Activation of nitrogen for organic synthesis

Low-temperature N2 binding to two-coordinate L2Fe(0) enables reductive trapping of L2FeN2(-) and NH3 generation

The two-coordinate [(CAAC)2Fe] complex [CAAC = cyclic (alkyl)(amino)carbene] binds dinitrogen at low temperature (T<-80 °C). The resulting putative three-coordinate N2 complex, [(CAAC)2Fe(N2)], was trapped by one-electron reduction to its corresponding anion [(CAAC)2FeN2](-) at low temperature. This complex was structurally characterized and features an activated dinitrogen unit which can be silylated at the β-nitrogen atom. The redox-linked complexes [(CAAC)2Fe(I)][BAr(F)4], [(CAAC)2Fe(0)], and [(CAAC)2Fe(-I)N2](-) were all found to be active for the reduction of dinitrogen to ammonia upon treatment with KC8 and HBAr(F)4⋅2 Et2O at -95 °C [up to (3.4±1.0) equivalents of ammonia per Fe center]. The N2 reduction activity is highly temperature dependent, with significant N2 reduction to NH3 only occurring below -78 °C. This reactivity profile tracks with the low temperatures needed for N2 binding and an otherwise unavailable electron-transfer step to generate reactive [(CAAC)2FeN2](-) .

Cu-mediated nitrogen atom transfer via CN bond cleavage

A nitrogen atom transfer to organic molecules affording aryl nitriles via Cu-mediated C–N triple bond cleavage is firstly developed.

Unique behaviour of dinitrogen-bridged dimolybdenum complexes bearing pincer ligand towards catalytic formation of ammonia

It is vital to design effective nitrogen fixation systems that operate under mild conditions, and to this end we recently reported an example of the catalytic formation of ammonia using a dinitrogen-bridged dimolybdenum complex bearing a pincer ligand, where up to twenty three equivalents of ammonia were produced based on the catalyst. Here we study the origin of the catalytic behaviour of the dinitrogen-bridged dimolybdenum complex bearing the pincer ligand with density functional theory calculations, based on stoichiometric and catalytic formation of ammonia from molecular dinitrogen under ambient conditions. Comparison of di- and mono-molybdenum systems shows that the dinitrogen-bridged dimolybdenum core structure plays a critical role in the protonation of the coordinated molecular dinitrogen in the catalytic cycle.

Research into molecular catalysts for conversion of nitrogen into ammonia under mild conditions is ongoing. Here, the authors synthesize a dimolybdenum–nitride complex and verify the role of the dimetallic core in the protonation of the coordinated dinitrogen.

Dinitrogen Cleavage and Hydrogenation by a Trinuclear Titanium Polyhydride Complex

Both the Haber-Bosch and biological ammonia syntheses are thought to rely on the cooperation of multiple metals in breaking the strong N≡N triple bond and forming an N–H bond. This has spurred investigations of the reactivity of molecular multimetallic hydrides with dinitrogen. We report here the reaction of a trinuclear titanium polyhydride complex with dinitrogen, which induces dinitrogen cleavage and partial hydrogenation at ambient temperature and pressure. By 1H and 15N nuclear magnetic resonance, x-ray crystallographic, and computational studies of some key reaction steps and products, we have determined that the dinitrogen (N2) reduction proceeds sequentially through scission of a N2 molecule bonded to three Ti atoms in a μ-η1:η2:η2-end-on-side-on fashion to give a μ2-N/μ3-N dinitrido species, followed by intramolecular hydrogen migration from Ti to the μ2-N nitrido unit.

Synthesis of diamidopyrrolyl molybdenum complexes relevant to reduction of dinitrogen to ammonia

A potentially useful trianionic ligand for the reduction of dinitrogen catalytically by molybdenum complexes is one in which one of the arms in a [(RNCH(2)CH(2))(3)N](3-) ligand is replaced by a 2-mesitylpyrrolyl-alpha-methyl arm, that is, [(RNCH(2)CH(2))(2)NCH(2)(2-MesitylPyrrolyl)](3-) (R = C(6)F(5), 3,5-Me(2)C(6)H(3), or 3,5-t-Bu(2)C(6)H(3)). Compounds have been prepared that contain the ligand in which R = C(6)F(5) ([C(6)F(5)N)(2)Pyr](3-)); they include [(C(6)F(5)N)(2)Pyr]Mo(NMe(2)), [(C(6)F(5)N)(2)Pyr]MoCl, [(C(6)F(5)N)(2)Pyr]MoOTf, and [(C(6)F(5)N)(2)Pyr]MoN. Compounds that contain the ligand in which R = 3,5-t-Bu(2)C(6)H(3) ([Ar(t-Bu)N)(2)Pyr](3-)) include {[(Ar(t-Bu)N)(2)Pyr]Mo(N(2))}Na(15-crown-5), {[(Ar(t-Bu)N)(2)Pyr]Mo(N(2))}[NBu(4)], [(Ar(t-Bu)N)(2)Pyr]Mo(N(2)) (nu(NN) = 2012 cm(-1) in C(6)D(6)), {[(Ar(t-Bu)N)(2)Pyr]Mo(NH(3))}BPh(4), and [(Ar(t-Bu)N)(2)Pyr]Mo(CO). X-ray studies are reported for [(C(6)F(5)N)(2)Pyr]Mo(NMe(2)), [(C(6)F(5)N)(2)Pyr]MoCl, and [(Ar(t-Bu)N)(2)Pyr]MoN. The [(Ar(t-Bu)N)(2)Pyr]Mo(N(2))(0/-) reversible couple is found at -1.96 V (in PhF versus Cp(2)Fe(+/0)), but the [(Ar(t-Bu)N)(2)Pyr]Mo(N(2))(+/0) couple is irreversible. Reduction of {[(Ar(t-Bu)N)(2)Pyr]Mo(NH(3))}BPh(4) under Ar at approximately -1.68 V at a scan rate of 900 mV/s is not reversible. Ammonia in [(Ar(t-Bu)N)(2)Pyr]Mo(NH(3)) can be substituted for dinitrogen in about 2 h if 10 equiv of BPh(3) are present to trap the ammonia that is released. [(Ar(t-Bu)N)(2)Pyr]Mo-N=NH is a key intermediate in the proposed catalytic reduction of dinitrogen that could not be prepared. Dinitrogen exchange studies in [(Ar(t-Bu)N)(2)Pyr]Mo(N(2)) suggest that steric hindrance by the ligand may be insufficient to protect decomposition of [(Ar(t-Bu)N)(2)Pyr]Mo-N=NH through a variety of pathways. Three attempts to reduce dinitrogen catalytically with [(Ar(t-Bu)N)(2)Pyr]Mo(N) as a "catalyst" yielded an average of 1.02 +/- 0.12 equiv of NH(3).

Theoretical studies of structure, function and reactivity of molecules--a personal account

Last few decades theoretical/computational studies of structure, function and reactivity of molecules have been contributing significantly in chemistry by explanation of experimental results, better understanding of underlying principles and prediction of the unknown experimental outcome. Accuracy needed in chemistry has long been established, but due to high power dependency of such accurate methods on the molecular size, it has been a major challenge to apply theoretical methods to large molecular systems. In the present article we will review some examples of such applications. One is theoretical study of growth/formation of carbon nanostructures such as fullerenes and carbon nanotubes, using quantum mechanical molecular dynamics method. For growth of single walled carbon nanotube from transition metal cluster, we have demonstrated continued growth of attached nanotube, cap formation and growth from small carbon fragments. For homogeneous catalysis we presented results of studies on N(2) activation by Zr complexes. For biomolecular reactions we use active site and protein models and show that in some catalyses the protein environment is involved in reactions and changes the preferred pathway, and in some other case the effect is modest. The review is concluded with a perspective.

Why [(η5-C5MenH5-n)2Ti]2(μ2,η2,η2-N2) Can Not Add a H2 Molecule to the Side-On-Coordinated N2 while Its Zr and Hf Analogues Can? Insights from Computational Studies

The potential energy surface of the reaction [(eta5-C5MenH5-n)2M]2(micro2,eta2,eta2-N2) + H2 --> [(eta5-C5MenH5-n)2M][(eta5-C5MenH5-n)2MH](micro2,eta2,eta2-NNH) at low-lying singlet and triplet electronic states of the reactants was investigated using density functional methods, for n = 0 and 4, and M = Ti, Zr, and Hf. Ground electronic states of the Ti complexes are found to be triplet states, while that for the corresponding Zr and Hf complexes are singlet states. In their singlet state, all these complexes satisfy known necessary conditions (they have a side-on-coordinated N2 molecule and appropriate frontier orbitals) for successful addition of an H2 molecule to the coordinated N2, and consequently, add of an H2 molecule with a reasonable energy barrier. Hf complexes show slightly higher reactivity than corresponding Zr complexes, and in turn, both are more reactive than their singlet-state Ti counterparts. The calculated trend in reactivity of Zr and Hf complexes is consistent with the latest experimental data (see refs 13 and 16). However, Ti complexes have the ground triplet state that lacks in appropriate frontier orbitals. As a result, H2 addition to the Ti complexes at their triplet ground states requires a larger activation barrier than the singlet state and is endothermic (lacks of driven force for reaction). On the basis of these results, we predict that the [(eta5-C5Me4H)2M]2(micro2,eta2,eta2-N2) and [(eta5-C5H5)2M]2(micro2,eta2,eta2-N2) complexes cannot react with an H2 molecule for M = Ti, while those for M = Zr and Hf can. It was shown that the difference in the B3LYP (hybrid) and PBE (nonhybrid) calculated energy gaps between the lowest closed-shell singlet and triplet states of the present complexes reduces via first- > second- > third-row transition metals; both hybrid and nonhybrid density functionals can be safely used to describe reactivity of the low-lying low-spin and high-spin states of second- and third-row transition metal complexes.

Diazene dehydrogenation follows H2 addition to coordinated dinitrogen in an ansa-zirconocene complex

An activated side-on-bound ansa-zirconocene dinitrogen complex, [Me2Si(eta5-C5Me4)(eta5-C5H3-3-tBu)Zr]2(mu2,eta2,eta2-N2), has been prepared by sodium amalgam reduction of the corresponding dichloride precursor under an atmosphere of N2. Both solution spectroscopic and X-ray diffraction data establish diastereoselective formation of the syn homochiral dizirconium dimer. Addition of 1 atm of H2 resulted in rapid hydrogenation of the N2 ligand to yield one diastereomer of the hydrido zirconocene diazenido complex. Kinetic measurements have yielded the barrier for H2 addition and in combination with isotopic labeling studies are consistent with a 1,2-addition pathway. In the absence of H2, the hydrido zirconocene diazenido product undergoes swift diazene dehydrogenation to yield an unusual hydrido zirconocene dinitrogen complex. The N=N bond length of 1.253(5) A determined by X-ray crystallography indicates that the side-on-bound N2 ligand is best described as a two-electron reduced [N2]2- fragment. Comparing the barrier for deuterium exchange with [Me2Si(eta5-C5Me4)(eta5-C5H3-3-tBu)ZrH]2(mu2,eta2,eta2-N2H2) to diazene dehydrogenation is consistent with rapid 1,2-elimination of dihydrogen followed by rate-determining hydride migration to the zirconium. This mechanistic proposal is also corroborated by H2 inhibition and the observation of a normal, primary kinetic isotope effect for dehydrogenation.

Does Dinitrogen Hydrogenation Follow Different Mechanisms for [(η5-C5Me4H)2Zr]2(μ2,η2,η2-N2) and {[PhP(CH2SiMe2NSiMe2CH2)PPh]Zr}2(μ2,η2,η2-N2) Complexes? A Computational Study

The mechanisms of dinitrogen hydrogenation by two different complexes--[(eta(5)-C(5)Me(4)H)(2)Zr](2)(mu(2),eta(2),eta(2)-N(2)), synthesized by Chirik and co-workers [Nature 2004, 427, 527], and {[P(2)N(2)]Zr}(2)(mu(2),eta(2),eta(2)-N(2)), where P(2)N(2) = PhP(CH(2)SiMe(2)NSiMe(2)CH(2))(2)PPh, synthesized by Fryzuk and co-workers [Science 1997, 275, 1445]--are compared with density functional theory calculations. The former complex is experimentally known to be capable of adding more than one H(2) molecule to the side-on coordinated N(2) molecule, while the latter does not add more than one H(2). We have shown that the observed difference in the reactivity of these dizirconium complexes is caused by the fact that the former ligand environment is more rigid than the latter. As a result, the addition of the first H(2) molecule leads to two different products: a non-H-bridged intermediate for the Chirik-type complex and a H-bridged intermediate for the Fryzuk-type complex. The non-H-bridged intermediate requires a smaller energy barrier for the second H(2) addition than the H-bridged intermediate. We have also examined the effect of different numbers of methyl substituents in [(eta(5)-C(5)Me(n)H(5)(-)(n))(2)Zr](2)(mu(2),eta(2),eta(2)-N(2)) for n = 0, 4, and 5 (n = 5 is hypothetical) and [(eta(5)-C(5)H(2)-1,2,4-Me(3))(eta(5)-C(5)Me(5))(2)Zr](2)(mu(2),eta(2),eta(2)-N(2)) and have shown that all complexes of this type would follow a similar H(2) addition mechanism. We have also performed an extensive analysis on the factors (side-on coordination of N(2) to two Zr centers, availability of the frontier orbitals with appropriate symmetry, and inflexibility of the catalyst ligand environment) that are required for successful hydrogenation of the coordinated dinitrogen.

N−C Bond Formation Promoted by a Hafnocene Dinitrogen Complex: Comparison of Zirconium and Hafnium Congeners

Nitrogen-carbon bond formation from coordinated dinitrogen has been observed upon addition of 2 equiv of PhNCO to the hafnocene dinitrogen complex, [(eta5-C5Me4H)2Hf]2(mu2,eta2,eta2-N2). The resulting product most likely arises from initial N=C cycloaddition of the first equivalent of heterocumulene, followed by carbonyl insertion of a second equivalent into the newly formed hafnium-nitrogen bond. The resulting product has considerable hafnium imido character, as evidenced by the metrical parameters determined from the solid-state structure as well as reactivity studies, whereby PhNCO, p-tolyl isocyanate, and t-BuCCH each undergo cycloaddition with the hafnium-nitrogen bond. The origin of the nitrogen-carbon-forming chemistry is likely derived from the reluctance of the hafnocene dinitrogen complex to undergo ligand-induced N2 isomerization, as was observed with the zirconium congener.