Colloidal fibers and rings by cooperative assembly

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications

Over the last three decades, photonic crystals (PhCs) have attracted intense interests thanks to their broad potential applications in optics and photonics. Generally, these structures can be fabricated via either "top-down" lithographic or "bottom-up" self-assembly approaches. The self-assembly approaches have attracted particular attention due to their low cost, simple fabrication processes, relative convenience of scaling up, and the ease of creating complex structures with nanometer precision. The self-assembled colloidal crystals (CCs), which are good candidates for PhCs, have offered unprecedented opportunities for photonics, optics, optoelectronics, sensing, energy harvesting, environmental remediation, pigments, and many other applications. The creation of high-quality CCs and their mass fabrication over large areas are the critical limiting factors for real-world applications. This paper reviews the state-of-the-art techniques in the self-assembly of colloidal particles for the fabrication of large-area high-quality CCs and CCs with unique symmetries. The first part of this review summarizes the types of defects commonly encountered in the fabrication process and their effects on the optical properties of the resultant CCs. Next, the mechanisms of the formation of cracks/defects are discussed, and a range of versatile fabrication methods to create large-area crack/defect-free two-dimensional and three-dimensional CCs are described. Meanwhile, we also shed light on both the advantages and limitations of these advanced approaches developed to fabricate high-quality CCs. The self-assembly routes and achievements in the fabrication of CCs with the ability to open a complete photonic bandgap, such as cubic diamond and pyrochlore structure CCs, are discussed as well. Then emerging applications of large-area high-quality CCs and unique photonic structures enabled by the advanced self-assembly methods are illustrated. At the end of this review, we outlook the future approaches in the fabrication of perfect CCs and highlight their novel real-world applications.

Effect of the Interaction Length on Clusters Formed by Spherical One-Patch Particles on Flat Planes

Considering that one-patch particles rotate three-dimensionally and translate on a two-dimensional flat plane, I performed isothermal-isochoric Monte Carlo simulations to study how two-dimensional self-assemblies formed by spherical patchy particles depending on the interaction length and patch area. As the interaction potential between one-patch particles, the Kern-Frenkel (KF) potential is used in the simulations. With increasing patch area, the shape of the most numerous clusters changes from dimers to island-like clusters with a square lattice via triangular trimers, square tetramers, and chain-like clusters when the interaction length is as long as the particle radius. With a longer interaction length, other shapes of polygonal clusters such as another type of square tetramers, two types of pentagonal pentamers, hexagonal hexamers, and hexagonal heptamers also form.

Two-Dimensional (2D) or Quasi-2D Superstructures from DNA-Coated Colloidal Particles

This contribution describes the synthesis of colloidal di-patch particles functionalized with DNA on the patches and their assembly into colloidal superstructures via cooperative depletion and DNA-mediated interactions. The assembly into flower-like Kagome, brick-wall like monolayer, orthogonal packed single or double layers, wrinkled monolayer, and colloidal honeycomb superstructures can be controlled by tuning the particles' patch sizes and assembly conditions. Based on these experimental results, we generate an empirical phase diagram. The principles revealed by the phase diagram provide guidance in the design of two-dimensional (2D) materials with desired superstructures. Our strategy might be translatable to the assembly of three-dimensional (3D) colloidal structures.

Self-Assembly of Patchy Colloidal Rods into Photonic Crystals Robust to Stacking Faults

Diamond-structured colloidal photonic crystals are much sought-after for their applications in visible light management because of their ability to support a complete photonic band gap (PBG). However, their realization via self-assembly pathways is a long-standing challenge. This challenge is rooted in three fundamental problems: the design of building blocks that assemble into diamond-like structures, the sensitivity of the PBG to stacking faults, and ensuring that the PBG opens at an experimentally attainable refractive index. Here we address these problems simultaneously using a multipronged computational approach. We use reverse engineering to establish the design principles for the rod-connected diamond structure (RCD), the so-called "champion" photonic crystal. We devise two distinct self-assembly routes for designer triblock patchy colloidal rods, both proceeding via tetrahedral clusters to yield a mixed phase of cubic and hexagonal polymorphs closely related to RCD. We use Monte Carlo simulations to show how these routes avoid a metastable amorphous phase. Finally, we show that both the polymorphs support spectrally overlapping PBGs. Importantly, randomly stacked hybrids of these polymorphs also display PBGs, thus circumventing the requirement of polymorph selection in a scalable fabrication method.

Effect of Site-Specific Functionalization on the Shape of Nonspherical Block Copolymer Particles

Shape-anisotropic polymeric colloids having chemically distinct compartments are promising materials, however, introducing site-specific surface functionality to block copolymer (BCP) particles has not yet been actively investigated. The current contribution demonstrates the selective surface functionalization of nanostructured, ellipsoidal polystyrene-b-polybutadiene (PS-b-PB) particle and investigate their effects on the particle shape. Photo-induced thiol-ene click reaction was used as a selective functionalization chemistry for modifying the PB block, which was achieved by controlling the feed ratio of functional thiols to the double bonds in PB. Importantly, the controlled particle elongation was observed as a function of the degree of PB functionalization. Such an increase in the aspect ratio is attributed to the (i) increased incompatibility of the PS and modified PB block and (ii) the reduced surface tension between the particles and surrounding aqueous medium, both of which contributes to the further elongation of ellipsoids. Further tunability of the elongation behavior of ellipsoids was further demonstrated by controlling the particle size and chemical structure of functional thiols, showing the versatility of this approach for controlling the particle shape. Finally, the utility of surface functionality was demonstrated by the facile complexation of fluorescent dye on the modified surface of the particle via favorable interaction, which showed stable fluorescence and colloidal dispersity.

Reconfigurable Transitions between One- and Two-Dimensional Structures with Bifunctional DNA-Coated Janus Colloids

Coating colloidal particles with DNA provides one of the most versatile and powerful methods for controlling colloidal self-assembly. Previous studies have shown how combining DNA coatings with DNA strand displacement allows one to design phase transitions between different three-dimensional crystal structures. Here we show that by using DNA coatings with bifunctional colloidal Janus particles, we can realize reconfigurable thermally reversible transitions between one- and two-dimensional self-assembled colloidal structures. We introduce a colloidal system in which DNA-coated asymmetric Janus particles can reversibly switch their Janus balance in response to temperature, resulting in the reconfiguration of assembling structures between colloidal chains and bilayers. Each face of the Janus particles is coated with different self-complementary DNA strands. Toehold strand displacement is employed to selectively activate or deactivate the sticky ends on the smaller face, which enables Janus particles to selectively assemble through either the smaller or larger face. This strategy could be useful for constructing complex systems that could be reconfigured to assemble into different structures in different environments.

Effect of Patch Area and Interaction Length on Clusters and Structures Formed by One-Patch Particles in Thin Systems

Assuming that the interaction between particles is given by the Kern-Frenkel potential, Monte Carlo simulations are performed to study the clusters and structures formed by one-patch particles in a thin space between two parallel walls. In isothermal-isochoric systems with a short interaction length, tetrahedral tetramers, octahedral hexamers, and pentagonal dipyramidal heptamers are created with increasing patch area. In isothermal-isobaric systems, the double layers of a triangular lattice, which is the (111) face of the face-centered cubic (fcc) lattice, form when the pressure is high. For a long interaction length, a different type of cluster, trigonal prismatic hexamers, is created. The structures in the double layers also changed as follows: a simple hexagonal lattice or square lattice, which is the (100) face of the fcc structure, is created in isothermal-isobaric systems.

Self-assembly behavior of experimentally realizable lobed patchy particles

We report simulation studies on the self-assembly behavior of five different types of lobed patchy particles of different shapes (snowman, dumbbell, trigonal planar, square planar, and tetrahedral). Inspired by an experimental method of synthesizing patchy particles (Wang et al., Nature, 2012, 491, 51-55), we control the lobe size indirectly by gradually varying the seed diameter and study its effect on self-assembled structures at different temperatures. Snowman shaped particles self-assemble only at a lower temperature and form two-dimensional sheets, elongated micelles, and spherical micelles, depending on the seed diameter. Each of the four other lobed particles self-assemble into four distinct morphologies (random aggregates, spherical aggregates, liquid droplets, and crystalline structures) for a given lobe size and temperature. We observed temperature-dependent transitions between two morphologies depending on the type of the lobed particle. The self-assembled structures formed by these four types of particles are porous. We show that their porosities can be tuned by controlling the lobe size and temperature.

Out-of-Equilibrium Colloidal Assembly Driven by Chemical Reaction Networks

Transient assembled structures play an indispensable role in a wide variety of processes fundamental to living organisms including cellular transport, cell motility, and proliferation. Typically, the formation of these transient structures is driven by the consumption of molecular fuels via dissipative reaction networks. In these networks, building blocks are converted from inactive precursor states to active (assembling) states by (a set of) irreversible chemical reactions. Since the activated state is intrinsically unstable and can be maintained only in the presence of sufficient fuel, fuel depletion results in the spontaneous disintegration of the formed superstructures. Consequently, the properties and behavior of these assembled structures are governed by the kinetics of fuel consumption rather than by their thermodynamic stability. This fuel dependency endows biological systems with unprecedented spatiotemporal adaptability and inherent self-healing capabilities. Fascinated by these unique material characteristics, coupling the assembly behavior to molecular fuel or light-driven reaction networks was recently implemented in synthetic (supra)molecular systems. In this invited feature article, we discuss recent studies demonstrating that dissipative assembly is not limited to the molecular world but can also be translated to building blocks of colloidal dimensions. We highlight crucial guiding principles for the successful design of dissipative colloidal systems and illustrate these with the current state of the art. Finally, we present our vision on the future of the field and how marrying nonequilibrium self-assembly with the functional properties associated with colloidal building blocks presents a promising route for the development of next-generation materials.

Controllable synthesis of patchy particles with tunable geometry and orthogonal chemistry

HYPOTHESIS

Self-assembly using anisotropic colloidal building blocks may lead to superstructures similar to those found in molecular systems yet can have unique optical, electronic, and structural properties. To widen the spectrum of achievable superstructures and related properties, significant effort was devoted to the synthesis of new types of colloidal particles. Despite these efforts, the preparation of anisotropic colloids carrying chemically orthogonal anchor groups on distinct surface patches remains an elusive challenge.

EXPERIMENTS

We report a simple yet effective method for synthesizing patchy particles via seed-mediated heterogeneous nucleation. Key to this procedure is the use of 3-(trimethoxysilyl)propyl methacrylate (TPM) or 3-(trimethoxysilyl)propyl acrylate (TMSPA), which can form patches on a variety of functional polymer seeds via a nucleation and growth mechanism.

FINDINGS

A family of anisotropic colloids with tunable numbers of patches and patch arrangements were prepared. By continuously feeding TPM or TMSPA the geometry of the colloids could be adjusted accurately. Furthermore, the patches could be reshaped by selectively polymerizing and/or solvating the individual colloidal compartments. Relying on the chemically distinct properties of the TPM/TMSPA and seed-derived domains, both types of patches could be functionalized independently. Combining detailed control over the patch chemistry and geometry opens new avenues for colloidal self-assembly.

Phase diagram of two-patch colloids with competing anisotropic and isotropic interactions

Patchy particles are considered to be a good model for protein aggregation. We propose a novel method to generate different structures of glucose isomerase protein such as chains, crystals and bundles by utilising aggregation of two-patch colloidal particles in presence of competing isotropic and anisotropic potential. We calculate the equilibrium phase diagram of two-patch colloidal particles and demonstrates the coexistence of different phases like disordered clusters, chains, crystals and bundles depending on the relative strength of isotropic and anisotropic potential. We also show that the formation of network of bundles is metastable against the formation of thermodynamically favored finite sized bundles along with thermodynamically stable crystals. These bundles appear to be helical in structure similar to that observed in sickle cell hemoglobin. The simulation results show that the method can characterize phase behaviour of glucose isomerase protein, which provides a novel tool to unveil self-assembly mechanism of protein under different conditions.

Self-Assembly of Colloidal Molecules Based on Host-Guest Chemistry and Geometric Constraints

The preparation of colloidal molecules (CMs), that is, clusters of colloids with a defined aggregation number and configuration, is of continued and significant interest in colloid chemistry and materials science and numerous interactions have been utilized to drive their (self-)assembly. However, only very few reports are available on the assembly of CMs based on host-guest chemistry. In this paper, we investigate the assembly of like-charged silica particles into well-defined, core-satellite AB_n-type CMs in water, mediated by host-guest interactions and geometric constraints. Exploiting the inherent dynamics of noncovalent attraction and making use of a soft polymer shell to enhance multivalent host-guest interactions, we successfully synthesized AB₃, AB₄, and AB₆ CMs by selecting the appropriate size ratio of satellite to core particles.

High-Density DNA Coatings on Carboxylated Colloids by DMTMM- and Azide-Mediated Coupling Reactions

DNA-mediated colloidal interactions provide a powerful strategy for the self-assembly of ordered superstructures. We report a practical and efficient two-step chemical method to graft DNA brushes onto carboxylated particles, which resolves the previously reported issues such as irreversible aggregation, inhomogeneous coating, and relatively low DNA density that can hinder colloidal crystallization. First, carboxylated particles are functionalized with heterobifunctional poly(ethylene glycol) (NH₂-PEG_n-N₃) by 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM)-activated esterification of carboxylic groups and amide coupling. Then, dibenzocyclooctyne (DBCO)-functionalized DNA strands are grafted onto the pegylated particles through strain-promoted alkyne-azide cycloaddition (SPAAC) on azide groups. The homogeneous PEG brushes provide dispersion stability to the particles and clickable functional groups, resulting in DNA coatings of 1 100 000 DNA per 1 μm particle or 1 DNA per 2.9 nm², about five times higher than previously reported. The DNA-coated particles exhibit a sharp association-dissociation transition and readily self-assemble into colloidal crystals upon annealing. In addition, fluorinated particles and lens-shaped particles with carboxylate groups are successfully grafted with DNA strands in this manner. Janus particles are also functionalized with DNA strands selectively on one of the two faces. Owing to the anisotropic attraction, the DNA-coated Janus particles self-assemble into self-limiting aggregates.

Effective pair interaction of patchy particles in critical fluids

We study the critical Casimir interaction between two spherical colloids immersed in a binary liquid mixture close to its critical demixing point. The surface of each colloid prefers one species of the mixture with the exception of a circular patch of arbitrary size, where the other species is preferred. For such objects, we calculate, within the Derjaguin approximation, the scaling function describing the critical Casimir potential, and we use it to derive the scaling functions for all components of the forces and torques acting on both colloids. The results are compared with available experimental data. Moreover, the general relation between the scaling function for the potential and the scaling functions for the force and the torque is derived.

Synthesis of AB n -type colloidal molecules by polymerization-induced particle-assembly (PIPA)

Conventional synthesis of colloidal molecules (CMs) mainly depends on particle-based self-assembly of patchy building blocks. However, direct access to CMs by the self-assembly of isotropic colloidal subunits remains challenging. Here, we report the mass production of AB n -type CMs by polymerization-induced particle-assembly (PIPA), using a linear ABC triblock terpolymer system. Starting from diblock copolymer spheres, the association of spheres takes place in situ during the polymerization of the third block. The third blocks aggregate into attractive domains, which connect spheres into CMs. The stability of CMs is ensured, as long as the conversions are limited to ca. 50%, and the pH is low. The valence of AB n -type CMs (n = 2-6) is determined by the volume ratio of the polymer blocks. By tuning the volume ratio, 78.5% linear AB2-type CMs are yielded. We demonstrate that polymerization-induced particle-assembly is successful for the scalable fabrication of AB n -type CMs (50 g L-1), and can be easily extended to vastly different triblock terpolymers, for a wide range of applications.

Colloidal molecules and patchy particles: complementary concepts, synthesis and self-assembly

About the latest developments regarding self-assembly of textured colloids and its prospects.