Relationship between shear force and trained sensory panel tenderness ratings of 10 major muscles from Bos indicus and Bos taurus cattle

Evaluation of palatability and muscle composition of novel value-added beef cuts

The aim of this study was to evaluate the muscle profile of novel added-value beef cuts including the caudal tip of the M. infraspinatus (Bonanza Cut; TIP) and M. subscapularis (SUB) and two traditional sirloin steak cuts, M. gluteus medius (top sirloin; GLM) and M. rectus femoris (sirloin tip; REC). Samples were subjected to Warner-Braztler Shear Force (WBSF), sensory, cooking loss, and proximate analysis. The muscle TIP had superior values of subjective tenderness, juiciness, and slight off-flavor intensity when compared to all other muscles. The TIP and SUB were similar in WBSF. Cooking loss and moisture values of raw samples were lowest for TIP. Results suggest that TIP can provide enhanced eating experience for consumers and improved marketability for the meat industry.

Meat quality and composition of three muscles from French cull cows and young bulls

The quality of grilled steaks was assessed by experienced panellists in longissimus thoracis (LT), semitendinosus (St) and triceps brachii (TB) muscles of Aubrac, Charolais, Limousin and Salers breeds raised in two production systems: 15-, 19- and 24-month-old bulls and 4-, 6- and 8-year-old cull cows.

Scores for sensory ‘initial tenderness’, ‘overall tenderness’, ‘juiciness’, ‘residue after mastication’ and ‘flavour intensity’ for all 497 meats were pooled to derive three eating quality classes.

Meats from the bulls and cows and from the four breeds were evenly distributed among the three eating quality classes. The highest quality class, representing one third of all the meats, contained 45% of the LT, 35% of the TB and 21% of the St muscles and one third of the meats from the 8-year-old cull cows. The meats in this class tended to have finer fibres, a greater proportion of slow oxidative fibres, slower post-mortem glycolysis, lower connective tissue and higher fat contents than those in the lower classes.

Lipid content accounted for proportionately 0·56 of the variation in flavour intensity and pH at 3 h post mortem, 0·52 of the variation in tenderness due to muscle and slaughter age.

Considering both young bulls and cull cows together, tenderness was highest in the meats from 15-month-old bulls and low in the meats from the intermediate age groups, and flavour and juiciness was highest in the meats from the oldest animals from each production system.

Effect of growth rate on tenderness development and final tenderness of meat from Friesian calves

The present study was conducted to determine the effect of growth rate of calves on the activity of the calpain system post mortem, post mortem desmin degradation, myofibrillar fragmentation index and meat tenderness of m. longissimus lumborum (LL) and m. supraspinatus (SS). Twenty-four Friesian heifer calves were allocated to two treatment groups: MM and HH. The MM calves were given food to achieve a moderate growth rate (678 g/day from 5 days of age to 90 kg body weight (BW) (period I) and 770 g/day from 90 kg BW to slaughter at 250 kg BW (period II)) and the HH calves were given food to achieve a high growth rate (period I: 895 g/day and period II: 1204 g/day). The myofibril fragmentation index (MFI), desmin degradation and the activity of µ-calpain, m-calpain and calpastatin were measured in LL and SS at slaughter, and 1 and 7 days post mortem. Shear force was measured in LL and SS after 1 and 7 days of ageing and a sensory panel evaluated the eating quality of the loin aged 7 days. MFI (P < 0·01) and tenderness (P < 0·01) were higher and shear force was lower (P < 0·001) in meat from HH calves compared with meat from MM calves. However, growth rate did not affect the activity of µ-calpain, m-calpain or calpastatin or the degradation pattern of desmin at any time post mortem. Besides growth rate and MFI at day 7 post mortem, which both correlated positively with meat tenderness (P < 0·001 and P < 0·01, respectively), fibre type traits and DNA or RNA concentrations were not generally related to final tenderness. Thus, it was concluded that increased growth rate of calves before slaughter increased the ease of fragmentation (MFI) of the meat and improved the tenderness but these findings could not be related to any changes in the activity of the calpain system.

Factors influencing beef eating quality 2. Effects of nutritional regimen and genotype on muscle fibre characteristics

Eighteen purebred steers of three genotypes, Aberdeen Angus (AA), Charolais (CH) and Holstein (HO), were divided within genotype into three groups of six animals and offered one of three different levels of feeding either moderate (M/M) or high (H/H) both for 20 weeks or moderate for the first 10 weeks followed by high for the remaining 10 weeks (M/H). Growth rates during the final 10 weeks of the experimental period differed between dietary regimen (M/M = 0·87; M/H = 1·25; and H/H = 1·02 kg/day; s.e.d. = 0·08;P< 0·001). Over the entire 20 week experimental period animals offered the M/M level of feeding grew more slowly (0·97 kg/day) than those offered the M/H and H/H level of feeding (1·20 kg/day; s.e.d. = 0·06;P< 0·001). Mean growth rates for CH, HO and AA steers were 1·21, 1·13 and 1·03 kg/day (s.e.d. = 0·06;P< 0·05). The animals were all slaughtered at a fixed age of 18 months, according to the Meat and Livestock Commission Blueprint for beef and, 48 h post mortem, samples of m. longissimus lumborum (LL) and m. vastus lateralis (VL) were removed for analyses.

Muscle fibres were classified histochemically, according to their contractile and metabolic properties, and muscle fibre size was measured. Fibre type frequency was calculated and, in LL, the total fibre number of the muscle was estimated. There was little impact of feeding level, or consequentially growth rate, on muscle fibre frequency and size. The effects seen were confined mainly to LL where there were significant differences between the M/M and H/ H groups with respect to fast twitch glycolytic fibres (mean % frequency (M/M = 40·1 and H/H = 44·3; s.e.d. = 1·4;P< 0·01); mean % area (M/M = 51·9 and H/H 56·0; s.e.d. = 1·5;P< 0·05)) and apparent total fibre number (M/ M = 35·0; and H/H = 41·9 ✕ 104; s.e.d. = 1·7;P< 0·05) which were greater in H/H than in M/M groups. However, in both LL and VL the predominant differences were related to genotype; in particular, overall fibre size was smallest in CH, while slow oxidative (SO; type I) fibre area was highest in AA. For LL, analysis across all animals showed a positive relationship between SO area, % area, % frequency and overall acceptability of meat at 14 days as evaluated by a trained sensory panel. No such relationship was observed for VL. The data suggest that in this study manipulation of feeding level has only a small impact on muscle fibre characteristics and that the differences between genotype and muscle type may be more important in determining the variability of overall acceptability than growth rate.

Inter-laboratory assessment by trained panelists from France and the United Kingdom of beef cooked at two different end-point temperatures

Eating quality of the same meat samples from different animal types cooked at two end-point cooking temperatures (55°C and 74°C) was evaluated by trained panels in France and the United Kingdom. Tenderness and juiciness scores were greater at 55°C than at 74°C, irrespective of the animal type and location of the panel. The UK panel, independently of animal type, gave greater scores for beef flavour (+7 to +24%, P<0.001) but lower scores for abnormal flavour (-10 to -17%, P<0.001) at 74°C. Abnormal flavour score by the French panel was higher at 74°C than at 55°C (+26%, P<0.001). Irrespective of the data set, tenderness was correlated with juiciness and beef flavour. Overall, this study found that cooking beef at a lower temperature increased tenderness and juiciness, irrespective of the location of the panel. In contrast, cooking beef at higher temperatures increased beef flavour and decreased abnormal flavour for the UK panelists but increased abnormal flavour for the French panel.

Effect of Aging Time on Physicochemical Meat Quality and Sensory Property of Hanwoo Bull Beef

This study was conducted to investigate the meat quality and sensory properties of 12 major cuts from 10 Hanwoo bulls (25-32 mon of age) after they were aged at 2℃ for 0, 7, 14, and 21 d. Protein content (%) was between 19.17 and 22.50%. Intramuscular fat content ranged from 2.79 to 8.39%. The collagen content of the chuck roll, chuck tender, and short plate muscles was higher (1.97-2.04%) than that of the striploin muscles (1.48%) (p<0.05). CIE lightness (L*) values increased with an increase in aging days for tenderloin, loin, chuck roll, oyster blade, short plate, top sirloin, and eye of round muscles (p<0.05). Most muscles, except the short plate, showed no significant changes in redness CIE (a*) and yellowness (b*) color values during aging. The tenderloin, loin, and striploin showed significantly higher water holding capacity (58.60-62.06%) than that of chuck roll and short plate (53.86-57.07%) muscles (p<0.05). The Warner-Bratzler shear force values of most muscles decreased significantly as the aging period increased (p<0.05), exception the tenderloin. The chuck tender muscles showed the highest cooking loss, whereas tenderloin muscle showed the lowest (p<0.05). The tenderloin muscle had the longest sarcomere length (SL) (3.67-3.86 μm) and the bottom round muscle had the shortest SL (2.21-2.35 μm) (p<0.05). In the sensory evaluation, tenderness and overall-likeness scores of most muscles increased with increase in aging days. The tenderloin and oyster blade showed relatively higher tenderness and overall-likeness values than did the other muscles during the aging period. No significant differences were noted in juiciness and flavor-likeness scores among muscles and aging days.

Estimation of Sensory Pork Loin Tenderness Using Warner-Bratzler Shear Force and Texture Profile Analysis Measurements

This study investigated the degree to which instrumental measurements explain the variation in pork loin tenderness as assessed by the sensory evaluation of trained panelists. Warner-Bratzler shear force (WBS) had a significant relationship with the sensory tenderness variables, such as softness, initial tenderness, chewiness, and rate of breakdown. In a regression analysis, WBS could account variations in these sensory variables, though only to a limited proportion of variation. On the other hand, three parameters from texture profile analysis (TPA)—hardness, gumminess, and chewiness—were significantly correlated with all sensory evaluation variables. In particular, from the result of stepwise regression analysis, TPA hardness alone explained over 15% of variation in all sensory evaluation variables, with the exception of perceptible residue. Based on these results, TPA analysis was found to be better than WBS measurement, with the TPA parameter hardness likely to prove particularly useful, in terms of predicting pork loin tenderness as rated by trained panelists. However, sensory evaluation should be conducted to investigate practical pork tenderness perceived by consumer, because both instrumental measurements could explain only a small portion (less than 20%) of the variability in sensory evaluation.

Beef quality of different portions of the biceps femoris muscle in Bos indicus cattle improved by tumbling with brine

The effect of tumbling with brines on different portions of the biceps femoris muscle was evaluated for the quality of beef from cattle older than 30 mo. Six biceps femoris muscles were divided into portions: origin (OP), insertion 1(IP1), and insertion 2 (IP2). The portions were sliced into steaks and were treated with no tumbling (control), tumbling with brine (BR), and tumbling with brine and hydrolyzed soy protein (BR+HSP). The steaks were vacuum packaged and stored for 1 and 12 d and then analyzed for pH, yield, color, cooking loss, and shear force. The control steaks from the OP had higher (P < 0.05) pH and shear force values and lower (P < 0.05) L* values than the control steaks from IP2. The pH and a* and b* values increased (P < 0.05) and the L* values and cooking loss decreased (P < 0.05) when the steaks were tumbled with BR and BR+HSP. Overall, substantial variation was found for the variables among the different portions of the biceps femoris muscle. Based on the lower lightness (low exudation) and greater yellow and red intensity (less oxidation) of the meat, the tumbling with brines improved the meat quality. However, the hydrolyzed soy protein incorporated into the brine did not increase the effect compared with using the brine alone for most of the variables.

Adaptive traits of indigenous cattle breeds: The Mediterranean Baladi as a case study

Generally taken, breeds of Bos taurus ancestry are considered more productive, in comparison with Bos indicus derived breeds that present enhanced hardiness and disease resistance, low nutritional requirements and higher capability of feed utilization. While breeds of B. taurus have been mostly selected for intensive production systems, indigenous cattle, developed mostly from indicine and African taurines, flourish in extensive habitats. Worldwide demographic and economic processes face animal production with new challenges - the increasing demand for animal food products. Intensification of animal husbandry is thus a desired goal in stricken parts of the world. An introduction of productive traits to indigenous breeds might serve to generate improved biological and economic efficiencies. For this to succeed, the genetic merit of traits like efficiency of feed utilization and product quality should be revealed, encouraging the conservation initiatives of indigenous cattle populations, many of which are already extinct and endangered. Moreover, to overcome potential genetic homogeneity, controlled breeding practices should be undertaken. The Baladi cattle are a native local breed found throughout the Mediterranean basin. Purebred Baladi animals are rapidly vanishing, as more European breeds are being introduced or used for backcrosses leading to improved production. The superiority of Baladi over large-framed cattle, in feedlot and on Mediterranean pasture, with respect to adaptability and efficiency, is highlighted in the current review.

Consumer assessment of beef tenderloin steaks from various USDA quality grades at 3 degrees of doneness

A consumer study was conducted to determine palatability ratings of beef tenderloin steaks from USDA Choice, USDA Select, and USDA Select with marbling scores from Slight 50 to 100 (USDA High Select) cooked to various degrees of doneness. Steaks were randomly assigned to 1 of 3 degree of doneness categories: very-rare, medium-rare, or well-done. Consumers (N = 315) were screened for preference of degree of doneness and fed 4 samples of their preferred doneness (a warm-up and one from each USDA quality grade treatment in a random order). Consumers evaluated steaks on an 8-point verbally anchored hedonic scale for tenderness, juiciness, flavor, and overall like as well as rated steaks as acceptable or unacceptable for all palatability traits. Quality grade had no effect (P > 0.05) on consumer ratings for tenderness, juiciness, flavor, and overall like scores, with all traits averaging above a 7 ("like very much") on the 8-point scale. In addition, no differences (P > 0.05) were found in the percentage of samples rated as acceptable for all palatability traits, with more than 94% of samples rated acceptable for each trait in all quality grades evaluated. Steaks cooked to well-done had lower (P < 0.05) juiciness scores than steaks cooked to very-rare or medium-rare and were rated lower for tenderness (P < 0.05) than steaks cooked to a very-rare degree of doneness. Results indicate consumers were not able to detect differences in tenderness, juiciness, flavor, or overall like among beef tenderloin steaks from USDA Choice and Select quality grades.

Growth performance, and carcass and meat quality traits in progeny of Poll Nellore, Angus and Brahman sires under tropical conditions

This study aimed to characterise progeny of sires representing major families in the Poll Nellore breed. Fourteen Poll Nellore sires, two Angus sires and one Brahman sire were mated by AI to ~400 multiparous Poll Nellore dams. Calves were raised and stocked on pasture in central Brazil until reaching ~18 months of age, then fed a sugarcane bagasse-based diet on an ad libitum basis until reaching market weight and finish (average 23 months). There were 236 Poll Nellore (N), 38 Angus × Poll Nellore (AN) and 31 Brahman × Poll Nellore (BN) calves born in total. The weaning and 423-day weight weights, and growth rates and pre- and post-weaning were greater (P < 0.05) in males than in female calves, and were influenced by breed and by sire within the N animals. The weaning weights were higher (P < 0.05) in AN and BN than in N calves. The 423-day weight weights were greater (P < 0.05) in AN calves, followed by BN, with straightbred N being lightest. Feedlot average daily gain was unaffected (P > 0.05) by sex or by sire within N, but was lowest (P < 0.05) in N cattle, and highest in AN and BN animals, which did not differ (P > 0.05). Heifers reached the end of the study with lower bodyweight (BW) and dressing percentage than steers, resulting in lower carcass weights, smaller longissimus muscle areas (LMA), but greater 12th to 13th rib backfat (BF) and similar marbling score and mean shear force. However, the proportion of carcasses grading Choice or Prime was numerically greater in heifers than in steers (23.6% vs 9.8%). AN cattle reached greater harvest weights than BN, and those were heavier than N cattle (P < 0.001). However, dressing percentages were lowest in AN animals, so that there was no significant difference in carcass weight between AN and BN cattle. AN carcasses also had greater LMA, BF and marbling scores than the N carcasses. The proportion of carcasses grading Choice or Prime was numerically greater in AN cattle than in the BN and N groups (25.9%, 11.8% and 15.9%, respectively). Steaks from AN calves were more tender than N steaks, with the BN steaks being intermediate. There was significant variation among N sires for final BW, dressing percentage, carcass weight, LMA and marbling score, but not for BF or mean shear force. The percentages of carcasses of N cattle grading Choice or Prime ranged from 0% to 61.5%. Three N sires produced progeny with greater than 40% of carcasses grading Choice or above (Berílio OB, Furador OB, and Litoral OB). Likewise, three N sires (Blitz OB, Furador OB and Sossego OB) had progeny with 67%, 62% and 75%, respectively, of steaks classified as tender. This study confirmed that Zebu cattle have inferior carcass and meat quality relative to AN crossbreds under tropical conditions, however there is substantial variation within the N breed for these traits, and several sires have a proportion of their progeny comparable in terms of meat tenderness to those of Angus sires.

Effects of Cooking End-point Temperature and Muscle Part on Sensory 'Hardness' and 'Chewiness' Assessed Using Scales Presented in ISO11036:1994

Texture and ‘tenderness’ in particular, is an important sensory characteristic for consumers’ satisfaction of beef. Objective and detailed sensory measurements of beef texture have been needed for the evaluation and management of beef quality. This study aimed to apply the sensory scales defined in ISO11036:1994 to evaluate the texture of beef. Longissimus and Semitendinosus muscles of three Holstein steers cooked to end-point temperatures of 60°C and 72°C were subjected to sensory analyses by a sensory panel with expertise regarding the ISO11036 scales. For the sensory analysis, standard scales of ‘chewiness’ (9-points) and ‘hardness’ (7-points) were presented to the sensory panel with reference materials defined in ISO11036. As a result, both ‘chewiness’ and ‘hardness’ assessed according to the ISO11036 scales increased by increasing the cooking end-point temperature, and were different between Longissimus and Semitendinosus muscles. The sensory results were in good agreement with instrumental texture measurements. However, both texture ratings in this study were in a narrower range than the full ISO scales. For beef texture, ISO11036 scales for ‘chewiness’ and ‘hardness’ are useful for basic studies, but some alterations are needed for practical evaluation of muscle foods.

A structural approach to understanding the interactions between colour, water-holding capacity and tenderness

The colour, water-holding capacity (WHC) and tenderness of meat are primary determinants of visual and sensory appeal. Although there are many factors which influence these quality traits, the end-results of their influence is often through key changes to the structure of muscle proteins and their spatial arrangement. Water acts as a plasticiser of muscle proteins and water is lost from the myofibrillar lattice structure as a result of protein denaturation and consequent reductions in the muscle fibre volume with increasing cooking temperature. Changes in the myofilament lattice arrangement also impact the light scattering properties and the perceived paleness of the meat. Causes of variation in the quality traits of raw meat do not generally correspond to variations in cooked meat and the differences observed between the raw muscle and cooked or further processed meat are discussed. The review will also identify the gaps in our knowledge and where further investigation would beneficial.

A sensory map of the meat universe. Sensory profile of meat from 15 species

The aim of the study was to investigate if meat from different species could be described and related to each other by sensory analysis. Muscle meat from 15 different species commercially available in Norway was assessed by a 22 sensory attribute profile and analysed by multivariate analysis. The different species were significantly different on attributes that gave adequate descriptions of all species. Sixty-eight percent of the sensory variation was contained in the first component, which was dominated by colour attributes. In a model where colour was removed, odour and flavour were the most important attributes accounting for 66% and texture attributes, which accounted for only 13%.

Color stability and tenderness variations within the gluteus medius from beef top sirloin butts

Beef top sirloin butts (n=48) from USDA quality grade (QG; upper 2/3 US Choice vs. US Select) and yield grade categories (YG; 1 and 2 vs. 4 and 5) were aged 14 days, GM steaks were cut, with 2 steaks removed from the anterior (ANT), middle (MID) and posterior (POST) sections of the GM. One steak from each section was cut into lateral (LAT), central (CENT) and medial (MED) portions, packaged aerobically, and displayed for 7 days, whereas the second steaks were cooked to 71°C for WBSF. Top Choice-steaks were redder and more yellow (P<0.05) than Select steaks during display. Cooking losses were greatest (P<0.05) in the MED, and least (P<0.05) in the CENT, portions of GM steaks. Neither QG nor YG category affected WBSF, but differences within the GM were found for (P<0.05) WBSF. Results of this experiment indicate tenderness and color stability gradients exist within the GM.

Cluster analysis application identifies muscle characteristics of importance for beef tenderness

BACKGROUND

An important controversy in the relationship between beef tenderness and muscle characteristics including biochemical traits exists among meat researchers. The aim of this study is to explain variability in meat tenderness using muscle characteristics and biochemical traits available in the Integrated and Functional Biology of Beef (BIF-Beef) database. The BIF-Beef data warehouse contains characteristic measurements from animal, muscle, carcass, and meat quality derived from numerous experiments. We created three classes for tenderness (high, medium, and low) based on trained taste panel tenderness scores of all meat samples consumed (4,366 observations from 40 different experiments). For each tenderness class, the corresponding means for the mechanical characteristics, muscle fibre type, collagen content, and biochemical traits which may influence tenderness of the muscles were calculated.

RESULTS

Our results indicated that lower shear force values were associated with more tender meat. In addition, muscles in the highest tenderness cluster had the lowest total and insoluble collagen contents, the highest mitochondrial enzyme activity (isocitrate dehydrogenase), the highest proportion of slow oxidative muscle fibres, the lowest proportion of fast-glycolytic muscle fibres, and the lowest average muscle fibre cross-sectional area. Results were confirmed by correlation analyses, and differences between muscle types in terms of biochemical characteristics and tenderness score were evidenced by Principal Component Analysis (PCA). When the cluster analysis was repeated using only muscle samples from m. Longissimus thoracis (LT), the results were similar; only contrasting previous results by maintaining a relatively constant fibre-type composition between all three tenderness classes.

CONCLUSION

Our results show that increased meat tenderness is related to lower shear forces, lower insoluble collagen and total collagen content, lower cross-sectional area of fibres, and an overall fibre type composition displaying more oxidative fibres than glycolytic fibres.

Managing meat tenderness

This paper discusses the management of meat tenderness using a carcass grading scheme which utilizes the concept of total quality management of those factors which impact on beef palatability. The scheme called Meat Standards Australia (MSA) has identified the Critical Control Points (CCPs) from the production, pre-slaughter, processing and value adding sectors of the beef supply chain and quantified their relative importance using large-scale consumer testing. These CCPs have been used to manage beef palatability in two ways. Firstly, CCPs from the pre-slaughter and processing sectors have been used as mandatory criteria for carcasses to be graded. Secondly, other CCPs from the production and processing sectors have been incorporated into a model to predict palatability for individual muscles. The evidence for the importance of CCPs from the production (breed, growth path and HGP implants), pre-slaughter and processing (pH/temperature window, alternative carcass suspension, marbling and ageing) sectors are reviewed and the accuracy of the model to predict palatability for specific muscle×cooking techniques is presented.

Beef production potential of Norwegian Red and Holstein-Friesian bulls slaughtered at two ages

There is a paucity of data on the beef production potential of Norwegian Red (NOR) compared with 'modern' Holstein-Friesian (HF) cattle. The present study used a total of 64 bulls in a 2 × 2 factorial design study encompassing two breeds (HF and NOR) and two slaughter ages (485; E, and 610; L, days). The mean initial age and live weight of the HF bulls were 179 (s.d. 47.1) days and 203 (s.d. 64.0) kg, while the corresponding data for the NOR bulls were 176 (s.d. 39.7) days and 185 (s.d. 63.6) kg, respectively. Bulls were offered a 50 : 50 mixture (dry matter (DM) basis) of grass silage and concentrates. No breed × slaughter group interactions were recorded for any parameters evaluated (P > 0.05). HF bulls had higher (P < 0.001) DM intake and poorer (P < 0.01) efficiency of conversion of food to carcass gain than NOR bulls. HF bulls tended (P = 0.07) to have a higher rate of live-weight gain and were heavier (P < 0.001) at slaughter than NOR bulls, though both carcass weight and rate of carcass gain did not differ between the breeds (P > 0.05). NOR bulls had higher (P < 0.001) dressing proportion and carcass conformation score than HF bulls, while breed of bull had no influence (P > 0.05) on carcass fat classification, depth of subcutaneous fat, marbling score or on the weight of fat in the internal depots. Daily food intakes did not differ (P > 0.05) across the two slaughter age groups, though efficiency of conversion of food to carcass gain was poorer (P < 0.05) in the L compared with E bulls. Rate of live-weight gain was lower (P < 0.01) for L bulls, although rate of carcass gain did not differ (P > 0.05) between the E and L bulls. Increasing age at slaughter increased (P < 0.01 or greater) dressing proportion, carcass fat class, depth of subcutaneous fat, marbling score and internal fat depots, but had no effect (P > 0.05) on the carcass conformation score. Instrumental measures of meat quality indicated that meat from NOR bulls was tougher (P < 0.01) than meat from HF bulls, while delaying slaughter increased (P < 0.001) a* and C*ab, and decreased (P < 0.01) h0, indicating improved redness. It is concluded that NOR bulls have higher food efficiency and produce more highly conformed carcasses than HF bulls, but HF bulls produce more tender meat.

Variation in meat quality characteristics between Sanga (Bos taurus africanus) and Sanga-derived cattle breeds and between Sanga and Brahman (Bos indicus)

Cattle breeds indigenous to Africa (Sanga) compare favourably to Bos indicus breeds with regard to adaptation to harsh environments. This study compared the meat quality of three Sanga breeds (Nguni, Tuli and Drakensberger), a Sanga-related breed (Bonsmara) and a B. indicus breed (Brahman) and supported these results with biochemical and histological measurements on the M. longissimus lumborum. Twelve young grain-fed steers of each breed were slaughtered and carcasses were electrically stimulated. All Sanga (and related) breeds, with the exception of the Tuli, had lower Warner-Bratzler shear force (SF) values at 2 and 21 days post mortem compared with the BR (P < 0.05). Measurements related to the calcium-dependent protease system and myofibrillar fragmentation explained the bulk of the variation among breeds, whereas variation in fibre type, sarcomere length and connective tissue properties gave less convincing support. With the exception of the Tuli, Sanga and Sanga-related breeds produced more tender (according to SF) meat than BR, mainly due to favourable calpain-to-calpastatin ratios. Small differences in colour, drip loss and cooking properties were found among breeds (P < 0.05).

Genetic and management factors affecting beef quality in grazing Hereford steers

Attributes contributing to differences in beef quality of 206 Hereford steers finished on pasture were assessed. Beef quality traits evaluated were: Warner-Bratzler meat tenderness and muscle and fat color at one and seven days after slaughter and trained sensory panel traits (tenderness, juiciness, flavor, and marbling) at seven days. Molecular markers were CAPN1 316 and an SNP in exon 2 on the leptin gene (E2FB). Average daily live weight gain, ultrasound monthly backfat thickness gain and rib-eye area gain were estimated. Molecular markers effects on meat quality traits were analyzed by mixed models. Association of meat quality with post weaning growth traits was analyzed by canonical correlations. Muscle color and marbling were affected by CAPN1 316 and E2FB and Warner-Bratzler meat tenderness by the former. The results confirm that marker assisted selection for tenderness is advisable only when beef aging is a common practice. The most important sources of variation in tenderness and color of meat remained unaccounted for.

Quantifying the aging response and nutrient composition for muscles of the beef round

The objective of this study was to determine the optimal postmortem aging period and nutrient composition for Beef Value Cuts of the round. Forty USDA Select and 40 Premium USDA Choice beef carcasses were selected from a commercial beef packing plant in Colorado over a 12-wk period. The bottom and inside rounds were collected from both sides of each carcass for further fabrication into the following muscles: adductor, gastrocnemius, gracilis, pectineus, and superficial digital flexor. Each pair of muscles was cut into 7 steaks and randomly assigned to 1 of the following aging periods: 2, 4, 6, 10, 14, 21, and 28 d, and placed in refrigerated storage (2°C, never frozen). Upon completion of the designated aging period, steaks were removed from storage, cooked to a peak internal temperature of 72°C, and evaluated using Warner-Bratzler shear force (WBSF). A 2-way interaction was detected (P < 0.05) between individual muscle and postmortem aging period. The WBSF of all muscles except the superficial digital flexor decreased with increased time of postmortem aging. Quality grade did not affect (P > 0.05) WBSF values for the adductor, gastrocnemius, pectineus, and superficial digital flexor muscles. Exponential decay models were used to predict the change in WBSF from 2 to 28 d postmortem (aging response). The adductor, gastrocnemius, Select gracilis, Premium Choice gracilis, and pectineus required 21, 14, 23, 23, and 25 d, respectively, to complete the majority of the aging response. To determine the nutrient composition of the adductor, gastrocnemius, gracilis, pectineus, semimembranosus, and superficial digital flexor, bottom and inside rounds were collected from 10 USDA Select and 10 Premium USDA Choice carcasses and fabricated into the respective muscles, cut into 2.54-cm cubes, frozen (-20°C), and then homogenized. The adductor, gracilis, pectineus, semimembranosus, and superficial digital flexor were analyzed for DM, moisture, CP, and ash percentages. All muscles were evaluated for total lipid, fatty acid, and cholesterol composition. When quality grades were combined, all muscles fell into the extra lean or lean categories specified by USDA guidelines. Results of this study illustrate the potential for Beef Value Cuts of the round to be sold in food service operations and retail stores with marketing emphasis being placed on the exceptional leanness and acceptable tenderness of these cuts.

Estimation of relationships between mineral concentration and fatty acid composition of longissimus muscle and beef palatability traits

The objective of this study was to determine the influence of beef LM nutrient components on beef palatability traits and evaluate the impact of USDA quality grade on beef palatability. Longissimus muscle samples from related Angus cattle (n = 1,737) were obtained and fabricated into steaks for trained sensory panel, Warner-Bratzler shear force (WBSF), lipid oxidation measured by thiobarbituric acid reactive substances (TBARS), fatty acid, and mineral composition analysis. Pearson phenotypic correlations were obtained by the correlation procedure of SAS. Beef palatability data were analyzed by the GLM procedure of SAS with USDA quality grade as the main effect. Specific mineral concentrations did not demonstrate strong correlations with WBSF or sensory traits (r = -0.14 to 0.16). However, minerals appeared to have a stronger relationship with flavor; all minerals evaluated except Ca and Mn were positively correlated (P < 0.05) with beef flavor. Stearic acid (C18:0), C18:2, C20:4, and PUFA were negatively correlated (P < 0.05) with all 3 panelist tenderness traits (r = -0.09 to -0.22) and were positively correlated (P < 0.05) with WBSF (r = 0.09 to 0.15). The MUFA were positively correlated (P < 0.05) with panelist tenderness ratings (r = 0.07 to 0.10) and negatively associated (P < 0.05) with WBSF (r = -0.11). The strongest correlations with juiciness were negative relationships (P < 0.05) with C18:2, C18:3, C20:4, and PUFA (r = -0.08 to -0.20). Correlations with beef flavor were weak, but the strongest was a positive relationship with MUFA (r = 0.13). Quality grade affected (P < 0.05) WBSF, TBARS, and all trained sensory panel traits, except livery/metallic flavor. As quality grade increased, steaks were more tender (P < 0.05), as evidenced by both WBSF and sensory panel tenderness ratings. Prime steaks were rated juiciest (P < 0.05) by panelists, whereas Select and Low Choice were similarly rated below Top Choice for sustained juiciness. Quality grade influenced (P < 0.05) beef flavor, but not in a linear fashion. Although there were significant correlations, these results indicate tenderness, juiciness, and flavor are not strongly influenced by individual nutrient components in beef LM. Furthermore, the positive linear relationships between USDA quality grade and beef palatability traits suggest quality grade is still one of the most valuable tools available to predict beef tenderness.

Constraints on establishing threshold levels for Warner - Bratzler shear-force values based on consumer sensory ratings for seven beef muscles

Steaks (n = 560) from US Department of Agriculture (USDA) Choice and Select, including M. gluteobiceps, M. gluteus medius, M. infraspinatus, M. longissimus lumborum, M. rectus femoris, M. triceps brachii and M. vastus lateralis, were evaluated for palatability characteristics and tenderness acceptability by a central-location consumer panel (n = 205 consumers) and Warner–Bratzler shear (WBS) analysis to determine whether threshold values could be identified for these muscles. There were significant interactions for muscle × USDA quality grade for sensory-panel overall like and WBS values. In general, USDA quality grade affected overall like and WBS values for the M. gluteobiceps and M. rectus femoris, but no real differences due to grade were found for the rest of the muscles studied, except for the WBS values for the M. gluteus medius. Regardless of USDA quality grade, the M. infraspinatus had the lowest (P < 0.05) WBS values and was comparable (P > 0.05) in overall like ratings to the M. longissimus lumborum. Percentage of muscles that would be expected to have a tenderness rating ‘slightly tender’ or higher on the basis of WBS values at the 95% confidence interval ranged from 40% for the M. vastus lateralis to 100% for the M. infraspinatus. There were no clear threshold levels for WBS values that would correspond to certain tenderness like ratings, possibly because of the narrow range of tenderness observed within each muscle. For the muscles studied, how consumers rated them appeared to be independent of the WBS values and may make it difficult to develop WBS thresholds for predicting consumer acceptability of these muscles.