Fresh-frozen structural allografts in the foot and ankle

Severe maxillary atrophy treatment with Le Fort I, allografts, and implant-supported prosthetic rehabilitation

PURPOSE

Recently, several authors have described that autologous and fresh-frozen bones are effective materials to correct jaw bone defects before endosseous implant positioning. The aim of this study was to report a multistep oral rehabilitation of severe atrophic maxilla by means of Le Fort I osteotomy for maxillary downward and forward repositioning, allografts, implant insertion, and prosthetic loading.

METHODS

Patients with severe maxillary atrophy underwent Le Fort I osteotomy associated to fresh-frozen interpositional bone allografts. At 7 months after reconstructive procedure, 2 biopsies for each patient have been taken, and in the same surgical procedure, endosseous implants were placed. Five months afterward, abutments were connected for the final prosthodontic restauration. Each patient was evaluated at 1-year follow-up after prosthetic loading.

RESULTS

At 1-year follow-up after functional prosthetic loading, no infection of the allografts or implant failure has been reported. Clinical and radiologic follow-up showed no sign of bone resorption in all the osteotomic sites and in the grafted areas. Histological analysis showed evidence of allograft osteointegration and healing.

CONCLUSIONS

Multistep oral rehabilitation of severe atrophic maxilla with Le Fort and interpositional bone allografts represents a reliable surgical technique. According to this clinical, radiologic, and histologic reports, interpositional fresh-frozen bone allograft seems to be a valuable material for grafting jaw as it is cheaper than other materials and is safe, and it avoids donor site, decreasing the morbidity of the treatment

Mechanical Properties and In Vitro Bioactivity of β-Tri Calcium Phosphate, Merwinite Nanocomposites

In this study, nanocomposites based on of β-tri calcium phosphate (β-TCP) and 2.5-10 wt% merwinite nanoparticles were prepared and sintered at 1100-1300°c.The mechanical properties were investigated by measuring compressive strength and fracture toughness. Structural properties were evaluated by XRD, TEM and SEM analysis, and the in vitro bioactivity was studied by soaking the samples in simulated body fluid (SBF). The mechanical strength of the sintered samples wereincreased, by increasing the amount of merwinite phase up to 5 wt%, whereas it decreased when the samples were sintered at 1100 and 1200°c. Nanostructured calcium phosphate layer was formed on the surfaces of the nanocomposites within 1 day immersion in simulated body fluid. Because of appropriate mechanical properties the composite is suggested to be used as substitute for hard tissue.

Reconstructive osteotomy of fibular malunion: review of the literature

The treatment of ankle fractures has a primary goal of restoring the full function of the injured extremity. Malunion of the fibula is the most common and most difficult ankle malunion to reconstruct. The most frequent malunions of the fibula are shortening and malrotation resulting in widening of the ankle mortise and talar instability, which may lead to posttraumatic osteoarthritis. The objective of this article is to review the literature concerning the results of osteotomies for correcting fibular malunions and to formulate recommendations for clinical practice. Based on available literature, corrective osteotomies for fibular malunion have good or excellent results in more than 75% of the patients. Reconstructive fibular osteotomy has been recommended to avoid or postpone sequela of posttraumatic degeneration, an ankle arthrodesis or supramalleolar osteotomy. The development of degenerative changes is not fully predictable; therefore, it is advisable to reconstruct a fibular malunion soon after the diagnosis is made and in presence of a good ankle function. Recommendations were made for future research because of the low level of evidence of available literature on reconstructive osteotomies of fibular malunions.

Technique and pearls in performing the first metatarsal phalangeal joint arthrodesis

When there is a considerable loss of first metatarsal phalangeal joint (MTPJ) motion and/or ankylosis is apparent then a joint preservation procedure may not be feasible. For end-stage degenerative change within the MTPJ, nonreducible joint incongruity, or instability of the first MTPJ, an arthrodesis can provide the most predictable and, arguably, the most definitive correction of the deformity, especially in patients with higher functional demands. This article discusses principles of techniques with an emphasis on the procedure to prepare a successful arthrodesis, and expounds on technical nuances including those associated with fixation devices.

Giant cell tumor of second and third metatarsals and a simplified surgical technique: report of two cases

Giant cell tumor (GCT) is a rare benign tumor that often arises in tendon sheath as well as long bones of the lower extremity in adults, although localization in the metatarsus is rare. In this report, the authors describe the rare case of GCT localized to the third metatarsal GCT in a skeletally mature 17-year-old girl, and also describe the results of distal metatarsal resection with Kirschner wire stabilization for the treatment of this condition.

First metatarsophalangeal arthrodesis for severe bone loss

Severe bone loss of the first metatarsal is a significant problem in revisional surgery of the first metatarsophalangeal joint either after failed hallux valgus surgery or failed primary arthrodesis. A short first ray leads to pathologic biomechanics of the forefoot, which is treated with interpositional bone block arthrodesis. A ball-in-socket preparation performed with cup-in-cone reamers is the preferred method for modeling of the bone block. An autologous iliac crest bone graft reveals good results by bony integration. Bone block arthrodesis represents a feasible treatment for severe bone loss, leading to good clinical results at midterm follow-up.

Surgical correction of midfoot arthritis with and without deformity

The goals of midfoot reconstruction are to create a painless, functional, and plantigrade foot, which are generally accomplished with arthrodesis and realignment as indicated. The latter requires not only the correction of midfoot deformity when present, but also coexisting hindfoot and forefoot deformities. Once the initial decisions have been made regarding the need for realignment and which joints to include in the arthrodesis, the surgical plan needs to account for the approach, arthrodesis preparation, order of fixation, and choice of fixation.

Bone grafting in surgery about the foot and ankle: indications and techniques

Bone grafting is a common procedure in foot and ankle surgery. Historically, autogenous bone graft has most often been harvested from the ipsilateral iliac crest. However, other sites offer similar volumes of cancellous bone and are associated with fewer complications. The ipsilateral proximal tibia, distal tibia, and calcaneus provide adequate amounts of bone graft material for most arthrodesis procedures about the foot and ankle. Emerging techniques have enabled the development of a seemingly unlimited supply of alternative bone graft materials with osteoconductive properties. The osteoprogenitor cells in bone marrow aspirates can be concentrated by use of selective retention systems. These aspirate-matrix composites may be combined with allograft preparations, resulting in a product that promotes osteoconduction, osteoinduction, and osteogenesis with limited morbidity.

Femoral head allograft for tibiotalocalcaneal fusion using a cup and cone reamer technique

End-stage degenerative joint disease of the hindfoot with large structural bone deficits is a complex problem encountered by the foot and ankle surgeon. Surgical treatment of this condition often requires tibiotalocalcaneal fusion with use of structural allograft bone. In this article, we describe a technique in which an acetabular reamer is used to create a concave surface for placement of a convex femoral head allograft. This "cup-and-cone" technique provides a congruent area for placement of the allograft, thereby increasing stability of the graft during preparation and placement of an intramedullary nail, while maximizing bone-to-bone surface contact at the arthrodesis site.

Overview of subtalar arthrodesis techniques: options, pitfalls and solutions

BACKGROUND

Subtalar arthrodesis (SA) is the preferred treatment for painful isolated subtalar disease. Although results are generally favourable, analysis of current operative techniques will help optimizing this treatment. The aim was to give an overview of SA-techniques and their pitfalls. Possible solutions were identified.

MATERIALS AND METHODS

A literature search was performed for papers that presented SA operative techniques. The general technique was divided into phases: surgical approach, cartilage removal, bone graft selection, hindfoot deformity correction and fixation.

RESULTS

The published series were invariably retrospective reviews of small heterogenous groups of different hindfoot pathologies. The weighted outcome rate for SA was 85% (68-100%) performed in 766 feet and for SA requiring correction of malalignment 65% (36-96%) in 1001 feet. Non-union (weighted percentage 12%), malalignment (18%), and screw removal (17%) were the prevailing late complications.

PITFALLS

The following pitfalls were identified: 1) early complications related to the incisions made in open approaches, 2) insufficient cartilage removal, improper bone graft selection and fixation techniques, all possibly leading to non-union, 3) morbidity caused by bone graft harvesting and secondary screw removal, 4) under- or overcorrection of the hindfoot possibly due to improper intraoperative verification and 5) inadequate assessment of bony fusion.

SOLUTIONS

The review provides solutions to possibly overcome some pitfalls: 1) if applicable use an arthroscopic approach in combination with distraction devices and new burrs, 2) if possible use local bone graft or allografts, 3) use two screws for fixation to prevent rotational micromotion, and 4) improve assessment of operative outcome by application of appropriate assessment of bony fusion and alignment.

CONCLUSION

The review provides practical suggestions to optimize SA-techniques.

Distraction arthrodesis of the subtalar joint using allogeneic bone graft: a review of 15 cases

Distraction arthrodesis of the subtalar joint is often used for the correction of neglected calcaneal fractures. Although different techniques have been advocated, there remains some debate as to the optimal type of bone graft for this purpose. This study retrospectively reviewed one surgeon's results for distraction arthrodesis of the talocalcaneal joint for 15 consecutive feet in 15 patients using 12 frozen femoral head and 3 freeze-dried iliac crest allografts. Indications for distraction arthrodesis in this series included neglected calcaneal fracture (n = 10), failed open reduction with internal fixation (n = 3), malunion after ankle fusion (n = 1), and subtalar joint arthritis with deformity (n = 1). The mean patient age was 47.5 (range 29 to 66) years, and the mean duration of follow-up was 20.6 (range 13 to 31) months. Complete union was achieved in 14 (93.33%) feet. Orthobiological agents were used in every case, including 7 (46.67%) platelet-rich plasma, 5 (33.33%) demineralized bone matrix combined with platelet-rich plasma, 2 (13.33%) platelet-rich plasma combined with an implantable electrical bone growth stimulator, and 1 (6.67%) demineralized bone matrix only. One (6.67%) patient developed a nonunion with collapse of the allogeneic graft, requiring revision with autogenous iliac crest bone graft. There were 8 (53.33%) minor complications, including 4 (26.66%) cases with inferior heel irritation, 2 (13.33%) with sural nerve paresthesia, and 2 (13.33%) with wound dehiscence. In conclusion, the use of allograft for subtalar joint distraction arthrodesis results in similar union rates as autogenous iliac crest grafting previously reported in the literature.

A retrospective analysis of anterior calcaneal osteotomy with allogenic bone graft

Anterior calcaneal osteotomy (ACO) with extension bone graft is commonly employed in the treatment of symptomatic supple, hypermobile flatfoot in adolescent as well as adult (>or= 18 years of age) patients. Although autogenous bone graft has been considered the gold standard, allogenic bone is widely used for this procedure because it is readily available, requires no additional procedure for procurement and has incorporation rates similar to autogenous bone graft. There is increasing agreement among surgeons that the union rates with allograft bone are comparable with that observed with autograft bone when used in the ACO. We reviewed the medical records of 51 consecutive patients who had undergone 53 ACO with allogenic bone graft for the repair of flatfoot deformity in an effort to further evaluate outcomes associated with the use of allogenic bone graft. All of the patients had at least 12 months of follow-up. The mean time to graft incorporation was 9.10 +/- 1.54 weeks for adolescents and 9.81 +/- 2.13 weeks for adults (P = .0149), The incidence of graft incorporation (bone union) was 100% and 90% (P = .1391) in the adolescent and adult groups, respectively. Complications included lateral column pain, sinus tarsitis, nonunion, calcaneocuboid capsulitis, complex regional pain syndrome, incisional dehiscence, and sural neuritis; and all of the complications occurred in the adult group. The results support the understanding that ACO with allogenic bone graft is a reasonable alternative to autograft bone graft in the treatment of flexible flatfoot in adolescent and adult patients.

Strategies for managing massive defects of the foot in high-energy combat injuries of the lower extremity

Blast-related lower extremity trauma presents many challenges in its management that are not frequently experienced in high-energy civilian trauma. Because many of the blasts experienced in the current conflicts are ground based, the foot and ankle have sustained considerable severity and extent of injury because of the proximity of the blast. The high functional demands required of active service members create several reconstructive challenges. The authors' experience in the current conflicts has shown a similar trend, with the magnitude of soft tissue injury usually dictating whether or not salvage may be possible. Several reconstructive options for bone defect management are outlined and discussed.

Bone graft substitutes and allografts for reconstruction of the foot and ankle

In reconstructive foot and ankle surgery, the use of bone graft is common. Whether for trauma, acquired or congenital deformities, arthrodeses, joint replacement, bone loss from infection, or bone tumor resection, the foot and ankle surgeon must be knowledgeable about current bone grafting options to make informed decisions. Innovation and technologic advances have produced an impressive and exciting array of options, advancing us closer to mimicking the gold standard: autograft. However, the sheer volume of available products makes it challenging for the foot and ankle surgeon to stay abreast of current bone graft technology. The purpose of this article is to simplify and classify current bone grafting options, discuss advantages and disadvantages, and provide relevant clinical examples.

Present status and future potential of enhancing bone healing using nanotechnology

An overview of the current state of tissue engineering material systems used in bone healing is presented. A variety of fabrication processes have been developed that have resulted in porous implant substrates that can address unresolved clinical problems. The merits of these biomaterial systems are evaluated in the context of the mechanical properties and biomedical performances most suitable for bone healing. An optimal scaffold for bone tissue engineering applications should be biocompatible and act as a 3D template for in vitro and in vivo bone growth; in addition, its degradation products should be non-toxic and easily excreted by the body. To achieve these features, scaffolds must consist of an interconnected porous network of micro- and nanoscale to allow extensive body fluid transport through the pores, which will trigger bone ingrowth, cell migration, tissue ingrowth, and eventually vascularization.

Iontophoresis of antibiotics into segmental allografts

Iontophoresis is a novel technique which may be used to facilitate the movement of antibiotics into the substance of bone using an electrical potential applied externally. We have examined the rate of early infection in allografts following application of this technique in clinical practice. A total of 31 patients undergoing revision arthroplasty or surgery for limb salvage received 34 iontophoresed sequential allografts, of which 26 survived for a minimum of two years. The mean serum antibiotic levels after operation were low (gentamicin 0.37 mg/l (0.2 to 0.5); flucloxacillin 1 mg/l (0 to 1) and the levels in the drains were high (gentamicin 40 mg/l (2.5 to 131); flucloxacillin 17 mg/l (1 to 43). There were no early deep infections. Two late infections were presumed to be haemotogenous; 28 of the 34 allografts were retained. In 12 patients with pre-existing proven infection further infection has not occurred at a mean follow-up of 51 months (24 to 82).

Medial fibula transport with the Ilizarov frame to treat massive tibial bone loss

Massive segmental tibial bone loss from trauma, tumor, or infection is a limb-threatening situation. It is a considerable surgical challenge, especially when associated with extensive skin and soft tissue damage. Amputation was the only solution in the past, but current limb-salvage options include contralateral or ipsilateral microvascularized or free-fibular transfer. However, these methods are not without risks and disadvantages. We report seven patients with massive tibial bone loss treated by gradual medial transport of the ipsilateral fibula using an Ilizarov traction apparatus with olive wires after proximal and distal fibular osteotomies. This method has the advantages of avoiding surgery on the contralateral limb while allowing early weightbearing because of the stability of the Ilizarov frame. Hypertrophy of the transported fibula accompanied by full weightbearing and satisfactory joint motion occurred in all patients. All patients were satisfied with the results, and none thought amputation would have been a better treatment. The minimum followup was 5 years. We think the Ilizarov frame for ipsilateral fibular gradual transport is a reasonable alternative for limb salvage in patients with massive tibial bone loss.

LEVEL OF EVIDENCE

Therapeutic Study, Level IV (case series). See the Guidelines for Authors for a complete description of levels of evidence.

Reconstruction of failed ankle fractures

Ankle fractures are some of the most common injuries that are treated by orthopedic surgeons. Optimal long-term results of ankle fractures require accurate reconstruction, a thorough understanding of the mechanism of injury, and accurate radiographic assessment. Failure to reduce and maintain fractures and dislocations around the ankle properly predisposes to instability and late osteoarthritis. This article focuses on the reconstruction of failed ankle reconstruction that results in malunion or nonunion. The indications for fusion or arthroplasty to treat end-stage degenerative changes are discussed. The treatment of concomitant infection and neuropathic fractures are outlined.