Double perovskites as a family of highly active catalysts for oxygen evolution in alkaline solution

Achieving structural stability and enhanced electrochemical performance through Nb-doping into Li- and Mn-rich layered cathode for lithium-ion batteries

Although Li- and Mn-rich layered oxides are attractive cathode materials possessing high energy densities, they have not been commercialized owing to voltage decay, low rate capability, poor capacity retention, and high irreversible capacity in the first cycle. To circumvent these issues, we propose a Li_1.2Ni_0.13Co_0.13Mn_0.53Nb_0.01O₂ (Nb-LNCM) cathode material, wherein Nb doping strengthens the transition metal oxide (TM-O) bond and alleviates the anisotropic lattice distortion while stabilizing the layered structure. During long-term cycling, maintaining a wider LiO₆ interslab thickness in Nb-LNCM creates a favorable Li⁺ diffusion path, which improves the rate capability. Moreover, Nb doping can decrease oxygen loss, suppress the phase transition from layered to spinel and rock-salt structures, and relieve structural degradation. Nb doping results in less capacity contributions of Mn and Co and more reversible Ni and O redox reactions compared to pristine Li_1.2Ni_0.133Co_0.133Mn_0.533O₂ (LNCM), which significantly mitigates the voltage decay (Δ0.289 and Δ0.516 V for Nb-LNCM and LNCM, respectively) and ensures stable capacity retention (82.7 and 70.3% for Nb-LNCM and LNCM, respectively) during the initial 100 cycles. Our study demonstrates that Nb doping is an effective and practical strategy to enhance the structural and electrochemical integrity of Li- and Mn-rich layered oxides. This promotes the development of stable cathode materials for high-energy-density lithium-ion batteries.

Tailoring Spin State of Perovskite Oxides by Fluorine Atom Doping for Efficient Oxygen Electrocatalysis

Promoting the initially deficient but economical catalysts to high-performing competitors is important for developing superior catalysts. Unlike traditional nano-morphology construction methods, this work focuses on intrinsic catalytic activity enhancement via heteroatom doping strategies to induce lattice distortion and optimize spin-dependent orbital interaction to alter charge transfer between catalysts and reactants. Experimentally, a series of different concentrations of fluorine-doped lanthanum cobaltate (F_x -LaCoO₃ ) exhibiting excellent electrocatalytic activity is synthesized, including a low overpotential of 390 mV at j = 10 mA cm^-2 for OER and a large half-wave potential of 0.68 V for ORR. Meanwhile, the assembled rechargeable Zn-air batteries deliver an excellent performance with a large specific capacity of 811 mAh/g_Zn under 10 mA cm^-2 and stability of charge/recharge (120 h). Theoretically, taking advantage of density functional theory calculations, it is found that the prominent OER/ORR performance arises from the spin state transition of Co³⁺ (Low spin state (LS, t_2g ⁶ e_g ⁰ ) → Intermediate spin state (IS, t_2g ⁵ e_g ¹ ) and the mediated d-band center upshift by F atom incorporation. This work establishes a novel avenue for designing superior electrocatalysts in perovskite-based oxides by regulating spin states.

Remarkably Enhanced Lattice Oxygen Participation in Perovskites to Boost Oxygen Evolution Reaction

Enhancing the participation of the lattice oxygen mechanism (LOM) in several perovskites to significantly boost the oxygen evolution reaction (OER) is daunting. With the rapid decline in fossil fuels, energy research is turning toward water splitting to produce usable hydrogen by significantly reducing overpotential for other half-cells' OER. Recent studies have shown that in addition to the conventional adsorbate evolution mechanism (AEM), participation of LOM can overcome their prevalent scaling relationship limitations. Here, we report the acid treatment strategy and bypass the cation/anion doping strategy to significantly enhance LOM participation. Our perovskite demonstrated a current density of 10 mA cm^-2 at an overpotential of 380 mV and a low Tafel slope (65 mV dec^-1) much lower than IrO₂ (73 mV dec^-1). We propose that the presence of nitric acid-induced defects regulates the electronic structure and thereby lowers oxygen binding energy, allowing enhanced LOM participation to boost OER significantly.

Study of Optoelectronic Features in Polar and Nonpolar Polymorphs of the Oxynitride Tin-Based Semiconductor InSnO2N

In view of its potential applicability in photoconversion processes, we here discuss the optoelectronic features of the recently proposed tin-based oxynitride material for (photo)catalysis, InSnO₂N. In detail, by combining Density Functional and Many-Body Perturbation Theory, we compute the electronic and optical properties discussing how they vary from the nonpolar phase to the more stable polar one. After providing a detailed, unbiased, description of the optoelectronic features of the two phases, we have finally calculated the Spectroscopic Limited Maximum Efficiency and obtained data that further witness the relevance of InSnO₂N for solar energy conversion processes.

Recent Status and Developments of Vacancies Modulation in the ABO3 Perovskites for Catalytic Applications

Perovskite oxides (ABO₃ ) have attracted comprehensive interest for wide range of functional applications (especially for chemical catalysis) due to their high design flexibility, controllable vacancies sites creation, abundant chemical properties, and stable crystal structure. Herein, the previous research and potential development of ABO₃ through adjusting the vacancy at different sites (A-site, B-site, and O-site) to enhance catalytic performance are systematically analyzed and generalized. Briefly, the ABO₃ with different vacancies sites prepared by multifarious direct and indirect methods, accompanied with the improved physical-chemical properties, endow them with distinct and intensified development of catalysis application. In addition, the impressive optimization proved by the vacancies sites adjustment over the ABO₃ is studied to continuously facilitate the advance in some common catalysis reactions, further expanding to other optimized functional applications. At last, the constructive suggestions for fine regulation and analysis of vacancies sites over ABO₃ are also put forward.

Advances in Spin Catalysts for Oxygen Evolution and Reduction Reactions

Searching for high effective catalysts has been an endless effort to improve the efficiency of green energy harvesting and degradation of pollutants. In the past decades, tremendous strategies are explored to achieve high effective catalysts, and various theoretical understandings are proposed for the improved activity. As the catalytic reaction occurs at the surface or edge, the unsaturated ions may lead to the fluctuation of spin. Meanwhile, transition metals in catalysts have diverse spin states and may yield the spin effects. Therefore, the role of spin or magnetic moment should be carefully examined. In this review, the recent development of spin catalysts is discussed to give an insightful view on the origins for the improved catalytic activity. First, a brief introduction on the applications and advances in spin-related catalytic phenomena, is given, and then the fundamental principles of spin catalysts and magnetic fields-radical reactions are introduced in the second part. The spin-related catalytic performance reported in oxygen evolution/reduction reaction (OER/ORR) is systematically discussed in the third part, and general rules are summarized accordingly. Finally, the challenges and perspectives are given. This review may provide an insightful understanding of the microscopic mechanisms of catalytic phenomena and guide the design of spin-related catalysts.

Ab initio study of changing the oxygen reduction activity of Co-Fe-based perovskites by tuning the B-site composition

Perovskite oxides are promising low-cost and stable alternative electrocatalysts for the oxygen reduction reaction (ORR), relative to the precious metal-based electrocatalysts. Despite the experimental research on substituting various transition metals into the B-site of perovskite catalysts to improve the ORR performance, the detailed ORR mechanism due to the substitution process is rarely studied. In this paper, the ORR activity of La_0.5Sr_0.5Co_xFe_1-xO₃ perovskites (x = 0, 0.25, 0.5, 0.75, and 1) is studied by density functional theory (DFT). The ORR mechanism in alkaline solution is theoretically examined as a function of the Co/Fe composition at different potentials. The substitution of Co for Fe at the B-site of the perovskites dramatically changes the theoretical overpotential and enhances the activity. The HOO* formation is the potential-determining step for all the Co/Fe compositions. In comparison with the other compositions, the Co_0.5/Fe_0.5 composition exhibits the lowest overpotential and bonding with the reaction intermediates moderately. Furthermore, the oxygen binding energy is correlated with the bulk oxygen p-band center relative to the Fermi level. Among all the Co/Fe compositions, the Co_0.5/Fe_0.5 composition shows neither too low nor too high oxygen p-band center value. These results provide deep insights into the ORR mechanism on B-site substituted perovskites and guidelines for the design of cost-effective and Pt-free electrocatalysts for oxygen reduction.

Advancements in Liquid Jet Technology and X-ray Spectroscopy for Understanding Energy Conversion Materials during Operation

ConspectusWater splitting is intensively studied for sustainable and effective energy storage in green/alternative energy harvesting-storage-release cycles. In this work, we present our recent developments for combining liquid jet microtechnology with different types of soft X-ray spectroscopy at high-flux X-ray sources, in particular developed for studying the oxygen evolution reaction (OER). We are particularly interested in the development of in situ photon-in/photon-out techniques, such as in situ resonant inelastic X-ray scattering (RIXS) techniques at high-repetition-frequency X-ray sources, pointing toward operando capabilities. The pilot catalytic systems we use are perovskites having the general structure ABO₃ with lanthanides or group II elements at the A sites and transition metals at the B sites. Depending on the chemical substitutions of ABO₃, their catalytic activity for OER can be tuned by varying the composition.In this work, we present our in situ RIXS studies of the manganese L-edge of perovskites during OER. We have developed various X-ray spectroscopy approaches like transmission zone plate-, reflection zone plate-, and grating-based emission spectroscopy techniques. Combined with tunable incident X-ray energies, we yield complementary information about changing (inverse) X-ray absorption features of the perovskites, allowing us to deduce element- and oxidation-state-specific chemical monitoring of the catalyst. Adding liquid jet technology, we monitor element- and oxidation-state-specific interactions of the catalyst with water adsorbate during OER. By comparing the different technical spectroscopy approaches combined with high-repetition-frequency experiments at synchrotrons and free-electron lasers, we conclude that the combination of liquid jet with low-resolution zone-plate-based X-ray spectroscopy is sufficient for element- and oxidation-state-specific chemical monitoring during OER and easy to handle.For an in-depth study of OER mechanisms, however, including the characterization of catalyst-water adsorbate in terms of their charge transfer properties and especially valence intermediates formed during OER, high-resolution spectroscopy tools based on a combination of liquid jets with gratings bear bigger potential since they allow resolution of otherwise-overlapping X-ray spectroscopy transitions. Common for all of these experimental approaches is the conclusion that without the versatile developments of liquid jets and liquid beam technologies, elaborate experiments such as high-repetition experiments at high-flux X-ray sources (like synchrotrons or free-electron lasers) would hardly be possible. Such experiments allow sample refreshment for every single X-ray shot for repetition frequencies of up to 5 MHz, so that it is possible (a) to study X-ray-radiation-sensitive samples and also (b) to utilize novel types of flux-hungry X-ray spectroscopy tools like photon-in/photon-out X-ray spectroscopy to study the OER.

Regulating Spin States in Oxygen Electrocatalysis

Developing efficient and stable transition metal oxides catalysts for energy conversion processes such as oxygen evolution reaction and oxygen reduction reaction is one of the key measures to solve the problem of energy shortage. The spin state of transition metal oxides is strongly correlated with their catalytic activities. In an octahedral structure of transition metal oxides, the spin state of active centers could be regulated by adjusting the splitting energy and the electron pairing energy. Regulating spin state of active centers could directly modulate the d orbitals occupancy, which influence the strength of metal-ligand bonds and the adsorption behavior of the intermediates. In this review, we clarified the significance of regulating spin state of the active centers. Subsequently, we discussed several characterization technologies for spin state and some recent strategies to regulate the spin state of the active centers. Finally, we put forward some views on the future research direction of this vital field.

Efficient Ternary Mn-Based Spinel Oxide with Multiple Active Sites for Oxygen Evolution Reaction Discovered via High-Throughput Screening Methods

The discovery of more efficient and stable catalysts for oxygen evolution reaction (OER) is vital in improving the efficiency of renewable energy generation devices. Given the large numbers of possible binary and ternary metal oxide OER catalysts, high-throughput methods are necessary to accelerate the rate of discovery. Herein, Mn-based spinel oxide, Fe₁₀ Co₄₀ Mn₅₀ O, is identified for the first time using high-throughput methods demonstrating remarkable catalytic activity (overpotential of 310 mV on fluorine-doped tin oxide (FTO) substrate and 237 mV on Ni foam at 10 mA cm^-2 ). Using a combination of soft X-ray absorption spectroscopy and electrochemical measurements, the high catalytic activity is attributed to 1) the formation of multiple active sites in different geometric sites, tetrahedral and octahedral sites; and 2) the formation of active oxyhydroxide phase due to the strong interaction of Co²⁺ and Fe³⁺ . Structural and surface characterizations after OER show preservation of Fe₁₀ Co₄₀ Mn₅₀ O surface structure highlighting its durability against irreversible redox damage on the catalytic surface. This work demonstrates the use of a high-throughput approach for the rapid identification of a new catalyst, provides a deeper understanding of catalyst design, and addresses the urgent need for a better and stable catalyst to target greener fuel.

Dynamic Surface Evolution of Metal Oxides for Autonomous Adaptation to Catalytic Reaction Environments

Metal oxides possessing distinctive physical/chemical properties due to different crystal structures and stoichiometries play a pivotal role in numerous current technologies, especially heterogeneous catalysis for production/conversion of high-valued chemicals and energy. To date, many researchers have investigated the effect of the structure and composition of these materials on their reactivity to various chemical and electrochemical reactions. However, metal oxide surfaces evolve from their initial form under dynamic reaction conditions due to the autonomous behaviors of the constituent atoms to adapt to the surrounding environment. Such nanoscale surface phenomena complicate reaction mechanisms and material properties, interrupting the clarification of the origin of functionality variations in reaction environments. In this review, the current findings on the spontaneous surface reorganization of metal oxides during reactions are categorized into three types: 1) the appearance of nano-sized second phase from oxides, 2) the (partial) encapsulation of oxide atoms toward supported metal surfaces, and 3) the oxide surface reconstruction with selective cation leaching in aqueous solution. Then their effects on each reaction are summarized in terms of activity and stability, providing novel insight for those who design metal-oxide-based catalytic materials.

Reduced Potential Barrier of Sodium-Substituted Disordered Rocksalt Cathode for Oxygen Evolution Electrocatalysts

Cation-disordered rocksalt (DRX) cathodes have been viewed as next-generation high-energy density materials surpassing conventional layered cathodes for lithium-ion battery (LIB) technology. Utilizing the opportunity of a better cation mixing facility in DRX, we synthesize Na-doped DRX as an efficient electrocatalyst toward oxygen evolution reaction (OER). This novel OER electrocatalyst generates a current density of 10 mA cm−2 at an overpotential (η) of 270 mV, Tafel slope of 67.5 mV dec−1, and long-term stability >5.5 days’ superior to benchmark IrO2 (η = 330 mV with Tafel slope = 74.8 mV dec−1). This superior electrochemical behavior is well supported by experiment and sparse Gaussian process potential (SGPP) machine learning-based search for minimum energy structure. Moreover, as oxygen binding energy (OBE) on the surface closely relates to OER activity, our density functional theory (DFT) calculations reveal that Na-doping assists in facile O2 evolution (OBE = 5.45 eV) compared with pristine-DRX (6.51 eV).

Controlling the Hydrophilicity of the Electrochemical Interface to Modulate the Oxygen-Atom Transfer in Electrocatalytic Epoxidation Reactions

The electrocatalytic epoxidation of alkenes at heterogeneous catalysts using water as the sole oxygen source is a promising safe route toward the sustainable synthesis of epoxides, which are essential building blocks in organic chemistry. However, the physicochemical parameters governing the oxygen-atom transfer to the alkene and the impact of the electrolyte structure on the epoxidation reaction are yet to be understood. Here, we study the electrocatalytic epoxidation of cyclooctene at the surface of gold in hybrid organic/aqueous mixtures using acetonitrile (ACN) solvent. Gold was selected, as in ACN/water electrolytes gold oxide is formed by reactivity with water at potentials less anodic than the oxygen evolution reaction (OER). This unique property allows us to demonstrate that a sacrificial mechanism is responsible for cyclooctene epoxidation at metallic gold surfaces, proceeding through cyclooctene activation, while epoxidation at gold oxide shares similar reaction intermediates with the OER and proceeds via the activation of water. More importantly, we show that the hydrophilicity of the electrode/electrolyte interface can be tuned by changing the nature of the supporting salt cation, hence affecting the reaction selectivity. At low overpotential, hydrophilic interfaces formed using strong Lewis acid cations are found to favor gold passivation. Instead, hydrophobic interfaces created by the use of large organic cations favor the oxidation of cyclooctene and the formation of epoxide. Our study directly demonstrates how tuning the hydrophilicity of electrochemical interfaces can improve both the yield and selectivity of anodic reactions at the surface of heterogeneous catalysts.

Structural properties of mixed conductor Ba1-xGd1-yLax+yCo2O6-δ

Ba_1-xGd_1-yLa_x+yCo₂O_6-δ (BGLC) compositions with large compositional ranges of Ba, Gd, and La have been characterised with respect to phase compositions, structure, and thermal and chemical expansion. The results show a system with large compositional flexibility, enabling tuning of functional properties and thermal and chemical expansion. We show anisotropic chemical expansion and detailed refinements of emerging phases as La is substituted for Ba and Gd. The dominating phase is the double perovskite structure Pmmm, which is A-site ordered along the c-axes and with O vacancy ordering along the b-axis in the Ln-layer. Phases emerging when substituting La for Ba are orthorhombic Ba-deficient Pbnm and cubic LaCoO₃-based R3̄c. When La is almost completely substituted for Gd, the material can be stabilised in Pmmm, or cubic Pm3̄m, depending on thermal and atmospheric history. We list thermal expansion coefficients for x = 0-0.3, y = 0.2.

Toward Superb Perovskite Oxide Electrocatalysts: Engineering of Coupled Nanocomposites

A significant issue that bedeviled the commercialization of renewable energy technologies, ranging from low-temperature water electrolyzers to high-temperature solid oxide cells, is the lack of high-performance catalysts. Among various candidates that could tackle such a challenge, perovskite oxides are rising-star materials because of their unique structural and compositional flexibility. However, single-phase perovskite oxides are challenging to satisfy all the requirements of electrocatalysts concurrently for practical applications, such as high catalytic activity, excellent stability, good ionic and electronic conductivities, and superior chemical/thermo-mechanical robustness. Impressively, perovskite oxides with coupled nanocomposites are emerging as a novel form offering multifunctionality due to their intrinsic features, including infinite interfaces with solid interaction, tunable compositions, flexible configurations, and maximum synergistic effects between assorted components. Considering this new configuration has attracted great attention owing to its promising performances in various energy-related applications, this review timely summarizes the leading-edge development of perovskite oxide-based coupled nanocomposites. Their state-of-art synthetic strategies are surveyed and highlighted, their unique structural advantages are highlighted and illustrated through the typical oxygen reduction reaction and oxygen evolution reactions in both high and low-temperature applications. Opinions on the current critical scientific issues and opportunities in this burgeoning research field are all provided.

Understanding of Oxygen Redox in the Oxygen Evolution Reaction

The electron-transfer process during the oxygen evolution reaction (OER) often either proceeds solely via a metal redox chemistry (adsorbate evolution mechanism (AEM), with metal bands around the Fermi level) or an oxygen redox chemistry (lattice oxygen oxidation mechanism (LOM), with oxygen bands around the Fermi level). Unlike the AEM, the LOM involves oxygen redox chemistry instead of metal redox, which leads to the formation of a direct oxygen-oxygen (OO) bond. As a result, such a process is able to bypass the rate-determining step, that is, OO bonding, in AEM, which highlights the critical advantage of LOM as compared to the conventional AEM. Thus, it has been well reported that LOM-based catalysts are able to demonstrate higher OER activities as compared to AEM-based catalysts. Here, a comprehensive understanding of the oxygen redox in LOM and all documented and possible characterization techniques that can be used to identify the oxygen redox are reviewed. This review will interpret the origins of oxygen redox in the reported LOM-based electrocatalysts and the underlying science of LOM-induced surface reconstruction in transition metal oxides. Finally, perspectives on the future development of LOM electrocatalysts are also provided.

Synergistic effect of p-type and n-type dopants in semiconductors for efficient electrocatalytic water splitting

The main challenge for acidic water electrolysis is the lack of active and stable oxygen evolution catalysts based on abundant materials, which are globally scalable. Iridium oxide is the only material which is active and stable. However, Ir is extremely rare. While both active materials and stable materials exist, those that are active are usually not stable and vice versa. In this work, we present a new design strategy for activating stable materials originally deemed unsuitable due to a semiconducting nature and wide band gap energy. These stable semiconductors cannot change oxidation state under the relevant reaction conditions. Based on DFT calculations, we find that adding an n-type dopant facilitates oxygen binding on semiconductor surfaces. The binding is, however, strong and prevents further binding or desorption of oxygen. By combining both n-type and p-type dopants, the reactivity can be tuned so that oxygen can be adsorbed and desorbed under reaction conditions. The tuning results from the electrostatic interactions between the dopants as well as between the dopants and the binding site. This concept is experimentally verified on TiO₂ by co-substituting with different pairs of n- and p-type dopants. Our findings suggest that the co-substitution approach can be used to activate stable materials, with no intrinsic oxygen evolution activity, to design new catalysts for acid water electrolysis.

Orbital Occupancy and Spin Polarization: From Mechanistic Study to Rational Design of Transition Metal-Based Electrocatalysts toward Energy Applications

Over the past few decades, development of electrocatalysts for energy applications has extensively transitioned from trial-and-error methodologies to more rational and directed designs at the atomic levels via either nanogeometric optimization or modulating electronic properties of active sites. Regarding the modulation of electronic properties, nonprecious transition metal-based materials have been attracting large interest due to the capability of versatile tuning d-electron configurations expressed through the flexible orbital occupancy and various possible degrees of spin polarization. Herein, recent advances in tailoring electronic properties of the transition-metal atoms for intrinsically enhanced electrocatalytic performances are reviewed. We start with discussions on how orbital occupancy and spin polarization can govern the essential atomic level processes, including the transport of electron charge and spin in bulk, reactive species adsorption on the catalytic surface, and the electron transfer between catalytic centers and adsorbed species as well as reaction mechanisms. Subsequently, different techniques currently adopted in tuning electronic structures are discussed with particular emphasis on theoretical rationale and recent practical achievements. We also highlight the promises of the recently established computational design approaches in developing electrocatalysts for energy applications. Lastly, the discussion is concluded with perspectives on current challenges and future opportunities. We hope this review will present the beauty of the structure-activity relationships in catalysis sciences and contribute to advance the rational development of electrocatalysts for energy conversion applications.

Identifying the geometric catalytic active sites of crystalline cobalt oxyhydroxides for oxygen evolution reaction

Unraveling the precise location and nature of active sites is of paramount significance for the understanding of the catalytic mechanism and the rational design of efficient electrocatalysts. Here, we use well-defined crystalline cobalt oxyhydroxides CoOOH nanorods and nanosheets as model catalysts to investigate the geometric catalytic active sites. The morphology-dependent analysis reveals a ~50 times higher specific activity of CoOOH nanorods than that of CoOOH nanosheets. Furthermore, we disclose a linear correlation of catalytic activities with their lateral surface areas, suggesting that the active sites are exclusively located at lateral facets rather than basal facets. Theoretical calculations show that the coordinatively unsaturated cobalt sites of lateral facets upshift the O 2p-band center closer to the Fermi level, thereby enhancing the covalency of Co-O bonds to yield the reactivity. This work elucidates the geometrical catalytic active sites and enlightens the design strategy of surface engineering for efficient OER catalysts.

While cobalt-based electrocatalysts demonstrate promising performances for oxygen evolution, active site identification is complicated by concurrent structural changes. Here, authors examine crystalline, well-defined cobalt oxyhydroxide nanomaterials and identify the geometric active sites.

Transition metal oxides with perovskite and spinel structures for electrochemical energy production applications

Transition metal oxide-based materials are an interesting alternative to substitute noble-metal based catalyst in energy conversion devices designed for oxygen reduction (ORR), oxygen evolution (OER) and hydrogen evolution reactions (HER). Perovskite (ABO₃) and spinel (AB₂O₄) oxides stand out against other structures due to the possibility of tailoring their chemical composition and, consequently, their properties. Particularly, the electrocatalytic performance of these materials depends on features such as chemical composition, crystal structure, nanostructure, cation substitution level, e_g orbital filling or oxygen vacancies. However, they suffer from low electrical conductivity and surface area, which affects the catalytic response. To mitigate these drawbacks, they have been combined with carbon materials (e.g. carbon black, carbon nanotubes, activated carbon, and graphene) that positively influence the overall catalytic activity. This review provides an overview on tunable perovskites (mainly lanthanum-based) and spinels featuring 3d metal cations such as Mn, Fe, Co, Ni and Cu on octahedral sites, which are known to be active for the electrochemical energy conversion.

Simultaneously Improved Surface and Bulk Participation of Evolved Perovskite Oxide for Boosting Oxygen Evolution Reaction Activity Using a Dynamic Cation Exchange Strategy

Perovskite oxides are intriguing electrocatalysts for the oxygen evolution reaction, but both surface (e.g., composition) and bulk (e.g., lattice oxygen) properties should be optimized to maximize their participation in offering favorable activity and durability. In this work, it is demonstrated that through introducing exogenous Fe³⁺ ( Fe exo 3 + ${\rm{Fe}}_{{\rm{exo}}}^{3 + }$ ) into the liquid electrolyte, not only is the reconstructed surface stabilized and optimized, but the lattice oxygen diffusion is also accelerated. As a result, compared to that in Fe-free 0.1 m KOH, PrBa_0.5 Sr_0.5 Co₂ O_5+δ in 0.1 m KOH + 0.1 mm Fe³⁺ demonstrates a tenfold increment in activity, an extremely low Tafel slope of ≈50 mV dec^-1 , and outstanding stability at 10.0 mA cm^-2  for 10 h. The superior activity and stability are further demonstrated in Zn-air batteries by presenting high open-circuit voltage, narrow potential gap, high power output, and long-term cycle stability (500 cycles). Based on experimental and theoretical calculations, it is discovered that the dynamical interaction between the Co hydr(oxy)oxide from surface reconstruction and intentional Fe³⁺ from the electrolyte plays an important role in the enhanced activity and durability, while the generation of a perovskite-hydr(oxy)oxide heterostructure improves the lattice oxygen diffusion to facilitate lattice oxygen participation and enhances the stability.

Perovskite-based electrocatalysts for oxygen evolution reaction in alkaline media: A mini review

Water electrolysis is one of the attractive technologies for producing clean and sustainable hydrogen fuels with high purity. Among the various kinds of water electrolysis systems, anion exchange membrane water electrolysis has received much attention by combining the advantages of alkaline water electrolysis and proton exchange membrane water electrolysis. However, the sluggish kinetics of the oxygen evolution reaction, which is based on multiple and complex reaction mechanisms, is regarded as a major obstacle for the development of high-efficiency water electrolysis. Therefore, the development of high-performance oxygen evolution reaction electrocatalysts is a prerequisite for the commercialization and wide application of water electrolysis systems. This mini review highlights the current progress of representative oxygen evolution reaction electrocatalysts that are based on a perovskite structure in alkaline media. We first summarize the research status of various kinds of perovskite-based oxygen evolution reaction electrocatalysts, reaction mechanisms and activity descriptors. Finally, the challenges facing the development of perovskite-based oxygen evolution reaction electrocatalysts and a perspective on their future are discussed.

Atomistic Insights into Activation and Degradation of La0.6Sr0.4CoO3-δ Electrocatalysts under Oxygen Evolution Conditions

The stability of perovskite oxide catalysts for the oxygen evolution reaction (OER) plays a critical role in their applicability in water splitting concepts. Decomposition of perovskite oxides under applied potential is typically linked to cation leaching and amorphization of the material. However, structural changes and phase transformations at the catalyst surface were also shown to govern the activity of several perovskite electrocatalysts under applied potential. Hence, it is crucial for the rational design of durable perovskite catalysts to understand the interplay between the formation of active surface phases and stability limitations under OER conditions. In the present study, we reveal a surface-dominated activation and deactivation mechanism of the prominent electrocatalyst La_0.6Sr_0.4CoO_3−δ under steady-state OER conditions. Using a multiscale microscopy and spectroscopy approach, we identify the evolving Co-oxyhydroxide as catalytically active surface species and La-hydroxide as inactive species involved in the transient degradation behavior of the catalyst. While the leaching of Sr results in the formation of mixed surface phases, which can be considered as a part of the active surface, the gradual depletion of Co from a self-assembled active CoO(OH) phase and the relative enrichment of passivating La(OH)₃ at the electrode surface result in the failure of the perovskite catalyst under applied potential.

Probing Dynamic Self-Reconstruction on Perovskite Fluorides toward Ultrafast Oxygen Evolution

Exploring low cost, highly active, and durable electrocatalysts for oxygen evolution reaction (OER) is of prime importance to boost energy conversion efficiency. Perovskite fluorides are emerging as alternative electrocatalysts for OER, however, their intrinsically active sites during real operation are still elusive. Herein, the self-reconstruction on newly designed NiFe coupled perovskite fluorides during OER process is demonstrated. In situ Raman spectroscopy, ex situ X-ray absorption spectroscopy, and theoretical calculation reveal that Fe incorporation can significantly activate the self-reconstruction of perovskite fluorides and efficiently lower the energy barrier of OER. Benefiting from self-reconstruction and low energy barrier, the KNi_0.8 Fe_0.2 F₃ @nickel foam (KNFF2@NF) electrocatalyst delivers an ultralow overpotential of 258 mV to afford 100 mA cm^-2 and an excellent durability for 100 h, favorably rivaling most the state-of-the-art OER electrocatalysts. This protocol provides the fundamental understanding on OER mechanism associated with surface reconstruction for perovskite fluorides.

General Synthesis of Tube-like Nanostructured Perovskite Oxides with Tunable Transition Metal-Oxygen Covalency for Efficient Water Electrooxidation in Neutral Media

Hydrogen production from water electrolysis in neutral-pH electrolytes can not only avoid the corrosion and safety issues and expand the catalyst option but also potentially integrate with artificial photosynthesis and bioelectrocatalysis. However, heterogeneous catalysts that can efficiently negotiate the sluggish oxygen evolution reaction (OER) in neutral solutions are considerably lacking. Herein, we report a template-assisted strategy for the synthesis of 13 kinds of tube-like nanostructured perovskite oxides (TNPOs) with markedly high Brunauer-Emmett-Teller surface areas. By systematic examination of these TNPOs, we found that the OER activity of TNPOs in neutral solution exhibits a volcano shape as a function of the covalency of transition metal-oxygen bonds. Consequently, our designed Sm-doped LaCoO₃ catalyst yields a geometric current density of 8.5 mA cm^-2 at 1.75 V versus the reversible hydrogen electrode in 1 M phosphate buffer solution (pH 7) due to the optimized covalency of Co 3d and O 2p states, representing the most active noble-metal-free OER catalyst in neutral electrolytes reported as yet.

Stabilization of a Mn-Co Oxide During Oxygen Evolution in Alkaline Media

Improving the stability of electrocatalysts for the oxygen evolution reaction (OER) through materials design has received less attention than improving their catalytic activity. We explored the effects of Mn addition to a cobalt oxide for stabilizing the catalyst by comparing single phase CoOx and (Co0.7Mn0.3)Ox films electrodeposited in alkaline solution. The obtained disordered films were classified as layered oxides using X-ray absorption spectroscopy (XAS). The CoOx films showed a constant decrease in the catalytic activity during cycling, confirmed by oxygen detection, while that of (Co0.7Mn0.3)Ox remained constant within error as measured by electrochemical metrics. These trends were rationalized based on XAS analysis of the metal oxidation states, which were Co2.7+ and Mn3.7+ in the bulk and similar near the surface of (Co0.7Mn0.3)Ox, before and after cycling. Thus, Mn in (Co0.7Mn0.3)Ox successfully stabilized the bulk catalyst material and its surface activity during OER cycling. The development of stabilization approaches is essential to extend the durability of OER catalysts.

Surface Design Strategy of Catalysts for Water Electrolysis

Hydrogen, a new energy carrier that can replace traditional fossil fuels, is seen as one of the most promising clean energy sources. The use of renewable electricity to drive hydrogen production has very broad prospects for addressing energy and environmental problems. Therefore, many researchers favor electrolytic water due to its green and low-cost advantages. The electrolytic water reaction comprises the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Understanding the OER and HER mechanisms in acidic and alkaline processes contributes to further studying the design of surface regulation of electrolytic water catalysts. The OER and HER catalysts are mainly reviewed for defects, doping, alloying, surface reconstruction, crystal surface structure, and heterostructures. Besides, recent catalysts for overall water splitting are also reviewed. Finally, this review paves the way to the rational design and synthesis of new materials for highly efficient electrocatalysis.

Promoting biomass electrooxidation via modulating proton and oxygen anion deintercalation in hydroxide

The redox center of transition metal oxides and hydroxides is generally considered to be the metal site. Interestingly, proton and oxygen in the lattice recently are found to be actively involved in the catalytic reactions, and critically determine the reactivity. Herein, taking glycerol electrooxidation reaction as the model reaction, we reveal systematically the impact of proton and oxygen anion (de)intercalation processes on the elementary steps. Combining density functional theory calculations and advanced spectroscopy techniques, we find that doping Co into Ni-hydroxide promotes the deintercalation of proton and oxygen anion from the catalyst surface. The oxygen vacancies formed in NiCo hydroxide during glycerol electrooxidation reaction increase d-band filling on Co sites, facilitating the charge transfer from catalyst surface to cleaved molecules during the 2^nd C-C bond cleavage. Consequently, NiCo hydroxide exhibits enhanced glycerol electrooxidation activity, with a current density of 100 mA/cm² at 1.35 V and a formate selectivity of 94.3%.

Developing catalysts for biomass electrooxidation are critical in electric refinery. The reaction mechanism, however, is still ambiguous. Here, the authors reveal how proton and oxygen anion deintercalation in hydroxide determine the elementary reaction steps in a model reaction of glycerol oxidation.

High-Performance A-Site Deficient Perovskite Electrocatalyst for Rechargeable Zn–Air Battery

Zinc–air batteries are one of the most excellent of the next generation energy devices. However, their application is greatly hampered by the slow kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) of air electrode. It is of great importance to develop good oxygen electrocatalysts with long durability as well as low cost. Here, A-site deficient (SmSr)0.95Co0.9Pt0.1O3 perovskites have been studied as potential OER electrocatalysts prepared by EDTA–citrate acid complexing method. OER electrocatalytic performance of (SmSr)0.95Co0.9Pt0.1O3 was also evaluated. (SmSr)0.95Co0.9Pt0.1O3 electrocatalysts exhibited good OER activities in 0.1 M KOH with onset potential and Tafel slope of 1.50 V and 87 mV dec−1, similar to that of Ba0.5Sr0.5Co0.8Fe0.2O3 (BSCF-5582). Assembled rechargeable Zn–air batteries exhibited good discharge potential and charge potential with high stability, respectively. Overall, all results illustrated that (SmSr)0.95Co0.9Pt0.1O3 is an excellent OER electrocatalyst for zinc–air batteries. Additionally, this work opens a good way to synthesize highly efficient electrocatalysts from A-site deficient perovskites.

Activity-Stability Relationships in Oxide Electrocatalysts for Water Electrolysis

The oxygen evolution reaction (OER) is one of the key kinetically limiting half reactions in electrochemical energy conversion. Model epitaxial catalysts have emerged as a platform to identify structure-function-relationships at the atomic level, a prerequisite to establish advanced catalyst design rules. Previous work identified an inverse relationship between activity and the stability of noble metal and oxide OER catalysts in both acidic and alkaline environments: The most active catalysts for the anodic OER are chemically unstable under reaction conditions leading to fast catalyst dissolution or amorphization, while the most stable catalysts lack sufficient activity. In this perspective, we discuss the role that epitaxial catalysts play in identifying this activity-stability-dilemma and introduce examples of how they can help overcome it. After a brief review of previously observed activity-stability-relationships, we will investigate the dependence of both activity and stability as a function of crystal facet. Our experiments reveal that the inverse relationship is not universal and does not hold for all perovskite oxides in the same manner. In fact, we find that facet-controlled epitaxial La_0.6Sr_0.4CoO_3-δ catalysts follow the inverse relationship, while for LaNiO_3-δ, the (111) facet is both the most active and the most stable. In addition, we show that both activity and stability can be enhanced simultaneously by moving from La-rich to Ni-rich termination layers. These examples show that the previously observed inverse activity-stability-relationship can be overcome for select materials and through careful control of the atomic arrangement at the solid-liquid interface. This realization re-opens the search for active and stable catalysts for water electrolysis that are made from earth-abundant elements. At the same time, these results showcase that additional stabilization via material design strategies will be required to induce a general departure from inverse stability-activity relationships among the transition metal oxide catalysts to ultimately grant access to the full range of available oxides for OER catalysis.

Study on the Effect of A/B Site Co-Doping on the Oxygen Evolution Reaction Performance of Strontium Cobaltite

The perovskite oxide SrCoO3−x is a promising oxygen electrocatalyst for renewable energy storage and conversion technologies. Here, A, B-site Co-doped perovskite Sr0.5Ba0.5Co0.95Mn0.05O3−x nanoparticles were rationally designed and synthesized by the sol-gel method with an average size of 30–40 nm. It has a remarkable intrinsical activity and stability in 1 M KOH solution. Compared with other A-site (SraA1−aCoO3−x A=Ba, Ca) and B-site doped perovskite (SrCobR1−bO3−x R=Mn, Fe, Ni, B) catalysts, Sr0.5Ba0.5Co0.95Mn0.05O3−x exhibits superior oxygen evolution reaction (OER) performance, smaller Tafel slope, and lower overpotential. The high electrochemical performance of Sr0.5Ba0.5Co0.95Mn0.05O3−x is attributed to its optimized crystal structure and the increase in the content of Co3+. This study demonstrates that highly symmetrical cubic perovskite structure catalytic displays better OER performance.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Tunable metal hydroxide-organic frameworks for catalysing oxygen evolution

The oxygen evolution reaction is central to making chemicals and energy carriers using electrons. Combining the great tunability of enzymatic systems with known oxide-based catalysts can create breakthrough opportunities to achieve both high activity and stability. Here we report a series of metal hydroxide-organic frameworks (MHOFs) synthesized by transforming layered hydroxides into two-dimensional sheets crosslinked using aromatic carboxylate linkers. MHOFs act as a tunable catalytic platform for the oxygen evolution reaction, where the π-π interactions between adjacent stacked linkers dictate stability, while the nature of transition metals in the hydroxides modulates catalytic activity. Substituting Ni-based MHOFs with acidic cations or electron-withdrawing linkers enhances oxygen evolution reaction activity by over three orders of magnitude per metal site, with Fe substitution achieving a mass activity of 80 A [Formula: see text] at 0.3 V overpotential for 20 h. Density functional theory calculations correlate the enhanced oxygen evolution reaction activity with the MHOF-based modulation of Ni redox and the optimized binding of oxygenated intermediates.

Oxygen Evolution Reaction in Energy Conversion and Storage: Design Strategies Under and Beyond the Energy Scaling Relationship

The oxygen evolution reaction (OER) is the essential module in energy conversion and storage devices such as electrolyzer, rechargeable metal-air batteries and regenerative fuel cells. The adsorption energy scaling relations between the reaction intermediates, however, impose a large intrinsic overpotential and sluggish reaction kinetics on OER catalysts. Developing advanced electrocatalysts with high activity and stability based on non-noble metal materials is still a grand challenge. Central to the rational design of novel and high-efficiency catalysts is the development and understanding of quantitative structure-activity relationships, which correlate the catalytic activities with structural and electronic descriptors. This paper comprehensively reviews the benchmark descriptors for OER electrolysis, aiming to give an in-depth understanding on the origins of the electrocatalytic activity of the OER and further contribute to building the theory of electrocatalysis. Meanwhile, the cutting-edge research frontiers for proposing new OER paradigms and crucial strategies to circumvent the scaling relationship are also summarized. Challenges, opportunities and perspectives are discussed, intending to shed some light on the rational design concepts and advance the development of more efficient catalysts for enhancing OER performance.

Activating lattice oxygen in NiFe-based (oxy)hydroxide for water electrolysis

Transition metal oxides or (oxy)hydroxides have been intensively investigated as promising electrocatalysts for energy and environmental applications. Oxygen in the lattice was reported recently to actively participate in surface reactions. Herein, we report a sacrificial template-directed approach to synthesize Mo-doped NiFe (oxy)hydroxide with modulated oxygen activity as an enhanced electrocatalyst towards oxygen evolution reaction (OER). The obtained MoNiFe (oxy)hydroxide displays a high mass activity of 1910 A/g_metal at the overpotential of 300 mV. The combination of density functional theory calculations and advanced spectroscopy techniques suggests that the Mo dopant upshifts the O 2p band and weakens the metal-oxygen bond of NiFe (oxy)hydroxide, facilitating oxygen vacancy formation and shifting the reaction pathway for OER. Our results provide critical insights into the role of lattice oxygen in determining the activity of (oxy)hydroxides and demonstrate tuning oxygen activity as a promising approach for constructing highly active electrocatalysts.

Anion-Exchange Membrane Water Electrolyzers

This Review provides an overview of the emerging concepts of catalysts, membranes, and membrane electrode assemblies (MEAs) for water electrolyzers with anion-exchange membranes (AEMs), also known as zero-gap alkaline water electrolyzers. Much of the recent progress is due to improvements in materials chemistry, MEA designs, and optimized operation conditions. Research on anion-exchange polymers (AEPs) has focused on the cationic head/backbone/side-chain structures and key properties such as ionic conductivity and alkaline stability. Several approaches, such as cross-linking, microphase, and organic/inorganic composites, have been proposed to improve the anion-exchange performance and the chemical and mechanical stability of AEMs. Numerous AEMs now exceed values of 0.1 S/cm (at 60–80 °C), although the stability specifically at temperatures exceeding 60 °C needs further enhancement. The oxygen evolution reaction (OER) is still a limiting factor. An analysis of thin-layer OER data suggests that NiFe-type catalysts have the highest activity. There is debate on the active-site mechanism of the NiFe catalysts, and their long-term stability needs to be understood. Addition of Co to NiFe increases the conductivity of these catalysts. The same analysis for the hydrogen evolution reaction (HER) shows carbon-supported Pt to be dominating, although PtNi alloys and clusters of Ni(OH)₂ on Pt show competitive activities. Recent advances in forming and embedding well-dispersed Ru nanoparticles on functionalized high-surface-area carbon supports show promising HER activities. However, the stability of these catalysts under actual AEMWE operating conditions needs to be proven. The field is advancing rapidly but could benefit through the adaptation of new in situ techniques, standardized evaluation protocols for AEMWE conditions, and innovative catalyst-structure designs. Nevertheless, single AEM water electrolyzer cells have been operated for several thousand hours at temperatures and current densities as high as 60 °C and 1 A/cm², respectively.

Engineering Sulfur Vacancies in Spinel-Phase Co3S4 for Effective Electrocatalysis of the Oxygen Evolution Reaction

Restricted by the sluggish kinetics of the oxygen evolution reaction (OER), efficient OER catalysis remains a challenge. Here, a facile strategy was proposed to prepare a hollow dodecahedron constructed by vacancy-rich spinel Co₃S₄ nanoparticles in a self-generated H₂S atmosphere of thiourea. The morphology, composition, and electronic structure, especially the sulfur vacancy, of the cobalt sulfides can be regulated by the dose of thiourea. Benefitting from the H₂S atmosphere, the anion exchange process and vacancy introduction can be accomplished simultaneously. The resulting catalyst exhibits excellent catalytic activity for the OER with a low overpotential of 270 mV to reach a current density of 10 mA cm^-2 and a small Tafel slope of 59 mV dec^-1. Combined with various characterizations and electrochemical tests, the as-proposed defect engineering method could delocalize cobalt neighboring electrons and expose more Co²⁺ sites in spinel Co₃S₄, which lowers the charge transfer resistance and facilitates the formation of Co³⁺ active sites during the preactivation process. This work paves a new way for the rational design of vacancy-enriched transition metal-based catalysts toward an efficient OER.

Effect of electron structure on the catalytic activity of LaCoO3 perovskite towards toluene oxidation

LaCoO₃ perovskites with different spin states of Co³⁺ were prepared by calcination at 600-1000 °C. LaCoO₃ with electron filling in the e_g orbital at 1 exhibited a moderate interaction between the surface oxygen, resulting in the best catalytic activity. This was verified by the O p-band center.