New insights to primary photodynamic effects – Singlet oxygen kinetics in living cells

Luminescence spectroscopy of singlet oxygen enables monitoring of oxygen consumption in biological systems consisting of fatty acids

The interaction of singlet oxygen ((1)O2) generated in a photosensitized process with well-known reference photosensitizers Perinaphthenone (PN) and TMPyP is investigated in a model system consisting of fatty acids and the respective exogenous photosensitizer (PS) in solution by direct detection of the luminescence photons of (1)O2 at 1270 nm. Such a model system is a first approach to mimic the complex environment of (1)O2 in a biological cell which consists mainly of water, proteins, sugars and lipids. Firstly, the important issue of oxygen consumption is evaluated which has to be considered during luminescence detection of (1)O2. It is known that the luminescence signal of (1)O2 is dependent on the oxygen concentration of the environment. Cellular components such as lipids represent oxygen consumers due to peroxidation of their unsaturated double bonds. Secondly, the experimental conditions for this model system regarding oxygen consumption are optimized to estimate the rates and rate constants of the coupled system. Thirdly, the triplet decay of the PS can provide more precise information about the actual oxygen concentration close to the PS and can be used, therefore, as a more precise method to determine the oxygen concentration in more complex systems such as a biological cell. The aim is to get a better understanding of photosensitized reactions of (1)O2 with cellular components to further improve methodologies, in particular at a cellular level using luminescence spectroscopy. In conclusion, luminescence detection might be a helpful tool to monitor precisely and promptly changes in oxygen concentration in a complex environment.

Toward a 3D cellular model for studying in vitro the outcome of photodynamic treatments: accounting for the effects of tissue complexity

Clinical therapies have traditionally been developed using two-dimensional (2D) cell culture systems, which fail to accurately capture tissue complexity. Therefore, three-dimensional (3D) cell cultures are more attractive platforms to integrate multiple cues that arise from the extracellular matrix and cells, closer to an in vivo scenario. Here we report the development of a 3D cellular model for the in vitro assessment of the outcome of oxygen- and drug-dependent therapies, exemplified by photodynamic therapy (PDT). Using a synthetic self-assembling peptide as a cellular scaffold (RAD16-I), we were able to recreate the in vivo limitation of oxygen and drug diffusion and its biological effect, which is the development of cellular resistance to therapy. For the first time, the production and decay of the cytotoxic species singlet oxygen could be observed in a 3D cell culture. Results revealed that the intrinsic mechanism of action is maintained in both systems and, hence, the dynamic mass transfer effects accounted for the major differences in efficacy between the 2D and 3D models. We propose that this methodological approach will help to improve the efficacy of future oxygen- and drug-dependent therapies such as PDT.

Efficient induction of apoptosis in HeLa cells by a novel cationic porphycene photosensitizer

In the present study we analyze the photobiological properties of 2,7,12-tris(α-pyridinio-p-tolyl)-17-(p-(methoxymethyl)phenyl) porphycene (Py3MeO-TBPo) in Hela cells, in order to assess its potential as a new photosensitizer for photodynamic therapy of cultured tumor cells. Using 0.5 μM Py3MeO-TBPo, flow cytometry studies demonstrated an increase of intracellular drug levels related to the incubation time, reaching a maximum at 18 h. LysoTracker(®) Green (LTG) and MitoTracker(®) Green (MTG) probes were used to identify the subcellular localization. Upon exposure to ultraviolet excitation, red porphycene fluorescence was detected as red granules in the cytoplasm that colocalized with LTG. No significant toxic effects were detected for Py3MeO-TBPo in the dark at concentrations below 1 μM. In contrast, Py3MeO-TBPo combined with red-light irradiation induced concentration- and fluence-dependent HeLa cells inactivation. Besides, all photodynamic protocols assayed induced a clear effect of cell detachment inhibition after trypsin treatment. Both apoptotic and necrotic cell death mechanisms can occur in HeLa cells depending on the experimental protocol. After 18 h incubation with 0.5 μM Py3MeO-TBPo and subsequent red light irradiation (3.6 J/cm(2)), a high number of cells die by apoptosis, as evaluated by morphological alterations, immunofluorescent relocalization of Bax from cytosol to mitochondria, and TUNEL assay. Likewise, immunofluorescence techniques showed that cytochrome c is released from mitochondria into cytosol in cells undergoing apoptosis, which occurs immediately after relocation of Bax in mitochondria. The highest amount of apoptosis appeared 24 h after treatment (70%) and this cell death occurred without cell detachment to the substrate. In contrast, with 0.75 μM Py3MeO-TBPo and 3.6 J/cm(2) irradiation, morphological changes showed a preferential necrotic cell death. Singlet oxygen was identified as the cytotoxic agent involved in cell photoinactivation. Moreover, cell cultures pre-exposed to the singlet oxygen scavenger sodium azide showed pronounced protection against the loss of viability induced by Py3MeO-TBPo and light. Different changes in distribution and organization of cytoskeletal elements (microtubules and actin microfilaments) as well as the protein vinculin, after apoptotic and necrotic photodynamic treatments have been analyzed. Neither of these two cell death mechanisms (apoptosis or necrosis) induced cell detachment. In summary, Py3MeO-TBPo appears to meet the requirements for further scrutiny as a very good photosensitizer for photodynamic therapy: it is water soluble, has a high absorption in the red spectral region (where light penetration in tissue is higher), and is able to induce effective high apoptotic rate (70%) related to the more widely studied photosensitizers.

In vivo targeted deep-tissue photodynamic therapy based on near-infrared light triggered upconversion nanoconstruct

Two major challenges of current photodynamic therapy (PDT) are the limited tissue penetration of excitation light and poor tumor-selectivity of the photosensitizer (PS). To address these issues, we developed a multifunctional nanoconstruct consisting of upconversion nanoparticles (UCNPs) that transform near-infrared (NIR) light to visible light and a photosensitizer zinc(II) phthalocyanine (ZnPc). Folate-modified amphiphilic chitosan (FASOC) was coated on the surface of UCNPs to anchor the ZnPc close to the UCNPs, thereby facilitating resonance energy transfer from UCNPs to ZnPc. Confocal microscopy and NIR small animal imaging demonstrated the enhanced tumor-selectivity of the nanoconstructs to cancer cells that overexpressed folate receptor. Reactive oxygen species (ROS) generation in cancer cells under a 1-cm tissue was higher upon excitation of UCNPs with the 980 nm light than that with 660 nm irradiation. In vivo PDT treatments for deep-seated tumors demonstrated that NIR light-triggered PDT based on the nanoconstructs possessed remarkable therapeutic efficacy with tumor inhibition ratio up to 50% compared with conventional visible light-activated PDT with a noticeable reduced tumor inhibition ratio of 18%. These results indicate that the multifunctional nanoconstruct is a promising PDT agent for deep-seated tumor treatment and demonstrate a new paradigm for enhancing PDT efficacy.

Reactive Oxygen Species, Oxidative Damage, and Antioxidative Defense Mechanism in Plants under Stressful Conditions

Reactive oxygen species (ROS) are produced as a normal product of plant cellular metabolism. Various environmental stresses lead to excessive production of ROS causing progressive oxidative damage and ultimately cell death. Despite their destructive activity, they are well-described second messengers in a variety of cellular processes, including conferment of tolerance to various environmental stresses. Whether ROS would serve as signaling molecules or could cause oxidative damage to the tissues depends on the delicate equilibrium between ROS production, and their scavenging. Efficient scavenging of ROS produced during various environmental stresses requires the action of several nonenzymatic as well as enzymatic antioxidants present in the tissues. In this paper, we describe the generation, sites of production and role of ROS as messenger molecules as well as inducers of oxidative damage. Further, the antioxidative defense mechanisms operating in the cells for scavenging of ROS overproduced under various stressful conditions of the environment have been discussed in detail.

Insights into photodynamic therapy dosimetry: simultaneous singlet oxygen luminescence and photosensitizer photobleaching measurements

Photodynamic therapy (PDT) is generally based on the generation of highly reactive singlet oxygen ((1)O(2)) through interactions of photosensitizer, light, and oxygen ((3)O(2)). These three components are highly interdependent and dynamic, resulting in variable temporal and spatial (1)O(2) dose deposition. Robust dosimetry that accounts for this complexity could improve treatment outcomes. Although the 1270 nm luminescence emission from (1)O(2) provides a direct and predictive PDT dose metric, it may not be clinically practical. We used (1)O(2) luminescence (or singlet oxygen luminescence (SOL)) as a gold-standard metric to evaluate potentially more clinically feasible dosimetry based on photosensitizer bleaching. We performed in vitro dose-response studies with simultaneous SOL and photosensitizer fluorescence measurements under various conditions, including variable (3)O(2), using the photosensitizer meta-tetra(hydroxyphenyl)chlorin (mTHPC). The results show that SOL was always predictive of cytotoxicity and immune to PDT's complex dynamics, whereas photobleaching-based dosimetry failed under hypoxic conditions. However, we identified a previously unreported 613 nm emission from mTHPC that indicates critically low (3)O(2) levels and can be used to salvage photobleaching-based dosimetry. These studies improve our understanding of PDT processes, demonstrate that SOL is a valuable gold-standard dose metric, and show that when used judiciously, photobleaching can serve as a surrogate for (1)O(2) dose.

Irradiation- and sensitizer-dependent changes in the lifetime of intracellular singlet oxygen produced in a photosensitized process

Singlet oxygen, O(2)(a(1)Δ(g)), was produced upon pulsed-laser irradiation of an intracellular photosensitizer and detected by its 1275 nm O(2)(a(1)Δ(g)) → O(2)(X(3)Σ(g)(-)) phosphorescence in time-resolved experiments using (1) individual mammalian cells on the stage of a microscope and (2) suspensions of mammalian cells in a 1 cm cuvette. Data were recorded using hydrophilic and, independently, hydrophobic sensitizers. The microscope-based single cell results are consistent with a model in which the behavior of singlet oxygen reflects the environment in which it is produced; nevertheless, the data also indicate that a significant fraction of a given singlet oxygen population readily crosses barriers between phase-separated intracellular domains. The singlet oxygen phosphorescence signals reflect the effects of singlet-oxygen-mediated damage on cell components which, at the limit, mean that data were collected from dead cells and, in some cases, reflect contributions from both intracellular and extracellular populations of singlet oxygen. Despite the irradiation-induced changes in the environment to which singlet oxygen is exposed, the "inherent" intracellular lifetime of singlet oxygen does not appear to change appreciably as the cell progresses toward death. The results obtained from cell suspensions reflect key features that differentiate cell ensemble from single cell experiments (e.g., the ensemble experiment is more susceptible to the effects of sensitizer that has leaked out of the cell). Overall, the data clearly indicate that measuring the intracellular lifetime of singlet oxygen in a O(2)(a(1)Δ(g)) → O(2)(X(3)Σ(g)(-)) phosphorescence experiment is a challenging endeavor that involves working with a dynamic system that is perturbed during the measurement. The most important aspect of this study is that it establishes a useful framework through which future singlet oxygen data from cells can be interpreted.

Measurement of singlet-oxygen in vivo: progress and pitfalls

This article is a highlight of the paper by Jarvi et al. in this issue of Photochemistry and Photobiology as well as a brief overview of the state of the field of singlet-oxygen ((1) O(2) ) detection in vivo. The in vivo detection of (1) O(2) using its characteristic 1270 nm phosphorescence is technically challenging. Nevertheless, substantial progress has been made in this area. Major advances have included the commercial development of photomultiplier tubes sensitive to 1270 nm light, techniques for spatially resolving the location of (1) O(2) at a subcellular level and more complex mathematical models for interpreting the kinetics of (1) O(2) emission from living cells. It is now recognized that oxygen consumption, photosensitizer bleaching, oxidation of biological molecules and diffusion of (1) O(2) can significantly change the kinetics of (1) O(2) emission from living cells.