Insight into Organometallic-Mediated Radical Polymerization

Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications

The use of light to mediate controlled radical polymerization has emerged as a powerful strategy for rational polymer synthesis and advanced materials fabrication. This review provides a comprehensive survey of photocontrolled, living radical polymerizations (photo-CRPs). From the perspective of mechanism, all known photo-CRPs are divided into either (1) intramolecular photochemical processes or (2) photoredox processes. Within these mechanistic regimes, a large number of methods are summarized and further classified into subcategories based on the specific reagents, catalysts, etc., involved. To provide a clear understanding of each subcategory, reaction mechanisms are discussed. In addition, applications of photo-CRP reported so far, which include surface fabrication, particle preparation, photoresponsive gel design, and continuous flow technology, are summarized. We hope this review will not only provide informative knowledge to researchers in this field but also stimulate new ideas and applications to further advance photocontrolled reactions.

The limits of precision monomer placement in chain growth polymerization

Precise control over the location of monomers in a polymer chain has been described as the ‘Holy Grail' of polymer synthesis. Controlled chain growth polymerization techniques have brought this goal closer, allowing the preparation of multiblock copolymers with ordered sequences of functional monomers. Such structures have promising applications ranging from medicine to materials engineering. Here we show, however, that the statistical nature of chain growth polymerization places strong limits on the control that can be obtained. We demonstrate that monomer locations are distributed according to surprisingly simple laws related to the Poisson or beta distributions. The degree of control is quantified in terms of the yield of the desired structure and the standard deviation of the appropriate distribution, allowing comparison between different synthetic techniques. This analysis establishes experimental requirements for the design of polymeric chains with controlled sequence of functionalities, which balance precise control of structure with simplicity of synthesis.

Chemists increasingly seek to control monomer sequencing in aperiodic copolymers. Here, the authors show that the statistical nature of chain growth strongly limits the achievable control, and establish parameters for polymer design that balance precise control with simplicity of synthesis.

A phosphonium intermediate for cationic RAFT polymerization

Phosphates and phosphinates mediate cationic RAFT polymerization of vinyl ethers with a small amount of triflic acid via a phosphonium intermediate.

Cobalt(iii) and copper(ii) hydrides at the crossroad of catalysed chain transfer and catalysed radical termination: a DFT study

The article analyses the reactivity dichotomy leading different metal hydrides generated by H atom transfer in metal-mediated radical polymerization to preferentially yield catalysed chain transfer or radical termination by reaction with a monomer or a radical.

When CMRP met alkyl vinyl ketone: visible light induced living radical polymerization (LRP) of ethyl vinyl ketone (EVK)

Photo responsive polyethyl vinyl ketone (PEVK) and various block copolymers were prepared through the visible light induced cobalt mediated radical polymerization (CMRP) process.

Direct one-pot synthesis of poly(ionic liquid) nanogels by cobalt-mediated radical cross-linking copolymerization in organic or aqueous media

Nanogels of controlled kinetic chain length were synthesized by cobalt-mediated radical cross-linking copolymerization (CMRccP) involving a vinyl monomer and a divinyl cross-linker.

Dispersion polymerization of acrylamide with living character and controlled morphologies initiated and mediated by cobalt porphyrin

Dispersion polymerization of acrylamide (AM) catalyzed by cobalt porphyrin [cobalt tetramethoxyphenylporphyrin, (TMOP)Co(ii)] with the feature of living radical polymerization (LRP) in alcohol/water or dimethylformamide (DMF)/water is described.

Redox Active Compounds in Controlled Radical Polymerization and Dye-Sensitized Solar Cells: Mutual Solutions to Disparate Problems

Controlled radical polymerization (CRP) and dye-sensitized solar cells (DSSCs) are two fields of research that at an initial glance appear to have little in common. However, despite their obvious differences, both in application and in scientific nature, a closer look reveals a striking similarity between many of the compounds widely used as control agents in radical polymerization and as redox couples in dye-sensitized solar cells. Herein, we review the various redox active compounds used and examine the characteristics that give them the ability to perform this dual function. In addition we explore the advances in the understanding of the structural features that enhance their activity in both CRP and DSSCs. It is hoped that such a comparison will be conducive to improving process performance in both fields.

Poly(vinyl ester 1,2,3-triazolium)s: a new member of the poly(ionic liquid)s family

A vinyl ester monomer carrying a pendant 1,2,3-triazole group is synthesized in two steps and polymerized by cobalt-mediated radical polymerization. Subsequent alkylation with N-methyl bis[(trifluoromethyl)sulfonyl]imide affords the corresponding poly(vinyl ester 1,2,3-triazolium). This unprecedented example of poly(vinyl ester ionic liquid) exhibits an ionic conductivity of 9.2 × 10(-7) S cm(-1) at 30 °C.

A well-defined, versatile photoinitiator (salen)Co-CO2CH3 for visible light-initiated living/controlled radical polymerization

The control of the polymerization of a wide range of monomers under mild conditions by a single catalyst remains a major challenge in polymer science. We report a versatile, well-defined organocobalt salen complex to control living radical polymerization of different categories of monomers, including acrylates, acrylamides and vinyl acetate, under visible light irradiation at ambient temperature. Both household light and sunlight were effectively applied in the synthesis of polymers with controlled molecular weights and narrow polydispersities. Narrowly dispersed block copolymers (Mw/Mn < 1.2) were obtained under various conditions. The structures of the polymers were analyzed by 1H NMR, 2D NMR, 13C NMR, GPC, MALDI-TOF-MS and isotopic labeling experiments, which showed that the ω and α ends of the polymer chains were capped with (salen)Co and -CO2CH3 segments, respectively, from the photoinitiator (salen)Co-CO2CH3. The ω end was easily functionalized through oxygen insertion followed by hydrolysis from 18O2 to -18OH. This robust system can proceed without any additives, and offers a versatile and green way to produce well-defined homo and block copolymers.

Iron-catalyzed atom transfer radical polymerization

This article reviews the preparation of polymers using iron-catalyzed atom transfer radical polymerization.

Halomethyl-cobalt(bis-acetylacetonate) for the controlled synthesis of functional polymers

We report a novel synthesis of organocobalts bearing a weak C–Co bond, and their utility in the precision synthesis of functional polymers.

Living radical polymerization of vinyl acetate mediated by iron(iii) acetylacetonate in the presence of a reducing agent

The Fe(acac)₃-mediated OMRPs of VAc in the presence of a reducing agent were reported.

Design of hybrid nanovehicles for remotely triggered drug release: an overview

This review addresses the advantages of remote triggers, e.g. ultrasounds, near infrared light and alternating magnetic fields, the fabrication of the hybrid nanovehicles, the release mechanisms and the next challenges.

Improved photo-induced cobalt-mediated radical polymerization in continuous flow photoreactors

The implementation of cobalt-mediated radical polymerization (CMRP) for continuous microflow reactor synthesis is described.

Poly(N-vinylcaprolactam): a thermoresponsive macromolecule with promising future in biomedical field

Poly(N-vinylcaprolactam) (PNVCL) is a thermoresponsive and biocompatible polymer that raises an increasing interest in the biomedical area, especially in drug delivery systems (DDS) that include micelles, hydrogels, and hybrid particles. The thermoresponsiveness of PNVCL, used alone or in combination with other stimuli- responsive polymers or particles (pH, magnetic field, or chemicals), is often key in the loading and/or release process in these DDS. The renewed focus on this polymer, which is known for decades, is to a large extent due to recent progress in synthetic strategies. Especially, the advent of efficient controlled radical polymerization (CRP) methods for NVCL monomer gives now access to unprecedented well-defined NVCL-based copolymers with unique properties. This Review article addresses up-to-date synthetic aspects, biological features, and biomedical applications of the latest NVCL-containing systems.

Tuning ligand electronics and peripheral substitution on cobalt salen complexes: structure and polymerisation activity

A series of cobalt salen complexes, where salen represents an N2O2 bis-Schiff-base bis-phenolate framework, are prepared, characterised and investigated for reversible-termination organometallic mediated radical polymerisation (RT-OMRP). The salen ligands contain a cyclohexane diimine bridge and systematically altered para-substituted phenoxide moieties as a method to examine the electronic impact of the ligand on complex structure and reactivity. The complexes are characterised by single crystal X-ray diffraction, cyclic voltammetry, X-ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy and computational methods. Structural studies all support a tailorable metal centre reactivity altered by the electron-donating ability of the salen ligand. RT-OMRP of styrene, methyl methacrylate and vinyl acetate is reported and suggests that cobalt-carbon bond strength varies with the ligand substitution. Competing β-hydrogen abstraction affords long-chain olefin-terminated polymer chains and well controlled vinyl acetate polymerisations, contrasting with the lower temperature associative exchange mechanism of degenerative transfer OMRP.

Expanding the Scope of Controlled Radical Polymerization via Cobalt-Tellurium Radical Exchange Reaction

Cobalt-mediated radical polymerization (CMRP) and tellurium-mediated radical polymerization (TERP) were combined for the first time, offering new perspectives in the precision design of macromolecular structures. In particular, the present work highlights the benefits of this strategy for the synthesis of novel poly(vinyl acetate)-based block copolymers. A range of well-defined poly(vinyl acetate)s (PVAc) were first produced via CMRP using the bis(acetylacetonato)cobalt(II) complex (Co(acac)₂) as a regulating agent. Substitution of a methyltellanyl moiety for Co(acac)₂ at the ω-chain end of the precursor was then achieved upon treatment with dimethylditelluride. In contrast to the PVAc prepared by TERP, the ones produced by sequential CMRP and Co/Te exchange reaction almost exclusively consist of regular head-to-tail-TeMe chain-end species that can be activated by TERP. Ultimately, a series of monomers problematic in Co(acac)₂-mediated radical polymerization including N-isopropylacrylamide (NIPAM), 2-(dimethylamino)ethyl acrylate (ADAME), n-butyl acrylate (BA), isoprene (IP), and vinylimidazole (NVIm) were polymerized by TERP from the PVAc-TeMe macroinitiators leading to novel diblock copolymers that cannot be made by each technique used separately.

Double thermoresponsive di- and triblock copolymers based on N-vinylcaprolactam and N-vinylpyrrolidone: synthesis and comparative study of solution behaviour

Controlled radical polymerization produces poly(N-vinylamide)s with thermally induced multistep assembly.

Reversibly crosslinked thermo- and redox-responsive nanogels for controlled drug release

Reversibly crosslinked thermo- and redox-responsive PVOH-b-PNVCL nanogels designed for controlled drug release.

Thermo-responsive gold/poly(vinyl alcohol)-b-poly(N-vinylcaprolactam) core–corona nanoparticles as a drug delivery system

Preparation of thermo-responsive poly(vinyl alcohol)-b-poly(N-vinylcaprolactam) copolymer-stabilized gold nanoparticles for drug delivery.

(Co)Polymerization of vinyl levulinate by cobalt-mediated radical polymerization and functionalization by ketoxime click chemistry

(Co)polymerization of vinyl levulinate (with vinyl acetate) by cobalt-mediated radical polymerization affords well-defined poly(vinyl ester)s. Pendant ketone functionalities are conjugated by ketoxime click chemistry.