Use of high-intensity ultrasound to improve emulsifying properties of chicken myofibrillar protein and enhance the rheological properties and stability of the emulsion

The physicochemical properties and stability of myofibrillar protein oil-in-water emulsions as affected by the structure of sugar

Different sugars (glucose, GL; fructose, FR; hyaluronic acid, HA; cellulose, CE) were added to a myofibrillar protein (MP) emulsion (MP: 1.2 w/v%, sugar: 0.1% w/v) to study the effect of sugar structure on the physicochemical properties and stability of the MP emulsions. The emulsifying properties of MP-HA were significantly (P < 0.05) higher than those of the other groups. The monosaccharide (GL/FR) exerted negligible effects on the emulsifying performance of the MP emulsions. The ζ-potential and particle size implied that HA introduced stronger negative charges, significantly reducing the final particle size (190-396 nm). Rheological examinations indicated that the introduction of polysaccharides considerably increased the viscosity and network entanglement; confocal laser scanning microscopy and creaming index revealed that MP-HA was stable during storage, whereas MP-GL/FR/CE exhibited severe delamination after long-term storage. HA, a heteropolysaccharide, is most suitable for improving MP emulsion quality.

Differentiating the effects of hydrophobic interaction and disulfide bond on the myofibrillar protein emulsion gels at the high temperature and the protein interfacial properties

The study presented the effects of modulating the hydrophobic interaction and disulfide bond on the properties of myofibrillar protein (MP) emulsion gels at high temperature (95 °C) and the differentiation on the contribution of non-covalent (hydrophobic interaction) and covalent intermolecular interactions (disulfide bond) to the properties of interfacial protein films were also determined. The hydrophobic interactions among MP were modulated by the addition of octenyl succinic anhydride (OSA), and the disulfide bonds were modulated by the SH/SS exchange reactions mediated by GSH. The results showed that the MP emulsion gel properties at 95 °C were improved by modulating the hydrophobic interaction or disulfide bonds, and the dynamic interfacial adsorption of MP and dissipation quartz crystal microbalance experiments showed the interfacial adsorption pattens of protein were also changed. In addition, the hydrophobic interactions putted emphasis on improving the gel matrix, whereas the disulfide bonds focused on increasing the stiffness of interfacial protein films.

Mono-frequency ultrasonic-assisted thawing of frozen goose meat: Influence on thawing efficiency, product quality and microstructure

This study aimed to investigate the influences of mono-ultrasound assisted thawing on the thawing efficiency, product quality and conformational characteristics of frozen goose meat. The thawing time, thawing loss, muscle quality, and microstructure of frozen goose meat were studied. The results displayed that ultrasonic-assisted thawing effectively reduced the thawing time by 45.37-57.58% compared with non-sonicated group, and significantly decreased the thawing loss. For the quality properties of goose meat tissue, ultrasound-assisted thawing with single-frequency of 50 kHz indicated a lower protein turbidity; meanwhile, hardness values were also significantly increased, and displayed a higher springiness, gumminess and chewiness of goose meat tissue. The microstructure analysis exhibited that the conformation of goose myofibrillar protein (MP) was modified following ultrasonic-assisted thawing, and became closer and more irregular. Therefore, ultrasound-assisted thawing treatments at 50 kHz mono-frequency (temperature 25℃) have a high potential application value in the thawing research of frozen goose meat, and lay a theoretical foundation for use in the meat process industries.

Emulsifying properties of wheat germ protein: Effect of different ultrasonic treatment

The effect of ultrasonic treatment on emulsifying properties of wheat germ protein (WGP) was studied in this paper. WGP was subjected to low frequency (20 kHz), high intensity ultrasonic treatment at different power (200, 400, 600, 800 W) for 10 min, or different time (2, 4, 6, 8, 10, 15, 20 min) at 400 W. The emulsifying activity index and emulsion stability index of WGP were significantly improved, and the emulsion droplet was smaller and more uniform after ultrasound treatment. Ultrasound increased the adsorbed WGP concentration at the oil-water interface and reduced the interfacial tension, which explained the improved emulsifying properties of WGP. The investigation on molecular properties and protein conformation showed that ultrasound processing increased solubility, but decreased particle size and surface charge of WGP. Ultrasound processing resulted in the unfolding of the protein molecular structure indicated by the increase of surface hydrophobicity and surface free sulfhydryl group levels, and the decrease of intrinsic fluorescence intensity. Correlation analysis showed that the changes in WGP solubility, particle size, and surface hydrophobicity were the main driven factors for the improved emulsifying properties of WGP.

Effects of ultrasonic treatment on the structural and functional properties of cactus (Opuntia ficus-indica) seed protein

With the steady increase in the consumption of ultra-processed foods, there is growing interest in sustainable diets that include more plant protein. However, little information is available regarding the structural and functional properties of cactus (Opuntia ficus-indica) seed protein (CSP), a by-product of the cactus seed food-processing chain. This study aimed to explore the composition and nutritional value of CSP and reveal the effects of ultrasound treatment on protein quality. Protein chemical structure analysis showed that an appropriate intensity of ultrasound treatment (450 W) could significantly increase protein solubility (96.46 ± 2.07%) and surface hydrophobicity (13.76 ± 0.85 μg), decrease the content of T-SH (50.25 ± 0.79 μmol/g) and free-SH (8.60 ± 0.30 μmol/g), and enhance emulsification characteristics. Circular dichroism analysis further confirmed that the ultrasonic treatment increased the α-helix and random coil content. Amino acid analysis also suggested that ultrasound treatment (450 W) increased the hydrophobic amino acid content. To evaluate the impact of changes in the chemical structure, its digestion behavior was studied. The results showed that ultrasound treatment increased the release rate of free amino acids. Furthermore, nutritional analysis showed that the digestive products of CSP by ultrasound treatment can significantly enhance the intestinal permeability, increase the expression of ZO-1, Occludin and Claudin-1, thus repairing LPS induced intestinal barrier disfunction. Hence, CSP is a functional protein with high value, and ultrasound treatment is recommended. These findings provide new insights into the comprehensive utilization of cactus fruits.

Effects of spray drying and freeze drying on the structure and emulsifying properties of yam soluble protein: A study by experiment and molecular dynamics simulation

This study focused on the effects of freeze drying (FD) and sprays drying (SD) on the structure and emulsifying properties of yam soluble protein (YSP). The results showed that the surface hydrophobicity (Ho) value, free sulfhydryl group (SH) content, turns content, denaturation temperature and enthalpy value of spray-dried YSP (SD-YSP) were higher than freeze-dried YSP (FD-YSP), but the apparent hydrodynamic diameter (Dh) value of SD-YSP was smaller. The smaller Dh, higher Ho and free SH led to higher percentage of adsorbed proteins and stronger binding between protein and oil droplet in emulsions. Thus, the emulsifying properties of SD-YSP were better, and the SD-YSP-stabilized emulsion had better dynamical rheological properties. Molecular dynamics (MD) simulations suggested that some intramolecular disulfide bonds and hydrogen bonds of dioscorin were broken, and some helices transformed into turns during the SD process. These structural changes resulted in better thermal stability and emulsification properties of SD-YSP.

High-intensity ultrasound modified the functional properties of Neosalanx taihuensis myofibrillar protein and improved its emulsion stability

This study aimed to investigate the effects of high-intensity ultrasound treatment on the functional properties and emulsion stability of Neosalanx taihuensis myofibrillar protein (MP). The results showed that the carbonyl groups, emulsification properties, intrinsic fluorescence intensity, and surface hydrophobicity of the ultrasound treated MP solution were increased compared to the MP without ultrasound treatment. The results of secondary structure showed that the ultrasound treatment could cause a huge increase of β-sheet and a decline of α-helix of MP, indicating that ultrasound induced molecular unfolding and stretching. Moreover, ultrasound reduced the content of total sulfhydryl and led to a certain degree of MP cross-linking. The microscopic morphology of MP emulsion indicated that the emulsion droplet decreased with the increase of ultrasound power. In addition, ultrasound could also increase the storage modulus of the MP emulsion. The results for the lipid oxidation products indicated that ultrasound significantly improved the oxidative stability of N. taihuensis MP emulsions. This study offers an important reference theoretically for the ultrasound modification of aquatic proteins and the future development of N. taihuensis deep-processed products represented by surimi.

Improving the gel properties of salted egg white/cooked soybean protein isolate composite gels by ultrasound treatment: Study on the gelling properties and structure

In this study, the effects of ultrasound treatment on the texture, physicochemical properties and protein structure of composite gels prepared by salted egg white (SEW) and cooked soybean protein isolate (CSPI) at different ratios were investigated. With the increased SEW addition, the ζ-potential absolute values, soluble protein content, surface hydrophobicity and swelling ratio of composite gels showed overall declining trends (P < 0.05), while the free sulfhydryl (SH) contents and hardness of exhibited overall increasing trends (P < 0.05). Microstructural results revealed that composite gels exhibited denser structure with the increased SEW addition. After ultrasound treatment, the particle size of composite protein solutions significantly decreased (P < 0.05), and the free SH contents of ultrasound-treated composite gels were lower than that of untreated composite gels. Moreover, ultrasound treatment enhanced the hardness of composite gels, and promoted the conversion of free water into non-flowable water. However, when ultrasonic power exceeded 150 W, the hardness of composite gels could not be further enhanced. FTIR results indicated that ultrasound treatment facilitated the composite protein aggregates to form a more stable gel structure. The improvement of ultrasound treatment on the properties of composite gels was mainly by promoting the dissociation of protein aggregates, and the dissociated protein particles further interacted to form denser aggregates through disulfide bond, thus facilitating the crosslinking and reaggregation of protein aggregates to form denser gel structure. Overall, ultrasound treatment is an effective approach to improve the properties of SEW-CSPI composite gels, which can improve the potential utilization of SEW and SPI in food processing.

Properties of Pickering emulsions stabilized by cellulose nanocrystals extracted from litchi peels

The development of Pickering emulsions which are applicable to the food industry still remains challenges due to the limited availability for biocompatible, edible and natural emulsifiers. The purpose of this study was to extract cellulose nanocrystals from litchi peels (LP-CNCs), and evaluate their emulsifying properties. The results showed that the LP-CNCs were needle-like and they possessed high crystallinity (72.34 %) and aspect ratio. When the concentrations of LP-CNCs were >0.7 wt% or the contents of oil were no >0.5, stable Pickering emulsions were obtained. The microstructures of emulsions confirmed that LP-CNCs formed dense interfacial layers on the surface of oil droplets, which functioned as barriers to prevent aggregation and flocculation among droplets. Rheological results showed that the emulsions exhibited typical shear thinning behavior. The elastic of emulsions was dominant, and their gel strength could be enhanced by regulating the contents of emulsifiers or oil. Additionally, the Pickering emulsions stabilized by LP-CNCs showed extremely high pH, ionic strength, and temperature tolerance. This strategy provides an innovative alternative to tackle the dilemma of preparing highly stable Pickering emulsions using natural particles in food products.

Assessment of Soy Protein Acid Hydrolysate-Xanthan Gum Mixtures on the Stability, Disperse and Rheological Properties of Oil-in-Water Emulsions

There is a growing need for natural ingredients that could be utilized for the production of food, pharmaceutical, and cosmetic emulsions. Soy protein acid hydrolysate (SPAH) is a plant-based additive used in the food industry mainly as a flavor enhancer. For the purpose of this work, however, it was mixed with a well-known natural polysaccharide, xanthan gum (XG), to produce stable 30% (w/w) sunflower oil-in-water emulsions using a rotor-stator homogenizer. In order to assess the emulsifying properties of the SPAH and its mixtures with XG, the surface tension properties of their water solutions, particle size, creaming stability, and rheological properties of the emulsions were investigated. Since the emulsions prepared using only SPAH, in various concentrations, were not stable, systems containing 5% of SPAH and 0.1, 0.2, 0.3, 0.4, or 0.5% of XG were then studied. The increase in concentration of the macromolecule led to an increase in creaming stability. The emulsions with 5% SPAH and 0.5% XG were stable for at least 14 days. The increase in XG concentration led to a decrease in d_4,3, while consistency index and non-Newtonian behavior increased. The systems containing SPAH, in the absence of XG, showed shear-thinning flow behavior, which was changed to thixotropic with the addition of XG. Viscoelastic properties of emulsions containing over 0.2% of XG were confirmed by oscillatory rheological tests, demonstrating the dominance of elastic (G') over viscous (G") modulus.

Effects of the use of raw or cooked chickpeas and the sausage cooking time on the quality of a lamb-meat, olive-oil emulsion-type sausage

Reformulation of cooked sausages using high-protein plant-based food such as chickpea as meat extenders and vegetable oils to replace animal fat can be a suitable approach to promote the consumption of smaller portions of meat. The pre-processing of chickpea and the sausage cooking intensity can potentially affect the quality of reformulated sausages. In this study, an emulsion-type sausage made with lamb meat, chickpea and olive oil was prepared in triplicate following three different formulations containing the same targeted levels of protein (8.9%), lipids (21.5%), and starch (2.9%): control sausage (CON; control, without chickpea), and raw (RCP) and cooked chickpea (CCP) sausages (both with 7% chickpea). Sausages were cooked at 85 °C for two heating times (40 min or 80 min) and were analysed for weight loss, emulsion stability, colour, texture, lipid oxidation and volatile composition. Compared to CON sausages, the use of raw chickpea reduced the elasticity and significantly increased lipid oxidation during the sausage-making process resulting in major changes in the volatile composition. The use of previously cooked chickpea, however, resulted in the sausages having greater cooking loss, hardness and chewiness than CON sausages, while there was no difference in lipid oxidation, and differences in volatile compounds were scarce. The reformulation with cooked chickpea could provide a sausage with more similarity to the CON sausage. The extended heating time of 80 min at 85 °C did not significantly affect the quality traits in either CON or reformulated sausages except for a higher cooking loss.

Effects of ultrasound on the oxidation and structures of the myofibrillar protein in the presence or absence of soybean oil

BACKGROUND

Ultrasound is widely used as a novel non-thermal processing technique to improve protein properties. In recent decades, applying ultrasound-assisted emulsification (UAE) to produce protein-stabilized emulsion has attracted people's attention. Instead of applying ultrasound to treat a single protein solution, UAE treatment refers to the use of sonication to a mixture of protein and oil. The purpose of this study was to compare the different effects of ultrasound treatment on the properties of the myofibrillar protein (MP) in the presence or absence of soybean oil. A suitable sonication power was selected based on the change in emulsion properties.

RESULTS

The 300W sonication power was selected due to its most effectively decreased emulsion droplet size and increased absolute zeta potential. Sonication more significantly increased the protein carbonyl content and disulfide bonds of the MP-soybean oil sample than MP sample. Due to the existence of oil, ultrasound could unfold more protein molecules illustrated by a lower α-helix content and intrinsic fluorescence intensity, and a higher surface hydrophobicity. LC-MS/MS results illustrated that sonication enhanced the myosin heavy chain and actin content at the soybean oil interface as well as accelerated the myosin light chain to separate from myosin in the MP-soybean oil system.

CONCLUSION

In summary, ultrasound treatment could lead to a higher level of protein oxidation and more protein molecule exposure in the MP with the presence of oil system than in the oil-free MP system. This article is protected by copyright. All rights reserved.

Food Emulsion Gels from Plant-Based Ingredients: Formulation, Processing, and Potential Applications

Recent advances in the understanding of formulations and processing techniques have allowed for greater freedom in plant-based emulsion gel design to better recreate conventional animal-based foods. The roles of plant-based proteins, polysaccharides, and lipids in the formulation of emulsion gels and relevant processing techniques such as high-pressure homogenization (HPH), ultrasound (UH), and microfluidization (MF), were discussed in correlation with the effects of varying HPH, UH, and MF processing parameters on emulsion gel properties. The characterization methods for plant-based emulsion gels to quantify their rheological, thermal, and textural properties, as well as gel microstructure, were presented with a focus on how they can be applied for food purposes. Finally, the potential applications of plant-based emulsion gels, such as dairy and meat alternatives, condiments, baked goods, and functional foods, were discussed with a focus on sensory properties and consumer acceptance. This study found that the implementation of plant-based emulsion gel in food is promising to date despite persisting challenges. This review will provide valuable insights for researchers and industry professionals looking to understand and utilize plant-based food emulsion gels.

Preparation of high complex concentration emulsion stabilized by soy protein/dextran sulfate composite particles

BACKGROUND

Soy protein isolate (SPI) could be used as an emulsifier to stabilize emulsions, while SPI is unstable under low acidic conditions. The stable composite particles of SPI and dextran sulfate (DS) could be formed by the electrostatic interaction at the pH was 3.5. And the SPI/DS composite particles were used to prepare the high complex concentration emulsion. The stabilization properties of high complex concentration emulsion were investigated.

RESULTS

Compared to uncompounded SPI, the particle size of SPI/DS composite particles was smaller at 1.52 μm, and the absolute value of the potential increased to 19.9 mV when the mass ratio of SPI to DS was 1:1 and the pH was 3.5. With the DS ratio increased, the solubility of the composite particles increased to 14.44 times of the untreated protein at pH 3.5, while the surface hydrophobicity decreased. Electrostatic interactions and hydrogen bonds were the main forces between SPI and DS, and DS was electrostatically adsorbed on the surface of SPI. The emulsion stability significantly enhanced with the increase of complex concentration (38.88 times higher than at 1% concentration), the emulsion average droplet size was the lowest (9.64 μm), and the absolute value of potential was the highest (46.67 mV) when the mass ratio of SPI to DS was 1:1 and the complex concentration of 8%. The stability of the emulsion against freezing was improved.

CONCLUSION

The SPI/DS complex has high solubility and stability under low acidic conditions, and the SPI/DS complex' emulsion has a well stability. This article is protected by copyright. All rights reserved.

Ultrasound-assisted phosphorylation of goose myofibrillar proteins: improving protein structure and functional properties

BACKGROUND

Goose meat is rough and embedded with dense connective tissue, impairing protein solubility. Therefore, to improve the functional properties of goose myofibrillar protein (GMP), ultrasound was used to assist the phosphorylation of GMP.

RESULTS

The fact that GMP attached covalently with the phosphate group of sodium tripolyphosphate (GMP-STP) was disclosed directly by Fourier transform infrared spectroscopy. Furthermore, ultrasound significantly improved the hydrophobicity and solubility of GMP-STP, which could be attributed to the conversion of α-helix to β-sheet, β-turns, and random coils by sonication. The spatial stabilization of the protein phosphorylation process was boosted by ultrasound, making the droplets more dispersed, and thus an improvement in the functional properties of GMP-STP was observed. Water-holding capacity, oil-binding capacity, and emulsifying and foaming properties were best at an ultrasound power of 400 W.

CONCLUSION

Ultrasound-assisted phosphorylation has great potential to modulate the structure-function relationship of proteins. © 2023 Society of Chemical Industry.

Characteristics and potential application of myofibrillar protein from golden threadfin bream (Nemipterus virgatus) complexed with chitosan

The strategies to broaden the applications of proteins involve their modification with polysaccharides. However, the characteristics and application of myofibrillar proteins (MPs) from golden threadfin bream (Nemipterus virgatus) complexed with chitosan (CS) are still unclear. Therefore, the characteristics of MPs complexed with CS and their application were investigated at different MP/CS ratios (100:0-80:20 (w/w)). The turbidity of MP/CS complexes was small at the MP/CS ratio of 95:5 (w/w). Besides, CS addition induced changes in MP structure to make it hydrophilic. Secondary structure analysis showed that α-helix and β-turn interconverted with β-sheet and random coil after the addition of CS. Additionally, the thermal stability of MP/CS mixtures enhanced after the addition of CS and the MP/CS mixtures at the ratio of 95:5 (w/w) had a relatively compact structure. High internal phase emulsions (HIPEs) prepared at the MP/CS ratio of 95:5 (w/w) were relatively stable compared to those at the other ratios. Consequently, MP/CS mixtures at suitable ratios possess the potential ability to prepare HIPEs. These results exhibit that MP/CS mixtures may be applied for constructing food-graded emulsion delivery systems with a high internal phase in the food industry.

Effect of konjac oligo-glucomannan on emulsifying properties of myofibrillar protein

BACKGROUND

The high viscosity of konjac glumannan (KGM) limits its application in meat processing. In this work, the effects of konjac oligo-glucomannan (KOG), as a derivative of KGM, on the emulsifying properties of myofibrillar protein (MP) and the related mechanism were investigated.

RESULTS

It was found that the addition of KOG had no significant effect on the secondary structure of MP, but altered the tertiary conformation of MP, resulting in exposure of tyrosine residues to polar microenvironments and decreased intrinsic fluorescence intensity. In addition, the addition of KOG increased the emulsifying activity of MP, resulting in decreased particle size and improved physical stability of the emulsion. The emulsifying activity of MP reached the maximum value when 1.0 wt% KOG was added. Moreover, the interfacial tension and interfacially adsorbed protein content of MP/KOG emulsions decreased with the increase in KOG concentration.

CONCLUSION

These findings demonstrated that KOG mainly interacted with MP and changed the amphipathy of the KOG-MP at the oil-water interface, forming a stable interface film to improve the emulsifying properties of MP. © 2023 Society of Chemical Industry.

Effects of dual succinylation and ultrasonication modification on the structural and functional properties of ovalbumin

In this study, the functional properties of ovalbumin (OVA) were improved through dual modification with succinylation (succinylation degrees of 32.1 % [S1], 74.2 % [S2], and 95.2 % [S3]) and ultrasonication (ultrasonication durations of 5 min [U1], 15 min [U2], and 25 min [U3]), and the changes in protein structures were explored. Results showed that as the succinylation degree was increased, the particle size and surface hydrophobicity of S-OVA decreased by the maximum values of 2.2 and 2.4 times, respectively, causing emulsibility and emulsifying stability to increase by 2.7 and 7.3 times, respectively. After ultrasonic treatment, the particle size of succinylated-ultrasonicated OVA (SU-OVA) had decreased by 3.0-5.1 times relative to that of S-OVA. Moreover, the net negative charge of S3U3-OVA had increased to the maximum value of - 35.6 mV. These changes contributed to the further enhancement in functional indicators. The unfolding of the protein structure and the conformational flexibility of SU-OVA were illustrated and compared with those of S-OVA via protein electrophoresis, circular dichroism spectroscopy, intrinsic fluorescence spectroscopy, and scanning electron microscopy. The dually modified OVA emulsion (S3U3-E) presented small droplets (243.33 nm), reduced viscosity, and weakened gelation behavior that were indicative of even distribution, which was visually proven by confocal laser scanning microscopy images. Furthermore, S3U3-E exhibited favorable stability, a particle size that was almost unchanged, and a low polydispersity index (<0.1) over 21 days of storage at 4 °C. The above results demonstrated that succinylation combined with ultrasonic treatment could be an effective dual modification method for enhancing the functional performance of OVA.

Formation mechanism and functional properties of walnut protein isolate and soy protein isolate nanoparticles using the pH-cycle technology

Walnut protein isolate (WPI) is a nutritious protein with poor solubility, which severely limits its application. In this study, composite nanoparticles were prepared from WPI and soy protein isolate (SPI) using the pH-cycle technology. The WPI solubility increased from 12.64 to 88.53% with a WPI: SPI ratio increased from 1: 0.01 to 1: 1. Morphological and structural analyses illustrated that interaction forces with hydrogen bonding as the main effect jointly drive the binding of WPI to SPI and that protein co-folding occurs during the neutralization process, resulting in a hydrophilic rigid structure. In addition, the interfacial characterization showed that the composite nanoparticle with a large surface charge enhanced the affinity with water molecules, prevented protein aggregation, and protected the new hydrophilic structure from damage. All these parameters helped to maintain the stability of the composite nanoparticles in a neutral environment. Amino acid analysis, emulsification capacity, foaming, and stability analysis showed that the prepared WPI-based nanoparticles exhibited good nutritional and functional properties. Overall, this study could provide a technical reference for the value-added use of WPI and an alternative strategy for delivering natural food ingredients.

Synergistic effects of psyllium husk powder and different levels of methylcellulose on the storage stability of sodium caseinate emulsion

The study investigated the effects of compound fibers composed of psyllium husk powder (PHP, 0.3%) and methylcellulose (MC, 0, 0.3, 0.6, 0.9, and 1.2%) on the storage stability, rheology, and microstructure of sodium caseinate emulsions. Results showed that the emulsion stability was enhanced with the increased concentrations of MC, especially at the concentration of 1.2%. The oil droplet size in the emulsions was decreased as the concentrations of compound fibers increased, which was further confirmed by the optical microscope analysis. The rheological measurements and cryo-scanning electron microscopy results indicated that compound fibers improved the viscosity of the emulsions, and formed a strong three-dimensional network structure. The results of confocal laser scanning microscope and surface protein concentration measurements showed that compound fibers were evenly distributed into the oil droplet surface. The above results demonstrate that compound fibers are an effective thickener and emulsifier in enhancing the stability properties of oil-in-water (O/W) emulsions stabilized by sodium caseinate.

Effects of Citrus Fiber on the Gel Properties of Mutton Myofibrillar Protein

This work investigated the effects of different additions of water-soluble citrus fiber (SCF) and water-insoluble citrus fiber (ICF) on the gel properties of the mutton myofibrillar protein (MP). The key parameters of water-holding capacity (WHC), rheological properties, and microstructure were evaluated. The addition of 2.5-10% of SCF and ICF significantly improved (p < 0.05) the WHC and gel strength of mutton MP gel. The rheological results showed that the viscoelasticity of MP with 5% SCF was the best, and the T₂ relaxation time of the gel was significantly shortened. SEM results showed SCF reduced the number of pores in the MP gel, forming a more compact network structure. ICF stabilized the MP gel network structure as a filler after water absorption and expansion. However, the gel lost moisture under the action of strong external force (freeze-drying), which left large pores. These data confirmed that SCF and ICF could effectively improve the gel properties of meat products.

Effects of hydrodynamic cavitation on physicochemical structure and emulsifying properties of tilapia (Oreochromis niloticus) myofibrillar protein

The purpose of this research was to explore the different hydrodynamic cavitation (HC) times (0, 5, 10, 15, 20 min; power 550 W, pressure 0.14 MPa) on the emulsifying properties of tilapia myofibrillar protein (TMP). Results of pH, particle size, turbidity, solubility, surface hydrophobicity, and reactive sulfhydryl (SH) group indicated that HC changed the structure of TMP, as confirmed by the findings of intrinsic fluorescence and circular dichroism (CD) spectra. Furthermore, HC increased the emulsifying activity index (EAI) significantly (P < 0.05) and changed the emulsifying stability index (ESI), droplet size, and rheology of TMP emulsions. Notably, compared with control group, the 10-min HC significantly decreased particle size and turbidity but increased solubility (P < 0.05), resulting in accelerated diffusion of TMP in the emulsion. The prepared TMP emulsion showed the highest ESI (from 71.28 ± 5.50 to 91.73 ± 5.56 min), the smallest droplet size (from 2,754 ± 110 to 2,138 ± 182 nm) and the best rheological properties, as demonstrated by the microstructure photographs. Overall, by showing the effect of HC in improving the emulsifying properties of TMP, the study demonstrated HC as a potential technique for meat protein processing.

Ultrasound-assisted processing: Changes in gel properties, water-holding capacity, and protein aggregation of low-salt Hypophthalmichthys molitrix surimi by soy protein isolate

The effects of ultrasound combined (25 kHz, 400 ± 20 W/L, ultrasonic time of 5, 10 and 15 min) with soy protein isolate processing on gelling properties of low-salt silver carp surimi, aggregation and conformation of myofibrillar protein were investigated. The results revealed that, compared with only adding soy protein isolate components, ultrasound-assisted soy protein isolate had a more obvious effect on the protein structure in low-salt surimi, leading to the decrease in α-helix and total sulfhydryl contents, and the increase in β-sheet content and protein solubility. As a result, more proteins participated in the formation of the gel network, and significant improvements in hardness, gel strength and water-holding capacity of the low-salt surimi gel were observed, while the myosin heavy chain in SDS-PAGE was weakened. The low-field NMR results showed that the initial relaxation time of T₂ was apparently shorter, the free water content decreased and the bound water content increased under the action of ultrasound. Scanning electron microscope observation found that the surimi gel treated by ultrasound exhibited smaller holes, and had a more stable and denser network structure. In conclusion, the results of our work demonstrated that ultrasound combined with soy protein isolate can significantly improve the gel quality properties of low-salt silver carp.

Improvement of structural, physicochemical, and rheological properties of porcine myofibrillar proteins by high-intensity ultrasound treatment for application as Pickering stabilizers

This study aimed to evaluate the potential of time-dependent (0, 15, 30, 60, 120 min) treatment of porcine-derived myofibrillar proteins (MPs) with high-intensity ultrasound (HIU) for utilizing them as a Pickering stabilizer and decipher the underlying mechanism by which HIU treatment increases the emulsification and dispersion stability of MPs. To accomplish this, we analyzed the structural, physicochemical, and rheological properties of the HIU-treated MPs. Myosin heavy chain and actin were observed to be denatured, and the particle size of MPs decreased from 3,342.7 nm for the control group to 153.9 nm for 120 min HIU-treated MPs. Fourier-transformed infrared spectroscopy and circular dichroism spectroscopy confirmed that as the HIU treatment time increased, α-helical content increased, and β-sheet decreased, indicating that the protein secondary/tertiary structure was modified. In addition, the turbidity, apparent viscosity, and viscoelastic properties of the HIU-treated MP solution were decreased compared to the control, while the surface hydrophobicity was significantly increased. Analyses of the emulsification properties of the Pickering emulsions prepared using time-dependent HIU-treated MPs revealed that the emulsion activity index and emulsion stability index of HIU-treated MP were improved. Confocal laser scanning microscopy images indicated that small spherical droplets adsorbed with MPs were formed by HIU treatment and that dispersion stabilities were improved because the Turbiscan stability index of the HIU-treated group was lower than that of the control group. These findings could be used as supporting data for the utilizing porcine-derived MPs, which have been treated with HIU for appropriate time periods, as Pickering stabilizers.

Conformation changes and emulsifying properties of myofibrillar proteins in water: Effects of electrostatic interaction with chitosan

Great interests have been attracted toward muscle protein in a water-soluble state with improved functionality for further designing meat protein fortified low-salt functional foods. In the present study, electrostatic interaction of chitosan (CH) with myofibrillar proteins (MP) in water aqueous solution was investigated, and the linked structure changes and emulsion stabilization of MP were studied. Results showed that the electrostatic interaction inhibited MP aggregation, and smaller particle size complexes were formed at pH 6.0, leading to the loss of β-sheet contents and recovery of α-helix contents with decreasing MP/CH mixing ratio (5:1 and 1:1). The tertiary structure confirmed the conformation changes of MP in which more hydrophobic groups and active sulfhydryl groups were exposed (P < 0.05), and the fluorescence was also quenched. With decreasing mixing ratio, the droplet size of emulsion decreased (P < 0.05), while the absorbed protein content increased (P < 0.05). After 7 d of storage, complex at a ratio of 1:1 displayed desirable emulsion stability, which could be due to the improved emulsifying capacity, enhanced electrostatic repulsion and steric effects. These findings provide a better understanding of conformation changes of MP in water aqueous solution induced by electrostatic interactions at mild acidic pH and help to fabricate stable protein/polysaccharide emulsification systems for further developing meat protein-based functional food to deliver health.

Physicochemical Properties and Oxidative Stability of an Emulsion Prepared from (-)-Epigallocatechin-3-Gallate Modified Chicken Wooden Breast Myofibrillar Protein

The deterioration of wooden breast myofibrillar protein (WBMP) causes a decline in its processing performance, and the protein becomes easier to oxidize. Previous studies have revealed that the use of (-)-epigallocatechin-3-gallate (EGCG) may improve the physicochemical properties and oxidative stability of proteins in aqueous solutions. The effects of varying concentrations (0.01%, 0.02%, 0.03%, and 0.04% w/v) of EGCG on the physicochemical properties of a WBMP emulsion (1.2% WBMP/10% oil) and the inhibition of lipid and protein oxidation were studied. The results revealed that a moderate dose of EGCG (0.03%) could significantly (p < 0.05) improve the emulsion activity index (4.66 ± 0.41 m2/g) and emulsion stability index (91.95 ± 4.23%), as well as reduce the particle size of the WBMP emulsion. According to the micrographs and cream index, 0.03% EGCG retarded the phase separation by stopping the aggregation of droplets and proteins, thus significantly improving the stability of WBMP emulsions. During storage at 50 °C for 96 h, 0.03% EGCG inhibited lipid oxidation (lipid hydroperoxide and 2-thiobarbituric acid-reactive substance formation) and protein oxidation (carbonyl formation and sulfhydryl loss). In contrast, lower and higher EGCG concentrations (0.01%, 0.02%, and 0.04%) demonstrated shortcomings (such as weak antioxidant capacity or protein over-aggregation) in improving the quality and oxidation stability of the emulsion. In conclusion, a moderate dose of EGCG (0.03%) can be used to improve the quality and shelf life of WBMP emulsions.

Changes in Gel Characteristics, Rheological Properties, and Water Migration of PSE Meat Myofibrillar Proteins with Different Amounts of Sodium Bicarbonate

The changes in the gel and rheological properties and water-holding capacity of PSE meat myofibrillar proteins with different amounts of sodium bicarbonate (SC, 0−0.6/100 g) were studied. Compared to the PSE meat myofibrillar proteins with 0/100 g SC, the texture properties and cooking yield significantly increased (p < 0.05) with increasing SC; meanwhile, adding SC caused the gel color to darken. All samples had similar curves with three phases, and the storage modulus (G’) values significantly increased with the increasing SC. The thermal stability of the PSE meat myofibrillar proteins was enhanced, and the G’ value at 80 °C increased with the increasing SC. Because water was bound more tightly to the protein matrix, the initial relaxation times of T21 and T22 shortened, the peak ratio of P21 significantly increased (p < 0.05), and the P22 significantly decreased (p < 0.05), which implied that the mobility of the water was reduced. Overall, SC could improve the thermal stability of the PSE meat myofibrillar proteins and increase the water-holding capacity and textural properties of the cooked PSE meat myofibrillar protein gels.

Changes in Gelation Properties of Silver Carp Myosin Treated by Combination of High Intensity Ultrasound and NaCl

The molecular behavior of myosin in a low-salt environment limited the production of surimi-based products. This study aimed to investigate the effect of the combination of high intensity ultrasound (HIU) and NaCl (0.1, 0.3, 0.5 mol/L) on the physicochemical indexes of myosin. The changes were evaluated by solubility, ultraviolet (UV) spectroscopy, dynamic rheological properties, water holding capacity (WHC), microstructures, etc. For control samples, the gelation properties of myosin strengthened upon NaCl increasing. Combination of HIU and NaCl significantly improved the solubility of myosin, which was due to the conformational changes and the exposure of reactive groups. Meanwhile, the particle size of myosin obviously decreased when observed by atomic force microscope, which in turn promoted the stability of myosin. Furthermore, the improvement in solution behaviors of myosin treated by combination of HIU and NaCl contributed to the gelation properties as well as the formation of compact microstructures, which obtained high WHC and low cooking loss of myosin gels. In conclusion, combination of HIU and NaCl induced the unfolding of myosin with the exposure of reactive groups, consequently facilitating the formation of denser microstructures. Moreover, the biggest degree of improvement in gelation properties was observed at 0.1 mol/L NaCl combined with HIU.

Effect of Ultrasound-Assisted Sodium Bicarbonate Treatment on Aggregation and Conformation of Reduced-Salt Pork Myofibrillar Protein

To study the effects of an ultrasound (0, 30, and 60 min) and sodium bicarbonate (0% and 0.2%) combination on the reduced-salt pork myofibrillar protein, the changes in pH, turbidity, aggregation, and conformation were investigated. After the ultrasound-assisted sodium bicarbonate treatment, the pH increased by 0.80 units, the absolute value of Zeta potential, hydrophobic force, and active sulfhydryl group significantly increased (p < 0.05), and the turbidity and particle size significantly decreased (p < 0.05). Meanwhile, the fluorescence intensity decreased from 894 to 623, and the fluorescence peak showed a significant redshift, which indicated that the ultrasound-assisted sodium bicarbonate treatment exposed the non-polarity of the microenvironment in which the fluorescence emission group was located, leading to the microenvironment and protein structure of myofibrillar tryptophan being changed. Overall, an ultrasound-assisted sodium bicarbonate treatment could significantly improve pork myofibrillar protein solubility and change the protein structure under a reduced-salt environment.

High-intensity ultrasound improved the physicochemical and gelling properties of Litopenaeus vannamei myofibrillar protein

The effects of high-intensity ultrasound on the physicochemical and gelling properties of Litopenaeus vannamei (L. vannamei) myofibrillar protein (MP) were investigated. MP solutions were subjected to ultrasound treatment (power 100 W, 300 W, and 500 W). It was found that the carbonyl and free amino contents of MP increased significantly with increasing ultrasound power, accompanied by enhanced emulsification properties. The increase of free radical and carbonyl content indicated that ultrasound induced the oxidation of MP. With the increase of ultrasound power, it was found that the total sulfhydryl content of the shrimp MP decreased, but the surface hydrophobicity increased significantly, which might be closely related to the conformational changes of MP. Meanwhile, a significant increase of β-sheet but a decrease of α-helix in the secondary structure of MP was observed with increasing ultrasound power, indicating that ultrasound treatment induced the stretching and flexibility of MP molecules. SDS-PAGE showed that L. vannamei MP consisted of myosin heavy chain, actin, myosin light chain, paramyosin and tropomyosin. Ultrasound treatment could lead to some degree of oxidative aggregation of MP. The results of rheological properties indicated that ultrasound treatment enhanced the viscoelasticity of MP and further improved the gel strength of MP gel. This study can provide a theoretical basis for the functional modification of shrimp MP and the processing of its surimi products.

Strategies to optimize the structural and functional properties of myofibrillar proteins: Physical and biochemical perspectives

Myofibrillar protein (MP), as the main meat protein, have high nutritional value. However, the relatively poor solubility of MP at low ionic strength sometimes limits the utilization of MP to produce products rich in meat protein. Accordingly, appropriate modification of MP is needed to improve their functional properties. In general, MP modification strategies are categorized into biochemical and physical approaches. Different from other available reviews, the review focuses on summarizing the principles and applications of several techniques of physical modification, briefly depicting biochemical modification as a comparison. Modification of MP with a certain intensity of direct current magnetic field, ultrasound, high pressure, microwave, or radio frequency can improve solubility, emulsification, stability, and gel formation. Of these, magnetic field and microwave-modified MP have shown some potential in reducing salt in meat. These physical techniques can also have synergistic effects with other conditions (temperature, pH, physical or chemical techniques) to compensate for the deficiencies of individual treatment techniques. However, these strategies still need further research for practical applications.HIGHLIGHTSThe current status and findings of research on direct current magnetic field in meat processing are presented.Several physical strategies to modify the microstructure and functional properties of MPs.The synergistic effects of these techniques in combination with other methods to modify MPs are discussed.

Ultrasound-assisted modification of gelation properties of proteins: A review

Protein gels have diverse applications in the food, pharmaceutical, and cosmetic sectors due to their affordability, biodegradability, and edibility. However, the inherent properties of some native proteins have a few drawbacks that have to be tailored to meet the needs of specific functions as the food ingredients. The protein gelation properties mainly depend on the protein molecular structure, primarily the folding and unfolding of secondary structural elements (α-helix and β-sheets) with distinctive functions. In the past, a great amount of work (thermal, chemical, and enzymatic methods) has been carried out to enhance the gelation and functional properties of proteins. Recently, the traditional methods have been replaced with non-thermal physical methods that enhance the properties for better applications. One such approach is the use of ultrasonic technology as a low-cost green technology to modify the molecular orientation attributed to the native chemistry and functionality of that proteins. Ultrasonic technology is important in food systems and can be effectively used as an alternative method to improve the protein gelling characteristics to form high-quality gels. This article is aimed to comprehensively collate some of the vital information published on the mechanism of protein gelation by ultrasonication and review the effects of ultrasound-assisted extraction and treatments on gelation properties of different proteins. The enhanced gelation properties by the ultrasound application open a new stage of technology that enables the proteins for better utilization in the food processing sector.

Effects of High-Intensity Ultrasound Treatments on the Physicochemical and Structural Characteristics of Sodium Caseinate (SC) and the Stability of SC-Coated Oil-in-Water (O/W) Emulsions

The effects of high-intensity ultrasound treatment (0, 3, 6, 9 min) on physicochemical and structural characteristics of SC and the storage, thermal and freeze–thaw stability of SC O/W emulsions were investigated. The results showed that ultrasound treatment reduced the particle size of SC, although there were no obvious changes in zeta potential, profiles and weights. Ultrasound treatment improved surface hydrophobicity and fluorescence intensity of SC and changed ultraviolet–visible (UV–Vis) spectroscopy but had no influence on the secondary structure of SC. This indicates that ultrasounds might destroy the tertiary structure but leave most of the integral secondary structure. A scanning electron microscope (SEM) also showed that ultrasound-treated SC presented small aggregates and a loose structure. The physicochemical and structural changes of SC benefited the ability of protein adsorbing oil droplets and emulsion stability. Under stresses such as storage, thermal and freeze–thawing, the oil droplets of treated emulsions were still uniform and stable, especially at 6 min and 9 min. Overall, the high-intensity ultrasounds made the SC present small aggregates and a loose structure improving the SC O/W emulsions stability under storage, thermal and freeze–thawing environment and have great potential to stabilize the SC prepared O/W emulsions.

Effects of ultrasonic treatment on ovomucin: Structure, functional properties and bioactivity

The effects of ultrasonic treatment on the structure, functional properties and bioactivity of Ovomucin (OVM) were investigated in this study. Ultrasonic treatment could significantly enhance OVM solubility without destroying protein molecules. The secondary structure changes, including β-sheet reduction and random coil increase, indicate more disorder in OVM structure. After ultrasonic treatment, the OVM molecule was unfolded partially, resulting in the exposure of hydrophobic regions. The changes in OVM molecules led to an increase in intrinsic fluorescence and surface hydrophobicity. By detecting the particle size of protein solution, it was confirmed that ultrasonic treatment disassembled the OVM aggregations causing a smaller particle size. Field emission scanning electron microscopy (FE-SEM) images showed that ultrasonic cavitation significantly reduced the tendency of OVM to form stacked lamellar structure. Those changes in structure resulted in the improvement of foaming, emulsification and antioxidant capacity of OVM. Meanwhile, the detection results of ELISA showed that ultrasonic treatment did not change the biological activity of OVM. These results suggested that the relatively gentle ultrasound treatment could be utilized as a potential approach to modify OVM for property improvement.

Effect of ultrasound-assisted sodium bicarbonate treatment on gel characteristics and water migration of reduced-salt pork batters

To study the potential usefulness of ultrasound (0, 30, and 60 min) and sodium bicarbonate (0 % and 0.2 %) combination on the reduced-salt pork batters, the changes in water holding capacity, gel properties, and microstructure were investigated. The pH, salt-soluble proteins solubility, cooking yield, and b* values of reduced-salt pork batters significantly increased (P < 0.05) with the increase in ultrasound time and the addition of sodium bicarbonate, leading to the hardness, springiness, cohesiveness, and chewiness significantly increased (P < 0.05). Furthermore, the use of ultrasound-assisted sodium bicarbonate treatment caused the reduced-salt pork batters to form a typical spongy structure with more evenly cavities. Due to the initial relaxation time of T₂₁ and T₂₂ were shorter, and the peak ratio of P₂₁ was increased and P₂₂ was decreased after ultrasound-assisted sodium bicarbonate treatment, implying that the mobility of water was reduced. Thus, the use of ultrasound-assisted sodium bicarbonate treatment enabled reduced-salt pork batters to have better gel characteristics and higher cooking yield.