Single-site Pt-doped RuO2 hollow nanospheres with interstitial C for high-performance acidic overall water splitting

Customized reaction route for ruthenium oxide towards stabilized water oxidation in high-performance PEM electrolyzers

The poor stability of Ru-based acidic oxygen evolution (OER) electrocatalysts has greatly hampered their application in polymer electrolyte membrane electrolyzers (PEMWEs). Traditional understanding of performance degradation centered on influence of bias fails in describing the stability trend, calling for deep dive into the essential origin of inactivation. Here we uncover the decisive role of reaction route (including catalytic mechanism and intermediates binding strength) on operational stability of Ru-based catalysts. Using MRuO_x (M = Ce⁴⁺, Sn⁴⁺, Ru⁴⁺, Cr⁴⁺) solid solution as structure model, we find the reaction route, thereby stability, can be customized by controlling the Ru charge. The screened SnRuO_x thus exhibits orders of magnitude lifespan extension. A scalable PEMWE single cell using SnRuO_x anode conveys an ever-smallest degradation rate of 53 μV h^-1 during a 1300 h operation at 1 A cm^-2.

Co-Dissolved Isostructural Polyoxovanadates to Construct Single-Atom-Site Catalysts for Efficient CO2 Photoreduction

We explored a co-dissolved strategy to embed mono-dispersed Pt center into V₂ O₅ support via dissolving [PtV₉ O₂₈ ]^7- into [V₁₀ O₂₈ ]^6- aqueous solution. The uniform dispersion of [PtV₉ O₂₈ ]^7- in [V₁₀ O₂₈ ]^6- solution allows [PtV₉ O₂₈ ]^7- to be surrounded by [V₁₀ O₂₈ ]^6- clusters via a freeze-drying process. The V centers in both [PtV₉ O₂₈ ]^7- and [V₁₀ O₂₈ ]^6- were converted into V₂ O₅ via a calcination process to stabilize Pt center. These double separations can effectively prevent the Pt center agglomeration during the high-temperature conversion process, and achieve 100 % utilization of Pt in [PtV₉ O₂₈ ]^7- . The resulting Pt-V₂ O₅ single-atom-site catalysts exhibit a CH₄ yield of 247.6 μmol g^-1  h^-1 , 25 times higher than that of Pt nanoparticle on the V₂ O₅ support, which was accompanied by the lactic acid photooxidation to form pyruvic acid. Systematical investigations on this unambiguous structure demonstrate an important role of Pt-O atomic pair synergy for highly efficient CO₂ photoreduction.

Dynamic rhenium dopant boosts ruthenium oxide for durable oxygen evolution

Heteroatom-doping is a practical means to boost RuO₂ for acidic oxygen evolution reaction (OER). However, a major drawback is conventional dopants have static electron redistribution. Here, we report that Re dopants in Re_0.06Ru_0.94O₂ undergo a dynamic electron accepting-donating that adaptively boosts activity and stability, which is different from conventional dopants with static dopant electron redistribution. We show Re dopants during OER, (1) accept electrons at the on-site potential to activate Ru site, and (2) donate electrons back at large overpotential and prevent Ru dissolution. We confirm via in situ characterizations and first-principle computation that the dynamic electron-interaction between Re and Ru facilitates the adsorbate evolution mechanism and lowers adsorption energies for oxygen intermediates to boost activity and stability of Re_0.06Ru_0.94O₂. We demonstrate a high mass activity of 500 A g_cata.^-1 (7811 A g_Re-Ru^-1) and a high stability number of S-number = 4.0 × 10⁶ n_oxygen n_Ru^-1 to outperform most electrocatalysts. We conclude that dynamic dopants can be used to boost activity and stability of active sites and therefore guide the design of adaptive electrocatalysts for clean energy conversions.

CoP2/Co2P Encapsulated in Carbon Nanotube Arrays to Construct Self-Supported Electrodes for Overall Electrochemical Water Splitting

Electrocatalytic water splitting is a desirable and sustainable strategy for hydrogen production yet still faces challenges due to the sluggish kinetics and rapid deactivation of catalysts in the oxygen evolution process. Herein, we utilized the metal-catalyzed growth technology and phosphating process to fabricate self-supported electrodes (Co_xP_y@CNT-CC) composed of carbon nanotube (CNT) arrays grown on carbon cloth (CC); thereinto, cobalt-based phosphide nanoparticles (Co_xP_y) are uniformly encapsulated in the cavity of the CNTs. After further optimization, when the nanoparticles are in the composite phase (CoP₂/Co₂P), CoP₂/Co₂P@CNT-CC served as catalytic electrodes with the highest activity and stability for electrocatalytic water splitting in an alkaline medium (1.0 M KOH). The as-prepared CoP₂/Co₂P@CNT-CC integrates the advantages of the abundant active sites and confinement effect of CNTs, imparting promising electrocatalytic activities and stability in catalyzing both hydrogen evolution reaction and oxygen evolution reaction. Remarkably, electrocatalytic water splitting cells assembled using CoP₂/Co₂P@CNT-CC electrodes as the cathode and anode, respectively, require a cell voltage of 1.55 V at 10 mA cm^-2, which is lower than that of the commercially noble Pt/C/CC and RuO₂/CC catalyst couple (1.68 V). Besides, a CoP₂/Co₂P@CNT-CC||CoP₂/Co₂P@CNT-CC system shows outstanding durability for a period of 100 h at 10 mA cm^-2. This work may provide new ideas for designing bifunctional electrocatalysts for applications in electrocatalytic water splitting.

Oxygen Evolution Electrocatalysts for the Proton Exchange Membrane Electrolyzer: Challenges on Stability

Hydrogen generated by proton exchange membrane (PEM) electrolyzer holds a promising potential to complement the traditional energy structure and achieve the global target of carbon neutrality for its efficient, clean, and sustainable nature. The acidic oxygen evolution reaction (OER), owing to its sluggish kinetic process, remains a bottleneck that dominates the efficiency of overall water splitting. Over the past few decades, tremendous efforts have been devoted to exploring OER activity, whereas most show unsatisfying stability to meet the demand for industrial application of PEM electrolyzer. In this review, systematic considerations of the origin and strategies based on OER stability challenges are focused on. Intrinsic deactivation of the material and the extrinsic balance of plant-induced destabilization are summarized. Accordingly, rational strategies for catalyst design including doping and leaching, support effect, coordination effect, strain engineering, phase and facet engineering are discussed for their contribution to the promoted OER stability. Moreover, advanced in situ/operando characterization techniques are put forward to shed light on the OER pathways as well as the structural evolution of the OER catalyst, giving insight into the deactivation mechanisms. Finally, outlooks toward future efforts on the development of long-term and practical electrocatalysts for the PEM electrolyzer are provided.