3D printing of conch-like scaffolds for guiding cell migration and directional bone growth

Regeneration of severe bone defects remains an enormous challenge in clinic. Developing regenerative scaffolds to directionally guide bone growth is a potential strategy to overcome this hurdle. Conch, an interesting creature widely spreading in ocean, has tough spiral shell that can continuously grow along the spiral direction. Herein, inspired by the physiological features of conches, a conch-like (CL) scaffold based on β-TCP bioceramic material was successfully prepared for guiding directional bone growth via digital light processing (DLP)-based 3D printing. Benefiting from the spiral structure, the CL scaffolds significantly improved cell adhesion, proliferation and osteogenic differentiation in vitro compared to the conventional 3D scaffolds. Particularly, the spiral structure in the scaffolds could efficiently induce cells to migrate from the bottom to the top of the scaffolds, which was like “cells climbing stairs”. Furthermore, the capability of guiding directional bone growth for the CL scaffolds was demonstrated by a special half-embedded femoral defects model in rabbits. The new bone tissue could consecutively grow into the protruded part of the scaffolds along the spiral cavities. This work provides a promising strategy to construct biomimetic biomaterials for guiding directional bone tissue growth, which offers a new treatment concept for severe bone defects, and even limb regeneration.

•

A conch-like scaffold was firstly developed for guiding directional bone growth.

•

The CL scaffolds efficiently induced cells “climbing stairs”- like-migrating.

•

The CL scaffolds showed improved bioactivities benefited from the spiral structure.

•

This work provided a new treatment concept for severe bone defects.

In Situ Mineralizing Spinning of Strong and Tough Silk Fibers for Optical Waveguides

Biopolymer-based optical waveguides with low-loss light guiding performance and good biocompatibility are highly desired for applications in biomedical photonic devices. Herein, we report the preparation of silk optical fiber waveguides through bioinspired in situ mineralizing spinning, which possess excellent mechanical properties and low light loss. Natural silk fibroin was used as the main precursor for the wet spinning of the regenerated silk fibroin (RSF) fibers. Calcium carbonate nanocrystals (CaCO₃ NCs) were in situ grown in the RSF network and served as nucleation templates for mineralization during the spinning, leading to the formation of strong and tough fibers. CaCO₃ NCs can guide the structure transformation of silk fibroin from random coils to β-sheets, contributing to enhanced mechanical properties. The tensile strength and toughness of the obtained fibers are up to 0.83 ± 0.15 GPa and 181.98 ± 52.42 MJ·m^-3, obviously higher than those of natural silkworm silks and even comparable to spider silks. We further investigated the performance of the fibers as optical waveguides and observed a low light loss of 0.46 dB·cm^-1, which is much lower than natural silk fibers. We believed that these silk-based fibers with excellent mechanical and light propagation properties are promising for applications in biomedical light imaging and therapy.

Construction of Millimeter-Wide Monolayers of Ordered Nanocubes as a Stain of "Wineglass Tears" Driven by the Marangoni Flow

We constructed millimeter-wide monolayers consisting of tetragonally ordered BaTiO₃ (BT) nanocubes through the liquid film formation caused by the Marangoni flow in a toluene-hexane binary liquid containing oleic acid. A thin liquid film containing BT nanocubes was overspread on a standing silicon substrate through the condensation of toluene at the advancing front after the preferential evaporation of hexane. Then, the oscillatory droplet formation like "wineglass tears" occurred on the substrate. Finally, two-dimensionally ordered BT nanocubes were observed as a stain of "wineglass tears" on the substrate after the liquid film receded through evaporation. The presence of a thin liquid film in the binary system is essential for the production of millimeter-wide monolayers on the substrate because multilayer deposition occurs without the formation of a thin liquid film in monocomponent systems. We improved the regularity of the ordered arrays of nanocubes by adjusting the liquid component and evaporation conditions.

Scalable Manufacturing of Environmentally Stable All-Solid-State Plant Protein-Based Supercapacitors with Optimal Balance of Capacitive Performance and Mechanically Robust

The development of advanced biomaterial with mechanically robust and high energy density is critical for flexible electronics, such as batteries and supercapacitors. Plant proteins are ideal candidates for making flexible electronics due to their renewable and eco-friendly natures. However, due to the weak intermolecular interactions and abundant hydrophilic groups of protein chains, the mechanical properties of protein-based materials, especially in bulk materials, are largely constrained, which hinders their performance in practical applications. Here, a green and scalable method is shown for the fabrication of advanced film biomaterials with high mechanical strength (36.3 MPa), toughness (21.25 MJ m^-3 ), and extraordinary fatigue-resistance (213 000 times) by incorporating tailor-made core-double-shell structured nanoparticles. Subsequently, the film biomaterials combine to construct an ordered, dense bulk material by stacking-up and hot-pressing techniques. Surprisingly, the solid-state supercapacitor based on compacted bulk material shows an ultrahigh energy density of 25.8 Wh kg^-1 , which is much higher than those previously reported advanced materials. Notably, the bulk material also demonstrates long-term cycling stability, which can be maintained under ambient condition or immersed in H₂ SO₄ electrolyte for more than 120 days. Thus, this research improves the competitiveness of protein-based materials for real-world applications such as flexible electronics and solid-state supercapacitors.

Direct control of shell regeneration by the mantle tissue in the pearl oyster Pinctada fucata

Molluscs rapidly repair the damaged shells to prevent further injury, which is vital for their survival after physical or biological aggression. However, it remains unclear how this process is precisely controlled. In this study, we applied scanning electronic microscopy and histochemical analysis to examine the detailed shell regeneration process in the pearl oyster Pinctada fucata. It was found that the shell damage caused the mantle tissue to retract, which resulted in relocation of the partitioned mantle zones with respect to their correspondingly secreting shell layers. As a result, the relocated mantle tissue dramatically altered the shell morphology by initiating de novo precipitation of prismatic layers on the former nacreous layers, leading to the formation of sandwich-like "prism-nacre-prism-nacre" structure. Real-time PCR revealed the up-regulation of the shell matrix protein genes, which was confirmed by the thermal gravimetric analysis of the newly formed shell. The increased matrix secretion might have led to the change of CaCO₃ precipitation dynamics which altered the mineral morphology and promoted shell formation. Taken together, our study revealed the close relationship between the physiological activities of the mantle tissue and the morphological change of the regenerated shells.

Nanosilk Template-Guided/Induced Construction of Brush-/Flower-like 3D Nanostructures

Biomaterials with natural hierarchical structures typically exhibit extraordinary properties because of their multilevel structural designs. They offer many templates and models as well as inspiration for material design, particularly for fabricating structure-regulated, performance-enhanced, and function-enriched materials. Biopolymer-based nanocomposites with ingenious nanostructures constructed through ecofriendly and sustainable approaches are highly desirable to meet the multifunctional requirements of developing bioinspired materials. Herein, an all-silk fibroin-based nanocomposite with a brush-like nanostructure was constructed for the first time using a nanotemplate-guided assembly approach in which dissolved silk assembled directly on a silk nanowhisker (SNW) backbone to form peculiar nanobrushes based on the classical micelle model. Three-dimensional spider-like or centipede-like silk nanobrushes (SNBs) were fabricated by varying the SNW backbone length from 0.16 to 6 μm. The branches with average lengths of 32-290 nm were also adjustable. SNBs were further designed to regulate and induce biomineralization of hydroxyapatite (HAP) to form interesting flower-like nanostructures, in which the HAP nanosphere (diameters ∼16 nm) "core" was covered by SNBs with branches extending to form a "shell" (∼101 nm in length). Based on such protein nanotemplate-guided formation of nanoscale structures, practical hollow conduits with remarkable mechanical properties, biocompatibility, shape memory behavior, and bone engineering potential were fabricated. This study inspires the design of polymorphous biopolymer-based nanostructures with enhanced performance at multiple length scales where the weaknesses of individual building blocks are offset.

Chitosan as a Canvas for Studies of Macromolecular Controls on CaCO3 Biological Crystallization

A mechanistic understanding of how macromolecules, typically as an organic matrix, nucleate and grow crystals to produce functional biomineral structures remains elusive. Advances in structural biology indicate that polysaccharides (e.g., chitin) and negatively charged proteoglycans (due to carboxyl, sulfate, and phosphate groups) are ubiquitous in biocrystallization settings and play greater roles than currently recognized. This review highlights studies of CaCO₃ crystallization onto chitinous materials and demonstrates that a broader understanding of macromolecular controls on mineralization has not emerged. With recent advances in biopolymer chemistry, it is now possible to prepare chitosan-based hydrogels with tailored functional group compositions. By deploying these characterized compounds in hypothesis-based studies of nucleation rate, quantitative relationships between energy barrier to crystallization, macromolecule composition, and solvent structuring can be determined. This foundational knowledge will help researchers understand composition-structure-function controls on mineralization in living systems and tune the designs of new materials for advanced applications.

Organized mineralized cellulose nanostructures for biomedical applications

Cellulose is the most abundant naturally-occurring polymer, and possesses a one-dimensional (1D) anisotropic crystalline nanostructure with outstanding mechanical robustness, biocompatibility, renewability and rich surface chemistry in the form of nanocellulose in nature. Such features make cellulose an ideal bio-template for directing the bio-inspired mineralization of inorganic components into hierarchical nanostructures that are promising in biomedical applications. In this review, we will summarize the chemistry and nanostructure characteristics of cellulose and discuss how these favorable characteristics regulate the bio-inspired mineralization process for manufacturing the desired nanostructured bio-composites. We will focus on uncovering the design and manipulation principles of local chemical compositions/constituents and structural arrangement, distribution, dimensions, nanoconfinement and alignment of bio-inspired mineralization over multiple length-scales. In the end, we will underline how these cellulose biomineralized composites benefit biomedical applications. It is expected that this deep understanding of design and fabrication principles will enable construction of outstanding structural and functional cellulose/inorganic composites for more challenging biomedical applications.

Biomimetic mineralization based on self-assembling peptides

Biomimetic science has attracted great interest in the fields of chemistry, biology, materials science, and energy. Biomimetic mineralization is the process of synthesizing inorganic minerals under the control of organic molecules or biomolecules under mild conditions. Peptides are the motifs that constitute proteins, and can self-assemble into various hierarchical structures and show a high affinity for inorganic substances. Therefore, peptides can be used as building blocks for the synthesis of functional biomimetic materials. With the participation of peptides, the morphology, size, and composition of mineralized materials can be controlled precisely. Peptides not only provide well-defined templates for the nucleation and growth of inorganic nanomaterials but also have the potential to confer inorganic nanomaterials with high catalytic efficiency, selectivity, and biotherapeutic functions. In this review, we systematically summarize research progress in the formation mechanism, nanostructural manipulation, and applications of peptide-templated mineralized materials. These can further inspire researchers to design structurally complex and functionalized biomimetic materials with great promising applications.

Tough and Conductive Nacre-inspired MXene/Epoxy Layered Bulk Nanocomposites

A long-standing quest in materials science has been the development of tough epoxy resin nanocomposites for use in numerous applications. Inspired by nacre, here we report tough and conductive MXene/epoxy layered bulk nanocomposites. The orientation of MXene lamellar scaffolds is enhanced by annealing treatment. The improved interfacial interactions between MXene lamellar scaffold and epoxy through surface chemical modification resulted in a synergistic effect. Tailoring the interlayer spacing of MXene nanosheets to a critical distance resulted in a fracture toughness about eight times higher than that of pure epoxy, surpassing other epoxy nanocomposites. Our nacre-inspired MXene/epoxy layered bulk nanocomposites also show high electrical conductivity that provides self-monitoring capability for structural integrity and exhibits an excellent electromagnetic interference shielding efficiency. Our proposed strategy provides an avenue for fabricating high-performance epoxy nanocomposites.

A bio-inspired versatile free-standing membrane for oral cavity microenvironmental monitoring and remineralization to prevent dental caries

The fast monitoring of oral bacterial infection, bacterial clearance and repairing of enamel damage caused by dental caries relies on an effective way of monitoring, killing and repairing in situ, but presents a major challenge in oral healthcare. Herein, we developed a bio-inspired versatile free-standing membrane by filling TiO₂ nanotube arrays with β-sheet-rich silk fibroin and cleaving them from Ti foil, as inspired by nacre or enamel-like structures. The robust transparent membrane exhibited good mechanical properties, and could indicate acid-base microenvironment variation and the infection of S. mutans in a 5 min test by loading cyanidin cations in the membrane. Meanwhile, it can be used for photocatalysis and nanoreservoirs ascribed to TiO₂ nanotubes, to kill and remove 99% of S. mutans bacteria under interval UV irradiation with low-power density, and load functional peptide to induce the remineralization on the etched-enamel for long-term treatment, tested in vitro and in vivo. The mechanical property of repaired enamel is improved in comparison. This bio-inspired constructed membrane would be applied in the prevention and treatment of oral cavity related diseases, such as enamel demineralization and dental caries, etc.

Electric, magnetic, and shear field-directed assembly of inorganic nanoparticles

Ordered assemblies of inorganic nanoparticles (NPs) have shown tremendous potential for wide applications due to their unique collective properties, which differ from those of individual NPs. Various assembly methods, such as external field-directed assembly, interfacial assembly, template assembly, biomolecular recognition-mediated assembly, confined assembly, and others, have been employed to generate ordered inorganic NP assemblies with hierarchical structures. Among them, the external field-directed assembly method is particularly fascinating, as it can remotely assemble NPs into well-ordered superstructures. Moreover, external fields (e.g., electric, magnetic, and shear fields) can introduce a local and/or global field intensity gradient, resulting in an additional force on NPs to drive their rotation and/or translation. Therefore, the external field-directed assembly of NPs becomes a robust method to fabricate well-defined functional materials with the desired optical, electronic, and magnetic properties, which have various applications in catalysis, sensing, disease diagnosis, energy conversion/storage, photonics, nano-floating-gate memory, and others. In this review, the effects of an electric field, magnetic field, and shear field on the organization of inorganic NPs are highlighted. The methods for controlling the well-ordered organization of inorganic NPs at different scales and their advantages are reviewed. Finally, future challenges and perspectives in this field are discussed.

Tooth Diversity Underpins Future Biomimetic Replications

Although the evolution of tooth structure seems highly conserved, remarkable diversity exists among species due to different living environments and survival requirements. Along with the conservation, this diversity of evolution allows for the optimized structures and functions of teeth under various service conditions, providing valuable resources for the rational design of biomimetic materials. In this review, we survey the current knowledge about teeth from representative mammals and aquatic animals, including human teeth, herbivore and carnivore teeth, shark teeth, calcite teeth in sea urchins, magnetite teeth in chitons, and transparent teeth in dragonfish, to name a few. The highlight of tooth diversity in terms of compositions, structures, properties, and functions may stimulate further efforts in the synthesis of tooth-inspired materials with enhanced mechanical performance and broader property sets. The state-of-the-art syntheses of enamel mimetics and their properties are briefly covered. We envision that future development in this field will need to take the advantage of both conservation and diversity of teeth. Our own view on the opportunities and key challenges in this pathway is presented with a focus on the hierarchical and gradient structures, multifunctional design, and precise and scalable synthesis.

How a Facet of a Nanocrystal Is Formed: The Concept of the Symmetry Based Kinematic Theory

Conventional nanocrystal (NC) growth mechanisms have overwhelmingly focused on the final exposed facets to explain shape evolution. However, how the final facets are formed from the initial nuclei or seeds, has not been specifically interrogated. In this concept paper, we would like to concentrate on this specific topic, and introduce the symmetry based kinematic theory (SBKT) to explain the formation and evolution of crystal facets. It is a crystallographic theory based on the classical crystal growth concepts developed to illustrate the shape evolution during the NC growth. The most important principles connecting the basic NC growth processes and morphology evolution are the preferential growth directions and the properties of kinematic waves. On the contrary, the final facets are just indications of how the crystal growth terminates, and their formation and evolution rely on the NC growth processes: surface nucleation and layer advancement. Accordingly, the SBKT could even be applied to situations where non-faceted NCs such as spheres are formed.

Impact-Resistant Hydrogels by Harnessing 2D Hierarchical Structures

With the strengthening capacity through harnessing multi-length-scale structural hierarchy, synthetic hydrogels hold tremendous promise as a low-cost and abundant material for applications demanding unprecedented mechanical robustness. However, integrating high impact resistance and high water content, yet superior softness, in a single hydrogel material still remains a grand challenge. Here, a simple, yet effective, strategy involving bidirectional freeze-casting and compression-annealing is reported, leading to a hierarchically structured hydrogel material. Rational engineering of the distinct 2D lamellar structures, well-defined nanocrystalline domains and robust interfacial interaction among the lamellae, synergistically contributes to a record-high ballistic energy absorption capability (i.e., 2.1 kJ m^-1 ), without sacrificing their high water content (i.e., 85 wt%) and superior softness. Together with its low-cost and extraordinary energy dissipation capacity, the hydrogel materials present a durable alternative to conventional hydrogel materials for armor-like protection circumstances.

Hierarchically structured bioinspired nanocomposites

Next-generation structural materials are expected to be lightweight, high-strength and tough composites with embedded functionalities to sense, adapt, self-repair, morph and restore. This Review highlights recent developments and concepts in bioinspired nanocomposites, emphasizing tailoring of the architecture, interphases and confinement to achieve dynamic and synergetic responses. We highlight cornerstone examples from natural materials with unique mechanical property combinations based on relatively simple building blocks produced in aqueous environments under ambient conditions. A particular focus is on structural hierarchies across multiple length scales to achieve multifunctionality and robustness. We further discuss recent advances, trends and emerging opportunities for combining biological and synthetic components, state-of-the-art characterization and modelling approaches to assess the physical principles underlying nature-inspired design and mechanical responses at multiple length scales. These multidisciplinary approaches promote the synergetic enhancement of individual materials properties and an improved predictive and prescriptive design of the next era of structural materials at multilength scales for a wide range of applications.

A soil-inspired dynamically responsive chemical system for microbial modulation

Interactions between the microbiota and their colonized environments mediate critical pathways from biogeochemical cycles to homeostasis in human health. Here we report a soil-inspired chemical system that consists of nanostructured minerals, starch granules and liquid metals. Fabricated via a bottom-up synthesis, the soil-inspired chemical system can enable chemical redistribution and modulation of microbial communities. We characterize the composite, confirming its structural similarity to the soil, with three-dimensional X-ray fluorescence and ptychographic tomography and electron microscopy imaging. We also demonstrate that post-synthetic modifications formed by laser irradiation led to chemical heterogeneities from the atomic to the macroscopic level. The soil-inspired material possesses chemical, optical and mechanical responsiveness to yield write-erase functions in electrical performance. The composite can also enhance microbial culture/biofilm growth and biofuel production in vitro. Finally, we show that the soil-inspired system enriches gut bacteria diversity, rectifies tetracycline-induced gut microbiome dysbiosis and ameliorates dextran sulfate sodium-induced rodent colitis symptoms within in vivo rodent models.

Preparation, Properties, and Mechanism of Flame-Retardant Poly(vinyl alcohol) Aerogels Based on the Multi-Directional Freezing Method

In this work, exfoliated α-zirconium phosphate (α-ZrP) and phosphated cellulose (PCF) were employed to synthesize poly(vinyl alcohol) composite aerogels (PVA/PCF/α-ZrP) with excellent flame retardancy through the multi-directional freezing method. The peak heat release rate (PHRR), total smoke release (TSR), and CO production (COP) of the (PVA/PCF₁₀/α-ZrP₁₀-3) composite aerogel were considerably decreased by 42.3%, 41.4%, and 34.7%, as compared to the pure PVA aerogel, respectively. Simultaneously, the limiting oxygen index (LOI) value was improved from 18.1% to 28.4%. The mechanistic study of flame retardancy showed evidence that PCF and α-ZrP promoted the crosslinking and carbonization of PVA chains to form a barrier, which not only served as insulation between the material and the air, but also significantly reduced the emissions of combustible toxic gases (CO₂, CO). In addition, the multi-directional freezing method further improved the catalytic carbonization process. This mutually advantageous strategy offers a new strategy for the preparation of composite aerogels with enhanced fire resistance.

Anomalous inapplicability of nacre-like architectures as impact-resistant templates in a wide range of impact velocities

Nacre is generally regarded as tough body armor, but it was often smashed by predators with a certain striking speed. Nacre-like architectures have been demonstrated to dissipate abundant energy by tablets sliding at static or specific low-speed loads, but whether they're still impact-resistant templates in a wide range of impact velocities remains unclear. Here, we find an anomalous phenomenon that nacre-like structures show superior energy-dissipation ability only in a narrow range of low impact velocities, while they exhibit lower impact resistance than laminated structures when impact velocity exceeds a critical value. This is because the tablets sliding in nacre-like structure occurs earlier and wider at low impact velocities, while it becomes localized at excessive impact velocities. Such anomalous phenomenon remains under different structural sizes and boundary conditions. It further inspires us to propose a hybrid architecture design strategy that achieves optimal impact resistance in a wide range of impact velocities.

Bioinspired Chiral Template Guided Mineralization for Biophotonic Structural Materials

Nature provides numerous biomineral design inspirations for constructing structural materials with desired functionalities. However, large-scale production of damage-tolerant Bouligand structural materials with biologically comparable photonics remains a longstanding challenge. Here, an efficient and scalable artificial molting strategy, based on self-assembly of cellulose nanocrystals and subsequent mineralization of amorphous calcium carbonate, is developed to produce biomimetic materials with an exceptional combination of mechanical and photonic properties that are usually mutually exclusive in synthetic materials. These biomimetic composites exhibit tunable mechanics from "strong and flexible", which exceeds the benchmark of natural chiral materials, to "stiff and hard", which is comparable to natural and synthetic counterparts. Especially, the biomimetic composites possess ultrahigh stiffness of 2 GPa in their fully water-swollen state-a value well beyond hydrated crab exoskeleton, cartilage, tendon, and stiffest synthetic hydrogels, combined with exceptional strength and resilience. Additionally, these composites are distinguished by the tunable chiral structural color and water-triggered switchable photonics that are absent in most artificial mineralized materials, as well as unique hydroplastic properties. This study opens the door for a scalable synthesis of resilient biophotonic structural materials in practical bulk form.

Role of Inorganic Amorphous Constituents in Highly Mineralized Biomaterials and Their Imitations

A highly mineralized biomaterial is one kind of biomaterial that usually possesses a high content of crystal minerals and hierarchical microstructure, exhibiting excellent mechanical properties to support the living body. Recent studies have revealed the presence of inorganic amorphous constituents (IAC) either during the biomineralization process or in some mature bodies, which heavily affects the formation and performance of highly mineralized biomaterials. These results are surprising given the preceding intensive research into the microstructure design of these materials. Herein, we highlight the role of IAC in highly mineralized biomaterials. We focused on summarizing works demonstrating the presence or phase transformation of IAC and discussed in detail how IAC affects the formation and performance of highly mineralized biomaterials. Furthermore, we described some imitations of highly mineralized biomaterials that use IAC as the synthetic precursor or final strengthening phase. Finally, we briefly summarized the role of IAC in biomaterials and provided an outlook on the challenges and opportunities for future IAC and IAC-containing bioinspired materials researches.

Planar defect-free pure red perovskite light-emitting diodes via metastable phase crystallization

Solution-processable all-inorganic CsPbI_3-xBr_x perovskite holds great potential for pure red light-emitting diodes. However, the widely existing defects in this mixed halide perovskite markedly limit the efficiency and stability of present light-emitting diode devices. We here identify that intragrain Ruddlesden-Popper planar defects are primary forms of such defects in the CsPbI_3-xBr_x thin film owing to the lattice strain caused by inhomogeneous halogen ion distribution. To eliminate these defects, we develop a stepwise metastable phase crystallization strategy to minimize the CsPbI_3-xBr_x perovskite lattice strain, which brings planar defect-free CsPbI_3-xBr_x thin film with improved radiative recombination, narrowed emission band, and enhanced spectral stability. Using these high-quality thin films, we fabricate spectrally stable pure red perovskite light-emitting diodes, showing 17.8% external quantum efficiency and 9000 candela meter^-2 brightness with color coordinates required by Rec. 2020.

Fabrication of Multilayered Biofunctional Material with an Enamel-like Structure

The oral cavity is an environment with diverse bacteria; thus, antibacterial materials are crucial for treating and preventing dental diseases. There is a high demand for materials with an enamel-like architecture because of the high failure rate of dental restorations, due to the physical differences between dental materials and enamel. However, recreating the distinctive apatite composition and hierarchical architecture of enamel is challenging. The aim of this study was to synthesize a novel material with an enamel-like structure and antibacterial ability. We established a non-cell biomimetic method of evaporation-based bottom-up self-assembly combined with a layer-by-layer technique and introduced an antibacterial agent (graphene oxide) to fabricate a biofunctional material with an enamel-like architecture and antibacterial ability. Specifically, enamel-like graphene oxide-hydroxyapatite crystals, formed on a customized mineralization template, were assembled into an enamel-like prismatic structure with a highly organized orientation preferentially along the c-axis through evaporation-based bottom-up self-assembly. With the aid of layer-by-layer absorption, we then fabricated a bulk macroscopic multilayered biofunctional material with a hierarchical enamel-like architecture. This enamel-inspired biomaterial could effectively resolve the problem in dental restoration and brings new prospects for the synthesis of other enamel-inspired biomaterials.

CaCO3 Crystals with Unique Morphologies Controlled by the Hydrogen-Bonded Supramolecular Assemblies of Ureido-Pyrimidinone-Amino Acid Derivatives

Biomineral materials such as nacre of shells exhibit high mechanical strength and toughness on account of their unique "brick-mortar" multilayer structure. 2-Ureido-4[1H]-pyrimidinone (UPy) derivatives with different types of end groups, due to the self-complementary quadruple hydrogen bonds and abundant Ca²⁺ binding sites, can easily self-assemble into supramolecular aggregates and act as templates and skeleton in the process of inducing mineral crystallization. In this work, UPy derivatives were used as templates to induce the mineralization and growth of CaCO₃ through a CO₂ diffusion method. The morphology of CaCO₃ crystals was modulated and analyzed by adjusting the synthesizing parameters including Ca²⁺ concentration, pH, and end groups. The results showed that, by the regulatory role of the mineralization template, it was easier to realize the multilayer crystal structure at a lower concentration of Ca²⁺ (less than 0.01 mol L^-1). Under alkaline regulation, the quadruple hydrogen bonds would be destroyed, and the template's regulation effect on the morphology of CaCO₃ crystals would be weakened. Moreover, by comparing different types of end groups, it was proven that the UPy derivatives with carboxylic acid groups (-COOH) played a crucial role in the process of CaCO₃ crystallization with unique morphologies.

Intermediate Valence Ion-Mediated Electrodeposition Process

The assembly of biomolecules and ions (e.g., biomineralization process) generates many intricate structures in nature. However, human beings' control over the assembly processes of ions is in its infant stage compared with nature. Here, it is reported that the intermediate valence metal ions in the electrolyte can influence the growth speed of certain crystal facets and in turn adjust the shape of the electrodeposits created by anodic electrodeposition. This is because the intermediate valence metal ions (e.g., Pb²⁺ , Mn²⁺ , etc.) can be oxidized by the electrochemically oxidized high valence ions (e.g., Ag²⁺ and Ag³⁺ ). Therefore, the concentration of the electrochemically oxidized high valence ions can be controlled by the intermediate valence ions, affecting the growth kinetics of the electrodeposits. Taking the anodic electrodeposition of Ag₇ O₈ NO₃ as an example, the role of intermediate valence ions in tailoring the shape of the Ag₇ O₈ NO₃ electrodeposits is demonstrated. Moreover, the growth location of the second-order structure can be controlled by the intermediate valence metal ions. Additionally, the designed complex microarchitectures starting from certain crystal facets to form hollow nanoframes can be selectively etched. The control capability over the electrochemical assembly process of metal ions is significantly strengthened by introducing intermediate valence ions into the electrolyte.

Chloride-ion-directed synthesis of plate-like Cu2O mesocrystals for effective nitrogen fixation

Cuprous oxide (Cu₂O) mesocrystals, which are composed of numerous nanocrystals with a common crystallographic orientation, are supposed to possess superior photocatalytic abilities than the normal constructions, but very few of them have been reported to date. In this work, plate-like Cu₂O mesocrystals were successfully fabricated via a facile one-pot wet chemical strategy. Unlike the commonly used polymers or small molecules, chloride ions (Cl^-) were employed as structure-directing agents and played the main role in the Cu₂O mesocrystal formation. The formation mechanism was interpreted as follows: the presence of Cl^- inhibited the formation of CuO and Cu by forming the intermediate product CuCl, which was further hydrolyzed to Cu₂O nanocrystals. Cl^- tended to adsorb on the (111) facets of the formed Cu₂O nanocrystals and stabilize them. Then the Cu₂O nanocrystals were aligned side by side through the unabsorbed side faces, leading to mutual nanocrystals orientation and crystallographic lock-in, facilitating the formation of plate-like Cu₂O mesocrystals. The polymer, polyacrylamide (PAM), also promoted the mesocrystals formation by serving as a stabilizer and fixed the crystallographic orientation of the Cu₂O nanocrystals during their orderly stacking process. The plate-like Cu₂O mesocrystals showed a long decay time and pronounced performance toward the visible-light-driven photocatalytic reduction of N₂ into NH₃. This research may stimulate in-depth investigations into the exploration of new synthetic methods for the design and construction of novel mesocrystals.

Shape-morphing into 3D curved surfaces with nacre-like composite architectures

Inhomogeneous in-plane deformation of soft materials or cutting and folding of inextensible flat sheets enables shape-morphing from two dimensional (2D) to three-dimensional (3D), while the resulting structures often have weakened mechanical strength. Shells like nacre are known for the superior fracture toughness due to the "brick and mortar" composite layers, enabling stress redistribution and crack stopping. Here, we report an optimal and universal cutting and stacking strategy that transforms composite plies into 3D doubly curved shapes with nacre-like architectures. The multilayered laminate exhibits staggered cut distributions, while the interlaminar shear mitigates the cut-induced mechanical weakness. The experimentally consolidated hemispherical shells exhibit, on average, 37 and 69% increases of compression peak forces, versus those with random cut distributions, when compressed in different directions. Our approach opens a previously unidentified paradigm for shape-conforming arbitrarily curved surfaces while achieving high mechanical performance.

Gas-Sensitive Cellulosic Triboelectric Materials for Self-Powered Ammonia Sensing

Gas-sensitive materials are capable of dynamic identification and content monitoring of specific gases in the environment, and their applications in the field of gas sensing are promising. However, weak adsorption properties are the main challenge limiting the application of gas-sensitive materials. A highly adsorbent gas-sensitive cellulose nanofibril (CNF)-based triboelectric material with a layered structure is prepared here and it is applied to self-powered gas sensing. The layered structure of the triethoxy-1H,1H,2H,2H-tridecafluoro-n-octylsilane cellulose nanofiber (PFOTES-CNF)-based gas-sensitive material further enhances the adsorption of the material due to electrostatic adsorption in the electrostatic field induced by triboelectricity. It is found that the ammonia-sensitive material obtained by loading Ti3 C2 Tx in PFOTES-CNF has a fast response/recovery (12/14 s), high sensitivity response (Vair /Vgas  = 2.1), high selectivity response (37.6%), and low detection limit (10 ppm) for 100 ppm of ammonia gas. In addition, the ammonia-sensitive CNF-based triboelectric material can accurately identify NH3 concentration changes in the range of 10-120 ppm and transmit the signal wirelessly to the user interface, facilitating real-time online monitoring of NH3 in the environment. A novel strategy is provided here for designing and preparing high-performance gas-sensitive composites and the analysis of self-powered gas sensing is guided.

Graphene oxide bulk material reinforced by heterophase platelets with multiscale interface crosslinking

Graphene oxide (GO) and reduced GO possess robust mechanical, electrical and chemical properties. Their nanocomposites have been extensively explored for applications in diverse fields. However, due to the high flexibility and weak interlayer interactions of GO nanosheets, the flexural mechanical properties of GO-based composites, especially in bulk materials, are largely constrained, which hinders their performance in practical applications. Here, inspired by the amorphous/crystalline feature of the heterophase within nacreous platelets, we present a centimetre-sized, GO-based bulk material consisting of building blocks of GO and amorphous/crystalline leaf-like MnO₂ hexagon nanosheets adhered together with polymer-based crosslinkers. These building blocks are stacked and hot-pressed with further crosslinking between the layers to form a GO/MnO₂-based layered (GML) bulk material. The resultant GML bulk material exhibits a flexural strength of 231.2 MPa. Moreover, the material exhibits sufficient fracture toughness and strong impact resistance while being light in weight. Experimental and numerical analyses indicate that the ordered heterophase structure and synergetic crosslinking interactions across multiscale interfaces lead to the superior mechanical properties of the material. These results are expected to provide insights into the design of structural materials and potential applications of high-performance GO-based bulk materials in aerospace, biomedicine and electronics.

Rapid formation of uniformly layered materials by coupling reaction-diffusion processes with mechanical responsiveness

Straightforward manufacturing pathways toward large-scale, uniformly layered composites may enable the next generation of materials with advanced optical, thermal, and mechanical properties. Reaction-diffusion systems are attractive candidates to this aim, but while layered composites theoretically could spontaneously arise from reaction-diffusion, in practice randomly oriented patches separated by defects form, yielding nonuniformly patterned materials. A propagating reaction front can prevent such nonuniform patterning, as is the case for Liesegang processes, in which diffusion drives a reaction front to produce layered precipitation patterns. However, while diffusion is crucial to control patterning, it slows down transport of reactants to the front and results in a steady increase of the band spacing as the front advances. Here, we circumvent these diffusive limitations by embedding the Liesegang process in mechanically responsive hydrogels. The coupling between a moving reaction front and hydrogel contraction induces the formation of a self-regulated transport channel that ballistically carries reactants toward the area where patterning occurs. This ensures rapid and uniform patterning. Specifically, large-scale ([Formula: see text]5-cm) uniform banding patterns are produced with tunable band distance (d = 60 to 160 µm) of silver dichromate crystals inside responsive gelatin-alginate hydrogels. The generality and applicability of our mechanoreaction-diffusion strategy are demonstrated by forming patterns of precipitates in significantly smaller microscopic banding patterns (d = 10 to 30 µm) that act as self-organized diffraction gratings. By circumventing the inherent limitations of diffusion, our strategy unlocks the potential of reaction-diffusion processes for the manufacturing of uniformly layered materials.

Scalable Fabrication of High-Performance Bulk Nacre-Mimetic Materials on a Nanogrooved Surface

The extraordinary structural and mechanical features of nacre have been widely explored and translated into synthetic layered materials through various methods. However, it still remains challenging to achieve scale-up fabrication of these biomimetic layered materials, which is the main hurdle for their real applications. Herein, we report a facile, universal, and scalable strategy to produce bulk materials with nacre-mimetic architecture and performance. This was realized by the ordered nucleation of ice crystals on a nanogrooved surface. After the infiltration of a polymer, both the specific strength and toughness of our artificial nacre outperform those of natural nacre and other nacre-mimetic materials. Due to the scalability and availability of a nanogrooved surface, large-sized, bulk artificial nacre (30 × 20 × 5 cm) was also obtained through the directional freezing process. In addition, this efficient approach can also be extended to assemble various building blocks like functional nanomaterials such as graphene oxide and MXene nanosheets into bulk porous materials with highly ordered three-dimensional architecture, holding great potential for multifunctional applications.

Matrix-Directed Mineralization for Bulk Structural Materials

Mineral-based bulk structural materials (MBSMs) are known for their long history and extensive range of usage. The inherent brittleness of minerals poses a major problem to the performance of MBSMs. To overcome this problem, design principles have been extracted from natural biominerals, in which the extraordinary mechanical performance is achieved via the hierarchical organization of minerals and organics. Nevertheless, precise and efficient fabrication of MBSMs with bioinspired hierarchical structures under mild conditions has long been a big challenge. This Perspective provides a panoramic view of an emerging fabrication strategy, matrix-directed mineralization, which imitates the in vivo growth of some biominerals. The advantages of the strategy are revealed by comparatively analyzing the conventional fabrication techniques of artificial hierarchically structured MBSMs and the biomineral growth processes. By introducing recent advances, we demonstrate that this strategy can be used to fabricate artificial MBSMs with hierarchical structures. Particular attention is paid to the mass transport and the precursors that are involved in the mineralization process. We hope this Perspective can provide some inspiring viewpoints on the importance of biomimetic mineralization in material fabrication and thereby spur the biomimetic fabrication of high-performance MBSMs.

Mechanically robust bamboo node and its hierarchically fibrous structural design

Although short bamboo nodes function in mechanical support and fluid exchange for bamboo survival, their structures are not fully understood compared to unidirectional fibrous internodes. Here, we identify the spatial heterostructure of the bamboo node via multiscale imaging strategies and investigate its mechanical properties by multimodal mechanical tests. We find three kinds of hierarchical fiber reinforcement schemes that originate from the bamboo node, including spatially tightened interlocking, triaxial interconnected scaffolding and isotropic intertwining. These reinforcement schemes, built on porous vascular bundles, microfibers and more-refined twist-aligned nanofibers, govern the structural stability of the bamboo via hierarchical toughening. In addition, the spatial liquid transport associated with these multiscale fibers within the bamboo node is experimentally verified, which gives perceptible evidence for life-indispensable multidirectional fluid exchange. The functional integration of mechanical reinforcement and liquid transport reflects the fact that the bamboo node has opted for elaborate structural optimization rather than ingredient richness. This study will advance our understanding of biological materials and provide insight into the design of fiber-reinforced structures and biomass utilization.

Bamboo-Inspired Renewable, Lightweight, and Vibration-Damping Laminated Structural Materials for the Floor of a Railroad Car

It is important for the floor of railroad cars to be fitted with vibration- and noise-reducing, fire-resistant, and durable materials. In this study, inspired by a delicate and ordered bamboo gradient structure and excellent multilevel interfaces, we fabricated a laminated composite with characteristics similar to those of the bamboo structure using a simple and effective "top-down" method by laminating fast-growing wood, waste rubber, and bamboo charcoal plastic sheets made of bamboo processing residues. This composite material combines the unique advantages of a laminated structure design and composite interface bionics. The low density (0.73 g/cm³) of the laminated composite results in a specific modulus of 13.03 GPa cm³/g, a vibration damping ratio of 6.61%, and an impact toughness of 14.16 J/cm², which is significantly higher than that of other wood-based composites used for high-speed rail floors, such as Birch plywood (BP). In addition, we also investigated the laminated composite bonding property, fire resistance, and fatigue performance. This biomimetic bamboo-wood composite material has great potential for application in fitting the floor of eco-friendly railway cars.

Nanoengineering and green chemistry-oriented strategies toward nanocelluloses for protein sensing

As one of the most important functional organic macromolecules of life, proteins not only participate in the cell metabolism and gene regulation, they also earnestly protect the body's immunity system, leading to a powerful biological shield and homeostasis. Advances in nanomaterials are boosting the significant progress in various applications, including the sensing and examination of proteins in trace amount. Nanocellulose-oriented protein sensing is at the forefront of this revolution. The inherent feature of high biocompatibility, low cytotoxicity, high specific area, good durability and marketability endow nanocellulose with great superiority in protein sensing. Here, we highlight the recent progress of protein sensing using nanocellulose as the biosensor in trace amount. Besides, various kinds of construction strategies for nanocelluloses-based biosensors are discussed in detail, to enhance the agility and accuracy of clinical/medical diagnostics. Finally, several challenges in the approbatory identification of new approaches for the marketization of biomedical sensing that need further expedition in the future are highlighted.

Calcium carbonate: controlled synthesis, surface functionalization, and nanostructured materials

Calcium carbonate (CaCO₃) is an important inorganic mineral in biological and geological systems. Traditionally, it is widely used in plastics, papermaking, ink, building materials, textiles, cosmetics, and food. Over the last decade, there has been rapid development in the controlled synthesis and surface modification of CaCO₃, the stabilization of amorphous CaCO₃ (ACC), and CaCO₃-based nanostructured materials. In this review, the controlled synthesis of CaCO₃ is first examined, including Ca²⁺-CO₃^2- systems, solid-liquid-gas carbonation, water-in-oil reverse emulsions, and biomineralization. Advancing insights into the nucleation and crystallization of CaCO₃ have led to the development of efficient routes towards the controlled synthesis of CaCO₃ with specific sizes, morphologies, and polymorphs. Recently-developed surface modification methods of CaCO₃ include organic and inorganic modifications, as well as intensified surface reactions. The resultant CaCO₃ can then be further engineered via template-induced biomineralization and layer-by-layer assembly into porous, hollow, or core-shell organic-inorganic nanocomposites. The introduction of CaCO₃ into nanostructured materials has led to a significant improvement in the mechanical, optical, magnetic, and catalytic properties of such materials, with the resultant CaCO₃-based nanostructured materials showing great potential for use in biomaterials and biomedicine, environmental remediation, and energy production and storage. The influences that the preparation conditions and additives have on ACC preparation and stabilization are also discussed. Studies indicate that ACC can be used to construct environmentally-friendly hybrid films, supramolecular hydrogels, and drug vehicles. Finally, the existing challenges and future directions of the controlled synthesis and functionalization of CaCO₃ and its expanding applications are highlighted.

Bioinspired Laminated Bioceramics with High Toughness for Bone Tissue Engineering

For the research of biomaterials in bone tissue engineering, it is still a challenge to fabricate bioceramics that overcome brittleness while maintaining the great biological performance. Here, inspired by the toughness of natural materials with hierarchical laminated structure, we presented a directional assembly-sintering approach to fabricate laminated MXene/calcium silicate-based (L-M/CS) bioceramics. Benefiting from the orderly laminated structure, the L-M/CS bioceramics exhibited significantly enhanced toughness (2.23 MPa·m^1/2) and high flexural strength (145 MPa), which were close to the mechanical properties of cortical bone. Furthermore, the L-M/CS bioceramics possessed more suitable degradability than traditional CaSiO₃ bioceramics due to the newly formed CaTiSiO₅ after sintering. Moreover, the L-M/CS bioceramics showed good biocompatibility and could stimulate the expression of osteogenesis-related genes. The mechanism of promoting osteogenic differentiation had been shown to be related to the Wnt signaling pathway. This work not only fabricated calcium silicate-based bioceramics with excellent mechanical and biological properties for bone tissue engineering but also provided a strategy for the combination of bionics and bioceramics.

Nacre-inspired underwater superoleophobic films with high transparency and mechanical robustness

Underwater superoleophobic materials have attracted increasing attention because of their remarkable potential applications, especially antifouling, self-cleaning and oil-water separation. A limitation of most superoleophobic materials is that they are non-transparent and have limited mechanical stability underwater. Here, we report a protocol for preparing a transparent and robust superoleophobic film that can be used underwater. It is formed by a hydrogel layer prepared by the superspreading of chitosan solution on a superhydrophilic substrate and biomimetic mineralization of this layer. In contrast to conventional hydrogel-based materials, this film exhibits significantly improved mechanical properties because of the combination of high-energy, ordered, inorganic aragonite (one crystalline polymorph of calcium carbonate) and homogeneous external hierarchical micro/nano structures, leading to robust underwater superoleophobicity and ultralow oil adhesion. Moreover, the mineralized film is suitable for neutral and alkaline environments and for containing organic solvent underwater and can be coated on different transparent materials, which has promising applications in underwater optics, miniature reactors and microfluidic devices. In this protocol, the time for the whole biomimetic mineralization process is only ~6 h, which is significantly shorter than that of traditional methods, such as gas diffusion and the Kitano method. The protocol can be completed in ~2 weeks and is suitable for researchers with intermediate expertise in organic chemistry and inorganic chemistry.

Interfacial Mechanical Behavior in Nacre of Red Abalone and Other Shells: A Review

Interfaces between nacreous tablets are crucial to the outstanding mechanical properties of nacre in natural shells. Excellent research has been conducted to probe the effect of interfaces on strength and toughness of nacre, providing critical guidelines for the design of human-made laminated composites. This article reviews recent studies on interfacial mechanical behavior of nacre in red abalone and other shells, including experimental methods, analytical and numerical modeling. The discussions focus on the mechanical properties of dry and hydrated nacreous microstructures. The review concludes with discussions on representative studies of nacre-like composites with interfaces tuned using multiple approaches, and provides an outlook on improving the performance of composites with better interfacial controls.

A nanoconcrete welding strategy for constructing high-performance wound dressing

Engineering biomaterials to meet specific biomedical applications raises high requirements of mechanical performances, and simultaneous strengthening and toughening of polymer are frequently necessary but very challenging in many cases. In this work, we propose a new concept of nanoconcrete welding polymer chains, where mesoporous CaCO₃ (mCaCO₃) nanoconcretes which are composed of amorphous and nanocrystalline phases are developed to powerfully weld polymer chains through siphoning-induced occlusion, hydration-driven crystallization and dehydration-driven compression of nanoconcretes. The mCaCO₃ nanoconcrete welding technology is verified to be able to remarkably augment strength, toughness and anti-fatigue performances of a model polymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-based porous membrane. Mechanistically, we have revealed polymer-occluded nanocrystal structure and welding-derived microstress which is much stronger than interfacial Van der Waals force, thus efficiently preventing the generation of microcracks and repairing initial microcracks by microcracks-induced hydration, crystallization and polymer welding of mCaCO₃ nanoconcretes. Constructed porous membrane is used as wound dressing, exhibiting a special nanoplates-constructed surface topography as well as a porous structure with plentiful oriented, aligned and opened pore channels, improved hydrophilicity, water vapor permeability, anti-bacterial and cell adherence, in support of wound healing and skin structural/functional repairing. The proposed nanoconcrete-welding-polymer strategy breaks a new pathway for improving the mechanical performances of polymers.

•

An innovative nanoconcrete welding technology is developed for improving the mechanical performances of composite.

•

A new kind of mesoporous CaCO₃ nanoconcretes is synthesized by an ion etching method.

•

High-performance artificial skin is constructed based on a porous CaCO₃-PHBV membrane.

Mechanically Reinforced Artificial Enamel by Mg2+-Induced Amorphous Intergranular Phases

Amorphous intergranular phases in mature natural tooth enamel are found to provide better adhesion and could dramatically affect their mechanical performance as a structure reinforcing phase. This study successfully synthesized an amorphous intergranular phase enhanced fluorapatite array controlled by Mg²⁺ (FAP-M) at room temperature. Furthermore, atom probe tomography (APT) observation presents that Mg²⁺ is enriched at grain boundaries during the assembly of enamel-like fluorapatite arrays, leading to the formation of intergranular phases of Mg-rich amorphous calcium phosphate (Mg-ACP). APT results also demonstrated that the segregation of Mg²⁺ caused the chemical gradient in nanocrystalline attachment and realignment under the drive of inherent surface stress. These results indicate that the amorphous intergranular phases served like glue to connect each nanorod to reinforce the enamel-like arrays. Therefore, the as-received FAP-M artificial enamel exhibits excellent mechanical properties, with hardness and Young's modulus of 2.90 ± 0.13 GPa and 67.9 ± 3.4 GPa, which were ∼8.3 and 2.2 times higher than those of FAP arrays without controlled by Mg²⁺, respectively.

Reinforcing hydrogels with in situ formed amorphous CaCO3

Hydrogels are often employed for tissue engineering and moistening applications. However, they are rarely used for load-bearing purposes because of their limited stiffness and the stiffness-toughness compromise inherent to them. By contrast, nature uses hydrogel-based materials as scaffolds for load-bearing and protecting materials by mineralizing them. Inspired by nature, the stiffness or toughness of synthetic hydrogels has been increased by forming minerals, such as CaCO₃, within them. However, the degree of hydrogel reinforcement achieved with CaCO₃ remains limited. To address this limitation, we form CaCO₃ biominerals in situ within a model hydrogel, poly(acrylamide) (PAM), and systematically investigate the influence of the size, structure, and morphology of the reinforcing CaCO₃ on the mechanical properties of the resulting hydrogels. We demonstrate that especially the structure of CaCO₃ and its affinity to the hydrogel matrix strongly influence the mechanical properties of mineralized hydrogels. For example, while the fracture energy of PAM hydrogels is increased 3-fold if reinforced with individual micro-sized CaCO₃ crystals, it increases by a factor of 13 if reinforced with a percolating amorphous calcium carbonate (ACC) nano-structure that forms in the presence of a sufficient quantity of Mg²⁺. If PAM is further functionalized with acrylic acid (AA) that possesses a high affinity towards ACC, the stiffness of the hydrogel increases by a factor 50. These fundamental insights on the structure-mechanical property relationship of hydrogels that have been functionalized with in situ formed minerals has the potential to enable tuning the mechanical properties of mineralized hydrogels over a much wider range than what is currently possible.

Bioinspired Nanoheterogeneous Alternating Multiarched Architecture: Toward a Superior Strength-Toughness Integration

Strength and toughness are at odds with each other in coating design. Constructing strength-toughness-integrated coatings has long been a pursuit in materials design but is a challenge to achieve. Conventional wisdom suggests that growth of coatings is only a uniform cumulative growth on a two-dimensional plane. However, by constructing growth templates and controlling the alternation of heterogeneous materials, it subverts the traditional perception of cumulative growth in planes and creates the fact that the coating grows on a curved surface. Regulating the microstructure of the coating autonomously and matching the strength and toughness of heterogeneous materials, drawing inspiration from the multiarched structure in the nacre of red abalone, are crucial for achieving strength-toughness integration. Herein, we propose a new idea of coating deposition to achieve strength-toughness integration via preconstructing a nanoscale island-like discontinuous seed layer as a template for coating growth and then growing a nanoscale hard/soft heterogeneous multiarched architecture in situ. We refer to this architecture with intrinsic mechanical advantage as the "Nanoheterogeneous Alternating Multiarched" (NHAM) architecture. We design a nacre-like multiarched coating with a strength of 12.42 GPa and a K_IC value of 2.12 MPa·m^1/2, depositing the hard phase (TiSiCN layer) and the soft phase (Ag layer) with the unique NHAM architecture via physical vapor deposition technology, which exhibits a superior improvement in the strength-toughness integration compared to that reported in other studies (increased strength by at least 1 GPa without sacrificing toughness). The NHAM architecture strategy provides a pathway to design strength-toughness-integrated coatings. Two heterogeneous materials with well-matched strength and toughness can be deposited to achieve the NHAM architecture to greatly reflect the effect of strength-toughness integration.

Freeze-derived heterogeneous structural color films

Structural colors have a demonstrated value in constructing various functional materials. Efforts in this area are devoted to developing stratagem for generating heterogeneous structurally colored materials with new architectures and functions. Here, inspired by icing process in nature and ice-templating technologies, we present freeze-derived heterogeneous structural color hydrogels with multiscale structural and functional features. We find that the space-occupying effect of ice crystals is helpful for tuning the distance of non-close-packed colloidal crystal nanoparticles, resulting in corresponding reflection wavelength shifts in the icing area. Thus, by effectively controlling the growth of ice crystals and photo-polymerizing them, structural color hydrogels with the desired structures and morphologies can be customized. Other than traditional monochromatic structure color hydrogels, the resultant hydrogels can be imparted with heterogeneous structured multi-compartment body and multi-color with designed patterns through varying the freezing area design. Based on these features, we have also explored the potential value of these heterotypic structural color hydrogels for information encryptions and decryptions by creating spatiotemporally controlled icing areas. We believe that these inverse ice-template structural color hydrogels will offer new routes for the construction and modulation of next generation smart materials with desired complex architectures.

DCSr-NL: A Novel Method to Semiquantitatively Probe the Growth Rate of Nacre

Matrix proteins play critical roles in regulating the prismatic and nacreous layer formation in the shell. However, due to the dearth of in vivo experiments, their specific roles during shell formation are still unclear. In this study, a new method to detect the content of Sr in the nacreous layer (DCSr-NL), which can semiquantitatively measure the nacreous growth rate, has been proposed. In vitro experiments show that during in vitro crystallization, the Sr element can replace Ca partially, resulting in isomorphism. In vivo experiments show that the best labeling conditions are when the Sr/Ca in seawater is 0.3, at 24 °C, and at 4 days of culture. Although a surface morphological difference in the inner layer of nacre is seldom detected by scanning electron microscopy (SEM), knockdown of the classical gene nacrein or unknown gene NU9, combined with DCSr-NL, shows that both significantly decrease the nacreous layer formation rate. The knockdown of the classical gene Pif177 or unknown genes NU3 or MRPN affects the surface morphology and decreases the nacreous layer formation rate. In general, thanks to DCSr-NL, we can efficiently analyze the growth rate of the nacre with or without morphological changes by SEM, and it is of considerable significance for exploring the target gene's function in forming the nacre in vivo.