Hygroscopic compounds in spider aggregate glue remove interfacial water to maintain adhesion in humid conditions

Acidic Environment Significantly Alters Aggregation Pathway of Human Islet Amyloid Polypeptide at Negative Lipid Membrane

The misfolding and aggregation of human islet amyloid polypeptide (hIAPP) at cell membrane has a close relationship with the development of type 2 diabetes (T2DM). This aggregation process is susceptible to various physiologically related factors, and systematic studies on condition-mediated hIAPP aggregation are therefore essential for a thorough understanding of the pathology of T2DM. In this study, we combined surface-sensitive amide I and amide II spectral signals from the protein backbone, generated simultaneously in a highly sensitive femtosecond broad-band sum frequency generation vibrational spectroscopy system, to examine the effect of environmental pH on the dynamical structural changes of hIAPP at membrane surface in situ and in real time. Such a combination can directly discriminate the formation of β-hairpin-like monomer and oligomer/fibril at the membrane surface. It is evident that, in an acidic milieu, hIAPP slows down its conformational evolution and alters its aggregation pathway, leading to the formation of off-pathway oligomers. When matured hIAPP aggregates are exposed to basic subphase, partial conversion from β-sheet oligomers into ordered β-sheet fibrillar structures is observed. When exposed to acidic environment, however, hIAPP fibrils partially converse into more loosely patterned β-sheet oligomeric structures.

Bioinspired, Microstructured Silk Fibroin Adhesives for Flexible Skin Sensors

Wearable epidermal sensors are of great importance to the next generation of personalized healthcare. The adhesion between the flexible sensor and skin surface is critical for obtaining accurate, reliable, and stable signals. Herein we present a facile approach to fabricate a microstructured, natural silk fibroin protein-based adhesive for achieving highly conformal, comfortable, adjustable, and biocompatible adhesion on the skin surface. The microstructured fibroin adhesive (MSFA) exhibits reliable and stable bonding force on skin surfaces, even under humid or wet conditions, and can be easily peeled off from the skin without causing significant pain. Such an MSFA can greatly improve the sensitivity and reusability of epidermal strain sensors because of its conformal and tunable adhesion on skin surfaces. The MFSA has a great potential to be applied as a functional adhesive for various epidermal electronic sensors in the era of personalized healthcare.

The moth specialist spider Cyrtarachne akirai uses prey scales to increase adhesion

Contaminants decrease adhesive strength by interfering with substrate contact. Spider webs adhering to moths present an ideal model to investigate how natural adhesives overcome contamination because moths' sacrificial layer of scales rubs off on sticky silk, facilitating escape. However, Cyrtarachninae spiders have evolved gluey capture threads that adhere well to moths. Cyrtarachne capture threads contain large glue droplets oversaturated with water, readily flowing but also prone to drying out. Here, we compare the spreading and adhesion of Cyrtarachne akirai glue on intact mothwings, denuded cuticle and glass to the glue of a common orb-weaving spider, Larinioides cornutus, to understand how C. akirai glue overcomes dirty surfaces. Videos show that C. akirai's glue spreading accelerates along the underlying moth cuticle after the glue seeps beneath the moth scales-not seen on denuded cuticle or hydrophilic glass. Larinioides cornutus glue droplets failed to penetrate the moth scales, their force of adhesion thus limited by the strength of attachment of scales to the cuticle. The large size and low viscosity of C. akirai glue droplets function together to use the three-dimensional topography of the moth's scales against itself via capillary forces. Infrared spectroscopy shows C. akirai glue droplets readily lose free-flowing water. We hypothesize that this loss of water leads to increased viscosity during spreading, increasing cohesive forces during pull-off. This glue's two-phase behaviour shows how natural selection can leverage a defensive specialization of prey against themselves and highlights a new design principle for synthetic adhesives for adhering to troublesome surfaces.

Properties of orb weaving spider glycoprotein glue change during Argiope trifasciata web construction

An orb web’s prey capture thread relies on its glue droplets to retain insects until a spider can subdue them. Each droplet’s viscoelastic glycoprotein adhesive core extends to dissipate the forces of prey struggle as it transfers force to stiffer, support line flagelliform fibers. In large orb webs, switchback capture thread turns are placed at the bottom of the web before a continuous capture spiral progresses from the web’s periphery to its interior. To determine if the properties of capture thread droplets change during web spinning, we characterized droplet and glycoprotein volumes and material properties from the bottom, top, middle, and inner regions of webs. Both droplet and glycoprotein volume decreased during web construction, but there was a progressive increase in the glycoprotein’s Young’s modulus and toughness. Increases in the percentage of droplet aqueous material indicated that these increases in material properties are not due to reduced glycoprotein viscosity resulting from lower droplet hygroscopicity. Instead, they may result from changes in aqueous layer compounds that condition the glycoprotein. A 6-fold difference in glycoprotein toughness and a 70-fold difference in Young’s modulus across a web documents the phenotypic plasticity of this natural adhesive and its potential to inspire new materials.

Linking properties of an orb-weaving spider's capture thread glycoprotein adhesive and flagelliform fiber components to prey retention time

An orb web's adhesive capture spiral is responsible for prey retention. This thread is formed of regularly spaced glue droplets supported by two flagelliform axial lines. Each glue droplet features a glycoprotein adhesive core covered by a hygroscopic aqueous layer, which also covers axial lines between the droplets, making the entire thread responsive to environmental humidity.We characterized the effect of relative humidity (RH) on ability of Argiope aurantia and Argiope trifasciata thread arrays to retain houseflies and characterize the effect of humidity on their droplet properties. Using these data and those of Araneus marmoreus from a previous study, we then develop a regression model that correlated glycoprotein and flagelliform fiber properties with prey retention time. The model selection process included newly determined, humidity-specific Young's modulus and toughness values for the three species' glycoproteins.Argiope aurantia droplets are more hygroscopic than A. trifasciata droplets, causing the glycoprotein within A. aurantia droplets to become oversaturated at RH greater than 55% RH and their extension to decrease, whereas A. trifasciata droplet performance increases to 72% RH. This difference is reflected in species' prey retention times, with that of A. aurantia peaking at 55% RH and that of A. trifasciata at 72% RH.Fly retention time was explained by a regression model of five variables: glue droplet distribution, flagelliform fiber work of extension, glycoprotein volume, glycoprotein thickness, and glycoprotein Young's modulus.The material properties of both glycoprotein and flagelliform fibers appear to be phylogenetically constrained, whereas natural selection can more freely act on the amount of each material invested in a thread and on components of the thread's aqueous layer. Thus, it becomes easier to understand how natural selection can tune the performance of viscous capture threads by directing small changes in these components.

Loss of Phosphate Determines the Versatility of a Spider Orb-web Glue Ball

Spiders capture their prey by weaving an "invisible" orb-web that has both adhesive and fixed properties. Different types of silk in the orb-web have different functions, wherein the key to capturing a prey is the ball-like glue (glue ball), which coats the silk strands. This glue ball has highly versatile properties, but the mechanisms leading to its versatility remain unclear. The salts found in the web have been previously suggested to play an important role in terms of viscosity, not water. However, the distribution of salt and water in the glue ball has not yet been directly observed. Here, we mapped the salts in different states using a homemade time-of-flight secondary ion mass spectrometer (TOF-SIMS) with a high lateral resolution. To our surprise, the glue ball was found to contain little water. The functional transformation of the glue ball from a viscous glycoprotein (capturing prey) to a hardened protein (retaining prey) relies solely on the stimulation of mechanical forces. The phosphate is a key factor for its versatility.

Toward Spider Glue: Long Read Scaffolding for Extreme Length and Repetitious Silk Family Genes AgSp1 and AgSp2 with Insights into Functional Adaptation

An individual orb weaving spider can spin up to seven different types of silk, each with unique functions and material properties. The capture spiral silk of classic two-dimensional aerial orb webs is coated with an amorphous glue that functions to retain prey that get caught in a web. This unique modified silk is partially comprised of spidroins (spider fibroins) encoded by two members of the silk gene family. The glue differs from solid silk fibers as it is a viscoelastic, amorphic, wet material that is responsive to environmental conditions. Most spidroins are encoded by extremely large, highly repetitive genes that cannot be sequenced using short read technology alone, as the repetitive regions are longer than read length. We sequenced for the first time the complete genomic Aggregate Spidroin 1 (AgSp1) and Aggregate Spidroin 2 (AgSp2) glue genes of orb weaving spider Argiope trifasciata using error-prone long reads to scaffold for high accuracy short reads. The massive coding sequences are 42,270 bp (AgSp1) and 20,526 bp (AgSp2) in length, the largest silk genes currently described. The majority of the predicted amino acid sequence of AgSp1 consists of two similar but distinct motifs that are repeated ∼40 times each, while AgSp2 contains ∼48 repetitions of an AgSp1-similar motif, interspersed by regions high in glutamine. Comparisons of AgSp repetitive motifs from orb web and cobweb spiders show regions of strict conservation followed by striking diversification. Glues from these two spider families have evolved contrasting material properties in adhesion (stickiness), extensibility (stretchiness), and elasticity (the ability of the material to resume its native shape), which we link to mechanisms established for related silk genes in the same family. Full-length aggregate spidroin sequences from diverse species with differing material characteristics will provide insights for designing tunable bio-inspired adhesives for a variety of unique purposes.

Organic-Inorganic Solid-State Hybridization with High-Strength and Anti-Hydrolysis Interface

Organic-inorganic material hybridization at the solid-state level is indispensable for the integration of IoT applications, but still remains a challenging issue. Existing bonding strategies in the field of electronic packaging tend to employ vacuum or ultrahigh temperature; however, these can cause process complications and material deterioration. Here we report an easy-to-tune method to achieve hybrid bonding at the solid-state level and under the ambient atmosphere. Vacuum-ultraviolet (VUV)-induced reorganization with ethanol was used to develop hydroxyl-carrying alkyl chains through coordinatively-bonded carboxylate onto aluminum, whereas numerous hydroxyl-carrying alkyls were created on polyimide. The triggering of dehydration through these hydroxyls by merely heating at 150 °C for a few minutes produced robust organic-inorganic reticulated complexes within the aluminum/polyimide interface. The as-bonded aluminum/polyimide interface possessed an superior fracture energy of (2.40 ± 0.36) × 10³ (J/m²) compared with aluminum and polyimide matrices themselves, which was mainly attributed to crack deflection due to the nano-grains of inorganic-organic reticulated complexes. The interfacial adhesion was successfully kept after humidity test, which was contributed by those anti-hydrolytic carboxylates. To the best of our knowledge, for the first time organic-inorganic bonding at the solid-state level was achieved using the ethanol-assisted VUV (E-VUV) process, a strategy which should be applicable to a diversity of plastics and metals with native oxides.