Biosurfactant: A new frontier for greener technology and environmental sustainability

New benzo(a)pyrene-degrading strains of the Burkholderia cepacia complex prospected from activated sludge in a petrochemical wastewater treatment plant

The prospection of bacteria that are resistant to polyaromatic hydrocarbons (PAH) of activated sludge from a Petrochemical Wastewater Treatment Plant (WWTP) allows investigating potential biodegraders of PAH. For this purpose, sludge samples were cultured with benzo(a)pyrene and/or naphthalene as carbon sources. The recovered isolates were characterized by biochemical methods and identified based on the analysis of the sequence of three genes: 16S, recA and gyrB. The isolated strains were shown to be capable of producing surfactants, which are important for compound degradation. The ability to reduce benzo(a)pyrene in vitro was tested by gas chromatography. After 20 days of experiment, the consortium that was enriched with 1 mg/L of benzo(a)pyrene was able to reduce 30% of the compound when compared to a control without bacteria. The four isolated strains that significantly reduced benzo(a)pyrene belong to the Burkholderia cepacia complex and were identified within the consortium as the species B. cenocepacia IIIa, B. vietnamiensis, B. cepacia, and B. multivorans. This finding demonstrates the biotechnological potential of the B. cepacia complex strains for use in wastewater treatment and bioremediation. Previous studies on hydrocarbon-degrading strains focused mainly on contaminated soil or marine areas. In this work, the strains were prospected from activated sludge in a WWTP and showed the potential of indigenous samples to be used in both improving treatment systems and bioremediation of areas contaminated with petrochemical waste.

Contributions of Glycolipid Biosurfactants and Glycolipid-Modified Materials to Antimicrobial Strategy: A Review

Glycolipid biosurfactants are natural amphiphiles and have gained particular interest recently in their biodegradability, diversity, and bioactivity. Microbial infection has caused severe morbidity and mortality and threatened public health security worldwide. Glycolipids have played an important role in combating many diseases as therapeutic agents depending on the self-assembly property, the anticancer and anti-inflammatory properties, and the antimicrobial properties, including antibacterial, antifungal, and antiviral effects. Besides, their role has been highlighted as scavengers in impeding the biofilm formation and rupturing mature biofilm, indicating their utility as suitable anti-adhesive coating agents for medical insertional materials leading to a reduction in vast hospital infections. Notably, glycolipids have been widely applied to the synthesis of novel antimicrobial materials due to their excellent amphipathicity, such as nanoparticles and liposomes. Accordingly, this review will provide various antimicrobial applications of glycolipids as functional ingredients in medical therapy.

Development and Genetic Engineering of Hyper-Producing Microbial Strains for Improved Synthesis of Biosurfactants

Current research energies are fixated on the synthesis of environmentally friendly and non-hazardous products, which include finding and recognizing biosurfactants that can substitute synthetic surfactants. Microbial biosurfactants are surface-active compounds synthesized intracellularly or extracellularly. To use biosurfactants in various industries, it is essential to understand scientific engagements that demonstrate its potentials as real advancement in the 21st century. Other than applying a substantial effect on the world economic market, engineered hyper-producing microbial strains in combination with optimized cultivation parameters have made it probable for many industrial companies to receive the profits of 'green' biosurfactant innovation. There needs to be an emphasis on the worldwide state of biosurfactant synthesis, expression of biosurfactant genes in expressive host systems, the recent developments, and prospects in this line of research. Thus, molecular dynamics with respect to genetic engineering of biosynthetic genes are proposed as new biotechnological tools for development, improved synthesis, and applications of biosurfactants. For example, mutant and hyper-producing recombinants have been designed efficaciously to advance the nature, quantity, and quality of biosurfactants. The fastidious and deliberate investigation will prompt a comprehension of the molecular dynamics and phenomena in new microorganisms. Throughout the decade, valuable data on the molecular genetics of biosurfactant have been produced, and this solid foundation would encourage application-oriented yields of the biosurfactant production industry and expand its utilization in diverse fields. Therefore, the conversations among different interdisciplinary experts from various scientific interests such as microbiology, biochemistry, molecular biology, and genetics are indispensable and significant to accomplish these objectives.

Biosurfactant inducers for enhanced production of surfactin and rhamnolipids: an overview

Biosurfactants can be widely used in industries as pharmaceutical agents, for microbial enhanced oil recovery, crop biostimulation, among others. Surfactin and rhamnolipids are well-known biosurfactants. These compounds have several advantages over chemical surfactants, however they are not economically competitive, since their production cost is up to 12 times higher than chemical surfactants. In this sense, an interesting approach is to replace synthetic culture medium, which represents ≈ 30% of the production cost by agro-industrial wastes. In addition, biosurfactant productivity can be easily enhanced by inductor supplementation into culture medium that triggers biosurfactant metabolism. Biosurfactant inducers are mainly a pool of hydrophobic molecules (e.g. olive oil-saturated and unsaturated fatty acids, proteins and vitamins). Nevertheless, there is little information on inducer effects of specific molecules (e.g. oleic acid). In general, hydrophobic inducers lead to higher fatty acid chain lengths (biosurfactant chemical structure). Therefore, the aim of this review was to critically discuss the current state of the art and future trends on biosurfactant production, in particular biosurfactant inducers. Taking into account the last 10 years, there is a clear lack of information on correlation between "inducers" or "hydrophobic inducers" AND "biosurfactants", since only 13 documents were found (Scopus database). Thus, it is essential to deeply investigate all inducer effects on biosurfactant production, mainly yield and chemical structure.

Biosurfactant production from newly isolated Rhodotorula sp.YBR and its great potential in enhanced removal of hydrocarbons from contaminated soils

One of the very promising methods in the field of bioremediation of hydrocarbons is the application of biosurfactant- producing microorganisms based on the use of wastewater as renewable substrates of culture media, contributing to the reduction of costs. With this aim, the production, characterization and properties of the yeast strain YBR producing a biosurfactant newly isolated from an oilfield in Algeria, using wastewater from olive oil mills (OOMW) as a substrate for a low-cost and effective production, have been investigated. Screening of biosurfactant production was carried out with different tests, including emulsification index test (E24), drop collapse test, oil spreading technique and measurement of surface tension (ST). The isolated yeast strain was found to be a potent biosurfactant producer with E24 = 69% and a significant reduction in ST from 72 to 35 mN m^-1. The study of the cultural, biochemical, physiological and genetic characteristics of the isolate allowed us to identify it as Rhodotorula sp. strain YBR. Fermentation was carried out in a 2.5 L Minifors Bioreactor using crude OOMW as culture medium, the E₂₄ value reached 90% and a reduction of 72 to 35 mN m^-1 in ST. A biosurfactant yield = 10.08 ± 0.38 g L^-1 was recorded. The characterization by semi-purification and thin layer chromatography (TLC) of the crude extract of biosurfactant showed the presence of peptides, carbohydrates and lipids in its structure. The crude biosurfactant exhibited interesting properties such as: low critical micellar concentration (CMC), significant reduction in ST and strong emulsifying activity. In addition, it has shown stability over a wide range of pH (2-12), temperature (4-100 °C) and salinity (1-10%). More interestingly, the produced biosurfactant has proven to be of great potential application in the remobilization of hydrocarbons from polluted soil with a removal rate of greater than 95%.

Biosurfactants: The green generation of speciality chemicals and potential production using Solid-State fermentation (SSF) technology

Surfactants are multipurpose products found in most sectors of contemporary industry. Their large-scale manufacturing has been mainly carried out using traditional chemical processes. Some of the chemical species involved in their production are considered hazardous and some industrial processes employing them categorised as "having potential negative impact on the environment". Biological surfactants have therefore been generally accepted worldwide as suitable sustainable greener alternatives. Biosurfactants exhibit the same functionalities of synthetic analogues while having the ability to synergize with other molecules improving performances; this strengthens the possibility of reaching different markets via innovative formulations. Recently, their use was suggested to help combat Covid-19. In this review, an analysis of recent bibliography is presented with descriptions, statistics, classifications, applications, advantages, and challenges; evincing the reasons why biosurfactants can be considered as the chemical specialities of the future. Finally, the uses of the solid-state fermentation as a production technology for biosurfactants is presented.

Polycyclic Aromatic Hydrocarbons: Sources, Toxicity, and Remediation Approaches

Polycyclic aromatic hydrocarbons (PAHs) are widespread across the globe mainly due to long-term anthropogenic sources of pollution. The inherent properties of PAHs such as heterocyclic aromatic ring structures, hydrophobicity, and thermostability have made them recalcitrant and highly persistent in the environment. PAH pollutants have been determined to be highly toxic, mutagenic, carcinogenic, teratogenic, and immunotoxicogenic to various life forms. Therefore, this review discusses the primary sources of PAH emissions, exposure routes, and toxic effects on humans, in particular. This review briefly summarizes the physical and chemical PAH remediation approaches such as membrane filtration, soil washing, adsorption, electrokinetic, thermal, oxidation, and photocatalytic treatments. This review provides a detailed systematic compilation of the eco-friendly biological treatment solutions for remediation of PAHs such as microbial remediation approaches using bacteria, archaea, fungi, algae, and co-cultures. In situ and ex situ biological treatments such as land farming, biostimulation, bioaugmentation, phytoremediation, bioreactor, and vermiremediation approaches are discussed in detail, and a summary of the factors affecting and limiting PAH bioremediation is also discussed. An overview of emerging technologies employing multi-process combinatorial treatment approaches is given, and newer concepts on generation of value-added by-products during PAH remediation are highlighted in this review.

Enhanced treatment of the oil-contaminated soil using biosurfactant-assisted washing operation combined with H2O2-stimulated biotreatment of the effluent

A real crude oil-contaminated soil was treated using a two-step method: biosurfactant-assisted soil washing and the biostimulated biotreating of the effluent. The mixture of surfactin and rhamnolipid could enhance the TPH removal from an oil-contaminated soil (32 g/kg) in the soil washing operation. 86% of TPH was removed from the oil-contaminated soil in the soil washing operation under the mixed biosurfactant (surfactin + rhamnolipid) of 0.6 g/L, the soil/water ratio of 20 w/v%, the temperature of 30 °C, and the washing time of 24 h, leaving an effluent containing 5028 mg/L TPH. The effluent was efficiently biotreated in the bioprocess with 5 g/L acclimate biomass daily stimulated with 0.1 mM H₂O₂, and the concentrtion of TPH decreased to 26 mg/L within 17 d corresponding a TPH biodegradation over 99%. The biostimulation with H₂O₂ caused the production of a high amount of peroxidase that could accelerate the biodegradation of TPH. Accordingly, the findings suggest that the biosurfactant-assisted washing operation combined with the H₂O₂-stimulated biodegradation process could be an enhanced green method for efficient treatment of the heavy oil-contaminated soils.

Effects of homemade biosurfactant from Bacillus methylotrophicus on bioremediation efficiency of a clay soil contaminated with diesel oil

Despite constant progress in the understanding of the mechanisms related to the effects of biosurfactants in the bioremediation processes of oily residues, the possibility of antagonist effects on microbial growth and the production in situ of these compounds must be elucidated. The aims of this work were a) to evaluate the effects of the addition of a homemade biosurfactant of Bacillus methylotrophicus on the microbial count in soil in order to determine the possibility of inhibitory effects, and b) to accomplish biostimulation using media prepared with whey and bioaugmentation with B. methylotrophicus, analyzing the effects on the bioremediation of diesel oil and evidencing the in situ production of biosurfactants through effects on surface tension. The homemade bacterial biosurfactant did not present inhibitory effects acting as a biostimulant until 4000 mg biosurfactant/kg of soil. The biostimulation and bioaugmentation presented similar better results (p > 0.05) with the degradation of oil (~60%) than natural attenuation due to the low quantities of biostimulants added. For bioaugmentated and biostimulated soils, a decrease of surface tension between 30 and 60 days was observed, indicating the production of tensoactives in the soil, which was not observed in natural attenuation or a control treatment.

Microemulsion Microstructure(s): A Tutorial Review

Microemulsions are thermodynamically stable, transparent, isotropic single-phase mixtures of two immiscible liquids stabilized by surfactants (and possibly other compounds). The assortment of very different microstructures behind such a univocal macroscopic definition is presented together with the experimental approaches to their determination. This tutorial review includes a necessary overview of the microemulsion phase behavior including the effect of temperature and salinity and of the features of living polymerlike micelles and living networks. Once these key learning points have been acquired, the different theoretical models proposed to rationalize the microemulsion microstructures are reviewed. The focus is on the use of these models as a rationale for the formulation of microemulsions with suitable features. Finally, current achievements and challenges of the use of microemulsions are reviewed.

Statistical and Artificial Neural Network Approaches to Modeling and Optimization of Fermentation Conditions for Production of a Surface/Bioactive Glyco-lipo-peptide

A freshwater alkaliphilic strain of Pseudomonas aeruginosa, grown on waste frying oil-basal medium, produced a surface-active metabolite identified as glycolipopeptide. Bioprocess conditions namely temperature, pH, agitation and duration were comparatively modeled using statistical and artificial neural network (ANN) methods to predict and optimize product yield using the matrix of a central composite rotatable design (CCRD). Response surface methodology (RSM) was the statistical approach while a feed-forward neural network, trained with Levenberg–Marquardt back-propagation algorithm, was the neural network method. Glycolipopeptide model was predicted by a significant (P < 0.001, R² of 0.9923) quadratic function of the RSM with a mean squared error (MSE) of 3.6661. The neural network model, on the other hand, returned an R² value of 0.9964 with an MSE of 1.7844. From all error metrics considered, ANN glycolipopeptide model significantly (P < 0.01) outperformed RSM counterpart in predictive modeling capability. Optimization of factor levels for maximum glycolipopeptide concentration produced bioprocess conditions of 32 °C for temperature, 7.6 for pH, agitation speed of 130 rpm and a fermentation time of 66 h, at a combined desirability function of 0.872. The glycosylated lipid-tailed peptide demonstrated significant anti-bacterial activity (MIC = 8.125 µg/mL) against Proteus vulgaris, dose-dependent anti-biofilm activities against Escherichia coli (83%) and Candida dubliniensis (90%) in 24 h and an equally dose-dependent cytotoxic activity against human breast (MCF-7: IC50 = 65.12 µg/mL) and cervical (HeLa: IC50 = 16.44 µg/mL) cancer cell lines. The glycolipopeptide compound is recommended for further studies and trials for application in human cancer therapy.

Effect of Amino Acids on the Production of Biosurfactant by Pediococcus Acidilactici F70

In this research, the surface activity of bacterial supernatant and cell surface was measured by the method of oil drain ring. The influence of 19 kinds of amino acids (Histidine, Threonine, Valine, Isoleucine, Leucine, Phenylalanine, Arginine, Proline, Methionine, Tryptophan, Alanine, Glycine, Glutamine, Cysteine, Hydroxyproline, Valine, Asparagine, Proline, Glutamine, Serine, and Glutamic acid, Hydroxyproline, Tyrosine) on the production of biosurfactant by Pediococcus acidilactici F70 was studied by single factor experiment, and the main amino acids promoting the production of biosurfactant were selected by Plackett–Burman design. The results showed that the yield of biological surfactant with added amino acid increased, and the yield of Glutamine produced biosurfactant in the supernatant was the highest, which was two times higher than that of the control group (414.00mg/L); the yield of biosurfactant on the cell surface was the highest when Arginine was added, which was three times higher than that of the control group. In the end, 8 of the 19 amino acids (Glycine, Tryptophan, Proline, Methionine, Arginine, Leucine, Serine and Alanine) were selected to promote the production of biosurfactants of Pediococcus acidilactici F70. The results of Plackett–Burman design showed that Alanine, Proline and Leucine had significant effects on the production of biosurfactants.

Heterologous Expression of Sfp-Type Phosphopantetheinyl Transferase is Indispensable in the Biosynthesis of Lipopeptide Biosurfactant

Phosphopantetheinyl transferases are of tremendous enthusiasm inferable from their fundamental parts in activating polyketide, fatty acid, and non-ribosomal peptide synthetase enzymes and additionally an increasing number of biotechnological applications. The present study reports the identification of sfp gene from the Paenibacillus sp. D9, which encompasses 693 bp encoding a 230-amino acid protein with a molecular weight of 25.3 kDa. The amino acid sequence Paenibacillus sp. D9 Sfp revealed more than 90% sequence identity to other Sfp proteins from other Paenibacillus. The sfp gene was cloned and recovered efficiently using affinity chromatography with maximal specific phosphopantetheinyl transferase activity at an optimal pH of 8.0 and temperature of 30 °C. The enzyme also exhibited stability under a wide-ranging pH and temperature. The presence of Zn²⁺, Cu²⁺, and Fe²⁺ ions improved the enzymatic activity, while other metals such as Ni²⁺, Co²⁺, and Mg²⁺ had inhibitory effects. The introduction of EDTA also displayed no inhibition. Kinetic parameters were obtained having values of 4.52 mg/mL, 35.33 U/mg, 3.64 s^-1, and 0.104 mM^-1 s^-1 for K_m, V_max, k_cat, and k_cat/K_m, respectively. The biosurfactant synthesized by the recombinant BioSp was found to be surface active, reducing the surface tension to 33.7 mN/m on the glucose substrate after 5 days of incubation at 37 °C. The recombinant Escherichia coli strain also exhibited an improvement in biosurfactant yield (1.11 g/L) when contrasted with 0.52 g/L from Paenibacillus sp. D9. High esterase activity of 2.55 IU/mL using p-nitrophenyl acetate was observed on the recombinant strain, as the protein connected with the release of the biosurfactant was observed to be an esterase. The characteristics of improved biosurfactant and esterase synthesis by hyper-producing recombinant strain possess numerous values from biotechnology standpoint.

Biotechnological Applications of Paenibacillus sp. D9 Lipopeptide Biosurfactant Produced in Low-cost Substrates

The present study assesses the Paenibacillus sp. D9 lipopeptide biosurfactant synthesis in cheap substrates including functional properties and applicability for varying biotechnological processes. Different experimental setups were made for oil dispersion, heavy metals removals from contaminated environments, and washing performance. The study revealed surface tension activities of 31.7-32.7 mN/m, and maximum biosurfactant yield of more than 8 g/L. Removals of 85.90%, 98.68%, 99.97%, 63.28%, 99.93%, and 94.22% were obtained for Ca, Cu, Fe, Mg, Ni, and Zn, respectively from acid mine effluents. In comparison with chemical surfactants, there was pronounced removal of heavy metals from wastewater, contaminated sands, and vegetable matter, as well as improved oil dispersing activity. A comparative study revealed that biosurfactant was more efficient (> 60%) for removal of tomato sauce and coffee stains than chemical surfactants (< 50%). Thus, lipopeptide biosurfactants are green biomolecules reducing hazards and contaminations within the environment. The future use of this lipopeptide biosurfactant is greatly promising in biotechnology.