Conductive Hydrogel- and Organohydrogel-Based Stretchable Sensors

Cellulose-Based Ionic Conductor: An Emerging Material toward Sustainable Devices

Ionic conductors (ICs) find widespread applications across different fields, such as smart electronic, ionotronic, sensor, biomedical, and energy harvesting/storage devices, and largely determine the function and performance of these devices. In the pursuit of developing ICs required for better performing and sustainable devices, cellulose appears as an attractive and promising building block due to its high abundance, renewability, striking mechanical strength, and other functional features. In this review, we provide a comprehensive summary regarding ICs fabricated from cellulose and cellulose-derived materials in terms of fundamental structural features of cellulose, the materials design and fabrication techniques for engineering, main properties and characterization, and diverse applications. Next, the potential of cellulose-based ICs to relieve the increasing concern about electronic waste within the frame of circularity and environmental sustainability and the future directions to be explored for advancing this field are discussed. Overall, we hope this review can provide a comprehensive summary and unique perspectives on the design and application of advanced cellulose-based ICs and thereby encourage the utilization of cellulosic materials toward sustainable devices.

Hydrogel fibers for wearable sensors and soft actuators

Owing to superior softness, wetness, responsiveness, and biocompatibility, bulk hydrogels are being intensively investigated for versatile functions in devices and machines including sensors, actuators, optics, and coatings. The one-dimensional (1D) hydrogel fibers possess the metrics from both the hydrogel materials and structural topology, endowing them with extraordinary mechanical, sensing, breathable and weavable properties. As no comprehensive review has been reported for this nascent field, this article aims to provide an overview of hydrogel fibers for soft electronics and actuators. We first introduce the basic properties and measurement methods of hydrogel fibers, including mechanical, electrical, adhesive, and biocompatible properties. Then, typical manufacturing methods for 1D hydrogel fibers and fibrous films are discussed. Next, the recent progress of wearable sensors (e.g., strain, temperature, pH, and humidity) and actuators made from hydrogel fibers is discussed. We conclude with future perspectives on next-generation hydrogel fibers and the remaining challenges. The development of hydrogel fibers will not only provide an unparalleled one-dimensional characteristic, but also translate fundamental understanding of hydrogels into new application boundaries.

Bioinspired Stretchable MXene Deformation-Insensitive Hydrogel Temperature Sensors for Plant and Skin Electronics

Temperature sensing is of high value in the wearable healthcare, robotics/prosthesis, and noncontact physiological monitoring. However, the common mechanic deformation, including pressing, bending, and stretching, usually causes undesirable feature size changes to the inner conductive network distribution of temperature sensors, which seriously influences the accuracy. Here, inspired by the transient receptor potential mechanism of biological thermoreceptors that could work precisely under various skin contortions, we propose an MXene/Clay/poly(N-isopropylacrylamide) (PNIPAM) (MCP) hydrogel with high stretchability, spike response, and deformation insensitivity. The dynamic spike response is triggered by the inner conductive network transformation from the 3-dimensional structure to the 2-dimensional surface after water being discharged at the threshold temperature. The water discharge is solely determined by the thermosensitivity of PNIPAM, which is free from mechanical deformation, so the MCP hydrogels can perform precise threshold temperature (32 °C) sensing under various deformation conditions, i.e., pressing and 15% stretching. As a proof of concept, we demonstrated the applications in plant electronics for the real-time surface temperature monitoring and skin electronics for communicating between human and machines. Our research opens venues for the accurate temperature-threshold sensation on the complicated surface and mechanical conditions.

Continuous contractile force and electrical signal recordings of 3D cardiac tissue utilizing conductive hydrogel pillars on a chip

Heart-on-chip emerged as a potential tool for cardiac tissue engineering, recapitulating key physiological cues in cardiac pathophysiology. Controlled electrical stimulation and the ability to provide directly analyzed functional readouts are essential to evaluate the physiology of cardiac tissues in the heart-on-chip platforms. In this scenario, a novel heart-on-chip platform integrating two soft conductive hydrogel pillar electrodes was presented here. Human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) and cardiac fibroblasts were seeded into the apparatus to create 3D human cardiac tissues. The application of electrical stimulation improved functional performance by altering the dynamics of tissue structure and contractile development. The contractile forces that cardiac tissues contract was accurately measured through optical tracking of hydrogel pillar displacement. Furthermore, the conductive properties of hydrogel pillars allowed direct and non-invasive electrophysiology studies, enabling continuous monitoring of signal changes in real-time while dynamically administering drugs to the cardiac tissues, as shown by a chronotropic reaction to isoprenaline and verapamil. Overall, the platform for acquiring contractile force and electrophysiological signals in situ allowed monitoring the tissue development trend without interrupting the culture process and could have diverse applications in preclinical drug testing, disease modeling, and therapeutic discovery.

H-bond interaction traps vibrating fluorophore in polyurethane matrix for bifunctional environmental monitoring

A simple strategy is presented for the bifunctional detection of environmental organic vapor and temperature by utilizing H-bond interactions to trap a butterfly-vibration-based fluorophore (DPAC-OH) in a polyurethane (PU) matrix. The method opens up a new path for large-scale environmental inspections and the design of dual-response luminescent materials.

Functionalized Hydrogel-Based Wearable Gas and Humidity Sensors

Breathing is an inherent human activity; however, the composition of the air we inhale and gas exhale remains unknown to us. To address this, wearable vapor sensors can help people monitor air composition in real time to avoid underlying risks, and for the early detection and treatment of diseases for home healthcare. Hydrogels with three-dimensional polymer networks and large amounts of water molecules are naturally flexible and stretchable. Functionalized hydrogels are intrinsically conductive, self-healing, self-adhesive, biocompatible, and room-temperature sensitive. Compared with traditional rigid vapor sensors, hydrogel-based gas and humidity sensors can directly fit human skin or clothing, and are more suitable for real-time monitoring of personal health and safety. In this review, current studies on hydrogel-based vapor sensors are investigated. The required properties and optimization methods of wearable hydrogel-based sensors are introduced. Subsequently, existing reports on the response mechanisms of hydrogel-based gas and humidity sensors are summarized. Related works on hydrogel-based vapor sensors for their application in personal health and safety monitoring are presented. Moreover, the potential of hydrogels in the field of vapor sensing is elucidated. Finally, the current research status, challenges, and future trends of hydrogel gas/humidity sensing are discussed.

A high-strength, environmentally stable, and recyclable starch/PVA organohydrogel electrolyte for flexible all-solid-state supercapacitor

Hydrogel electrolytes have shown great promise in the field of flexible energy storage. However, the conventional hydrogel electrolytes have poor mechanical properties and are not recyclable. In addition, conventional hydrogel electrolytes cannot adapt to low and high temperature operating environments. In this study, starch/PVA/dimethyl sulfoxide/CaCl₂ (SPDC) organohydrogel was prepared by the freezing-thawing method. Dimethyl sulfoxide (DMSO) and CaCl₂ was introduced to enhance the mechanical properties and widen the working temperature range of the starch/PVA hydrogel. The SPDC organohydrogel had high strength, toughness and good recyclability. The SPDC organohydrogel and the recycled SPDC organohydrogel was used as the electrolyte to assemble the flexible supercapacitor with activated carbon as the electrode. The supercapacitor prepared by SPDC organohydrogel electrolyte exhibited high areal capacitance of 156.50 mF/cm² at a current density of 1 mA/cm² and high capacitance retention rate of 82.23 % after 8000 cycles of charging and discharging. The supercapacitor prepared by the recycled organohydrogel electrolyte exhibited a high capacitance retention rate of 97.58 %. In addition, the supercapacitor could withstand different angular bending shapes and had wide temperature adaptability from -20 °C to 80 °C. The work provided a new version for the development of "green" hydrogel electrolyte for all-solid-state supercapacitor.

Engineering Smart Composite Hydrogels for Wearable Disease Monitoring

Growing health awareness triggers the public's concern about health problems. People want a timely and comprehensive picture of their condition without frequent trips to the hospital for costly and cumbersome general check-ups. The wearable technique provides a continuous measurement method for health monitoring by tracking a person's physiological data and analyzing it locally or remotely. During the health monitoring process, different kinds of sensors convert physiological signals into electrical or optical signals that can be recorded and transmitted, consequently playing a crucial role in wearable techniques. Wearable application scenarios usually require sensors to possess excellent flexibility and stretchability. Thus, designing flexible and stretchable sensors with reliable performance is the key to wearable technology. Smart composite hydrogels, which have tunable electrical properties, mechanical properties, biocompatibility, and multi-stimulus sensitivity, are one of the best sensitive materials for wearable health monitoring. This review summarizes the common synthetic and performance optimization strategies of smart composite hydrogels and focuses on the current application of smart composite hydrogels in the field of wearable health monitoring.

Recent Development of Self-Powered Tactile Sensors Based on Ionic Hydrogels

Hydrogels are three-dimensional polymer networks with excellent flexibility. In recent years, ionic hydrogels have attracted extensive attention in the development of tactile sensors owing to their unique properties, such as ionic conductivity and mechanical properties. These features enable ionic hydrogel-based tactile sensors with exceptional performance in detecting human body movement and identifying external stimuli. Currently, there is a pressing demand for the development of self-powered tactile sensors that integrate ionic conductors and portable power sources into a single device for practical applications. In this paper, we introduce the basic properties of ionic hydrogels and highlight their application in self-powered sensors working in triboelectric, piezoionic, ionic diode, battery, and thermoelectric modes. We also summarize the current difficulty and prospect the future development of ionic hydrogel self-powered sensors.

High strength, anti-freezing and conductive silkworm excrement cellulose-based ionic hydrogel with physical-chemical double cross-linked for pressure sensing

Recently, ionic conductive hydrogels have attracted extensive attention in the field of flexible pressure sensors due to their mechanical flexibility and high conductivity. However, the trade-off between the high electrical and mechanical properties of ionic conductive hydrogels and the loss of mechanical and electrical properties of traditional high water content hydrogels at low temperature are still the main hurdles in this area. Herein, a rigid Ca-rich silkworm excrement cellulose (SECCa) extracted from silkworm breeding waste was prepared. SEC-Ca was combined with the flexible hydroxypropyl methylcellulose (HPMC) molecules through hydrogen bonding and double ionic bonds of Zn²⁺ and Ca²⁺ to obtain the physical network SEC@HPMC-(Zn²⁺/Ca²⁺). Then, the covalently cross-linked network of polyacrylamide (PAAM) and the physical network were cross-linked by hydrogen bonding to obtain the physical-chemical double cross-linked hydrogel (SEC@HPMC-(Zn²⁺/Ca²⁺)/PAAM). The hydrogel showed excellent compression properties (95 %, 4.08 MPa), high ionic conductivity (4.63 S/m at 25 °C) and excellent frost resistance (possessing ionic conductivity of 1.20 S/m at -70 °C). Notably, the hydrogel can monitor pressure changes in a wide temperature range (-60-25 °C) with high sensitivity, stability and durability. This newly fabricated hydrogel-based pressure sensors can be deemed of great prospects for large-scale application of pressure detection at ultra-low temperatures.

All-printed and stretchable organic electrochemical transistors using a hydrogel electrolyte

Stretchable electronic devices are expected to play an important role in wearable electronics. Solution-processable conducting materials are desirable because of their versatile processing. Herein, we report the fabrication of fully stretchable organic electrochemical transistors (OECTs) by printing all components of the device. To achieve the stretchability of the whole body of the devices, a printed planar gate electrode and polyvinyl alcohol (PVA) hydrogel electrolyte were employed. Stretchable silver paste provided a soft feature to drain/source, gate and interconnect, without any additional strategies needed to improve the stretchability of the metallic components. The resulting OECTs showed a performance comparable to inkjet or screen-printed OECTs. The maximum transconductance and on/off ratio were 1.04 ± 0.13 mS and 830, respectively. The device was stable for 50 days and stretched up to 110% tensile strain, which makes it suitable for withstanding the mechanical deformation expected in wearable electronics. This work paves the way for all-printed and stretchable transistors in wearable bioelectronics.

Gel Electrolytes for Electrochemical Actuators and Sensors Applications

Advanced functional materials, especially gel electrolytes, play a very important role in the preparation of electrochemical actuators and sensors, and have received extensive attention. In this review, a general classification of gel electrolytes is firstly introduced according to the type of medium. Then, the research progress of gel electrolytes with different types used to fabricate electrochemical actuators is summarized. Next, the current research progress of gel electrolytes used in different types of electrochemical sensors, including strain sensors, stress sensors, and gas sensors is introduced. Finally, the future challenges and development prospects of electrochemical actuators and sensors based on gel electrolytes are discussed. The huge application prospects of gel electrolyte are worthy of further focusing by researchers, which will have an indispensable impact on human life and development.

Conductive, self-healing, and antibacterial Ag/MXene-PVA hydrogel as wearable skin-like sensors

The rapid development of flexible electronic technology has led to the in-depth study of flexible wearable sensors to achieve accurate sensing under different external stimuli. However, it is still a huge challenge to develop hydrogel-based wearable skin-like sensors with super ductility, high sensitivity, and self-healing properties. Herein, the Ti₃C₂ type of MXene was synthesized, and the Ag/MXene nanocomplexes were incorporated into polyvinyl alcohol-borax matrix to construct a novel composite hydrogel as the multifunctional nanofillers, which could bring both improved properties and novel functionalities. The Ag/MXene-Poly (vinyl alcohol) (PVA) hydrogel displayed integrated merits of highly strain sensitive (GF = 3.26), self-healing (within 10 min, 91% healing efficiency), and excellent antibacterial activity. The hydrogel could be assembled into a wearable skin-like sensor to monitor human movement, including large deformations (finger, elbow, wrist, and knee bending) and tiny deformations (mouth's movement and throat vocalization) in real time. Therefore, this work shed a new light on the development of flexible wearable skin-like sensors for the personalized healthcare monitoring, human-machine interfaces, and artificial intelligence.

High-Performance Strain Sensors Based on Organohydrogel Microsphere Film for Wearable Human-Computer Interfacing

Stretchable hydrogel-based strain sensors suffer from limited sensitivity, which urgently requires further breakthroughs for precise and stable human-computer interaction. Here, an efficient microstructural engineering strategy is proposed to significantly enhance the sensitivity of hydrogel-based strain sensors by sandwiching an emulsion-polymerized polyacrylamide organohydrogel microsphere membrane between two Ecoflex films, which are accompanied by crack generation and propagation effects upon stretching. Consequently, the as-developed strain sensor exhibits ultrahigh sensitivity (gauge factor (GF) of 1275), wide detection range (100% strain), low hysteresis, ultralow detection limit (0.05% strain), good fatigue resistance, and low fabrication cost. In addition, the sensor features good water, dehydration, and frost resistance, enabling real-time strain monitoring in various complex conditions due to the encapsulation of Ecoflex film and the addition of glycerol and KCl. Through further structural manipulation, the device achieves superior response to tiny strains, with a GF value of 98.3 in the strain range of less than 1.5%. Owing to the high strain sensing performance, the sensor is able to detect various human activities from swallowing to finger bending even under water. On this basis, a wireless sensing system with apnea warning and single-channel gesture recognition capabilities is successfully demonstrated, demonstrating its great promise as wearable electronics.

Deep Trap Boosted Ultrahigh Triboelectric Charge Density in Nanofibrous Cellulose-Based Triboelectric Nanogenerators

For their use in self-powered implantable or wearable electronics, cellulose nanofiber (CNF)-based triboelectric nanogenerators (TENGs) have drawn a lot of attention. However, the low triboelectric charge density (TECD) hinders its further application as a tribolayer for TENGs. In this work, a sulfonated cellulose nanofiber was prepared as an electropositive tribolayer for TENGs to obtain ultrahigh electrical output performance. Since the introduction of sulfonic acid effectively increased the dielectric properties and hole deep trap density of the CNF film, the triboelectric charge storage capacity of the CNF-SO₃Na film was improved. The results showed that the TECD of the CNF-SO₃Na film increased by 460% compared with the pristine CNF film. Furthermore, the dielectric constant and deep trap density of the CNF-SO₃Na film increased by 2.4 times and 8.1 times. This work encourages the use of TENGs in real-world wireless transmission applications by outlining an easy and effective method for building high-performance TENGs.

Ultrastretchable Composite Organohydrogels with Dual Cross-Links Enabling Multimodal Sensing

Building multiple cross-links or networks is a favorable way of diversifying applications of the hydrogels, which is also available for the organohydrogels prepared via the solvent replacement way. However, the situations become more complicated for organohydrogels due to the presence of replaced solvents. Therefore, the correlations between the multiple cross-links and final performance need to be better understood for the organohydrogels, which is vital for tailoring their inherent properties to expand final application scenarios. Polyacrylamide (PAM)/poly(vinyl alcohol) (PVA)/MXene composite organohydrogels with dual cross-links, namely, the covalently cross-linked PAM chains as the primary network and the physically cross-linked PVA/PAM chains with MXene particles as the secondary cross-links, were developed here for the study. The occurrence of the secondary cross-links plays multiple roles as sacrificial units endowing the system with ultrastretchability with an excellent strain-resistance effect and as temperature-sensitive units endowing the system with thermosensation ability with an outstanding temperature coefficient of resistance. Thus, the optimized sample can be used as a strain sensor with excellent environmental tolerance for detecting human motion as a pressure sensor to probe compression with weak deformation and as a thermal sensor to capture environmental temperature changes. This work provides valuable information on developing organohydrogels with superior performance for multimodal sensors.

Humidity Sensing of Stretchable and Transparent Hydrogel Films for Wireless Respiration Monitoring

Respiratory monitoring plays a pivotal role in health assessment and provides an important application prospect for flexible humidity sensors. However, traditional humidity sensors suffer from a trade-off between deformability, sensitivity, and transparency, and thus the development of high-performance, stretchable, and low-cost humidity sensors is urgently needed as wearable electronics. Here, ultrasensitive, highly deformable, and transparent humidity sensors are fabricated based on cost-effective polyacrylamide-based double network hydrogels. Concomitantly, a general method for preparing hydrogel films with controllable thickness is proposed to boost the sensitivity of hydrogel-based sensors due to the extensively increased specific surface area, which can be applied to different polymer networks and facilitate the development of flexible integrated electronics. In addition, sustainable tapioca rich in hydrophilic polar groups is introduced for the first time as a second cross-linked network, exhibiting excellent water adsorption capacity. Through the synergistic optimization of structure and composition, the obtained hydrogel film exhibits an ultrahigh sensitivity of 13,462.1%/%RH, which is unprecedented. Moreover, the hydrogel film-based sensor exhibits excellent repeatability and the ability to work normally under stretching with even enhanced sensitivity. As a proof of concept, we integrate the stretchable sensor with a specially designed wireless circuit and mask to fabricate a wireless respiratory interruption detection system with Bluetooth transmission, enabling real-time monitoring of human health status. This work provides a general strategy to construct high-performance, stretchable, and miniaturized hydrogel-based sensors as next-generation wearable devices for real-time monitoring of various physiological signals.

Bioinspired Freeze-Tolerant Soft Materials: Design, Properties, and Applications

In nature, many biological organisms have developed the exceptional antifreezing ability to survive in extremely cold environments. Inspired by the freeze resistance of these organisms, researchers have devoted extensive efforts to develop advanced freeze-tolerant soft materials and explore their potential applications in diverse areas such as electronic skin, soft robotics, flexible energy, and biological science. Herein, a comprehensive overview on the recent advancement of freeze-tolerant soft materials and their emerging applications from the perspective of bioinspiration and advanced material engineering is provided. First, the mechanisms underlying the freeze tolerance of cold-enduring biological organisms are introduced. Then, engineering strategies for developing antifreezing soft materials are summarized. Thereafter, recent advances in freeze-tolerant soft materials for different technological applications such as smart sensors and actuators, energy harvesting and storage, and cryogenic medical applications are presented. Finally, future challenges and opportunities for the rapid development of bioinspired freeze-tolerant soft materials are discussed.

Ultrasensitive, stretchable, and transparent humidity sensor based on ion-conductive double-network hydrogel thin films

Ion-conductive hydrogels with intrinsic biocompatibility, stretchability, and stimuli-responsive capability have attracted considerable attention because of their extensive application potential in wearable sensing devices. The miniaturization and integration of hydrogel-based devices are currently expected to achieve breakthroughs in device performance and promote their practical application. However, currently, hydrogel film is rarely reported because it can be easily wrinkled, torn, and dehydrated, which severely hinders its development in microelectronics. Herein, thin, stretchable, and transparent ion-conductive double-network hydrogel films with controllable thickness are integrated with stretchable elastomer substrates, which show good environmental stability and ultrahigh sensitivity to humidity (78,785.5%/% relative humidity (RH)). Benefiting from the ultrahigh surface-area-to-volume ratio, abundant active sites, and short diffusion distance, the hydrogel film humidity sensor exhibits 2 × 10⁵ times increased response to 98% RH, as well as 5.9 and 7.6 times accelerated response and recovery speeds compared with the bulk counterpart, indicating its remarkable thickness-dependent humidity-sensing properties. The humidity-sensing mechanism reveals that the adsorption of water improves the ion migration and dielectric constant, as well as establishes the electrical double layer. Furthermore, the noncontact human-machine interaction and real-time respiratory frequency detection are enabled by the sensors. This work provides an innovative strategy to achieve further breakthroughs in device performance and promote the development of hydrogel-based miniaturized and integrated electronics.

Ionic conductive hydroxypropyl methyl cellulose reinforced hydrogels with extreme stretchability, self-adhesion and anti-freezing ability for highly sensitive skin-like sensors

Ionically-conductive hydrogels are attracting increasing interest as skin-like sensors, however, the fabrication of ion-conductive hydrogels with excellent mechanical properties, high conductivity, self-adhesion and anti-freezing ability for high-performance sensors remains a challenge. Herein, a highly ion-conductive hydrogel is prepared by introducing LiCl into polyacrylamide/hydroxypropyl methyl cellulose (PAM/HPMC) composite hydrogel. The introduction of LiCl simultaneously endows the PAM/HPMC/LiCl hydrogel with outstanding stretchability (1453 %), high tensile strength (135 kPa), skin-like elasticity (9.18 kPa), high conductivity (7.85 S/m), good adhesiveness and wide operating temperature range. Impressively, this ion-conductive hydrogel can be utilized in skin-like sensor, which achieves high strain sensitivity (GF = 11.19) with wide sensing ranges (up to 600 %), and excellent endurance over 250 consecutive stretching. As a result, the wearable sensor assembled from the hydrogels can be used to detect complex human activities with high stability even at -40 °C. This work promotes the development of ion-conductive hydrogels with broad operating temperature in advanced sensory platform.

Wearable Ionogel-Based Fibers for Strain Sensors with Ultrawide Linear Response and Temperature Sensors Insensitive to Strain

Fiber-shaped stretchable strain and temperature sensors are highly desirable for wearable electronics due to their excellent flexibility, comfort, air permeability, and easiness to be weaved into fabric. Herein, we prepare a smart ionogel-based fiber composed of thermoplastic polyurethane (TPU) and ionic liquid (IL) by the facile and scalable wet-spinning technique, which can serve as a wearable strain sensor with good linearity (a correlation coefficient of 0.997) in an ultrawide sensing range (up to 700%), ultralow-detection limit (0.05%), fast response (173 ms) and recovery (120 ms), and high reproducibility. Attributed to these outstanding strain sensing performances, the designed TPU/IL ionogel fiber-shaped sensor is able to monitor both subtle physiological activities and large human motions. More interestingly, because of the fast response and high resolution to strain, the fiber-shaped sensor can be sewn into the fabric to secretly encrypt and wirelessly translate message according to the principle of Morse code. More importantly, a wearable strain-insensitive temperature sensor can be obtained from the ionogel fiber if it is designed into an "S" shape, which can effectively eliminate the interference of strain on temperature sense. It is found that the inaccuracy of temperature sense is within 0.15 °C when the sensor is subjected to 30% tensile strain simultaneously. Moreover, this strain-insensitive temperature sensor shows a monotonic temperature response over a wide temperature range (-15 to 100 °C) with an ultrahigh detecting accuracy of 0.1 °C and good reliability, owing to the fast and stable thermal response of IL. This temperature sensor can realize the detection of thermal radiation, proximity, and respiration, exhibiting enormous potential in smart skin, personal healthcare, and wearable electronics. This work proposes a simple but effective strategy to realize the essential strain and temperature sensing capabilities of wearable electronics and smart fabrics without mutual interference.

Patterned Magnetofluids via Magnetic Printing and Photopolymerization for Multifunctional Flexible Electronic Sensors

Liquid conductor-based flexible sensors with high mechanical deformability and reliable electrical reversibility have aroused great interest in electronic skin, soft robotics, environmental monitoring, and other fields. Herein, we develop a novel strategy to fabricate liquid conductor-based flexible sensors by combining ionic liquid-based magnetofluids (IL-MFs), magnetic printing, and photopolymerization techniques. The as-prepared sensors exhibit excellent electromechanical properties, such as a wide detection range, low hysteresis, fast response time, good durability, etc. Moreover, the gauge factors (GFs) of the sensor could be easily adjusted by changing the modulators with different line widths or patterns, and the strain sensors can also be designed for anisotropic monitoring. Apart from serving as strain sensors, the magnetofluid-based flexible sensors can be used to detect external pressure, human activities, and changes in temperature, illumination, and magnetic field as well. This work provides a facile strategy to fabricate liquid conductor-based multifunctional sensors. Such a magnetofluid-based sensor has a great promising future.

Tough, Anti-Swelling Supramolecular Hydrogels Mediated by Surfactant-Polymer Interactions for Underwater Sensors

It is a great challenge for traditional hydrogel-based sensors to be effective underwater due to unsatisfactory water resistance and insufficient wet adhesion. Herein, a tough supramolecular hydrogel aiming at underwater sensing is prepared by the modification of hydrophilic poly(acrylic acid) (PAA) with a small amount of hydrophobic lauryl methacrylate (LMA) in the presence of high concentrations of the cationic surfactant cetyltrimethylammonium bromide (CTAB). Owing to the synergistic effects of the electrostatic interactions and hydrophobic associations of CTAB with the P(AA-co-LMA) copolymer, the hydrogel with a water content of approximately 58.5 wt % demonstrates outstanding anti-swelling feature, superior tensile strength (≈1.6 MPa), large stretchability (>900%), rapid room-temperature self-recovery (≈3 min at 100% strain), and robust wet adhesion to diverse substrates. Moreover, the strain sensor based on the hydrogel displays keen sensitivity in a sensing range of 0-900% (gauge factor is 0.42, 3.44, 5.44, and 7.39 in the strain range of 0-100, 100-300, 300-500, and 500-900%, respectively) and pronounced stability both in air and underwater. Additionally, the hydrogel can be easily recycled by dissolving in anhydrous ethanol. This work provides a facile strategy to fabricate eco-friendly, tough supramolecular hydrogels for underwater sensing.

An ultrastretchable, high-performance, and crosstalk-free proximity and pressure bimodal sensor based on ionic hydrogel fibers for human-machine interfaces

The traditional human-machine interaction mode of communicating solely with pressure sensors needs modification, especially at a time when COVID-19 is circulating globally. Here, a transparent, stretchable, resilient, and high-performance hydrogel fiber-based bimodal sensor is fabricated by using a polyacrylamide-alginate double network hydrogel, which features high sensitivity (3.17% cm^-1), wide working range (18 cm), fast response/recovery speeds (90/90 ms) and good stability in proximity sensing, and impressive pressure sensing performance, including high sensitivity (0.91 kPa^-1), short response/recovery time (40/40 ms), low detection limit (63 Pa) and good linearity. Moreover, the response switch between proximity/pressure modes is measured and non-interfering dual-mode detection is achieved. Notably, the stretchable bimodal sensor is capable of working under 100% tensile strain without degrading the sensing performance. Specifically, the proximity sensor shows good immunity to the strain, while the pressure sensitivity is even promoted. Furthermore, the sensor is tough enough to work normally after punctures from a knife and strikes from a wrench. Notably, the sensor can be used for gesture recognition and subtle pressure detection, such as small water droplets (10 mg), wrist pulse, etc. A 3 × 3 array is further shown for accurate spatial sensing and location identification, verifying the feasibility of its practical application.

Smart Antifreeze Hydrogels with Abundant Hydrogen Bonding for Conductive Flexible Sensors

Recently, flexible sensors based on conductive hydrogels have been widely used in human health monitoring, human movement detection and soft robotics due to their excellent flexibility, high water content, good biocompatibility. However, traditional conductive hydrogels tend to freeze and lose their flexibility at low temperature, which greatly limits their application in a low temperature environment. Herein, according to the mechanism that multi−hydrogen bonds can inhibit ice crystal formation by forming hydrogen bonds with water molecules, we used butanediol (BD) and N−hydroxyethyl acrylamide (HEAA) monomer with a multi−hydrogen bond structure to construct LiCl/p(HEAA−co−BD) conductive hydrogel with antifreeze property. The results indicated that the prepared LiCl/p(HEAA−co−BD) conductive hydrogel showed excellent antifreeze property with a low freeze point of −85.6 °C. Therefore, even at −40 °C, the hydrogel can still stretch up to 400% with a tensile stress of ~450 KPa. Moreover, the hydrogel exhibited repeatable adhesion property (~30 KPa), which was attributed to the existence of multiple hydrogen bonds. Furthermore, a simple flexible sensor was fabricated by using LiCl/p(HEAA−co−BD) conductive hydrogel to detect compression and stretching responses. The sensor had excellent sensitivity and could monitor human body movement.

Temperature-Responsive Ionic Conductive Hydrogel for Strain and Temperature Sensors

Flexible wearable devices have achieved remarkable applications in health monitoring because of the advantages of multisignal collecting and real-time wireless transmission of information. However, the integration of bulky sensing elements and rigid metal circuit components in traditional wearable devices may lead to a mechanical and signal-conducting mismatch between wearable devices and biological tissues, thus restricting their wide applications in the human body. The excellent mechanical properties, conductivity, and high tissue resemblance of conductive hydrogel contribute to its application in flexible electronic sensors to monitor human health. In this work, a dual-network, temperature-responsive ionic conductive hydrogel with excellent stretchability, fast temperature responsiveness, and good conductivity was developed by introducing a polyvinylpyrrolidone (PVP)/ tannic acid (TA)/ Fe3+ cross-linked network into the N,N-methylene diacrylamide (MBAA) cross-linked poly(N-isopropylacrylamide-co-acrylamide) (P(NIPAAm-co-AM)) network. Furthermore, the introduction of the PVP/TA/Fe3+ cross-linked network endowed the hydrogel with excellent stretchability and conductivity. By adjusting the molar ratio of TA and Fe3+ to 3:5, a hydrogel with a maximal stretching ratio of 720% and sensitive strain response (GF = 3.61) was achieved, showing a promising application in wearable strain sensors to monitor both large and fine human motions. Moreover, by introducing PNIPAAm with a lower critical solution temperature (LCST), the hydrogel may be used to monitor the environmental temperature through the temperature-conductivity responsiveness, which can be applied as a wearable temperature sensor to detect fever or tissue hyperthermia in the human body.

Ti2C3Tx/Polyurethane Constructed by Gas-Liquid Interface Self-Assembly for Underwater Sensing

Nowadays, multifunctional, easily prepared, and highly sensitive flexible sensors have attracted extensive attention and are gradually used in various scenarios. Here, we report the design of the Ti₂C₃T_x/polyurethane composites prepared by a facile gas-liquid interface self-assembly. The obtained flexible sensor has a wide detection range (∼900%), a low-stress detection limit (<1%), a high sensitivity (GF = 1.3, strain from 0 to 100%), and a fast response time (<140 ms). The multifunctional stress sensor can be applied to not only wearable motion monitoring and detection of various signals but also the detection of underwater human motion, as well as different motion states and swimming frequencies of toy fish in water, demonstrating its great prospects in a variety of applications, such as human movement monitoring and marine biological detection and research.

Tannic acid modified antifreezing gelatin organohydrogel for low modulus, high toughness, and sensitive flexible strain sensor

Current hydrogel strain sensors have met assorted essential requirements of wearing comfort, mechanical toughness, and strain sensitivity. However, an increment in the toughness of a hydrogel usually leads to an increase in elastic moduli that could be unfavorable for wearing comfort. In addition, traits of biofriendly and sustainability require synthesis of the hydrogels from natural polymer-based networks. We propose a novel strategy to fabricate an ionic conductive organohydrogel from natural biological macromolecule "gelatin" and polyacid "tannic acid" to resolve these challenges. Tannic acid modified the structure of the gelatin network in the ionic conductive organohydrogels, that not only led to an increase in toughness accompanying a decrease in elastic moduli but also headed to higher strain sensitivity and tunability. The proposed methodology exhibited tunable tensile modulus from 27 to 13 kPa, tensile strength from 287 to 325 kPa, elongation at fracture from 510 to 620%, toughness from 500 to 550 kJ/m³_, conductivity from 0.29 to 0.8 S/m, and strain sensitivity (GF = 1.4-6.5). Moreover, the proposed organohydrogel exhibited excellent freezing tolerance. This study provides a facile yet powerful strategy to tune the mechanical and electrical properties of organohydrogels which can be adapted to various wearable sensors.

Robust and adhesive lignin hybrid hydrogel as an ultrasensitive sensor

The fabrication of hydrogel for sensing purposes remains to be a challenge since the hydrogel needs to have both good mechanical strength and adhesiveness. This work reports a robust and adhesive hydrogel mainly constructed with AgNPs@lignin, polyacrylamide (PAM) and sodium alginate (SA). The silver nanoparticles (AgNPs) were in-situ generated via the reaction between lignin and silver ammonia ([Ag(NH₃)₂]⁺). The resultant lignin hybrid hydrogel exhibited a stress, strain and tearing energy up to 0.055 MPa, 1000% and 250 J·m^-2, respectively. Furthermore, the hydrogel adhered to different materials with an adhesion energy of higher than 230 J·m^-2. This hydrogel was demonstrated to be an ideal sensing material since it could detect both large-scale motions and tiny physiological signals including breathing and pulse. The hydrogel also exhibited good antibacterial performance and biocompatibility. This work provides a good example to design a lignin-based high-performance hydrogel material for sensing purposes.

Bioinspired Stretchable Fiber-Based Sensor toward Intelligent Human-Machine Interactions

Wearable integrated sensing devices with flexible electronic elements exhibit enormous potential in human-machine interfaces (HMI), but they have limitations such as complex structures, poor waterproofness, and electromagnetic interference. Herein, inspired by the profile of Lindernia nummularifolia (LN), a bionic stretchable optical strain (BSOS) sensor composed of an LN-shaped optical fiber incorporated with a stretchable substrate is developed for intelligent HMI. Such a sensor enables large strain and bending angle measurements with temperature self-compensation by the intensity difference of two fiber Bragg gratings' (FBGs') center wavelength. Such configurations enable an excellent tensile strain range of up to 80%, moreover, leading to ultrasensitivity, durability (≥20,000 cycles), and waterproofness. The sensor is also capable of measuring different human activities and achieving HMI control, including immersive virtual reality, robot remote interactive control, and personal hands-free communication. Combined with the machine learning technique, gesture classification can be achieved using muscle activity signals captured from the BSOS sensor, which can be employed to obtain the motion intention of the prosthetic. These merits effectively indicate its potential as a solution for medical care HMI and show promise in smart medical and rehabilitation medicine.

Environment tolerant, adaptable and stretchable organohydrogels: preparation, optimization, and applications

Multiple stretchable materials have been successively developed and applied to wearable devices, soft robotics, and tissue engineering. Organohydrogels are currently being widely studied and formed by dispersing immiscible hydrophilic/hydrophobic polymer networks or only hydrophilic polymer networks in an organic/water solvent system. In particular, they can not only inherit and carry forward the merits of hydrogels, but also have some unique advantageous features, such as anti-freezing and water retention abilities, solvent resistance, adjustable surface wettability, and shape memory effect, which are conducive to the wide environmental adaptability and intelligent applications. This review first summarizes the structure, preparation strategy, and unique advantages of the reported organohydrogels. Furthermore, organohydrogels can be optimized for electro-mechanical properties or endowed with various functionalities by adding or modifying various functional components owing to their modifiability. Correspondingly, different optimization strategies, mechanisms, and advanced developments are described in detail, mainly involving the mechanical properties, conductivity, adhesion, self-healing properties, and antibacterial properties of organohydrogels. Moreover, the applications of organohydrogels in flexible sensors, energy storage devices, nanogenerators, and biomedicine have been summarized, confirming their unlimited potential in future development. Finally, the existing challenges and future prospects of organohydrogels are provided.

Conductive Gels: Properties and Applications of Nanoelectronics

Conductive gels are a special class of soft materials. They harness the 3D micro/nanostructures of gels with the electrical and optical properties of semiconductors, producing excellent novel attributes, like the formation of an intricate network of conducting micro/nanostructures that facilitates the easy movement of charge carriers. Conductive gels encompass interesting properties, like adhesion, porosity, swelling, and good mechanical properties compared to those of bulk conducting polymers. The porous structure of the gels allows the easy diffusion of ions and molecules and the swelling nature provides an effective interface between molecular chains and solution phases, whereas good mechanical properties enable their practical applications. Due to these excellent assets, conductive gels are promising candidates for applications like energy conversion and storage, sensors, medical and biodevices, actuators, superhydrophobic coatings, etc. Conductive gels offer promising applications, e.g., as soft sensors, energy storage, and wearable electronics. Hydrogels with ionic species have some potential in this area. However, they suffer from dehydration due to evaporation when exposed to the air which limits their applications and lifespan. In addition to conductive polymers and organic charge transfer complexes, there is another class of organic matter called "conductive gels" that are used in the organic nanoelectronics industry. The main features of this family of organic materials include controllable photoluminescence, use in photon upconversion technology, and storage of optical energy and its conversion into electricity. Various parameters change the electronic and optical behaviors of these materials, which can be changed by controlling some of the structural and chemical parameters of conductive gels, their electronic and optical behaviors depending on the applications. If the conjugated molecules with π bonds come together spontaneously, in a relative order, to form non-covalent bonds, they form a gel-like structure that has photoluminescence properties. The reason for this is the possibility of excitation of highest occupied molecular orbital level electrons of these molecules due to the collision of landing photons and their transfer to the lowest unoccupied molecular orbital level. This property can be used in various nanoelectronic applications such as field-effect organic transistors, organic solar cells, and sensors to detect explosives. In this paper, the general introduction of conductive or conjugated gels with π bonds is discussed and some of the physical issues surrounding electron excitation due to incident radiation and the mobility of charge carriers, the position, and role of conductive gels in each of these applications are discussed.

β-Cyclodextrin-Based Ultrahigh Stretchable, Flexible, Electro- and Pressure-Responsive, Adhesive, Transparent Hydrogel as Motion Sensor

In the present work, a multiple-stimuli-responsive hydrogel has been synthesized via polymerization of acrylamide (AAm) and N-hydroxy methyl acrylamide (HMAm) on β-cyclodextrin (β-CD). The synthesized hydrogel β-CD-g-(pAAm/pHMAm) exhibited various striking features like ultrahigh stretchability (>6000%), flexibility, stab resistivity, self-recoverability, electroresponsiveness, pressure-responsiveness, adhesiveness, and high transparency (>90%). Besides, the hydrogel has demonstrated enhanced biocompatibility, UV resistance, and thermoresponsive shape memory behaviors. On the basis of these attractive characteristics of the hydrogel, a flexible pressure sensor for the real-time monitoring of human motion with superior biocompatibility and transparency was fabricated. Moreover, due to the nanofibrillar surface morphology of the β-CD-g-(pAAm/pHMAm) hydrogel, the sensor based on the gel exhibited high sensitivity (0.053 kPa^-1 for 0-3.3 kPa). The flexible sensor demonstrates very fast response time (130 ms-210 ms) with adequate stability (5000 cycles). Interestingly, the sensor can rapidly sense both robust (index finger and wrist) motions as well as tiny (swallowing and phonation) physiological actions. In addition, this adhesive hydrogel patch also acts as a potential carrier for the sustained topical release of (∼80.8% in 48 h) the antibiotic drug gentamicin sulfate.

Reversibly Stretchable Organohydrogel-Based Soft Electronics with Robust and Redox-Active Interfaces Enabled by Polyphenol-Incorporated Double Networks

Hydrogel electrolytes as soft ionic conductors have been extensively exploited to establish skinlike and biocompatible devices. However, in many common hydrogels, there exists irreversible elongation upon prolonged stretching cycles and poor interfacial contact, which have significantly hindered their practical applications where long-term operation at large deformations is needed. Herein, multifunctional soft electronic devices with reversible stretchability and improved electrode/electrolyte interfaces are demonstrated by employing polyacrylamide-based double-network organohydrogel electrolytes soaked with a high content of tannic acid (TA) that affords multiple noncovalent interactions and redox activity. Performances of the TA-rich gels are evaluated for the first time in realizing shape-recoverable stretchable devices against repeated deformations to 500% strain, with superior gel-electrode interfaces exhibiting both intimate adhesion and boosted electrochemical capacitance of >200 mF·cm^-2. A maximal 4-fold higher capacitance can be achieved by introducing TA and ethylene glycol (EG) into hydrogels. Moreover, a soft electronic system consisting of stretchable supercapacitors and gel-based microsensors was demonstrated, in which the electronic performance of these devices can be well preserved after >1000 repeated cycles at strains of up to 200%, without obvious residual strain or electrode delamination. This could pave a route to the design of multifunctional gel networks tackling both the mechanical and interfacial issues in soft and biocompatible devices.