Light-Activated Immobilization of Biomolecules to Agarose Hydrogels for Controlled Cellular Response

Structural and molecular micropatterning of dual hydrogel constructs for neural growth models using photochemical strategies

Chemotactic and haptotactic cues guide neurite growth toward appropriate targets by eliciting attractive or repulsive responses from the neurite growth cones. Here we present an integrated system allowing both structural and molecular micropatterning in dual hydrogel 3D tissue culture constructs for directing in vitro neuronal growth via structural, immobilized, and soluble guidance cues. These tissue culture constructs were fabricated into specifiable geometries using UV light reflected from a digital micromirror device acting as a dynamic photomask, resulting in dual hydrogel constructs consisting of a cell growth-restrictive polyethylene glycol (PEG) boundary with a cell growth-permissive interior of photolabile α-carboxy-2-nitrobenzyl cysteine agarose (CNBC-A). This CNBC-A was irradiated in discrete areas and subsequently tagged with maleimide-conjugated biomolecules. Fluorescent microscopy showed biomolecule binding only at the sites of irradiation in CNBC-A, and confocal microscopy confirmed 3D binding through the depth of the construct. Neurite outgrowth studies showed contained growth throughout CNBC-A. The diffusion rate of soluble fluorescein-bovine serum albumin through the dual hydrogel construct was controlled by PEG concentration and the distance between the protein source and the agarose interior; the timescale for a transient protein gradient changed with these parameters. These findings suggest the dual hydrogel system is a useful platform for manipulating a 3D in vitro microenvironment with patterned structural and molecular guidance cues for modeling neural growth and guidance.

Hyaluronic acid click hydrogels emulate the extracellular matrix

Hydrogels are used to create 3D microenvironments with properties that direct cell function. The current study demonstrates the versatility of hyaluronic acid (HA)-based hydrogels with independent control over hydrogel properties such as mechanics, architecture, and the spatial distribution of biological factors. Hydrogels were prepared by reacting furan-modified HA with bis-maleimide-poly(ethylene glycol) in a Diels-Alder click reaction. Biomolecules were photopatterned into the hydrogel by two-photon laser processing, resulting in spatially defined growth factor gradients. The Young's modulus was controlled by either changing the hydrogel concentration or the furan substitution on the HA backbone, thereby decoupling the hydrogel concentration from mechanical properties. Porosity was controlled by cryogelation, and the pore size distribution, by the thaw temperature. The addition of galactose further influenced the porosity, pore size, and Young's modulus of the cryogels. These HA-based hydrogels offer a tunable platform with a diversity of properties for directing cell function, with applications in tissue engineering and regenerative medicine.

Synthesis of photodegradable macromers for conjugation and release of bioactive molecules

Hydrogel scaffolds are used in biomedicine to study cell differentiation and tissue evolution, where it is critical to control the delivery of chemical cues both spatially and temporally. While large molecules can be physically entrapped in a hydrogel, moderate molecular weight therapeutics must be tethered to the hydrogel network through a labile linkage to allow controlled release. We synthesized and characterized a library of polymerizable ortho-nitrobenzyl (o-NB) macromers with different functionalities at the benzylic position (alcohol, amine, BOC-amine, halide, acrylate, carboxylic acid, activated disulfide, N-hydroxysuccinyl ester, biotin). This library of polymerizable macromers containing o-NB groups should allow direct conjugation of nearly any type of therapeutic agent and its subsequent controlled photorelease from a hydrogel network. As proof-of-concept, we incorporated the N-hydroxysuccinyl ester macromer into hydrogels and then reacted phenylalanine with the NHS ester. Upon exposure to light (λ = 365 nm; 10 mW/cm(2), 10 min), 81.3% of the phenylalanine was released from the gel. Utilizing the photodegradable macromer incorporating an activated disulfide, we conjugated a cell-adhesive peptide (GCGYGRGDSPG), a protein that exhibits enzymatic activity (bovine serum albumin (BSA)), and a growth factor (transforming growth factor-β1 (TGF-β1)) into hydrogels, controlled their release with light (λ = 365 nm; 10 mW/cm(2), 0-20 min), and verified the bioactivity of the photoreleased molecules. The photoreleasable peptide allows real-time control over cell adhesion. BSA maintains full enzymatic activity upon sequestration and release from the hydrogel. Photoreleased TGF-β1 is able to induce chondrogenic differentiation of human mesenchymal stem cells comparable to native TGF-β1. Through this approach, we have demonstrated that photodegradable tethers can be used to sequester peptides and proteins into hydrogel depots and release them in an externally controlled, predictable manner without compromising biological function.

Photo-selective delivery of model therapeutics from hydrogels

Hydrogels are commonly used in biomedical applications to sequester and release therapeutics. Covalently tethering therapeutic agents to a hydrogel through a degradable linkage allows their controlled release, but temporally separating the release of multiple therapeutics from a single hydrogel remains a major challenge. In this report, we use of a series of photodegradable ortho-nitrobenzyl (o-NB) groups with varying structures to link model therapeutic agents (fluorescein, rhodamine and aminomethylcoumarin acetate) to poly(ethylene glycol) macromers. We polymerized the macromers into hydrogel networks via redox polymerization and quantified the apparent rate constants of degradation (k_app) of each of the photoreleasable compounds. By exploiting differences in reactivity of the different o-NB groups, we are able to create complex, multi-stage release profiles. We demonstrate the ability to switch between concurrent and biased release of model therapeutics simply by switching wavelengths. We also demonstrate a complex four-stage release profile in which the release of three separate model therapeutics is controlled by varying wavelength, intensity and exposure time. This is the first report of photo-selective release of therapeutics from a hydrogel, allowing user-dictated real-time spatial and temporal control over multiple chemical signals in a cell microenvironment in 2D and 3D.

Photoresponsive hydrogels for biomedical applications

Hydrogels are soft materials composed of a three-dimensional network which contain a high percentage of water similar to body tissue and are therefore regarded as a biocompatible material. Hydrogels have various potential applications in the biomedical field such as drug delivery and as scaffold for tissue engineering. Control over the physical properties of a hydrogel by an external stimulus is highly desirable and is therefore actively studied. Light is a particularly interesting stimulus to manipulate the properties of a hydrogel as it is a remote stimulus that can be controlled spatially and temporally with great ease and convenience. Therefore in recent years photoresponsive hydrogels have been investigated as an emerging biomaterial. Here we will review recent developments and discuss these new materials, and their applications in the biomedical field.

Polyacrylamide hydrogels as substrates for studying bacteria

Polyacrylamide hydrogels can be used as chemically and physically defined substrates for bacterial cell culture, and enable studies of the influence of surfaces on cell growth and behaviour.

Modification of polymer networks with bone sialoprotein promotes cell attachment and spreading

Biomaterials used for tissue engineering scaffolds act as temporary substrates, on which cells deposit newly synthesized extracellular matrix. In cartilage tissue engineering, polycaprolactone/poly(2-hydroxyethyl methacrylate) (PCL/pHEMA) polymer blends have been used as scaffold materials, but their use in osseous tissue engineering has been more limited. The objective of this study was to evaluate modification of PCL/pHEMA surfaces with bone sialoprotein (BSP), an extracellular matrix protein important in regulating osseous tissue formation. Modification of surfaces with BSP significantly enhanced osteoblastic cell attachment and spreading, without compromising proliferation. Thus, BSP-immobilization may be a useful strategy for optimizing scaffolds for skeletal tissue engineering.

Multifunctional hybrid three-dimensionally woven scaffolds for cartilage tissue engineering

The successful replacement of large-scale cartilage defects or osteoarthritic lesions using tissue-engineering approaches will likely require composite biomaterial scaffolds that have biomimetic mechanical properties and can provide cell-instructive cues to control the growth and differentiation of embedded stem or progenitor cells. This study describes a novel method of constructing multifunctional scaffolds for cartilage tissue engineering that can provide both mechanical support and biological stimulation to seeded progenitor cells. 3-D woven PCL scaffolds were infiltrated with a slurry of homogenized CDM of porcine origin, seeded with human ASCs, and cultured for up to 42 d under standard growth conditions. These constructs were compared to scaffolds derived solely from CDM as well as 3-D woven PCL fabric without CDM. While all scaffolds promoted a chondrogenic phenotype of the ASCs, CDM scaffolds showed low compressive and shear moduli and contracted significantly during culture. Fiber-reinforced CDM scaffolds and 3-D woven PCL scaffolds maintained their mechanical properties throughout the culture period, while supporting the accumulation of a cartilaginous extracellular matrix. These findings show that fiber-reinforced hybrid scaffolds can be produced with biomimetic mechanical properties as well as the ability to promote ASC differentiation and chondrogenesis in vitro.

Surface modification of silk fibroin with poly(ethylene glycol) for antiadhesion and antithrombotic applications

Silk fibroin film surfaces were PEGylated by reaction with cyanuric chloride-activated poly(ethylene glycol) (PEG). Reactions with different concentrations of activated PEG generated films with PEG graft densities from 0.02 to 0.4 mg per square cm of silk fibroin. Increased PEGylation resulted in increased hydrophilicity as analyzed by contact angle, and a smoother morphology based on scanning electron microscopy. Increased PEGylation decreased human IgG adsorption and decreased the attachment and proliferation of human fibroblasts over two weeks. Increased concentration of PEG on the silk fibroin surfaces also decreased the proliferation of human mesenchymal stem cells and inhibited human platelet attachment. Surface PEGylated silk fibroin films could be useful antiadhesion and antithrombotic materials for biomedical applications when considered along with the unique mechanical and tailorable degradation profiles of silk fibroin.

In silico estimates of the free energy rates in growing tumor spheroids

The physics of solid tumor growth can be considered at three distinct size scales: the tumor scale, the cell-extracellular matrix (ECM) scale and the sub-cellular scale. In this paper we consider the tumor scale in the interest of eventually developing a system-level understanding of the progression of cancer. At this scale, cell populations and chemical species are best treated as concentration fields that vary with time and space. The cells have chemo-mechanical interactions with each other and with the ECM, consume glucose and oxygen that are transported through the tumor, and create chemical by-products. We present a continuum mathematical model for the biochemical dynamics and mechanics that govern tumor growth. The biochemical dynamics and mechanics also engender free energy changes that serve as universal measures for comparison of these processes. Within our mathematical framework we therefore consider the free energy inequality, which arises from the first and second laws of thermodynamics. With the model we compute preliminary estimates of the free energy rates of a growing tumor in its pre-vascular stage by using currently available data from single cells and multicellular tumor spheroids.

Electroconductive hydrogels: synthesis, characterization and biomedical applications

Electroconductive hydrogels (ECHs) are composite biomaterials that bring together the redox switching and electrical properties of inherently conductive electroactive polymers (CEPs) with the facile small molecule transport, high hydration levels and biocompatibility of cross-linked hydrogels. General methods for the synthesis of electroconductive hydrogels as polymer blends and as polymer co-networks via chemical oxidative, electrochemical and/or a combination of chemical oxidation followed by electrochemical polymerization techniques are reviewed. Specific examples are introduced to illustrate the preparation of electroconductive hydrogels that were synthesized from poly(HEMA)-based hydrogels with polyaniline and from poly(HEMA)-based hydrogels with polypyrrole. The key applications of electroconductive hydrogels; as biorecognition membranes for implantable biosensors, as electro-stimulated drug release devices for programmed delivery, and as the low interfacial impedance layers on neuronal prostheses are highlighted. These applications provide great new horizons for these stimuli responsive, biomimetic polymeric materials.

Synthesis of an agarose-gelatin conjugate for use as a tissue engineering scaffold

We synthesized a conjugate in which gelatin was covalently crosslinked to agarose using 1,1-carbonyldiimidazole (CDI) in dimethyl sulfoxide in order to obtain gels with cellular adhesiveness that showed a sol-to-gel transition, but no gel-to-sol transition, around body temperature. The gelatin content of the conjugate increased by 2.7-fold when the concentration of CDI was increased from 1.3 to 32.7 mM. Aqueous solutions of the conjugate gelled upon cooling from 40 degrees C to 20 degrees C, but did not remelt at 37 degrees C. The percentage of adhered cells after 4 h of culture on a gel created from a conjugate containing about 25 wt% gelatin was similar to that for cells grown on tissue culture dishes. The adhered cells proliferated on the conjugate gel during culture for a further 5 d. In addition, the conjugate used in this study did not result in mechanical instability of the resultant gel compared to that of an unmodified agarose gel. These results demonstrate that this agarose-gelatin conjugate is a good candidate material for tissue engineering.

Formulation of photocleavable liposomes and the mechanism of their content release

In pursuit of designing photocleavable liposomes as drug delivery vehicles, we synthesized several amphiphilic lipids by connecting stearyl amine (as the non-polar tail) and charged amino acids (as polar heads) via the o-nitrobenzyl derivatives. The lipids containing Glu, Asp, and Lys amino acids were subjected to photocleavage reaction by UV light, and the overall spectral changes of the chromophoric o-nitrobenzyl conjugates were determined as a function of time. The experimental data revealed that the feasibility of the cleavage reaction, nature and magnitude of the spectral changes during the course of the cleavage reaction, and their overall kinetic profiles were dictated by the type of amino acid constituting the polar head groups. The cleavage reactions of the Asp and Glu containing lipids were found to be more facile than that of the lysine-containing lipid. Using these lipids, we formulated photocleavable liposomes, and investigated the photo-triggered release of an encapsulated (within the liposomal lumen) dye as a function of time. The kinetic data revealed that the release of the liposomal content conformed to a two-step mechanism, of which the first (fast) step involved the photocleavage of lipids followed by the slow release of the liposomal content during the second step. The overall mechanistic features intrinsic to the photocleavage of Asp, Glu and Lys containing o-nitrobenzyl conjugated lipids, and their potential applications in formulating liposomes (whose contents can be "unloaded" by the UV light) as drug delivery vehicles are discussed.