Thermodynamically stable pickering emulsions

l-Arginine-Catalyzed Synthesis of Nanometric Organosilica Particles through a Waterborne Sol-Gel Process and Their Porous Structure Analysis

We report an efficient and easy-to-implement waterborne sol-gel process for the synthesis of nanometric organosilica particles. In this process, tetraethyl orthosilicate (TEOS) and 3-(methacryloxy)propyl trimethoxy silane (γ-MPS), employed as silica sources, were heterogeneously delivered in an aqueous solution of l-arginine, a basic amino acid used as a catalyst, from a top organic layer. Co-condensation of TEOS with γ-MPS led to the formation of organosilica particles with diameters between 30 and 230 nm when increasing the γ-MPS content from 0 to 10.1 mol % in the silica source. Nitrogen sorption analyses confirmed the microporous nature of the obtained particles after calcination. The Brunauer-Emmett-Teller (BET) surface areas increased from 27 (before calcination) to 684 m² g^-1 (after calcination) for the organosilica particles containing 10.1 mol % of γ-MPS. Fourier transform infrared spectroscopy and ²⁹Si NMR were employed to analyze the chemical structure of the organosilica spheres and provide insight into the mechanism of particle formation. In the second part, hybrid organosilica particles with a core-shell morphology were synthesized through the combination of Pickering emulsion and the sol-gel process. γ-MPS emulsion droplets stabilized by tiny silica particles (formed in a separate step) were first generated and used as seeds to grow a silica shell on their surface through TEOS addition from the top organic layer. Transmission electron microscopy and pore size analyses of the resulting particles after calcination revealed a unique dual-porosity structure with a mesoporous inner core and a micro/mesoporous silica shell with ink-bottle-type pores.

Perspective: Outstanding theoretical questions in polymer-nanoparticle hybrids

This topical review discusses the theoretical progress made in the field of polymer nanocomposites, i.e., hybrid materials created by mixing (typically inorganic) nanoparticles (NPs) with organic polymers. It primarily focuses on the outstanding issues in this field and is structured around five separate topics: (i) the synthesis of functionalized nanoparticles; (ii) their phase behavior when mixed with a homopolymer matrix and their assembly into well-defined superstructures; (iii) the role of processing on the structures realized by these hybrid materials and the role of the mobilities of the different constituents; (iv) the role of external fields (electric, magnetic) in the active assembly of the NPs; and (v) the engineering properties that result and the factors that control them. While the most is known about topic (ii), we believe that significant progress needs to be made in the other four topics before the practical promise offered by these materials can be realized. This review delineates the most pressing issues on these topics and poses specific questions that we believe need to be addressed in the immediate future.

Colloidal Particle Adsorption at Water-Water Interfaces with Ultralow Interfacial Tension

Using fluorescence confocal microscopy we study the adsorption of single latex microparticles at a water-water interface between demixing aqueous solutions of polymers, generally known as a water-in-water emulsion. Similar microparticles at the interface between molecular liquids have exhibited an extremely slow relaxation preventing the observation of expected equilibrium states. This phenomenon has been attributed to "long-lived" metastable states caused by significant energy barriers ΔF∼γA_{d}≫k_{B}T induced by high interfacial tension (γ∼10^{-2}  N/m) and nanoscale surface defects with characteristic areas A_{d}≃10-30  nm^{2}. For the studied water-water interface with ultralow surface tension (γ∼10^{-4}  N/m) we are able to characterize the entire adsorption process and observe equilibrium states prescribed by a single equilibrium contact angle independent of the particle size. Notably, we observe crossovers from fast initial dynamics to slower kinetic regimes analytically predicted for large surface defects (A_{d}≃500  nm^{2}). Moreover, particle trajectories reveal a position-independent damping coefficient that is unexpected given the large viscosity contrast between phases. These observations are attributed to the remarkably diffuse nature of the water-water interface and the adsorption and entanglement of polymer chains in the semidilute solutions. This work offers some first insights on the adsorption dynamics or kinetics of microparticles at water-water interfaces in biocolloidal systems.

Controlling the Size of Two-Dimensional Polymer Platelets for Water-in-Water Emulsifiers

A wide range of biorelevant applications, particularly in pharmaceutical formulations and the food and cosmetic industries, require the stabilization of two water-soluble blended components which would otherwise form incompatible biphasic mixtures. Such water-in-water emulsions can be achieved using Pickering stabilization, where two-dimensional (2D) nanomaterials are particularly effective due to their high surface area. However, control over the shape and size of the 2D nanomaterials is challenging, where it has not yet been possible to examine chemically identical nanostructures with the same thickness but different surface areas to probe the size-effect on emulsion stabilization ability. Hence, the rationale design and realization of the full potential of Pickering water-in-water emulsion stabilization have not yet been achieved. Herein, we report for the first time 2D poly(lactide) platelets with tunable sizes (with varying coronal chemistry) and of uniform shape using a crystallization-driven self-assembly methodology. We have used this series of nanostructures to explore the effect of 2D platelet size and chemistry on the stabilization of a water-in-water emulsion of a poly(ethylene glycol) (PEG)/dextran mixture. We have demonstrated that cationic, zwitterionic, and neutral large platelets (ca. 3.7 × 106 nm2) all attain smaller droplet sizes and more stable emulsions than their respective smaller platelets (ca. 1.2 × 105 nm2). This series of 2D platelets of controlled dimensions provides an excellent exemplar system for the investigation of the effect of just the surface area on the potential effectiveness in a particular application.

Self-assembly of cubic colloidal particles at fluid-fluid interfaces by hexapolar capillary interactions

Colloidal particles adsorbed at fluid-fluid interfaces can self-assemble, thanks to capillary interactions, into 2D ordered structures. Recently, it has been predicted by theoretical and numerical calculations [G. Soligno et al., Phys. Rev. Lett., 2016, 116, 258001] that cubes with smooth edges adsorbed at a flat fluid-fluid interface generate hexapolar capillary deformations that cause the particles to self-assemble into honeycomb and hexagonal lattices, at equilibrium and for Young's contact angle π/2. Here we extend these results. Firstly, we show that capillary interactions induced by hexapolar deformations can drive the particles at the interface to form also thermodynamically-stable square lattices, in addition to honeycomb and hexagonal lattices. Then, we study the effects of tuning the particle shape on the particle self-assembly at the interface, considering, respectively, smooth-edge cubes, sharp-edge cubes, slightly truncated-edge cubes, and highly truncated-edge cubes. In our calculations, both capillary and hard-particle interactions are taken into account. We show that such variations in the particle shape significantly affect both qualitatively and quantitatively the self-assembly of the particles at the interface, and we sum up our results in the form of temperature-density phase diagrams. For example, using typical experimental parameters, our results show that only 4-to-5 nm sized sharp-edge and smooth-edge cubes can self-assemble into a honeycomb lattice, while slightly and highly truncated-edge cubes can form a honeycomb lattice only if they have a 8-to-12 and 10-to-16 nm size, respectively, for the same experimental parameters. Also, our results show that the capillarity-induced square lattice phase is stable only for the smooth-edge and truncated-edge cubes, but not for the sharp-edge cubes.

Bespoke Diblock Copolymer Nanoparticles Enable the Production of Relatively Stable Oil-in-Water Pickering Nanoemulsions

Sterically stabilized diblock copolymer nanoparticles with an intensity-average diameter of 25 nm are prepared in the form of a concentrated aqueous dispersion using polymerization-induced self-assembly (PISA). The addition of n-dodecane followed by high-shear homogenization produces n-dodecane-in-water Pickering macroemulsions of 22-46 μm diameter. If the nanoparticles are present in sufficient excess, then subsequent processing using a high-pressure microfluidizer leads to the formation of Pickering nanoemulsions with a mean oil droplet diameter below 200 nm. The size of these Pickering nanoemulsions can be tuned by systematically varying the nanoparticle concentration, applied pressure, number of passes, and oil volume fraction. High-internal-phase emulsions can also be achieved by increasing the n-dodecane volume fraction up to 0.80. TEM studies of (dried) n-dodecane droplets confirm the presence of intact nanoparticles and suggest a relatively high surface coverage, which is consistent with model packing calculations based on radius ratios. Such Pickering nanoemulsions proved to be surprisingly stable with respect to Ostwald ripening, with no significant change in the mean DLS droplet diameter after storage for approximately 4 months at 20 °C.

On the Negative Surface Tension of Solutions and on Spontaneous Emulsification

The condition of negative surface tension of a binary regular solution is discussed in this paper using the recently reconfirmed Butler equation (Langmuir 2015, 31, 5796-5804). It is shown that the surface tension becomes negative only for solutions with strong repulsion between the components. This repulsion for negative surface tension should be so strong that this phenomenon appears only within a miscibility gap, that is, in a two-phase region of macroscopic liquid solutions. Thus, for a macroscopic solution, the negative surface tension is possible only in a nonequilibrium state. However, for a nano-solution, negative surface tension is also possible in equilibrium state. It is also shown that nano- and microemulsions can be thermodynamically stable against both coalescence and phase separation. Further, the thermodynamic theory of emulsion stability is developed for a three-component (A-B-C) system with A-rich droplets dispersed in a C-rich matrix, separated by the segregated B-rich layer (the solubility of B is limited in both A and C while the mutual solubility of A and C is neglected). It is shown that when a critical droplet size is achieved by forced emulsification, it is replaced by spontaneous emulsification and the droplet size is reduced further to its equilibrium value. The existence of maximum temperature of emulsion stability is shown. Using low-energy emulsification below this maximum temperature, spontaneous emulsification can appear, which is enhanced with further decrease of temperature. This finding can be applied to interpret the experimental observations on spontaneous emulsification or for the design of stable micro- and nanoemulsions.

Ethyl Cellulose Nanoparticles at the Alkane-Water Interface and the Making of Pickering Emulsions

Pickering emulsions stabilized by nanoparticles have recently received great attention for their remarkable stability, in part a consequence of irreversible adsorption. In this study, we generate Pickering oil-in-water emulsions stabilized by ethyl cellulose (EC) nanoparticles without the addition of surfactants. Over a range of ionic strength and EC nanoparticle concentrations, a series of dynamic interfacial tension (IFT) measurements complemented by extended DLVO theoretical computations are conducted to quantitatively describe the behavior of EC nanoparticles at the interface of water with different alkanes. Regardless of ionic strength, there is no barrier against the adsorption of EC nanoparticles at the alkane-water interfaces studied and the particles tightly cover these interfaces with near maximal coverage (i.e., 91%). Remarkably, the rate of approach to maximum coverage of the alkane-water interface by EC nanoparticles during the later stages of adsorption is accelerated in the presence of salt at concentrations below the critical coagulation concentration (CCC), unlike the air-water interface. Above the CCC, alkane-water interfaces behave similar to air-water interfaces, showing decay in the adsorption flux which is attributed to an increase in surface blocking originating from the attachment of nanoparticles to nanoparticles already adsorbed at the interface. These findings shed light on particle-particle and particle-interface colloidal interactions at and near fluid-fluid interfaces, thereby improving our ability to use hydrophobic EC nanoparticles as emulsion stabilizers.

Regiospecific Nucleation and Growth of Silane Coupling Agent Droplets onto Colloidal Particles

Nucleation-and-growth processes are used extensively in the synthesis of spherical colloids, and more recently regiospecific nucleation-and-growth processes have been exploited to prepare more complex colloids such as patchy particles. We demonstrate that surface geometry alone can be made to play the dominant role in determining the final particle geometry in such syntheses, meaning that intricate chemical surface patternings are not required. We present a synthesis method for "lollipop"-shaped colloidal heterodimers (patchy particles), combining a recently published nucleation-and-growth technique with our recent findings that particle geometry influences the locus of droplet adsorption onto anisotropic template particles. Specifically, 3-methacryloxypropyl trimethoxysilane (MPTMS) is nucleated and grown onto bullet-shaped and nail-shaped colloids. The shape of the template particle can be chosen such that the MPTMS adsorbs regiospecifically onto the flat ends. In particular, we find that particles with a wider base increase the range of droplet volumes for which the minimum in the free energy of adsorption is located at the flat end of the particle compared with bullet-shaped particles of the same aspect ratio. We put forward an extensive analysis of the synthesis mechanism and experimentally determine the physical properties of the heterodimers, supported by theoretical simulations. Here we numerically optimize, for the first time, the shape of finite-sized droplets as a function of their position on the rod-like silica particle surface. We expect that our findings will give an impulse to complex particle creation by regiospecific nucleation and growth.

Preparation of Colloidal Organosilica Spheres through Spontaneous Emulsification

Colloidal particles of controlled size are promising building blocks for the self-assembly of functional materials. Here, we systematically study a method to synthesize monodisperse, micrometer-sized spheres from 3-(trimethoxysilyl)propyl methacrylate (TPM) in a benchtop experiment. Their ease of preparation, smoothness, and physical properties provide distinct advantages over other widely employed materials such as silica, polystyrene, and poly(methyl methacrylate). We describe that the spontaneous emulsification of TPM droplets in water is caused by base-catalyzed hydrolysis, self-condensation, and the deprotonation of TPM. By studying the time-dependent size evolution, we find that the droplet size increases without any detectable secondary nucleation. Resulting TPM droplets are polymerized to form solid particles. The particle diameter can be controlled in the range of 0.4 to 2.8 μm by adjusting the volume fraction of added monomer and the pH of the solution. Droplets can be grown to diameters of up to 4 μm by adding TPM monomer after the initial emulsification. Additionally, we characterize various physical parameters of the TPM particles, and we describe methods to incorporate several fluorescent dyes.

Particulate Coacervation of Associative Polymer Brushes-Grafted Nanoparticles To Produce Structurally Stable Pickering Emulsions

This study introduces a new type of associative nanoparticle (ANP) that provides controlled chain-to-chain attraction with an associative polymer rheology modifier (APRM) to produce highly stable Pickering emulsions. The ANPs were synthesized by grafting hydrophobically modified hygroscopic zwitterionic poly(2-methacryloyloxyethyl phosphorylcholine-co-stearyl methacrylate) brushes onto 20 nm sized silica NPs via surface-mediated living radical polymerization. The ANP-stabilized Pickering emulsions show significant viscosity enhancement in the presence of the APRM. This indicates that the ANPs act as particulate concentration agents at the interface owing to their hydrophobic association with the APRM in the aqueous phase, which leads to the generation of an ANP-mediated complex colloidal film. Consequently, the described ANP-reinforced Pickering emulsion system exhibits improved resistance to pH and salinity changes. This coacervation approach is advantageous because the complex colloidal layer at the interface provides the emulsion drops with a mechanically robust barrier, thus guaranteeing the improved Pickering emulsion stability against harsh environmental factors.

Partial and Complete Wetting in Ultralow Interfacial Tension Multiphase Blends with Polylactide

The control of phase structuring in multiphase blends of polylactide (PLA) with other polymers is a viable approach to promote its broader implementation. In this article, ternary and quaternary blends of PLA with poly(butylene succinate) (PBS), poly(butylene adipate-co-terephthalate) (PBAT), and poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) are prepared by melt blending. The interfacial tensions between components are measured using three different techniques, and a Fourier transform infrared imaging technique is developed for the purpose of unambiguous phase identification. A tricontinuous complete wetting behavior is observed for the ternary 33PLA/33PBS/33PBAT blend before and after quiescent annealing, which correlates closely with spreading theory analysis. In the quaternary PLA/PBS/PBAT/PHBV blend, a concentration-dependent wetting behavior is found. At 10 vol % PBAT, self-assembled partially wet droplets of PBAT are observed at the interface of PBS and PHBV, and they remain stable after quiescent annealing as predicted by spreading theory. In contrast, at 25 vol % PBAT, a quadruple continuous system is observed after mixing, which only transforms to partially wet PBAT droplets after subsequent annealing. These results clearly indicate the potential of composition control during the mixing of multiphase systems to result in a complete change of spreading behavior.

Hollow Superparamagnetic Microballoons from Lifelike, Self-Directed Pickering Emulsions Based on Patchy Nanoparticles

Herein, the formation of hollow microballoons derived from superparamagnetic iron oxide nanoparticles with silica patches is reported. Depending on the experimental conditions, single- or multishelled superparamagnetic microballoons as well as multivesicular structures were obtained. We show how such structural changes follow a lifelike process that is based on self-directing Pickering emulsions. We further demonstrate that the key toward the formation of such complex architectures is the patchy nature of the nanoparticles. Interestingly, no well-defined ordering of patches on the particles surface is required, unlike what theorists formerly predicted. The resultant hollow microballoons may be turned into hollow carbonaceous magnetic microspheres by simple pyrolysis. This opens the way to additional potential applications for such ultralightweight (density: 0.16 g·cm^-3) materials.

Reversible Partitioning of Nanoparticles at an Oil-Water Interface

The reversible adsorption of nanoparticles (NPs) to oil-water interfaces has been observed experimentally, however, models capable of interpreting and predicting the equilibrium partitioning of particles between bulk media and fluid interfaces are still lacking. Here we characterize the adsorption of 5 nm gold NPs functionalized with ion-pair ligands at the toluene-water interface. Partitioning of the NPs between the bulk aqueous phase and the interface is measured via absorbance spectroscopy for two different aqueous-phase pH values (11.0 and 11.7) and over several orders of magnitude of aqueous phase NP concentration. The surface pressure of the interfacial film in equilibrium with the bulk aqueous phase is measured using the pendant drop method. We determine the range of surface pressure where the adsorption is reversible as well as conditions under which the adsorbed NPs are irreversibly adsorbed at the oil-water interface. We analyze together the adsorption and surface pressure isotherms to obtain the two-dimensional equations of state (EOS) for the NPs in equilibrium with the bulk aqueous phase. The experimental data are then compared to the Frumkin models. We find that the adsorption isotherm and the equation of state show good agreement at low coverage with the Frumkin equations; however, both curves cannot be described with the same parameters. We also show that the low-coverage portion of the EOS can also be described by a wetting model. We hypothesize that deviations from models at higher coverage are likely due to nonequilibrium effects and possible coadsorption.

Nanostructuring Biomaterials with Specific Activities towards Digestive Enzymes for Controlled Gastrointestinal Absorption of Lipophilic Bioactive Molecules

This review describes the development of novel lipid-based biomaterials that modulate fat digestion for the enhanced uptake of encapsulated lipophilic bioactive compounds (e.g. drugs and vitamins). Specific focus is directed towards analysing how key material characteristics affect the biological function of digestive lipases and manipulate lipolytic digestion. The mechanism of lipase action is a complex, interfacial process, whereby hydrolysis can be controlled by the ability for lipase to access and adsorb to the lipid-in-water interface. However, significant conjecture exists within the literature regarding parameters that influence the activities of digestive lipases. Important findings from recent investigations that strategically examined the interplay between the interfacial composition of the lipid microenvironment and lipolysis kinetics in simulated biophysical environments are presented. The correlation between lipolysis and the rate of solubilisation and absorption of lipophilic compounds in the gastrointestinal tract (GIT) is detailed. Greater insights into the mechanism of lipase action have provided a new approach for designing colloidal carriers that orally deliver poorly soluble compounds, directly impacting the pharmaceutical and food industries.

Self-Assembly of Cubes into 2D Hexagonal and Honeycomb Lattices by Hexapolar Capillary Interactions

Particles adsorbed at a fluid-fluid interface induce capillary deformations that determine their orientations and generate mutual capillary interactions which drive them to assemble into 2D ordered structures. We numerically calculate, by energy minimization, the capillary deformations induced by adsorbed cubes for various Young's contact angles. First, we show that capillarity is crucial not only for quantitative, but also for qualitative predictions of equilibrium configurations of a single cube. For a Young's contact angle close to 90°, we show that a single-adsorbed cube generates a hexapolar interface deformation with three rises and three depressions. Thanks to the threefold symmetry of this hexapole, strongly directional capillary interactions drive the cubes to self-assemble into hexagonal or graphenelike honeycomb lattices. By a simple free-energy model, we predict a density-temperature phase diagram in which both the honeycomb and hexagonal lattice phases are present as stable states.

Stability of LAPONITE®-stabilized high internal phase Pickering emulsions under shear

We investigated LAPONITE®-stabilized emulsions. Confocal microscopy shows that the clay particles are not only located at the interface but also aggregate and form a gel in the continuous phase. Our results suggest that the formation of the emulsions is mostly due to this gel formation, rather than that the clay is an emulsifier.

“House-of-cards” structures in silicone rubber composites for superb anti-collapsing performance at medium high temperature

We have introduced a novel polymer nanocomposite with superb anti-collapsing performance after polymer decomposition.

Intermediate pickering emulsion formation as a means for synthesizing hollow mesoporous silica nanoparticles

Particle and surfactant-stabilized emulsion droplets formed in situ serve as templates for hollow silica nanoparticle growth.

Soft matter food physics--the physics of food and cooking

This review discusses the (soft matter) physics of food. Although food is generally not considered as a typical model system for fundamental (soft matter) physics, a number of basic principles can be found in the interplay between the basic components of foods, water, oil/fat, proteins and carbohydrates. The review starts with the introduction and behavior of food-relevant molecules and discusses food-relevant properties and applications from their fundamental (multiscale) behavior. Typical food aspects from 'hard matter systems', such as chocolates or crystalline fats, to 'soft matter' in emulsions, dough, pasta and meat are covered and can be explained on a molecular basis. An important conclusion is the point that the macroscopic properties and the perception are defined by the molecular interplay on all length and time scales.

A non-equilibrium state diagram for liquid/fluid/particle mixtures

The equilibrium structures of ternary oil/water/surfactant systems are often represented within a triangular composition diagram with various regions of the triangle corresponding to different equilibrium states. We transplant this idea to ternary liquid/fluid/particle systems that are far from equilibrium. Liquid/liquid/particle mixtures or liquid/gas/particle mixtures yield a wide diversity of morphologies including Pickering emulsions, bijels, pendular aggregates, spherical agglomerates, capillary suspensions, liquid marbles, powdered liquids, and particle-stabilized foams. This paper argues that such ternary liquid/fluid/particle mixtures can be unified into a non-equilibrium state diagram. What is common among all these systems is that the morphology results from an interplay between the preferential wettability of the particles, capillarity, and viscous forces encountered during mixing. Therefore all such systems share certain universal features, regardless of the details of the particles or fluids used. These features guide the construction of a non-equilibrium state diagram which takes the form of a triangular prism, where each triangular cross-section of the prism corresponds to a different relative affinity of the particles towards the two fluids. We classify the prism into regions in which the various morphologies appear and also emphasize the major difference between systems in which the particles are fully-wetted by one of the fluids vs. partially-wetted by both fluids. We also discuss how the state diagram may change with mixing intensity or with interparticle attractions.

Coupling Underwater Superoleophobic Membranes with Magnetic Pickering Emulsions for Fouling-Free Separation of Crude Oil/Water Mixtures: An Experimental and Theoretical Study

Oil/water separations have become an area of great interest, as growing oil extraction activities are increasing the generation of oily wastewaters as well as increasing the risk of oil spills. Here, we demonstrate a membrane-based and fouling-free oil/water separation method that couples carbon nanotube-poly(vinyl alcohol) underwater superoleophobic ultrafiltration membranes with magnetic Pickering emulsions. We demonstrate that this process is insensitive to low water temperatures, high ionic strength, or crude oil loading, while allowing operation at high permeate fluxes and producing high quality permeate. Furthermore, we develop a theoretical framework that analyzes the stability of Pickering emulsions under filtration mechanics, relating membrane surface properties and hydrodynamic conditions in the Pickering emulsion cake layer to membrane performance. Finally, we demonstrate the recovery and recyclability of the nanomagnetite used to form the Pickering emulsions through a magnetic separation step, resulting in an environmentally friendly, continuous process for oil/water separation.

Dynamically Tuning Particle Interactions and Assemblies at Soft Interfaces: Reversible Order-Disorder Transitions in 2D Particle Monolayers

Particles trapped at fluid interfaces experience long-range interactions that determine their assembly behavior. Because particle interactions at fluid interfaces tend to be unusually strong, once particles organize themselves into a 2D assembly, it is challenging to induce changes in their microstructure. In this report, a new approach is presented to induce reversible order-disorder transitions (ODTs) in the 2D monolayer of colloidal particles trapped at a soft gel-fluid interface. Particles at the soft interface, consisting of a nonpolar superphase and a weakly gelled subphase, initially form a monolayer with a highly ordered structure. The structure of this monolayer can be dynamically varied by the addition or removal of the oil phase. Upon removing the oil via evaporation, the initially ordered particle monolayer undergoes ODT, driven by capillary attractions. The ordered monolayer can be recovered through disorder-to-order transition by simply adding oil atop the particle-laden soft interface. The possibility to dynamically tune the interparticle interactions using soft interfaces can potentially enable control of the transport and mechanical properties of particle-laden interfaces and provide model systems to study particle-laden soft interfaces that are relevant to biological tissues or organs.

Water-in-Water Emulsions Stabilized by Nanoplates

Ultrathin plate-like colloidal particles are effective candidates for Pickering stabilization of water-in-water emulsions, a stabilization that is complicated by the thickness and ultralow tension of the water-water interface. Plate-like particles have the advantage of blocking much of the interface while simultaneously having a low mass. Additionally, the amount of blocked interface is practically independent of the equilibrium contact angle θ at which the water-water interface contacts the nanoplates. As a result, the adsorption of nanoplates is stronger than for spheres with the same maximal cross section, except if θ = 90°.

Hard and soft colloids at fluid interfaces: Adsorption, interactions, assembly & rheology

Soft microgel particles inherently possess qualities of both polymers as well as particles. We review the similarities and differences between soft microgel particles and stiff colloids at fluid-fluid interfaces. We compare two fundamental aspects of particle-laden interfaces namely the adsorption kinetics and the interactions between adsorbed particles. Although it is well established that the transport of both hard particles and microgels to the interface is driven by diffusion, the analysis of the adsorption kinetics needs reconsideration and a proper equation of state relating the surface pressure to the adsorbed mass should be used. We review the theoretical and experimental investigations into the interactions of particles at the interface. The rheology of the interfacial layers is intimately related to the interactions, and the differences between hard particles and microgels become pronounced. The assembly of particles into the layer is another distinguishing factor that separates hard particles from soft microgel particles. Microgels deform substantially upon adsorption and the stability of a microgel-stabilized emulsion depends on the conformational changes triggered by external stimuli.

Thermodynamically Stable Pickering Emulsion Configured with Carbon-Nanotube-Bridged Nanosheet-Shaped Layered Double Hydroxide for Selective Oxidation of Benzyl Alcohol

A simple strategy to configure a high thermodynamically stable Pickering emulsion with 2D sheet-shaped layered double hydroxide (LDH) coupled carbon nanotube (CNT) nanohybrid (LDH-CNT) is reported. With the benefit of a unique 2D sheet-shaped structure of the LDH, the as-made LDH-CNTs with amphiphilicity as solid emulsifiers have a good capability for assembling and stabilizing at the water-oil interface, and a superior thermostability emulsion is delivered, indicative of an increased catalytic performance for selective oxidation of benzyl alcohol to benzaldehyde. Such a unique and excellent thermodynamic stability characteristic makes high reaction interfacial areas well-kept during the reaction process, yielding high catalytic performance. The present strategy provides a simple method for configuration and design of solid nanoparticle emulsifiers with high thermodynamic stability, which will make such a material be of great potential in many important applications such as catalysis and emulsifiers.

Contact angle and adsorption energies of nanoparticles at the air-liquid interface determined by neutron reflectivity and molecular dynamics

Understanding how nanomaterials interact with interfaces is essential to control their self-assembly as well as their optical, electronic, and catalytic properties. We present here an experimental approach based on neutron reflectivity (NR) that allows the in situ measurement of the contact angles of nanoparticles adsorbed at fluid interfaces. Because our method provides a route to quantify the adsorption and interfacial energies of the nanoparticles in situ, it circumvents problems associated with existing indirect methods, which rely on the transport of the monolayers to substrates for further analysis. We illustrate the method by measuring the contact angle of hydrophilic and hydrophobic gold nanoparticles, coated with perdeuterated octanethiol (d-OT) and with a mixture of d-OT and mercaptohexanol (MHol), respectively. The contact angles were also calculated via atomistic molecular dynamics (MD) computations, showing excellent agreement with the experimental data. Our method opens the route to quantify the adsorption of complex nanoparticle structures adsorbed at fluid interfaces featuring different chemical compositions.

In situ assessment of the contact angles of nanoparticles adsorbed at fluid interfaces by multiple angle of incidence ellipsometry

Here multiple angle of incidence ellipsometry was successfully applied to in situ assess the contact angle and surface coverage of gold nanoparticles as small as 18 nm, coated with stimuli-responsive polymers, at water-oil and water-air interfaces in the presence of NaCl and NaOH, respectively. The interfacial adsorption of the nanoparticles was found to be very slow and took days to reach a fairly low surface coverage. For water-oil interfaces, in situ nanoparticle contact angles agree with the macroscopic equilibrium contact angles of planar gold surfaces with the same polymer coatings, whilst for water-air interfaces, significant differences have been observed.

Timescales of emulsion formation caused by anisotropic particles

Particle stabilized emulsions have received much interest in the recent past, but our understanding of the dynamics of emulsion formation is still limited. For simple spherical particles, the time dependent growth of fluid domains is dominated by the formation of droplets, particle adsorption and coalescence of droplets (Ostwald ripening), which eventually can be almost fully blocked due to the presence of the particles. Ellipsoidal particles are known to be more efficient stabilizers of fluid interfaces than spherical particles and their anisotropic shape and the related additional rotational degrees of freedom have an impact on the dynamics of emulsion formation. In this paper, we investigate this point by means of simple model systems consisting of a single ellipsoidal particle or a particle ensemble at a flat interface as well as a particle ensemble at a spherical interface. By applying combined multicomponent lattice Boltzmann and molecular dynamics simulations we demonstrate that the anisotropic shape of ellipsoidal particles causes two additional timescales to be of relevance in the dynamics of emulsion formation: a relatively short timescale can be attributed to the adsorption of single particles and the involved rotation of particles towards the interface. As soon as the interface is jammed, however, capillary interactions between the particles cause a local reordering on very long timescales leading to a continuous change in the interface configuration and increase of the interfacial area. This effect can be utilized to counteract the thermodynamic instability of particle stabilized emulsions and thus offers the possibility to produce emulsions with exceptional stability.

Aspect-Ratio Effect of Nanorod Compatibilizers in Conducting Polymer Blends

Nanoparticles (NPs) at the interface between two different polymer blends or fluid mixtures can function as compatibilizers, thereby dramatically improving the interfacial properties of the blends or the fluid mixtures. Their compatibilizing ability is strongly dependent on their size, shape, and aspect ratios (ARs), which determines their adsorption energy to the interface as well as their entropic penalty when they are being strongly segregated at the interface. Herein, we investigated the effect of the ARs of nanorod surfactants on the conducting polymer blend of poly(triphenylamine) (PTPA) templated by polystyrene (PS) colloids. The lengths of the polymer-coated CuPt nanorods (CuPt NRs) were 5, 15, and 32 nm with a fixed width of 5 nm, thus producing three different AR values of 1, 3, and 6, respectively. For quantitative analysis, the morphological and electrical behaviors of the polymer blends were investigated in terms of the volume fraction and AR of the NRs. The dramatic change in the morphological and electrical properties of the blend film was observed for all three NR surfactants at the NR volume fraction of approximately 1 vol %. Therefore, NR surfactants with larger ARs had better compatibilizing power for a given number of NRs in the blends. Also, they exhibited a stronger tendency to be aligned parallel to the PS/PTPA interface. Also, we demonstrated the successful use of the NR surfactants in the fabrication of conducting polymer blend film that requires only minimal concentrations of conducting polymers. To the best of our knowledge, this is the first report of an experiment on the AR effect of NR compatibilizers in polymer blends.

Hollow microsphere with mesoporous shell by Pickering emulsion polymerization as a potential colloidal collector for organic contaminants in water

Submicrometer hollow microspheres with mesoporous shells were prepared by a simple one-pot strategy. Colloidal silica particles were used as a particle stabilizer to emulsify the oil phase, which was composed of a polymerizable silicon monomer (TPM) and an inert organic solvent (PEA). The low interfacial tension between colloidal silica particles and TPM helped to form a Pickering emulsion with small droplet sizes. After the polymerization of TPM, the more hydrophobic PEA formed a liquid core, leading to a hollow structure after its removal by evaporation. BET results indicated that the shell of a hollow particle was mesoporous with a specific surface area over 400 m(2)·g(-1). With PEA as the core and silica as the shell, each resultant hollow particle had a hydrophobic cavity and an amphiphilic surface, thus serving as a good colloidal collector for hydrophobic contaminants in water.

Particle shape anisotropy in pickering emulsions: cubes and peanuts

We have investigated the effect of particle shape in Pickering emulsions by employing, for the first time, cubic and peanut-shaped particles. The interfacial packing and orientation of anisotropic microparticles are revealed at the single-particle level by direct microscopy observations. The uniform anisotropic hematite microparticles adsorb irreversibly at the oil-water interface in monolayers and form solid-stabilized o/w emulsions via the process of limited coalescence. Emulsions were stable against further coalescence for at least 1 year. We found that cubes assembled at the interface in monolayers with a packing intermediate between hexagonal and cubic and average packing densities of up to 90%. Local domains displayed densities even higher than theoretically achievable for spheres. Cubes exclusively orient parallel with one of their flat sides at the oil-water interface, whereas peanuts preferentially attach parallel with their long side. Those peanut-shaped microparticles assemble in locally ordered, interfacial particle stacks that may interlock. Indications for long-range capillary interactions were not found, and we hypothesize that this is related to the observed stable orientations of cubes and peanuts that marginalize deformations of the interface.