Polymer “Clicking” by CuAAC Reactions

Reduced shrinkage stress via photo-initiated copper(I)-catalyzed cycloaddition polymerizations of azide-alkyne resins

OBJECTIVES

Polymerization shrinkage stress and factors involved in the stress development such as volumetric shrinkage and modulus were investigated in photo-CuAAC (photo-initiated copper(I)-catalyzed azide-alkyne cycloaddition) polymerization and compared with conventional BisGMA-based methacrylate polymerization for their use as alternative dental resins.

METHODS

Tri-functional alkyne and di-functional azide monomers were synthesized for photo-CuAAC polymerization. Conversion kinetics, stress development and polymerization shrinkage were determined with FTIR spectroscopy, tensometery, and with a linometer, respectively, for CuAAC and BisGMA-based monomer mixtures using a camphorquinone/amine visible light photoinitiator system. Thermo-mechanical properties for the cured polymer matrices were characterized by dynamic mechanical analysis and in three-point bending on a universal testing machine. Polymerization kinetics, polymerization shrinkage stress, dynamic volumetric shrinkage, glass transition temperature (T_g), flexural modulus, flexural strength, and flexural toughness were compared between the two different resin systems.

RESULTS

A glassy CuAAC polymer (T_g=62°C) exhibited 15-25% lower flexural modulus of 2.5±0.2GPa and flexural strength of 117±8MPa compared to BisGMA-based polymer (T_g=160°C) but showed considerably higher energy absorption around 7.1MJ×m^-3 without fracture when strained to 11% via three-point bend compared to the flexural toughness of 2.7MJ×m^-3 obtained from BisGMA-based polymer. In contrast to BisGMA-based polymers at 75% functional group conversion, the CuAAC polymerization developed approximately three times lower shrinkage stress with the potential to achieve quantitative conversion under ambient temperature photocuring conditions. Moreover, relatively equivalent dynamic volumetric shrinkage of around 6-7% was observed via both CuAAC and dimethacrylate polymerization, suggesting that the low shrinkage stress of CuAAC polymerization was due to delayed gelation along with slower rate of polymerization and the formation of a more compliant network structure.

SIGNIFICANCE

CuAAC crosslinked networks possessed high toughness and low polymerization shrinkage stress with quantitative conversion, which eliminated obstacles associated with BisGMA-based dental resins including limited conversion, unreacted extractable moieties, brittle failure, and high shrinkage stress.

Dinuclear thiazolylidene copper complex as highly active catalyst for azid-alkyne cycloadditions

A dinuclear N-heterocyclic carbene (NHC) copper complex efficiently catalyzes azide-alkyne cycloaddition (CuAAC) "click" reactions. The ancillary ligand comprises two 4,5-dimethyl-1,3-thiazol-2-ylidene units and an ethylene linker. The three-step preparation of the complex from commercially available starting compounds is more straightforward and cost-efficient than that of the previously described 1,2,4-triazol-5-ylidene derivatives. Kinetic experiments revealed its high catalytic CuAAC activity in organic solvents at room temperature. The activity increases upon addition of acetic acid, particularly for more acidic alkyne substrates. The modular catalyst design renders possible the exchange of N-heterocyclic carbene, linker, sacrificial ligand, and counter ion.

Thermomechanical Formation-Structure-Property Relationships in Photopolymerized Copper-Catalyzed Azide-Alkyne (CuAAC) Networks

Bulk photopolymerization of a library of synthesized multifunctional azides and alkynes was carried out toward developing structure-property relationships for CuAAC-based polymer networks. Multifunctional azides and alkynes were formulated with a copper catalyst and a photoinitiator, cured, and analyzed for their mechanical properties. Material properties such as the glass transition temperatures (T_g) show a strong dependence on monomer structure with T_g values ranging from 41 to 90 °C for the series of CuAAC monomers synthesized in this study. Compared to the triazoles, analogous thioether-based polymer networks exhibit a 45-49 °C lower T_g whereas analogous monomers composed of ethers in place of carbamates exhibit a 40 °C lower T_g. Here, the formation of the triazole moiety during the polymerization represents a critical component in dictating the material properties of the ultimate polymer network where material properties such as the rubbery modulus, cross-link density, and T_g all exhibit strong dependence on polymerization conversion, monomer composition, and structure postgelation.

Cu-Catalyzed Click Reaction in Carbohydrate Chemistry

Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC), popularly known as the "click reaction", serves as the most potent and highly dependable tool for facile construction of simple to complex architectures at the molecular level. Click-knitted threads of two exclusively different molecular entities have created some really interesting structures for more than 15 years with a broad spectrum of applicability, including in the fascinating fields of synthetic chemistry, medicinal science, biochemistry, pharmacology, material science, and catalysis. The unique properties of the carbohydrate moiety and the advantages of highly chemo- and regioselective click chemistry, such as mild reaction conditions, efficient performance with a wide range of solvents, and compatibility with different functionalities, together produce miraculous neoglycoconjugates and neoglycopolymers with various synthetic, biological, and pharmaceutical applications. In this review we highlight the successful advancement of Cu(I)-catalyzed click chemistry in glycoscience and its applications as well as future scope in different streams of applied sciences.

Antifouling coatings based on covalently cross-linked agarose film via thermal azide-alkyne cycloaddition

Coatings based on thin films of agarose-poly(ethylene glycol) (Agr-PEG) cross-linked systems are developed as environmentally-friendly and fouling-resistant marine coatings. The Agr-PEG cross-linked systems were prepared via thermal azide-alkyne cycloaddition (AAC) using azido-functionalized Agr (AgrAz) and activated alkynyl-containing poly(2-propiolamidoethyl methacrylate-co-poly(ethylene glycol)methyl ether methacrylate) P(PEMA-co-PEGMEMA) random copolymers as the precursors. The Agr-PEG cross-linked systems were further deposited onto a SS surface, pre-functionalized with an alkynyl-containing biomimetic anchor, dopamine propiolamide, to form a thin film after thermal treatment. The thin film-coated SS surfaces can effectively reduce the adhesion of marine algae and the settlement of barnacle cyprids. Upon covalent cross-linking, the covalently cross-linked Agr-PEG films coated SS surfaces exhibit good stability in flowing artificial seawater, and enhanced resistance to the settlement of barnacle cyprids, in comparison to that of the surfaces coated with physically cross-linked AgrAz films.

Separation efficiency of free-solution conjugated electrophoresis with drag-tags incorporating a synthetic amino acid

DNA sequencing or separation by conventional capillary electrophoresis with a polymer matrix has some inherent drawbacks, such as the expense of polymer matrix and limitations in sequencing read length. As DNA fragments have a linear charge-to-friction ratio in free solution, DNA fragments cannot be separated by size. However, size-based separation of DNA is possible in free-solution conjugate electrophoresis (FSCE) if a "drag-tag" is attached to DNA fragments because the tag breaks the linear charge-to-friction scaling. Although several previous studies have demonstrated the feasibility of DNA separation by free-solution conjugated electrophoresis, generation of a monodisperse drag-tag and identification of a strong, site-specific conjugation method between a DNA fragment and a drag-tag are challenges that still remain. In this study, we demonstrate an efficient FSCE method by conjugating a biologically synthesized elastin-like polypeptide (ELP) and green fluorescent protein (GFP) to DNA fragments. In addition, to produce strong and site-specific conjugation, a methionine residue in drag-tags is replaced with homopropargylglycine (Hpg), which can be conjugated specifically to a DNA fragment with an azide site.

CuAAC: An Efficient Click Chemistry Reaction on Solid Phase

Click chemistry is an approach that uses efficient and reliable reactions, such as Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC), to bind two molecular building blocks. CuAAC has broad applications in medicinal chemistry and other fields of chemistry. This review describes the general features and applications of CuAAC in solid-phase synthesis (CuAAC-SP), highlighting the suitability of this kind of reaction for peptides, nucleotides, small molecules, supramolecular structures, and polymers, among others. This versatile reaction is expected to become pivotal for meeting future challenges in solid-phase chemistry.

When CuAAC 'Click Chemistry' goes heterogeneous

Within the green chemistry context, heterogeneous catalysis is more and more applied to organic synthesis. The well known ‘click chemistry’ and especially its flagship, the copper-catalyzed azide–alkyne cycloaddition reaction (CuAAC), is now catch up by such heterogenisation process and copper ions or metals have been grafted or deposited on or into various solids, such as (bio)polymers, charcoal, silica, zeolites, POM or MOF.

Well-defined polyethylene-based graft terpolymers by combining nitroxide-mediated radical polymerization, polyhomologation and azide/alkyne “click” chemistry

Novel well-defined polyethylene-based graft terpolymers were synthesized via the “grafting onto” strategy by combining NMP, polyhomologation and CuAAC “click” chemistry.

The emergence of oxime click chemistry and its utility in polymer science

The synthesis of new, highly functional and dynamic polymeric materials has risen dramatically since the introduction of click chemistry in 2001.

Poly(1,2,3-triazolium)s: a new class of functional polymer electrolytes

Poly(1,2,3-triazolium)s are tunable and highly functional ion conducting materials that stretch out the actual boundaries of PILs macromolecular design.

A visualized method for Cu2+ ion detection by self-assembling azide functionalized free graphene oxide using click chemistry

We report a visualized method for the detection of Cu²⁺ ions by self-assembling azide functionalized graphene oxide using click chemistry.

Copper-catalysed azide-alkyne cycloadditions (CuAAC): an update

The reactions of organic azides and alkynes catalysed by copper species represent the prototypical examples of click chemistry. The so-called CuAAC reaction (copper-catalysed azide-alkyne cycloaddition), discovered in 2002, has been expanded since then to become an excellent tool in organic synthesis. In this contribution the recent results described in the literature since 2010 are reviewed, classified according to the nature of the catalyst precursor: copper(I) or copper(II) salts or complexes, metallic or nano-particulated copper and several solid-supported copper systems.

Quarternization of 3-azido-1-propyne oligomers obtained by copper(I)-catalyzed azide-alkyne cycloaddition polymerization

3-Azido-1-propyne oligomer (oligoAP) samples, prepared by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization, were quarternized quantitatively with methyl iodide in sulfolane at 60 °C to obtain soluble oligomers. The conformation of the quarternized oligoAP in dilute DMSO-d 6 solution was examined by pulse-field-gradient spin-echo NMR based on the touched bead model.

Cycloadditions in modern polymer chemistry

Synthetic polymer chemistry has undergone two major developments in the last two decades. About 20 years ago, reversible-deactivation radical polymerization processes started to give access to a wide range of polymeric architectures made from an almost infinite reservoir of functional building blocks. A few years later, the concept of click chemistry revolutionized the way polymer chemists approached synthetic routes. Among the few reactions that could qualify as click, the copper-catalyzed azide-alkyne cycloaddition (CuAAC) initially stood out. Soon, many old and new reactions, including cycloadditions, would further enrich the synthetic macromolecular chemistry toolbox. Whether click or not, cycloadditions are in any case powerful tools for designing polymeric materials in a modular fashion, with a high level of functionality and, sometimes, responsiveness. Here, we wish to describe cycloaddition methodologies that have been reported in the last 10 years in the context of macromolecular engineering, with a focus on those developed in our laboratories. The overarching structure of this Account is based on the three most commonly encountered cycloaddition subclasses in organic and macromolecular chemistry: 1,3-dipolar cycloadditions, (hetero-)Diels-Alder cycloadditions ((H)DAC), and [2+2] cycloadditions. Our goal is to briefly describe the relevant reaction conditions, the advantages and disadvantages, and the realized polymer applications. Furthermore, the orthogonality of most of these reactions is highlighted because it has proven highly beneficial for generating unique, multifunctional polymers in a one-pot reaction. The overview on 1,3-dipolar cycloadditions is mostly centered on the application of CuAAC as the most travelled route, by far. Besides illustrating the capacity of CuAAC to generate complex polymeric architectures, alternative 1,3-dipolar cycloadditions operating without the need for a catalyst are described. In the area of (H)DA cycloadditions, beyond the popular maleimide/furan couple, we present chemistries based on more reactive species, such as cyclopentadienyl or thiocarbonylthio moieties, particularly stressing the reversibility of these systems. In these two greater families, as well as in the last section on [2+2] cycloadditions, we highlight phototriggered chemistries as a powerful tool for spatially and temporally controlled materials synthesis. Clearly, cycloaddition chemistry already has and will continue to transform the field of polymer chemistry in the years to come. Applying this chemistry enables better control over polymer composition, the development of more complicated polymer architectures, the simplification of polymer library production, and the discovery of novel applications for all of these new polymers.

1,2,3-Triazoles from carbonyl azides and alkynes: filling the gap

Electron deficient azides are challenging substrates in CuAAC reactions. Particularly, when N-carbonyl azides are applied the formation of N-carbonyl triazoles has not yet been observed. We report herein the first example of this class of reaction, with a copper-based system that efficiently enables the synthesis of N-carbamoyl 1,2,3-triazoles by [3+2] cycloaddition of N-carbamoyl azides and alkynes.

Cleaning the Click: A Simple Electrochemical Avenue for Copper Removal from Strongly Coordinating Macromolecules

We introduce a novel electrochemical method for the purification of complex water-soluble functional polymers contaminated with copper salts originating from copper-catalyzed azide/alkyne ligation chemistry, for which no standard purification protocol is suitable. A triethylene glycol methyl ether methacrylate (TEGMA) star polymer with 2-ureido-4H-pyrimidone (UPy) end groups was prepared via an activator generated by electron transfer atom transfer radical polymerization (AGET ATRP) and copper-catalyzed azide/alkyne cycloaddition (CuAAc) and selected as a model system for electrolysis of an aqueous polymer solution. We systematically investigate the influence of sample concentration, voltage, and time of electrolysis on the quality of the purification. Atom emission spectroscopy (AES) reveals almost quantitative removal of copper, and size exclusion chromatography (SEC) as well as proton nuclear magnetic resonance spectroscopy (¹H NMR) ensure the full integrity of the polymer under all selected conditions.

Modification of arabinogalactan propargyl ethers by triazolyl functions

Polysaccharide arabinogalactan (AG) has been modified by triazolyl functions via the copper-catalyzed 1,3-dipolar addition of azides to propargyl ethers. A range of new AG triazolo derivatives bearing benzyl, 4-vinylbenzyl, 1-naphthylmethyl, (1-vinylimidazol-2-yl)methyl, (1-ethylimidazol-2-yl)methyl, (1-vinylbenzimidazol-2-yl)methyl, allyl, carboxymethyl (as Na-salt) substituents is prepared by "one-pot" approach from organic azides generated in situ and AG propargyl ethers. The latter (degree of substitution 2.0-2.2) are converted into 1,2,3-triazolo AGs in DMSO/water mixture in the presence of CuSO4·5H2O/sodium ascorbate/Et3N in 82-94% yields and with 60-100% conversion.

Dibenzoyldiethylgermane as a visible light photo-reducing agent for CuAAC click reactions

A highly active, versatile and visible light-responsive system for CuAAC click reaction using the dibenzoyldiethylgermane photoinitiator with Cu(ii) has been developed.

From drug to adhesive: a new application of poly(dihydropyrimidin-2(1H)-one)s via the Biginelli polycondensation

Poly(dihydropyrimidin-2(1H)-one)s can be synthesizedviathe Biginelli polycondensation in a short time. Thein situBiginelli polycondensation could glue two metal sheets together.

Organogold oligomers: exploiting iClick and aurophilic cluster formation to prepare solution stable Au4 repeating units

Cluster formation via multiple gold–gold bonds provides sufficient thermodynamic driving force to overcome entropic penalties to link multiple units and create solution stable organogold oligomers.

Copper malonamide complexes and their use in azide–alkyne cycloaddition reactions

A series of copper(i) malonamide complexes have been synthesised and their catalytic activity explored in 1,3-dipolar cycloaddition reactions: the first time this ligand motif has been reported in a catalytic transformation.

Stimuli-responsive hydrogels prepared by simultaneous “click chemistry” and metal–ligand coordination

A novel strategy to synthesize stimuli-responsive metal-coordinated polymeric gels (MCPGs) via one-pot CuAAC and non-covalent metal coordination chemistry was demonstrated.

Highly efficient synthesis and characterization of multiarm and miktoarm star-long-branched polymers via click chemistry

Two series of 3–12 multiarm star polymers and 4-miktoarm star copolymer of butadiene and styrene, in which the M_n of arm was higher than 20 kg mol⁻¹, were synthesized with high efficiency (from 85.0% to 96.1%) via click chemistry.

The Ugi reaction in polymer chemistry: syntheses, applications and perspectives

The well-known Ugi reaction is becoming a novel, efficient and useful tool to prepare multifunctional polymers.

New acetylacetone-polymer modified nanoparticles as magnetically separable complexing agents

In this paper, we present two methods of synthesis of new bifunctional polymeric nanohybrids, their full characterization and the ability to complex lanthanides ions.

Biologically targeted probes for Zn2+: a diversity oriented modular "click-SNAr-click" approach†Electronic supplementary information (ESI) available: Full experimental details including characterisation of all novel compounds can be found in the ESI. See DOI: 10.1039/c4sc01249f

We describe a one-pot strategy for the high yielding, operationally simple synthesis of fluorescent probes for Zn2+ that bear biological targeting groups and exemplify the utility of our method through the preparation of a small library of sensors. Investigation of the fluorescence behaviour of our library revealed that although all behaved as expected in MeCN, under biologically relevant conditions in HEPES buffer, a plasma membrane targeting sensor displayed a dramatic switch on response to excess Zn2+ as a result of aggregation phenomena. Excitingly, in cellulo studies in mouse pancreatic islets demonstrated that this readily available sensor was indeed localised to the exterior of the plasma membrane and clearly responded to the Zn2+ co-released when the pancreatic beta cells were stimulated to release insulin. Conversely, sensors that target intracellular compartments were unaffected. These results demonstrate that this sensor has the potential to allow the real time study of insulin release from living cells and exemplifies the utility of our simple synthetic approach.

Soft Hybrid Nanoparticles: from Preparation to Biomedical Applications

Hybrid particles are a class of materials that include both organic and inorganic moieties at the same time and possess interesting magnetic, optical and mechanical properties. Extensive research is being carried out to develop soft hybrid nanoparticles utilizing their superparamagnetic, biodegradable and fluorescence properties and to explore their biomedical applications. This chapter discusses the important methods for the development of different types of soft hybrid nanoparticles, including polymer immobilization on preformed particles, adsorption of polymers on colloidal particles, adsorption of polymers via layer-by-layer self-assembly, adsorption of nanoparticles on colloidal particles, chemical grafting of preformed polymers, polymerization from and on to colloidal particles, click chemistry, atom-transfer radical polymerization (ATRP), reversible addition–fragmentation chain-transfer radical (RAFT) polymerization, nitroxide-mediated polymerization (NMP) and conventional seed radical polymerization. With current rapid advances in nanomedicine, colloidally engineered hybrid particles are gaining immense importance in fields such as cancer therapy, gene therapy, disease diagnosis and bioimaging. The applications of soft hybrid nanoparticles with respect to diagnosis are discussed briefly and a comprehensive account of their applications in the capture and extraction of nucleic acids, proteins and viruses is presented in this chapter.

Simultaneous electropolymerization and electro-click functionalization for highly versatile surface platforms

Simple preparation methods of chemically versatile and highly functionalizable surfaces remain rare and present a challenging research objective. Here, we demonstrate a simultaneous electropolymerization and electro-click functionalization process (SEEC) for one-pot self-construction of aniline- and naphthalene-based functional polymer films where both polymerization and click functionalization are triggered by applying electrochemical stimuli. Cyclic voltammetry (CV) can be applied for the simultaneous oxidation of 4-azidoaniline and the reduction of Cu(II) ions, resulting in polymerization of the former, and the Cu(I)-catalyzed alkyne/azide cycloaddition ("click" chemistry). Properties of the films obtained can be tuned by varying their morphology, their chemically "clicked" content, or by postconstruction functionalization. To demonstrate this, the CV scan rates, component monomers, and "clicked" molecules were varied. Covalent postconstruction immobilization of horseradish peroxidase was also performed. Consequently, pseudocapacitance and enzyme activity were affected. SEEC provides surface scientists an easy access to a wide range of functionalization possibilities in several fields including sensors, fuel cells, photovoltaics, and biomaterials.

Synthesis of Highly Reactive Polymer Nitrile N-Oxides for Effective Solvent-Free Grafting

A one-pot synthesis of polymer nitrile N-oxides was achieved via the Michael addition of living polymer anions derived from vinyl monomers to commercially available trans-β-nitrostyrene and subsequent dehydration with concd H₂SO₄. The polymer nitrile N-oxides are effective as grafting agents in catalyst- and solvent-free 1,3-dipolar cycloadditions to unsaturated-bond-containing polymers with high conversion and exhibit higher reactivity compared to that of nitrile N-oxides prepared from 1,1-diphenylnitroethene. Application to the preparation of a functional glass surface was demonstrated using PtBMA nitrile N-oxide as a grafting agent.