horner-Wadsworth-Emmons olefination reaction followed by enantioselective hydrogenation of the double bond as key steps to introduce the α-amino acid moiety with the desired stereochemistry. The synthesis of FCD (4) features a Mizoroki-Heck reaction followed by enantioselective hydrazination to install the quaternary chiral center bearing a hydrazine moiety.

Anthelmintics for drug repurposing: Opportunities and challenges

Drug repositioning is defined as a process to identify a new application for drugs. This approach is critical as it takes advantage of well-known pharmacokinetics, pharmacodynamics, and toxicity profiles of the drugs; thus, the chance of their future failure decreases, and the cost of their development and the required time for their approval are reduced. Anthelmintics, which are antiparasitic drugs, have recently demonstrated promising anticancer effects in vitro and in vivo. This literature review focuses on the potential of anthelmintics for repositioning in the treatment of cancers. It also discusses their pharmacokinetics and pharmacodynamics as antiparasitic drugs, proposed anticancer mechanisms, present development conditions, challenges in cancer therapy, and strategies to overcome these challenges.

Cholinium-based ionic liquids as bioinspired hydrotropes to tackle solubility challenges in drug formulation

Hydrotropy is a well-established strategy to enhance the aqueous solubility of hydrophobic drugs, facilitating their formulation for oral and dermal delivery. However, most hydrotropes studied so far possess toxicity issues and are inefficient, with large amounts being needed to achieve significant solubility increases. Inspired by recent developments in the understanding of the mechanism of hydrotropy that reveal ionic liquids as powerful hydrotropes, in the present work the use of cholinium vanillate, cholinium gallate, and cholinium salicylate to enhance the aqueous solubility of two model drugs, ibuprofen and naproxen, is investigated. It is shown that cholinium vanillate and cholinium gallate are able to increase the solubility of ibuprofen up to 500-fold, while all three ionic liquids revealed solubility enhancements up to 600-fold in the case of naproxen. Remarkably, cholinium salicylate increases the solubility of ibuprofen up to 6000-fold. The results obtained reveal the exceptional hydrotropic ability of cholinium-based ionic liquids to increase the solubility of hydrophobic drugs, even at diluted concentrations (below 1 mol·kg^-1), when compared with conventional hydrotropes. These results are especially relevant in the field of drug formulation due to the bio-based nature of these ionic liquids and their low toxicity profiles. Finally, the solubility mechanism in these novel hydrotropes is shown to depend on synergism between both amphiphilic ions.

Analytical Quality by Design as an Important Tool to Determine the Best Analytical Conditions for Isoniazid and Its Respective Succinylated Prodrug

BACKGROUND

Tuberculosis is a worldwide health concern and isoniazid is the most used and considered one of the most effective drugs for its treatment. The "quality" concept must be incorporated into the final pharmaceutical product, according to the quality by design (QbD) definition. Therefore, the determination of analytical test conditions is extremely important and the design of experiments (DoE) becomes a very useful tool.

OBJECTIVE

This paper used the concept of QbD to assist the development of analytical conditions for isoniazid and its respective prodrug, applying HPLC.

METHOD

HPLC analytical methodologies were developed for isoniazid and its succinylated derivative. The experimental design was carried out using three analytical parameters at three levels. Four chromatographic responses were studied. The impact of analytical parameters on chromatographic responses was assessed using a Pareto chart. Regression models were obtained using multiple regression analysis. DoE analysis was conducted using the Minitab® program and the experiments were performed sequentially, with varying factors.

RESULTS

We identify three main risk parameters: mobile phase (high), flow rate (moderate), and pH of buffer (moderate). The ratio of mobile phase buffer (X2) and mobile phase pH (X3) had a major influence on the peak resolutions (Y3). The capacity factors for iso-suc (Y1) and isoniazid (Y2) peaks should be within 3-9 and 4-10, respectively. The peak resolutions between iso-suc and isoniazid (Y3) should be above two.

CONCLUSIONS

We designed 27 experiments, obtaining 1.0 mL/min flow rate, 95% buffer in the mobile phase, and pH 7.0 as the optimal analytical conditions.

HIGHLIGHTS

Analytical Quality by Design was used as an important tool to determine the best analytical test conditions for isoniazid and its respective prodrug - succinylated isoniazid.

Advances in Oral Drug Delivery

The oral route is the most common route for drug administration. It is the most preferred route, due to its advantages, such as non-invasiveness, patient compliance and convenience of drug administration. Various factors govern oral drug absorption including drug solubility, mucosal permeability, and stability in the gastrointestinal tract environment. Attempts to overcome these factors have focused on understanding the physicochemical, biochemical, metabolic and biological barriers which limit the overall drug bioavailability. Different pharmaceutical technologies and drug delivery systems including nanocarriers, micelles, cyclodextrins and lipid-based carriers have been explored to enhance oral drug absorption. To this end, this review will discuss the physiological, and pharmaceutical barriers influencing drug bioavailability for the oral route of administration, as well as the conventional and novel drug delivery strategies. The challenges and development aspects of pediatric formulations will also be addressed.

Improved Bioavailability and High Photostability of Methotrexate by Spray-Dried Surface-Attached Solid Dispersion with an Aqueous Medium

Low aqueous solubility and poor bioavailability are major concerns in the development of oral solid-dosage drug forms. In this study, we fabricated surface-attached solid dispersion (SASD) to enhance the solubility, bioavailability, and photostability of methotrexate (MTX), a highly lipophilic and photo-unstable drug. Several MTX-loaded SASD formulations were developed for spray-drying using water as the solvent, and were investigated for their aqueous solubility and dissolution kinetics. An optimized ternary SASD formulation composed of MTX/ sodium carboxymethyl cellulose (Na-CMC)/sodium lauryl sulfate (SLS) at 3/0.5/0.5 (w/w) had 31.78-fold and 1.88-fold higher solubility and dissolution, respectively, than MTX powder. For SASD, the in vivo pharmacokinetic parameters AUC and C_max were 2.90- and 3.41-fold higher, respectively, than for the MTX powder. Solid-state characterizations by differential scanning calorimetry and X-ray diffraction revealed that MTX exists in its crystalline state within the spray-dried SASD. The MTX-loaded SASD formulation showed few physical changes with photostability testing. Overall, the results indicate that the spray-dried MTX-loaded SASD formulation without organic solvents enhances the solubility and oral bioavailability of MTX without a significant deterioration of its photochemical stability.

Evaluation of Water-Soluble Mannich Base Prodrugs of 2,3,4,5-Tetrahydroazepino[4,3-b]indol-1(6H)-one as Multitarget-Directed Agents for Alzheimer's Disease

Different Mannich base derivatives have been studied with the aim of addressing the poor aqueous solubility of the recently disclosed 6-phenethyl-2,3,4,5-tetrahydroazepino[4,3-b]indol-1(6H)-one (1), a human butyrylcholinesterase inhibitor (hBChE, IC₅₀ 13 nM) and protective agent in NMDA-induced neurotoxicity, in in vivo assays. The N-(4-methylpiperazin-1-yl)methyl derivative 2 c showed a 50-fold increase in solubility in pH 7.4-buffered solution, high stability in serum and (half-life >24 h) and rapid (<3 min) conversion to 1 at acidic pH. Although less active than 1, 2 c retained moderate hBChE inhibition (IC₅₀ =3.35 μM) and a significant protective effect against NMDA-induced neurotoxicity at 0.1 μM. Moreover, 2 c resulted a weaker serum albumin binder than 1, could pass the blood-brain barrier, and exerted negligible cytotoxicity on HepG2 cells. These findings suggest that 2 c could be a water-soluble prodrug candidate of 1 for oral administration or a slow-release injectable derivative in in vivoAlzheimer's disease models.

Facilitating Drug Discovery in Human Disease Models Using Insects

Drugs are developed through basic studies and clinical trials. In basic studies, researchers seek drug candidates using in vitro evaluation systems and subsequently examine their effectiveness in animal experiments as in vivo evaluations. Drug candidates identified in basic studies are tested to determine whether they are effective against human diseases in clinical trials. However, most drug candidates identified in in vitro evaluation systems do not show therapeutic effects in animal experiments due to pharmacokinetics and toxicity problems in the in vivo evaluations. This review outlines drug discovery using insect disease models that allow us to perform in vivo screening. Since insects have various advantages as experimental animals such as low cost for rearing and few ethical concerns, researchers can perform large-scale in vivo screening to find drug candidates. Silkworms are insects frequently used for studies of drug efficacy, pharmacokinetics, and toxicity. Based on silkworm research, I describe the benefits of using insect disease models for drug discovery. The use of insect disease models for in vivo screening is expected to facilitate drug discovery.

Prodrug Strategies to Improve the Solubility of the HCV NS5A Inhibitor Pibrentasvir (ABT-530)

A research program to discover solubilizing prodrugs of the HCV NS5A inhibitor pibrentasvir (PIB) identified phosphomethyl analog 2 and trimethyl-lock (TML) prodrug 9. The prodrug moiety is attached to a benzimidazole nitrogen atom via an oxymethyl linkage to allow for rapid and complete release of the drug for absorption following phosphate removal by intestinal alkaline phosphatase. These prodrugs have good hydrolytic stability properties and improved solubility compared to PIB, both in aqueous buffer (pH 7) and FESSIF (pH 5). TML prodrug 9 provided superior in vivo performance, delivering high plasma concentrations of PIB in PK studies conducted in mice, dogs, and monkeys. The improved dissolution properties of these phosphate prodrugs provide them the potential to simplify drug dosage forms for PIB-containing HCV therapy.

Insoluble Polymers in Solid Dispersions for Improving Bioavailability of Poorly Water-Soluble Drugs

In recent decades, solid dispersions have been demonstrated as an effective approach for improving the bioavailability of poorly water-soluble drugs, as have solid dispersion techniques that include the application of nanotechnology. Many studies have reported on the ability to change drug crystallinity and molecular interactions to enhance the dissolution rate of solid dispersions using hydrophilic carriers. However, numerous studies have indicated that insoluble carriers are also promising excipients in solid dispersions. In this report, an overview of solid dispersion strategies involving insoluble carriers has been provided. In addition to the role of solubility and dissolution enhancement, the perspectives of the use of these polymers in controlled release solid dispersions have been classified and discussed. Moreover, the compatibility between methods and carriers and between drug and carrier is mentioned. In general, this report on solid dispersions using insoluble carriers could provide a specific approach and/or a selection of these polymers for further formulation development and clinical applications.