Anodized Aluminum Oxide-Assisted Low-Cost Flexible Capacitive Pressure Sensors Based on Double-Sided Nanopillars by a Facile Fabrication Method

High-Resolution and High-Sensitivity Flexible Capacitive Pressure Sensors Enhanced by a Transferable Electrode Array and a Micropillar-PVDF Film

Flexible pressure sensors have attracted increasing attention because they can mimic human skin to sense external pressure; however, for mimicking human skin, the sensing of a pressure point is far from sufficient. To realize fully biomimetic skins, it is crucial for flexible sensors to have high resolution and high sensitivity. We conducted simulations and experiments to determine the relationship between the sensor sensitivity and physical parameters, such as the effective relative permittivity and air ratio of the dielectric layer. According to the results, a micropillar-poly(vinylidene fluoride) (PVDF) dielectric layer was designed to achieve high sensitivity (0.43 kPa^-1) in the low-pressure regime (<1 kPa). An 8 × 8 pixel sensor matrix was prepared based on a micropillar-PVDF (MP) film and electrode array (MPEA) to detect the pressure distribution with high resolution (13 dpi). Each pixel could reflect the point of applied pressure through an obvious change in the relative capacitance; moreover, objects with various geometries could be mapped by the pixels of the flexible sensor. A counterweight, a plastic flag, and pine leaves were placed on the flexible sensor, and the shapes were successfully mapped; in particular, the mapping of the ∼0.005 g ultra-lightweight pine leaves with a length of 7 mm and a width of 0.6 mm shows the high sensitivity and high resolution of our flexible pressure sensor.

Strain-Discriminable Pressure/Proximity Sensing of Transparent Stretchable Electronic Skin Based on PEDOT:PSS/SWCNT Electrodes

Pressure/proximity sensing as the essential function of electronic skin (e-skin) has become an emerging technological goal for new-generation electronic devices in a wide variety of application fields, for example, smart electronics, human-machine interaction, and prosthetics. However, the current research lacks pressure/proximity detection of the stretched e-skin, which ignores the key elastic characteristic of skin and hinders the development of e-skin. Here, the pressure/proximity detection of the transparent e-skin in the stretching state is demonstrated based on poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS)/single-walled carbon nanotube (SWCNT). The high transparency of the e-skin realizes the visual imperception for wearable electronic systems. The perfect combination of stretchable SWCNT and highly conductive PEDOT:PSS endows the sensors with high stretchability and high discrimination capability toward strain, providing an effective way to overcome the interference of strain to realize accurate pressure/proximity detection of stretched e-skin at different strains.

Wearable Capacitive Pressure Sensor Based on MXene Composite Nanofibrous Scaffolds for Reliable Human Physiological Signal Acquisition

In recent years, highly sensitive pressure sensors that are flexible, biocompatible, and stretchable have attracted significant research attention in the fields of wearable electronics and smart skin. However, there has been a considerable challenge to simultaneously achieve highly sensitive, low-cost sensors coupled with optimum mechanical stability and an ultralow detection limit for subtle physiological signal monitoring devices. Targeting aforementioned issues, herein, we report the facile fabrication of a highly sensitive and reliable capacitive pressure sensor for ultralow-pressure measurement by sandwiching MXene (Ti₃C₂T_x)/poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) composite nanofibrous scaffolds as a dielectric layer between biocompatible poly-(3,4-ethylenedioxythiophene) polystyrene sulfonate /polydimethylsiloxane electrodes. The fabricated sensor exhibits a high sensitivity of 0.51 kPa^-1 and a minimum detection limit of 1.5 Pa. In addition, it also enables linear sensing over a broad pressure range (0-400 kPa) and high reliability over 10,000 cycles even at extremely high pressure (>167 kPa). The sensitivity of the nanofiber-based sensor is enhanced by MXene loading, thereby increasing the dielectric constant up to 40 and reducing the compression modulus to 58% compared with pristine PVDF-TrFE nanofiber scaffolds. The proposed sensor can be used to determine the health condition of patients by monitoring physiological signals (pulse rate, respiration, muscle movements, and eye twitching) and also represents a good candidate for a next generation human-machine interfacing device.