Towards metal-organic framework based field effect chemical sensors: UiO-66-NH2 for nerve agent detection

Adsorption and Detection of Hazardous Trace Gases by Metal-Organic Frameworks

The quest for advanced designer adsorbents for air filtration and monitoring hazardous trace gases has recently been more and more driven by the need to ensure clean air in indoor, outdoor, and industrial environments. How to increase safety with regard to personal protection in the event of hazardous gas exposure is a critical question for an ever-growing population spending most of their lifetime indoors, but is also crucial for the chemical industry in order to protect future generations of employees from potential hazards. Metal-organic frameworks (MOFs) are already quite advanced and promising in terms of capacity and specific affinity to overcome limitations of current adsorbent materials for trace and toxic gas adsorption. Due to their advantageous features (e.g., high specific surface area, catalytic activity, tailorable pore sizes, structural diversity, and range of chemical and physical properties), MOFs offer a high potential as adsorbents for air filtration and monitoring of hazardous trace gases. Three advanced topics are considered here, in applying MOFs for selective adsorption: (i) toxic gas adsorption toward filtration for respiratory protection as well as indoor and cabin air, (ii) enrichment of hazardous gases using MOFs, and (iii) MOFs as sensors for toxic trace gases and explosives.

Electronic metal–organic framework sensors

This review provides an overview on the different types of electronic MOF sensors used for the detection of molecules in the gas/vapour phase and how to assess their performances.

Operando study of palladium nanoparticles inside UiO-67 MOF for catalytic hydrogenation of hydrocarbons

Formation of Pd nanoparticles inside UiO-67 MOF was monitored by in situ X-ray absorption and diffraction.

An efficient strategy for improving the luminescent sensing performance of a terbium(iii) metal–organic framework towards multiple substances

A new luminescent Ln-MOF-based sensor with hydrolytic stability has been successfully prepared.

A robust monolithic metal–organic framework with hierarchical porosity

Mechanically robust centimetric single-piece MOF monoliths with hierarchical porosity.

Drawing Sensors with Ball-Milled Blends of Metal-Organic Frameworks and Graphite

The synthetically tunable properties and intrinsic porosity of conductive metal-organic frameworks (MOFs) make them promising materials for transducing selective interactions with gaseous analytes in an electrically addressable platform. Consequently, conductive MOFs are valuable functional materials with high potential utility in chemical detection. The implementation of these materials, however, is limited by the available methods for device incorporation due to their poor solubility and moderate electrical conductivity. This manuscript describes a straightforward method for the integration of moderately conductive MOFs into chemiresistive sensors by mechanical abrasion. To improve electrical contacts, blends of MOFs with graphite were generated using a solvent-free ball-milling procedure. While most bulk powders of pure conductive MOFs were difficult to integrate into devices directly via mechanical abrasion, the compressed solid-state MOF/graphite blends were easily abraded onto the surface of paper substrates equipped with gold electrodes to generate functional sensors. This method was used to prepare an array of chemiresistors, from four conductive MOFs, capable of detecting and differentiating NH₃, H₂S and NO at parts-per-million concentrations.

Degradation of Paraoxon and the Chemical Warfare Agents VX, Tabun, and Soman by the Metal-Organic Frameworks UiO-66-NH2, MOF-808, NU-1000, and PCN-777

In recent years, Zr-based metal-organic frameworks (MOFs) have been developed that facilitate catalytic degradation of toxic organophosphate agents, such as chemical warfare agents (CWAs). Because of strict regulations, experiments using live agents are not possible for most laboratories and, as a result, simulants are used in the majority of cases. Reports that employ real CWAs are scarce and do not cover the whole spectrum of agents. We here present a comparative study in which UiO-66-NH₂, NU-1000, MOF-808, and PCN-777 are evaluated for their effectiveness in the degradation of paraoxon and the chemical warfare agents tabun, VX, and soman, in N-ethylmorpholine buffer (pH 10) as well as in pure water. All MOFs showed excellent ability to degrade the agents under basic conditions. It was further disclosed that tabun is degraded by different mechanisms depending on the conditions. The presence of an amine, either as part of the MOF structure (UiO-66-NH₂) or in the agent itself (VX, tabun), is the most important factor governing degradation rates in water. The results show that MOFs have great potential in future protective applications. Although the use of simulants provides valuable information for initial screening and selection of new MOFs, the use of live agents revealed additional mechanisms that should aid the future development of even better catalysts.

Sensitive and Reversible Detection of Methanol and Water Vapor by In Situ Electrochemically Grown CuBTC MOFs on Interdigitated Electrodes

The in situ electrochemical growth of Cu benzene-1,3,5-tricarboxylate (CuBTC) metal-organic frameworks, as an affinity layer, directly on custom-fabricated Cu interdigitated electrodes (IDEs) is described, acting as a transducer. Crystalline 5-7 µm thick CuBTC layers are grown on IDEs consisting of 100 electrodes with a width and a gap of both 50 µm and a height of 6-8 µm. These capacitive sensors are exposed to methanol and water vapor at 30 °C. The affinities show to be completely reversible with higher affinity toward water compared to methanol. For exposure to 1000 ppm methanol, a fast response is observed with a capacitance change of 5.57 pF at equilibrium. The capacitance increases in time followed diffusion-controlled kinetics (k = 2.9 mmol s^-0.5 g^-1_CuBTC ). The observed capacitance change with methanol concentration follows a Langmuir adsorption isotherm, with a value for the equilibrium affinity K_e = 174.8 bar^-1 . A volume fraction f_MeOH = 0.038 is occupied upon exposure to 1000 ppm of methanol. The thin CuBTC affinity layer on the Cu-IDEs shows fast, reversible, and sensitive responses to methanol and water vapor, enabling quantitative detection in the range of 100-8000 ppm.

Chemical Warfare Agents Detoxification Properties of Zirconium Metal-Organic Frameworks by Synergistic Incorporation of Nucleophilic and Basic Sites

The development of protective self-detoxifying materials is an important societal challenge to counteract risk of attacks employing highly toxic chemical warfare agents (CWAs). In this work, we have developed bifunctional zirconium metal-organic frameworks (MOFs) incorporating variable amounts of nucleophilic amino residues by means of formation of the mixed ligand [Zr₆O₄(OH)₄(bdc)_6(1-x)(bdc-NH₂)_6x] (UiO-66-xNH₂) and [Zr₆O₄(OH)₄(bpdc)_6(1-x)(bpdc-(NH₂)₂)_6x] (UiO-67-x(NH₂)₂) systems where bdc = benzene-1,4-dicarboxylate; bdc-NH₂= benzene-2-amino-1,4-dicarboxylate; bpdc = 4,4'-biphenyldicarboxylate; bpdc-(NH₂)₂ = 2,2'-diamino-4,4'-biphenyldicarboxylate and x = 0, 0.25, 0.5, 0.75, 1. In a second step, the UiO-66-xNH₂ and UiO-67-x(NH₂)₂ systems have been postsynthetically modified by introduction of highly basic lithium tert-butoxide (LiO^tBu) on the oxohydroxometallic clusters of the mixed ligand MOFs to yield UiO-66-xNH₂@LiO^tBu and UiO-67-x(NH₂)₂@LiO^tBu materials. The results show that the combination of pre and postsynthetic modifications on these MOF series gives rise to fine-tuning of the catalytic activity toward the hydrolytic degradation of both simulants and real CWAs in unbuffered aqueous solutions. Indeed, UiO-66-0.25NH₂@LiO^tBu is able to hydrolyze both CWAs simulants (diisopropylfluorophosphate (DIFP), 2-chloroethylethylsulfide (CEES), and real CWAs (soman (GD), sulfur mustard (HD)) quickly in aqueous solution. These results are related to a suitable combination of robustness, nucleophilicity, basicity, and accessibility to the porous framework.

Metal-Organic Frameworks as Active Materials in Electronic Sensor Devices

In the past decade, advances in electrically conductive metal–organic frameworks (MOFs) and MOF-based electronic devices have created new opportunities for the development of next-generation sensors. Here we review this rapidly-growing field, with a focus on the different types of device configurations that have allowed for the use of MOFs as active components of electronic sensor devices.

Selective sulfur dioxide adsorption on crystal defect sites on an isoreticular metal organic framework series

The widespread emissions of toxic gases from fossil fuel combustion represent major welfare risks. Here we report the improvement of the selective sulfur dioxide capture from flue gas emissions of isoreticular nickel pyrazolate metal organic frameworks through the sequential introduction of missing-linker defects and extra-framework barium cations. The results and feasibility of the defect pore engineering carried out are quantified through a combination of dynamic adsorption experiments, X-ray diffraction, electron microscopy and density functional theory calculations. The increased sulfur dioxide adsorption capacities and energies as well as the sulfur dioxide/carbon dioxide partition coefficients values of defective materials compared to original non-defective ones are related to the missing linkers enhanced pore accessibility and to the specificity of sulfur dioxide interactions with crystal defect sites. The selective sulfur dioxide adsorption on defects indicates the potential of fine-tuning the functional properties of metal organic frameworks through the deliberate creation of defects.

The widespread emission of sulfur oxide gases from fossil fuel combustion presents major health risks. Here, the authors show that the selective sulfur dioxide capture performance of a metal organic framework is improved by the introduction of missing linker defects and extra-framework barium cations.

Two Lanthanide Metal-Organic Frameworks as Remarkably Selective and Sensitive Bifunctional Luminescence Sensor for Metal Ions and Small Organic Molecules

Two lanthanide metal-organic frameworks (Ln-MOFs) with similar structures have been synthesized through objective synthesis. The two compounds are both 2-fold interpenetrating 3D frameworks. Topological analyses reveal that complexes 1 and 2 are 6-connected pcu net. In addition, both structures were embedded in uncoordinated nitrogen atoms. As the uncoordinated pyridine groups can be used as functional groups, we tested their sensing ability toward metal ions and small organic molecules. To our delight, fluorescence measurements show the two complexes can selectively and sensitively detect for Fe³⁺ ion and nitromethane, which suggests that the two Ln-MOFs are promising bifunctional luminescence sensor materials with sensing metal ions and small organic molecules.

Metal–organic frameworks for the removal of toxic industrial chemicals and chemical warfare agents

Toxic gases can be captured or degraded by metal–organic frameworks.

The duality of UiO-67-Pt MOFs: connecting treatment conditions and encapsulated Pt species by operando XAS

XAS study of Pt-functionalized UiO-67 MOFs shows that 2 types of catalytically active sites can be formed in MOF cavities isolated Pt-complexes and Pt nanoparticles.

Tuning the stability of bimetallic Ce(iv)/Zr(iv)-based MOFs with UiO-66 and MOF-808 structures

A series of solid solutions of bimetallic Ce/Zr-UiO-66 and -MOF-808 compounds with a varying ratio of Ce⁴⁺ to Zr⁴⁺ were obtained under mild reaction conditions within 15 min. Samples with Ce ≤20 at% exhibit an enhanced thermal stability, better resistance against acids and smaller particle sizes.

An updated roadmap for the integration of metal–organic frameworks with electronic devices and chemical sensors

This review highlights the steps needed to bring the properties of MOFs from the chemical lab to the microelectronics fab.

Metal–organic frameworks: functional luminescent and photonic materials for sensing applications

This review summarizes the diverse routes to derive sensing applications from suitably functionalized and crystal-engineered metal–organic framework (MOF) materials, either by fluorometric responses, or based on photonic crystal-based signal transduction.

Discrimination of tabun mimic diethyl cyanophosphonate from sarin mimic diethyl chlorophosphate via Zn(ii)-triggered photoinduced electron transfer-decoupled excited state intramolecular proton transfer processes

PET-coupled ESIPT platform and its Zn²⁺ complex are used for the discrimination of the nerve agent mimics DCNP and DCP.