Carbon Nanotube-Based Ion Selective Sensors for Wearable Applications

Assembly of Highly Aligned Carbon Nanotubes Using an Electro-Fluidic Assembly Process

Carbon nanotubes (CNTs) are promising building blocks for emerging wearable electronics and sensors due to their outstanding electrical and mechanical properties. However, the practical applications of the CNTs face challenges of efficiently and precisely placing them at the desired location with controlled orientation and density. Here, we introduce an electro-fluidic assembly process to assemble highly aligned and densely packed CNTs selectively on a substrate with patterned wetted areas at a high rate. An electric field is applied during the electro-fluidic assembly process, which drives the CNTs close to the patterned regions and shortens the assembly time. Meanwhile, the electric field orientates the CNTs perpendicular to the substrate and anchors one end of the CNTs onto the substrate. When pulling the substrate out of the CNT suspension, the capillary force at the air-water-substrate interface stretches the free end of the CNTs and aligns the CNTs along the pulling direction. By adjusting two governing parameters, the direct current voltage and the pulling speed, we have demonstrated well aligned CNTs assembled in patterns with widths from 1 to 100 μm and lengths from 20 to 120 μm at a rate 20 times higher than a fluidic assembly process. The aligned CNTs show improved electrical conductivity compared with the random networks and prove possibility for strain detection. Precise and reproducible control of the orientation and the placement of the CNTs opens up their practical application in the next-generation electronics and sensors.

Solid Contact Potentiometric Sensors Based on a New Class of Ionic Liquids on Thiacalixarene Platform

New solid-contact potentiometric sensors have been developed for hydrogen phosphate recognition on the basis of ionic liquids containing tetrasubstituted derivatives of thiacalix[4]arene in cone and 1,3-alternate conformations with trimethyl- and triethylammonium fragments at the lower rim substituents. The recognition of selected anions including carbonate, hydrogen phosphate, perchlorate, oxalate, picrate, and EDTA was conducted using electrochemical impedance spectroscopy with ferricyanide redox probe. For the potentiometric sensor assembling, the ionic liquids were stabilized by multiwalled carbon nanotubes and carbon black deposited on the glassy carbon electrode. The influence of support, steric factors and modification conditions on the sensor performance has been investigated. As was shown, potentiometric sensors developed make it possible to selectively determine hydrogen phosphate anion within the concentration range from 1 × 10⁻² to 1 × 10⁻⁶ M and limit of detection of 2 × 10⁻⁷−1 × 10⁻⁶ M with unbiased selectivity coefficients varied from 1.2 × 10⁻¹ to 1.0 × 10⁻⁸ (carbonate, acetate, oxalate, succinate, glutharate, glycolate, and malonate anions).

Highly-stable Li+ ion-selective electrodes based on noble metal nanostructured layers as solid-contacts

Nowadays the development of stable and highly efficient Solid-Contact Ion-Selective Electrodes (SC-ISEs) attracts much attention in the research community because of the great expansion of portable analytical devices. In this work, we present highly stable Li⁺ all-solid-state ISEs exploiting noble metals nanostructures as ion-to-electron transducers. The detection of lithium is essential for therapeutic drug monitoring of bipolar patients. In addition, greater environmental exposure to this ion is occurring due to the large diffusion of lithium-ion batteries. However, only a limited number of SC Li⁺ ISEs already exists in literature based on Conductive Polymers (CPs) and carbon nanotubes. The use of noble metals for ion-to-electron transduction offers considerable advantages over CPs and carbon materials, including fast and conformal one-step deposition by electrochemical means, non-toxicity and high stability. We investigate for the first time the use of gold nanocorals obtained by means of a one-step electrodeposition process to improve sensor performance and we compare it to all-solid-state ISEs based on electrodeposited platinum nanoflowers. In addition, the effect of substrate electrode material, membrane thickness and conditioning concentration on the potentiometric response is carefully analysed. Scanning Electron Microscopy (SEM) and Current Reversal Chronopotentiometry (CRC) techniques are used to characterize the morphology and the electrochemical behaviour of the different ISEs. The use of nanostructured gold and platinum contacts allows the increase of the SC capacitance by one or two orders of magnitude, respectively, with respect to the flat metal, while the SC resistance is significantly reduced. We show that the microfabricated sensors offer Nernstian behaviour (58.7±0.8 mV/decade) in the activity range from 10^-5 to 0.1 M, with short response time (∼15 s) and small potential drift during CRC measurements (dEdt=3×10^-5±2×10^-5 V/s). The exceptional response stability is verified also when no potential is applied. The sensor shows high selectivity towards all clinically important ions, with values very similar to conventional ISEs. Furthermore, to our knowledge, the selectivity towards Ca⁺² is the best ever reported for SC-ISEs. In conclusion, the present study opens up new interesting perspectives towards the development of simple and reproducible fabrication protocols to obtain high-quality and high-stability all-solid-state ISEs.