Preparation process optimization of pig bone collagen peptide-calcium chelate using response surface methodology and its structural characterization and stability analysis

Chicken foot broth byproduct: A new source for highly effective peptide-calcium chelate

As a means of adding value, chicken foot broth byproduct can be processed to obtain calcium and bioactive peptides from the separated bones and meat residues. In this study, cleaned, dried, and powdered bones yielded 31.4 ± 0.6% calcium content. The meat residues were hydrolyzed to obtain over a hundred distinctive peptides, which were analyzed using LC-MS/MS and the SpirPep web-based tool. The peptides were rich in Glu, Asp, Lys, Gly and Leu, and also exhibited diverse bioactivities, among them primarily inhibition of dipeptidyl peptidase IV and angiotensin-converting enzyme. Calcium chelation assay determined the peptides to bind calcium at 235.7 ± 20.0 mg/g peptide-calcium chelate. Caco-2 cells treated with the chelate at calcium concentrations of 0-10 mM exhibited enhanced absorption relative to CaCl₂. This demonstrates that calcium and chelating peptides generated from the same byproduct can produce peptide-calcium chelate, a potential ingredient in functional foods.

Research progress on applications of calcium derived from marine organisms

Calcium is an important mineral that plays an integral role in human health, especially bone health. Marine biological calcium is an abundant resource that is generally accepted and has a complex active structure. This review evaluates research progress on marine biological calcium with regards to its sources, use of calcium supplements, calcium bioavailability, and novel applications of marine calcium. The potential for future development and the use of products incorporating marine biological calcium in biomedical research and the pharmaceutical, health care, and food industries are also reviewed. The goal of this review is to provide a comprehensive documentation on resource utilization and product development from marine organisms.

Use of Alcalase in the production of bioactive peptides: A review

This review aims to cover the uses of the commercially available protease Alcalase in the production of biologically active peptides since 2010. Immobilization of Alcalase has also been reviewed, as immobilization of the enzyme may improve the final reaction design enabling the use of more drastic conditions and the reuse of the biocatalyst. That way, this review presents the production, via Alcalase hydrolysis of different proteins, of peptides with antioxidant, angiotensin I-converting enzyme inhibitory, metal binding, antidiabetic, anti-inflammatory and antimicrobial activities (among other bioactivities) and peptides that improve the functional, sensory and nutritional properties of foods. Alcalase has proved to be among the most efficient proteases for this goal, using different protein sources, being especially interesting the use of the protein residues from food industry as feedstock, as this also solves nature pollution problems. Very interestingly, the bioactivities of the protein hydrolysates further improved when Alcalase is used in a combined way with other proteases both in a sequential way or in a simultaneous hydrolysis (something that could be related to the concept of combi-enzymes), as the combination of proteases with different selectivities and specificities enable the production of a larger amount of peptides and of a smaller size.

Preparation process optimization, structural characterization and in vitro digestion stability analysis of Antarctic krill (Euphausia superba) peptides-zinc chelate

In the study, a novel kind of peptides-zinc (AKP-Zn) chelate was obtained using the Antarctic krill (Euphausia superba) peptides (AKP) as raw material, the reaction was carried out with the mass ratio of the AKP to ZnSO₄·7H₂O of 1:2 at pH 6.0 and 60 °C for 10 min. The structure and composition of the AKP, including particle size, Zeta potential, molecular weight distribution, amino acid composition, microstructure and surface elemental composition, changed significantly after chelating with zinc. The result of Fourier transform infrared spectroscopy indicated that zinc could be chelated by carboxyl oxygen and amino nitrogen atoms of the AKP. Furthermore, compared with zinc sulfate and zinc gluconate, the AKP-Zn chelate was more stable at various pH conditions and the simulated gastrointestinal digestion experiment. These findings would provide a scientific basis for developing new zinc supplements and the high-value utilization of Antarctic krill protein resource.

Deciphering calcium-binding behaviors of casein phosphopeptides by experimental approaches and molecular simulation

Casein phosphopeptides (CPPs) as premium additives in functional foods can facilitate the transport and adsorption of calcium. The atomic resolution decipherment of calcium-CPP binding behaviors is critical for understanding the calcium bioavailability enhancement potential of CPPs. In the present study, the experimental methods (UV-vis, FTIR and isothermal titration calorimetry) and molecular dynamics simulation were combined to reveal the calcium-binding behaviors of β-casein phosphopeptides (1-25) (P5) with the best capability in carrying calcium ions. We found that it could carry approximately six calcium ions, and the calcium-binding sites were primarily located at the carbonyl group of Glu-2 and the phosphate group of phosphorylated Ser-15, Ser-18, and Ser-19. An interesting finding was that calcium ions could be bound by three coordinated modes, including unidentate, bidentate and tridentate geometries, resulting in the strong binding abilities. The binding process of calcium ions to P5 was spontaneous with the binding free energies of -5.2 kcal mol-1. Hydrophobic interactions were considered to be the major driving force for the calcium ion binding. The present study provides novel molecular insights into the binding process between Ca2+ and calcium-binding peptides.

Continuous Operation on Synthesis and Surface Modification of Rutile Nanoparticles in Designed Microfluidic Reactors

Synthesis and surface modification of rutile nanoparticles (NPs) are two distinct processes. Conventionally, they should be conducted separately. In this work, synthesis and surface modification of rutile NPs are consecutively performed in a designed microfluidic system, thereby avoiding the pilot processes, giving a high controllability and low-energy consumption of the process, and the preparation process of the coated TiO₂ is simplified effectively. Samples synthesized using different strategies are compared, and the results demonstrate that the sample prepared using the microfluidic method shows a smaller particle size (60 nm) and a narrower particle size distribution range than those synthesized using the other two methods. Rutile NPs are most commonly used in terms of suspensions, the stability of the suspensions consisting of the naked and coated samples are assessed in terms of turbidity, agglomeration size, and settlement rate. Response surface methodology is employed to quantify the effects of the factors on the stability of suspensions.

Effect of fortification with calcium from eggshells on bioavailability, quality, and rheological characteristics of traditional Polish bread spread

Hen eggshells are a rich and natural source of calcium and can serve as a biofunctional food ingredient. Enriching the traditional Polish bread spread (sersmażony) with micronized eggshell is an attractive proposition for consumers who require easily available calcium. The present study aimed to evaluate the use of micronized eggshells as a source of bioavailable calcium in bread spread. The study evaluated the effect of selected biocomponents on calcium bioavailability by using an in vitro digestion model. The enrichment of bread spread with eggshell, lysine, vitamin D₃, and vitamin K enhanced all examined physicochemical variables except water activity. Enrichment with eggshells increased calcium levels >2.5-fold compared with the control sample. As an ingredient of bread spread, lysine is an important rheological factor. The bioavailability of calcium was higher in samples with lysine and vitamin K compared with samples that contained eggshell alone.

Fabrication and Characterization of a Microemulsion Stabilized by Integrated Phosvitin and Gallic Acid

The purpose of this work was to conjugate phosvitin (Pv) with gallic acid (GA) to explore a new emulsifier that had both good emulsifying properties and antioxidant activity. The Pv-GA complex was prepared at a GA concentration of 1.5 mg/mL with pH 9.0. The Pv-GA complex obtained was identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and characterized with infrared, ultraviolet, and fluorescence spectra. The emulsifying activity and stability of the Pv-GA complex were slightly improved, and antioxidant activities was significantly enhanced. Furthermore, the Pv-GA complex was used to load conjugated linoleic acid (CLA) for microemulsion preparation. Results showed that the Pv-GA complex could increase the viscosity and lipid antioxidant capacity of Pv-GA/CLA microemulsion. The Pv-GA/CLA microemulsion had remarkable emulsifying activity, emulsifying stability, pH, and thermal stability and poor salt stability.

Tryptophan targeted pulsed electric field treatment for enhanced immune activity in pine nut peptides

To investigate immune activity of pine nut peptides treated by PEF technology and mechanism of targeting immunoactive sitesits, immune regulatory active was evaluated by RAW 264.7 cells model and the structures of pine nut peptides were researched by fluorescence, CD, and 1D/2D NMR spectrum. These consequences showed the ability of macrophages to phagocytosis neutral red and the production of nitric oxide (NO) were improved after PEF treatment. KWFCT treated by PEF treatment with 40 kV/cm obtained the best immunocompetence. The CD spectroscopy showed that PEF could transform the secondary structures of pine nut peptides. The short-range correlation between C_γ H (1.65 ppm) and C_α H (3.35 ppm), and long-range correlation between C_α H (3.37 ppm) and N_α H (8.07 ppm) were enhanced by PEF treatment. PEF treatment of tryptophan in the pine nut peptides enhanced the immunological activity of the pine nut peptides. PRACTICAL APPLICATIONS: Bioactive peptides derived from food proteins have been extensively studied in recent years. However, little research has been done on the immunoactive peptide of pine nut source. PEF treatment is promising for improving certain properties of foods while maintaining the flavor, color, taste, and nutritional value of the food. This research demonstrated that PEF treatment increased the immunological activity of KWFCT and KWFM. The primary structure of KWFCT and KWFM did not change after PEF treatment, but the secondary structure was transformed into each other. A new perspective on the PEF action site is proposed, which is beneficial to the application of PEF technology.

Preparation of sheep bone collagen peptide-calcium chelate using enzymolysis-fermentation methodology and its structural characterization and stability analysis

In this study, enzymatic hydrolysis and Lactobacillus fermentation were used in combination to prepare collagen peptide with high free calcium content, followed by the addition of anhydrous ethanol to obtain peptide-calcium chelate. The optimal conditions for the fermentation of enzymatic hydrolysate (glucose 3%, inoculum size 6%, 24.5 h, 37 °C and pH 6.5) were determined by response surface methodology (RSM), under which a free calcium content of 2212.58 mg/100 g was obtained. The calcium-chelating capacity was 42.57 ± 0.09%. The results of ultraviolet absorption spectrum, Fourier transform infrared (FT-IR) spectra, differential scanning calorimeter (DSC), X-ray diffraction and amino acid analysis indicated that calcium could be chelated through carboxyl oxygen and amino nitrogen atoms of collagen peptides, forming peptide-calcium chelate. The chelate is stable at 30-80 °C of temperatures and during in simulated gastrointestinal digestion, which could promote calcium absorption in human. The test intended to provide a basis for developing a novel calcium supplement and promoting utilization of sheep bone.

Effect on amino acid and mineral content of the loach (Misgurnus anguillicaudatus) by adding Fe (II) chelating hairtail protein hydrolysates (Fe (II)-HPH) to the feed

To study the effect on amino acid and mineral content of the loach meat by adding Fe (II) chelating hairtail protein hydrolysates (Fe (II)-HPH) to the feed. A total of 100 healthy loaches were selected. After 1 week's adaptive feeding, they were randomly divided into five groups and fed with feeds containing of Fe (II)-HPH (0, 0.5, 1, 2, and 4 g/kg). On the 40th day, detection work of general nutrients (moisture, ash, crude protein, and crude fat), mineral elements (Fe, Mn, Cu, Zn, Na, K, and Ca), amino acid and amino acid score (AAS), Chemical Score (CS) and essential amino acid index (EAAI) indexes were done. The results show that crude protein has the highest content while crude fat has the lowest when amount of added Fe (II)-HPH in feed is 2 g/kg. The Fe content is significantly improved while amount of added is 1, 2, 4 g/kg. The Ca content is significantly improved and the Zn content is significantly improved while amount of added was 2 g/kg. Mn contents are significantly lower than control while amount of added is 4 g/kg. Based on analysis of amino acids in each group, the nutritional value of loach meat with 2 g/kg Fe (II)-HPH addition amount is relatively high, total amount of essential amino acids increases significantly, and EAA/TAA and EAA/NEAA improve significantly. In conclusion, adding 2 g/kg Fe (II)-HPH to feed could improve the nutritional values of loach meat.

Study on the Preparation and Conjugation Mechanism of the Phosvitin-Gallic Acid Complex with an Antioxidant and Emulsifying Capability

To develop a novel emulsifier with an antioxidant capacity, a phosvitin-gallic acid (Pv–GA) complex was prepared via a free-radical method. This emulsifier characterizes some key technologies. Changes in the molecular weight of the Pv–GA complex were analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS–PAGE) and the matrix-assisted laser desorption/ionization time of light mass spectrometry (MALDI-TOF-MS). Fourier transform infrared spectroscopy (FTIR) indicated that C=O, C–N and N–H groups were also likely to be involved in the formation of the complex. A redshift was obtained in the fluorescence spectrogram, thereby proving that the covalent combination of Pv and GA was a free radical-forming complex. The results indicated that Pv and GA were successfully conjugated. Meanwhile, the secondary structure of Pv showed significant changes after conjugation with GA. The antioxidant activity and emulsifying properties of the Pv–GA complex were studied. The antioxidant activity of the Pv–GA complex proved to be much higher than that of the Pv, via assays of the scavenging activities of 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radicals and because of their ability to reduce power. The emulsification activity of the Pv–GA complex was also slightly higher than that of Pv. To function with the most demanding antioxidant and emulsification activities, the optimum conjugation condition was Pv (5 mg/mL) conjugated 1.5 mg/mL GA. Furthermore, the mechanism of Pv–GA conjugation was studied. This study indicated that GA could quench the inner fluorescence of Pv, and this quenching was static. There was a strong interaction between GA and Pv, which was not obviously affected by the temperature. Furthermore, several binding sites were close to 1, indicating that there was an independent class of binding sites on Pv for GA at different temperatures. The conjugation reaction was a spontaneous reaction, and the interaction forces of GA and Pv were hydrogen bonds and van der Waals force.

Design and Optimization of Flexible Polypyrrole/Bacterial Cellulose Conductive Nanocomposites Using Response Surface Methodology

Flexible conductive materials have greatly promoted the rapid development of intelligent and wearable textiles. This article reports the design of flexible polypyrrole/bacterial cellulose (PPy/BC) conductive nanocomposites by in situ chemical polymerization. Box-Behnken response surface methodology has been applied to optimize the process. The effects of the pyrrole amount, the molar ratio of HCl to pyrrole and polymerization time on conductivity were investigated. A flexible PPy/BC nanocomposite was obtained with an outstanding electrical conductivity as high as 7.34 S cm⁻¹. Morphological, thermal stability and electrochemical properties of the nanocomposite were also studied. The flexible PPy/BC composite with a core-sheath structure exhibited higher thermal stability than pure cellulose, possessed a high areal capacitance of 1001.26 mF cm⁻² at the discharge current density of 1 mA cm⁻², but its cycling stability could be further improved. The findings of this research demonstrate that the response surface methodology is one of the most effective approaches for optimizing the conditions of synthesis. It also indicates that the PPy/BC composite is a promising material for applications in intelligent and wearable textiles.