Three-dimensional modeling of single stranded DNA hairpins for aptamer-based biosensors

DNA/RNA recognition controlled by the glycine linker and the guanidine moiety of phenanthridine peptides

The binding of four phenanthridine-guanidine peptides to DNA/RNA was evaluated via spectrophotometric/microcalorimetric methods and computations. The minor structural modifications-the type of the guanidine group (pyrrole guanidine (GCP) and arginine) and the linker length (presence or absence of glycine)-greatly affected the conformation of compounds and consequently the binding to double- (ds-) and single-stranded (ss-) polynucleotides. GCP peptide with shorter linker was able to distinguish between RNA (A-helix) and DNA (B-helix) by different circular dichroism response at 295 nm and thus can be used as a chiral probe. Opposed to the dominant stretched conformation of GCP peptide with shorter linker, the more flexible and longer linker of its analogue enabled the molecule to adopt the intramolecularly stacked form which resulted in weaker yet selective binding to DNA. Beside efficient organization of ss-polynucleotide structures, GCP peptide with shorter linker bound stronger to ss-DNA/RNA compared to arginine peptides which emphasize the importance of GCP unit.

Computational analysis and optimization of carcinoembryonic antigen aptamers and experimental evaluation

Carcinoembryonic antigen (CEA), a highly glycosylated protein, overexpresses in many cancers. In this study, computational methods were used to optimize CEA aptamers. Experimental evaluvation of selected aptamers were conducted through electrochemical impedance spectroscopy. After two and three-dimensional structure modeling, the complexes of twelve reported aptamers against CEA were simulated using the ZDOCK server. Based on docking scores, two aptamer sequences (CSR59 and CSR57.1) were selected and used to create a new library. This ssDNA aptamer library consisting of 91 sequences was created using diverse in silico mutational methods. We obtained seventeen sequences having higher binding scores than reported sequences. Based on ZDOCK scores, the interaction domain of CEA, and steric hindrance due to glycosylation, two aptamer sequences (G3S1.5 and G2S2.2) were selected. An impedimetric aptasensor was designed, and selected aptamers were used as biorecognition elements. Resistance to charge transfer (Rct) quantities confirmed the bioinformatic approach and molecular docking scores. The result showed that the interaction ability of selected aptamers was about 13.5 fold higher than the control. It can be concluded that the selected aptamers have good potential for detection of carcinoembryonic antigen biomarker.

Beacons Contribute Valuable Empirical Information to Theoretical 3-D Aptamer-Peptide Binding

DNA aptamers were developed against five different peptides from the known binding regions of anti-Cytomegalovirus and anti-Herpes Simplex Virus-2 antibodies and the aptamers were ranked by relative affinity based on an ELISA-like (ELASA) microplate assay. The secondary structures of the top five highest affinity aptamers were studied for stem-loop commonalities and the most probable peptide binding sites. Two of these stem-loop structures were converted into beacons by addition of TYE 665 dye on the 5' end and Iowa Black quencher on the 3' end. When competed against increasing concentrations of each of the five peptides, only three of the possible ten interactions demonstrated "lights on" fluorescence beacon responses. When modeled by generation of PDB files, after passage through PATCHDOCK and YASARA, two of the aptamer beacon-peptide interactions showed no theoretical evidence of separating the G-C stem-loop region, despite clear empirical evidence of separation of the fluorophore and quencher beyond the Förster distance leading to abundant fluorescence. And in the second beacon's case, YASARA modeling suggested that the beacon was always open despite clear empirical evidence that it was not (no fluorescence response) and only opened in the presence of one of the five peptides. These results are interpreted as a demonstration that 3-dimensional docking software such as PATCHDOCK and YASARA, which are based on rigid receptor-ligand shape complementarity may not reflect the "induced-fit" interactions between aptamers and their cognate targets. Therefore, for the most complete and accurate picture of aptamer-peptide binding, several theoretical and empirical (e.g., beacon fluorescence) analysis methods may be needed.

The role of G-quadruplex structures of LIGS-generated aptamers R1.2 and R1.3 in IgM specific recognition

Exploiting a variant of SELEX called "Ligand-Guided Selection" (LI-GS), we recently identified two novel truncated G-rich aptamers, called R1.2 and R1.3, specific for membrane-bound IgM (mIgM), the hallmark of B cells. Herein, the conformational behaviour of these aptamers has been analysed by multiple biophysical methods. In order to investigate their functional secondary structures, these studies have been carried out in pseudo-physiological buffers mimicking different cellular environments. Both aptamers proved to be highly polymorphic, folding into stable, unimolecular G-quadruplex structures in K⁺-rich buffers. In turn, in buffered solutions containing Na⁺/Mg²⁺ ions, R1.2 and R1.3 formed mainly duplex structures. Remarkably, these aptamers were able to effectively bind mIgM on B-cell lymphoma exclusively in the presence of potassium ions. These findings demonstrate the key role of G-quadruplex folding in the molecular recognition and efficient binding of R1.2 and R1.3 to mIgM expressed in lymphoma and leukemia cells, providing a precious rational basis for the design of effective aptamer-based biosensors potentially useful for the detection of cancer-relevant biomarkers.

DNA aptamers for the recognition of HMGB1 from Plasmodium falciparum

Rapid Diagnostic Tests (RDTs) for malaria are restricted to a few biomarkers and antibody-mediated detection. However, the expression of commonly used biomarkers varies geographically and the sensibility of immunodetection can be affected by batch-to-batch differences or limited thermal stability. In this study we aimed to overcome these limitations by identifying a potential biomarker and by developing molecular sensors based on aptamer technology. Using gene expression databases, ribosome profiling analysis, and structural modeling, we find that the High Mobility Group Box 1 protein (HMGB1) of Plasmodium falciparum is highly expressed, structurally stable, and present along all blood-stages of P. falciparum infection. To develop biosensors, we used in vitro evolution techniques to produce DNA aptamers for the recombinantly expressed HMG-box, the conserved domain of HMGB1. An evolutionary approach for evaluating the dynamics of aptamer populations suggested three predominant aptamer motifs. Representatives of the aptamer families were tested for binding parameters to the HMG-box domain using microscale thermophoresis and rapid kinetics. Dissociation constants of the aptamers varied over two orders of magnitude between nano- and micromolar ranges while the aptamer-HMG-box interaction occurred in a few seconds. The specificity of aptamer binding to the HMG-box of P. falciparum compared to its human homolog depended on pH conditions. Altogether, our study proposes HMGB1 as a candidate biomarker and a set of sensing aptamers that can be further developed into rapid diagnostic tests for P. falciparum detection.

Rapid detection of pathogens using lyotropic liquid crystals

Lyotropic liquid crystals play an important role in many biological environments, such as micelles, liposomes, and phospholipid bilayers of cell membranes. In this work, we explore the performance of lyotropic liquid crystals as biosensors for macromolecules, proteins and whole microorganisms in hydrophilic media, i.e., the natural media where these specimens exist. The aim is to detect specific targets employing simple, unpowered sensors that can be used in the field, with minimum additional equipment. A number of different structures have been explored. The novelty in this work is the inclusion of a new optical effect, flow enhanced amplification, that allows for the semiquantitative detection of microscopic targets in lyotropic liquid crystal cells using the naked eye only.

Recent Advances in Aptamer Discovery and Applications

Aptamers are short, single-stranded DNA, RNA, or synthetic XNA molecules that can be developed with high affinity and specificity to interact with any desired targets. They have been widely used in facilitating discoveries in basic research, ensuring food safety and monitoring the environment. Furthermore, aptamers play promising roles as clinical diagnostics and therapeutic agents. This review provides update on the recent advances in this rapidly progressing field of research with particular emphasis on generation of aptamers and their applications in biosensing, biotechnology and medicine. The limitations and future directions of aptamers in target specific delivery and real-time detection are also discussed.

Aptamers as quality control tool for production, storage and biosimilarity of the anti-CD20 biopharmaceutical rituximab

Detailed analysis of biopharmaceuticals is crucial for safety, efficacy and stability. Aptamers, which are folded, single-stranded oligonucleotides, can be used as surrogate antibodies to detect subtle conformational changes. We aimed to generate and assess DNA aptamers against the therapeutic anti-CD20 antibody rituximab. Six rituximab-specific aptamers with Kd = 354-887 nM were obtained using the magnetic bead-based systematic evolution of ligands by exponential enrichment (SELEX) technology. Aptamer folds were analysed by online prediction tools and circular dichroism spectroscopy suggesting quadruplex structures for two aptamers while others present B-DNA helices. Aptamer binding and robustness with respect to minor differences in buffer composition or aptamer folding were verified in the enzyme-linked apta-sorbent assay. Five aptamers showed exclusive specificity to the Fab-fragment of rituximab while one aptamer revealed a broader recognition pattern to other monoclonal antibodies. Structural differences upon incubation at 40 °C for 72 h or UV exposure of rituximab were uncovered by four aptamers. High similarity between rituximab originator and biosimilar lots was demonstrated. The most sensitive aptamer (RA2) detected signal changes for all lots of a copy product suggesting conformational differences. For the first time, a panel of rituximab-specific aptamers was generated allowing the assessment of conformational coherence during production, storage, and biosimilarity of different products.

Prediction, docking study and molecular simulation of 3D DNA aptamers to their targets of endocrine disrupting chemicals

Typical endocrine disrupting chemicals, including BPA (Bisphenol A), E₂ (17-β-Estradiol) and PCB 72 (polychlorinated biphenyl 72), are commonly and widely present in the environment with good chemical stability that are difficult to decompose in vitro and in vivo. Most of the high-qualified antibodies are required as the key biomaterials to fabricate the immunosensor for capturing and detecting. As an ideal alternative, the short-chain oligonucleotides (aptamer) are essentially and effectively employed with the advantages of small size, chemical stability and high effectiveness for monitoring these environmental contaminants. However, the molecular interaction, acting site and mode are still not well understood. In this work, we explored the binding features of the aptamers with their targeting ligands. The molecular dynamics simulations were performed on the aptamer-ligand complex systems. The stability of each simulation system was evaluated based on its root-mean-square deviation. The affinities of these proposed ligands and the predicted binding sites are analyzed. According to the binding energy analysis, the affinities between ligands and aptamers and the stability of the systems are BPA > PCB 72 >E₂. Trajectory analysis for these three complexes indicated that these three ligands were able to steadily bind with aptamers at docking site from 0 to 50 ns and contributed to alteration of conformation of aptamers.

Advanced Selection Methodologies for DNAzymes in Sensing and Healthcare Applications

DNAzymes have been widely explored owing to their excellent catalytic activity in a broad range of applications, notably in sensing and biomedical devices. These newly discovered applications have built high hopes for designing novel catalytic DNAzymes. However, the selection of efficient DNAzymes is a challenging process but one that is of crucial importance. Initially, systemic evolution of ligands by exponential enrichment (SELEX) was a labor-intensive and time-consuming process, but recent advances have accelerated the automated generation of DNAzyme molecules. This review summarizes recent advances in SELEX that improve the affinity and specificity of DNAzymes. The thriving generation of new DNAzymes is expected to open the door to several healthcare applications. Therefore, a significant portion of this review is dedicated to various biological applications of DNAzymes, such as sensing, therapeutics, and nanodevices. In addition, discussion is further extended to the barriers encountered for the real-life application of these DNAzymes to provide a foundation for future research.

Probing ATP/ATP-Aptamer or ATP-Aptamer Mutant Complexes by Microscale Thermophoresis and Molecular Dynamics Simulations: Discovery of an ATP-Aptamer Sequence of Superior Binding Properties

Microscale thermophoresis (MST) is used to follow the dissociation constants corresponding to ATTO 488-labeled adenosine triphosphate (ATP) and the ATP-aptamer or ATP-aptamer mutants that include two binding sites for the ATP ligand. A set of eight ATP-aptamer mutants, where the thymidine bases, within the reported ATP binding aptamer sites, are substituted with cytosine bases, are examined. The MST-derived dissociation constant of ATP to the reported aptamer is K_d = 31 ± 3 μM, whereas most of the aptamer mutants show lower affinity (higher K_d values) toward the ATP ligand. One aptamer mutant reveals, however, a higher affinity toward the ATP ligand, as compared to the reported ATP-aptamer. Molecular dynamics and docking simulations identify the structural features that control the affinities of binding of the ATP ligand to the two binding sites associated with the ATP-aptamer or the ATP-aptamer mutants. The simulated structures suggest that H-bonds between the ATP ligand and G₉ and G₁₁ bases, within one binding domain, and the π-π interactions between G₆ and the ATP purine moiety and the pyrimidine ring, in the second binding domain, control the affinity of binding interactions between the ATP ligand and the ATP-aptamer or ATP-aptamer mutant. Very good correlation between the computed  K_d values and the MST-derived K_d values is found. The ATP-aptamer mutant (consisting of A₁→ G, T₄ → C, T₁₂ → C, A₂₄ → G, and T₂₇ → C mutations) reveals superior binding affinities toward the ATP ligands ( K_d = 15 ± 1 μM) as compared to the binding affinity of ATP to the reported aptamer. These features of the mutant are supported by molecular dynamics simulations.

Molecular Modeling Applied to Nucleic Acid-Based Molecule Development

Molecular modeling by means of docking and molecular dynamics (MD) has become an integral part of early drug discovery projects, enabling the screening and enrichment of large libraries of small molecules. In the past decades, special emphasis was drawn to nucleic acid (NA)-based molecules in the fields of therapy, diagnosis, and drug delivery. Research has increased dramatically with the advent of the SELEX (systematic evolution of ligands by exponential enrichment) technique, which results in single-stranded DNA or RNA sequences that bind with high affinity and specificity to their targets. Herein, we discuss the role and contribution of docking and MD to the development and optimization of new nucleic acid-based molecules. This review focuses on the different approaches currently available for molecular modeling applied to NA interaction with proteins. We discuss topics ranging from structure prediction to docking and MD, highlighting their main advantages and limitations and the influence of flexibility on their calculations.

Aptamer immobilization on amino-functionalized metal-organic frameworks: an ultrasensitive platform for the electrochemical diagnostic of Escherichia coli O157:H7

Herein, we report the development of an electrochemical biosensor for Escherichia coli O157:H7 diagnostic based on amino-functionalized metal-organic frameworks (MOFs) as a new generation of organic-inorganic hybrid nanocomposites. The electrical and morphological properties of MOFs were enhanced by interweaving each isolated MOF crystal with polyaniline (PANI). Subsequent attachment of the amine-modified aptamer to the polyanilinated MOFs was accomplished using glutaraldehyde (GA) as a cross-linking agent. The prepared biocompatible platform was carefully characterized by means of field-emission scanning electron microscopy (FESEM), energy-dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), and X-ray powder diffraction (XRD) techniques. The biosensor fabrication and its electrochemical characterizations were monitored by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Differential pulse voltammetry (DPV) was applied to monitoring and quantitation of the interaction between the aptamer and E. coli O157:H7 using methylene blue (MB) as an electrochemical indicator. Changes in the reduction peak current of MB in the presence of E. coli O157:H7 was recorded as an analytical signal and indicated a relationship with the logarithm of the E. coli O157:H7 concentration in the range of 2.1 × 10¹ to 2.1 × 10⁷ CFU mL^-1 with a LOQ of 21 CFU mL^-1 and LOD of 2 CFU mL^-1. The electrochemical aptasensor displayed good recovery values for the detection of E. coli O157:H7 in environmental real samples and also could act as a smart device to investigate the effects of antibacterial agents against E. coli O157:H7.

Programmable and Multifunctional DNA-Based Materials for Biomedical Applications

DNA encodes the genetic information; recently, it has also become a key player in material science. Given the specific Watson-Crick base-pairing interactions between only four types of nucleotides, well-designed DNA self-assembly can be programmable and predictable. Stem-loops, sticky ends, Holliday junctions, DNA tiles, and lattices are typical motifs for forming DNA-based structures. The oligonucleotides experience thermal annealing in a near-neutral buffer containing a divalent cation (usually Mg²⁺ ) to produce a variety of DNA nanostructures. These structures not only show beautiful landscape, but can also be endowed with multifaceted functionalities. This Review begins with the fundamental characterization and evolutionary trajectory of DNA-based artificial structures, but concentrates on their biomedical applications. The coverage spans from controlled drug delivery to high therapeutic profile and accurate diagnosis. A variety of DNA-based materials, including aptamers, hydrogels, origamis, and tetrahedrons, are widely utilized in different biomedical fields. In addition, to achieve better performance and functionality, material hybridization is widely witnessed, and DNA nanostructure modification is also discussed. Although there are impressive advances and high expectations, the development of DNA-based structures/technologies is still hindered by several commonly recognized challenges, such as nuclease instability, lack of pharmacokinetics data, and relatively high synthesis cost.

Characterization of Aptamer BC 007 Substance and Product Using Circular Dichroism and Nuclear Magnetic Resonance Spectroscopy

Possible unwanted folding of biopharmaceuticals during manufacturing and storage has resulted in analysis schemes compared to small molecules that include bioanalytical characterization besides chemical characterization. Whether bioanalytical characterization is required for nucleotide-based drugs, may be decided on a case-by-case basis. Nucleotide-based pharmaceuticals, if chemically synthesized, occupy an intermediate position between small-molecule drugs and biologics. Here, we tested whether a physicochemical characterization of a nucleotide-based drug substance, BC 007, was adequate, using circular dichroism (CD) spectroscopy. Nuclear magnetic resonance confirmed CD data in one experimental setup. BC 007 forms a quadruplex structure under specific external conditions, which was characterized for its stability and structural appearance also after denaturation using CD and nuclear magnetic resonance. The amount of the free energy (ΔG⁰) involved in quadruplex formation of BC 007 was estimated at +8.7 kJ/mol when dissolved in water and +1.4 kJ/mol in 154 mM NaCl, indicating structural instability under these conditions. However, dissolution of the substance in 5 mM of KCl reduced the ΔG⁰ to -5.6 kJ/mol due to the stabilizing effect of cations. These results show that positive ΔG⁰ of quadruplex structure formation in water and aqueous NaCl prevents BC 007 from preforming stable 3-dimensional structures, which could potentially affect drug function.

Thermotropic Liquid Crystal-Assisted Chemical and Biological Sensors

In this review article, we analyze recent progress in the application of liquid crystal-assisted advanced functional materials for sensing biological and chemical analytes. Multiple research groups demonstrate substantial interest in liquid crystal (LC) sensing platforms, generating an increasing number of scientific articles. We review trends in implementing LC sensing techniques and identify common problems related to the stability and reliability of the sensing materials as well as to experimental set-ups. Finally, we suggest possible means of bridging scientific findings to viable and attractive LC sensor platforms.

Nucleobase-Guanidiniocarbonyl-Pyrrole Conjugates as Novel Fluorimetric Sensors for Single Stranded RNA

We demonstrate here for the first time that a guanidiniocarbonyl-pyrrole (GCP) unit can be applied for the fine recognition of single stranded RNA sequences—an intuitively unexpected result since so far binding of the GCP unit to ds-DNA or ds-RNA relied strongly on minor or major groove interactions, as shown in previous work. Two novel nucleobase–GCP isosteric conjugates differing in the flexibility of GCP unit revealed a fluorimetric recognition of various single stranded RNA, which could be additionally regulated by pH. The more rigid conjugate showed a specific fluorescence increase for poly A only at pH 7, whereby this response could be reversibly switched-off at pH 5. The more flexible derivative revealed selective fluorescence quenching by poly G at pH 7 but no change for poly A, whereas its recognition of poly AH⁺ can be switched-on at pH 5. The computational analysis confirmed the important role of the GCP fragment and its protonation states in the sensing of polynucleotides and revealed that it is affected by the intrinsic dynamical features of conjugates themselves. Both conjugates showed a negligible response to uracil and cytosine ss-RNA as well as ds-RNA at pH 7, and only weak interactions with ds-DNA. Thus, nucleobase–GCP conjugates can be considered as novel lead compounds for the design of ss-RNA or ss-DNA selective fluorimetric probes.

Tetrahedral DNA probe coupling with hybridization chain reaction for competitive thrombin aptasensor

A novel competitive aptasensor for thrombin detection is developed by using a tetrahedral DNA (T-DNA) probe and hybridization chain reaction (HCR) signal amplification. Sulfur and nitrogen co-doped reduced graphene oxide (SN-rGO) is firstly prepared by a simple reflux method and used for supporting substrate of biosensor. Then, T-DNA probe is modified on the electrode by Au-S bond and a competition is happened between target thrombin and the complementary DNA (cDNA) of aptamer. The aptamer binding to thrombin forms an aptamer-target conjugate and make the cDNA remained, and subsequently hybridizes with the vertical domain of T-DNA. Finally, the cDNAs trigger HCR, which results in a great current response by the catalysis of horseradish peroxidase to the hydrogen peroxide + hydroquinone system. For thrombin detection, the proposed biosensor shows a wide linearity range of 10^-13-10^-8M and a low detection limit of 11.6fM (S/N = 3), which is hopeful to apply in biotechnology and clinical diagnosis.

Multifunctional Nanotechnology-Enabled Sensors for Rapid Capture and Detection of Pathogens

Nanomaterial-based sensing approaches that incorporate different types of nanoparticles (NPs) and nanostructures in conjunction with natural or synthetic receptors as molecular recognition elements provide opportunities for the design of sensitive and selective assays for rapid detection of contaminants. This review summarizes recent advancements over the past ten years in the development of nanotechnology-enabled sensors and systems for capture and detection of pathogens. The most common types of nanostructures and NPs, their modification with receptor molecules and integration to produce viable sensing systems with biorecognition, amplification and signal readout are discussed. Examples of all-in-one systems that combine multifunctional properties for capture, separation, inactivation and detection are also provided. Current trends in the development of low-cost instrumentation for rapid assessment of food contamination are discussed as well as challenges for practical implementation and directions for future research.

Noncalssical multiscale modeling of ssDNA manipulation using a CNT-nanocarrier based on AFM

Nanocarriers are useful tools in biological and medical research fields. In nanomanipulation, a nondestructive and successful process can be achieved by using nanocarriers. In this paper, a nonclassical multiscale approach has been presented for modeling a single strand DNA (ssDNA) manipulation based on AFM. To achieve a nondestructive nanomanipulation process, carbon nanotube (CNT) has been used as a nanocarrier. AFM setup has been separated into a Micro field (MF) and a Nano field (NF). The governing equations of the MF have been derived based on Kirchhoff plate model and a modified couple stress theory. The NF has been modeled by molecular dynamics (MD) method. A set of nanomanipulations has been performed for the free ssDNA and the ssDNA inside the nanocarrier (shielded ssDNA) on three types of substrates. The exerted forces on the free ssDNA and the shielded ssDNA have been compared for manipulation on various substrates. The results show that using the nanocarrier reduces the manipulation force considerably. The results of RMSD as a general geometrical criterion have illustrated that the maximum damage occurs on the golden substrate for free ssDNA. Elongation and curvature criteria have been presented to investigate the ssDNA deformation in detail. The elongation and curvature criteria have been shown that using a nanocarrier is a good approach for a successful and nondestructive nanomanipulation. Finally it can be concluded that the manipulation process of free ssDNA on silicon substrate is successful as well as the manipulation process of the shielded ssDNA on all three types of substrates.