Use of high-intensity ultrasound to improve emulsifying properties of chicken myofibrillar protein and enhance the rheological properties and stability of the emulsion

Effect of Oudemansiella raphanipies Powder on Physicochemical and Textural Properties, Water Distribution and Protein Conformation of Lower-Fat Pork Meat Batter

The effects of the addition of different amounts (0%, 1%, 2%, 3% and 4%) of Oudemansiella raphanipies powder (ORP) to lower-fat pork batter on its physicochemical, textural and rheological properties, water distribution and protein conformation were evaluated. The results showed that the addition of ORP from 0% to 4% significantly decreased the pH and L* value of pork batter (p < 0.05); however, it also increased the a* value and enhanced the cooking yield of pork batter from 77% to 92%. Pork batter with 1−2% ORP added had an improved texture profile and a higher storage modulus (G’), but the addition of 3−4% ORP resulted in an inferior texture of pork batter and G’. LF-NMR showed that the addition of ORP significantly increased the peak area ratio of immobile water and reduced the peak area ratio of free water (p < 0.05). ORP significantly affected protein secondary structure of pork batter. The α-helix content of pork batter with 1−2% ORP decreased and β-sheet content increased. Overall, the addition level of 1−2% ORP effectively improved the texture and water holding capacity of lower-fat emulsified sausage and provides a new reference for developing nutritional meat products.

Effects of ethanol pre-treated whey protein isolates on the physical stability and protein-lipid co-oxidation in oil-in-water emulsions

The changes of physical stability and protein-lipid co-oxidation of oil-in-water (O/W) emulsions which stabilized by whey protein isolates (WPI) and ethanol pre-treated WPI (EWPI) under different homogenization methods were investigated. Compared with WPI, EWPI could obviously enhance the O/W emulsion's stability due to smaller particle size and higher level of adsorbed proteins. Moreover, protein-lipid co-oxidation was observed in both WPI and EWPI stabilized O/W emulsions and controlled by the characteristics of the adsorbed proteins. EWPI protect themselves from attacked of lipid oxidation products more effectively than WPI, showing lower N'-formyl-l-kynurenine or carbonyl contents and degree of aggregation, as well as higher fluorescence intensity. Furthermore, high-pressure homogenization induced higher levels of adsorbed proteins in O/W emulsions than ultrasound homogenization, resulting in a higher degree of protein oxidation and lower degree of lipid oxidation. Therefore, EWPI can be applied as an efficient emulsifier in emulsion foods with higher physical and oxidative stabilities.

Effects of selenium yeast and jujube powder dietary supplements on conformational and functional properties of post-mortem chicken myofibrillar protein

The aim of the study was to evaluate the effects of selenium yeast and jujube powder on the structure and functional properties of post-mortem myofibrillar protein (MP) in white feather broilers. Changes in the structure (surface hydrophobicity, secondary structure, and tertiary structure), functional properties (solubility, turbidity, emulsifying, and foaming characteristics), and gel properties (gel strength, springiness, and water-holding capacity) of the MPs of white feather broiler, which were fed with different concentrations of selenium yeast or/and jujube powder (selenium yeast: 0,0.3, and 0.6 mg/kg; jujube powder: 8% to replace corn) for 42 days, were determined at 0, 24, and 72 h post-mortem. The results showed that with increasing concentrations of selenium yeast and jujube powder in the diet, the α-helix content, solubility, emulsification, and foaming of post-mortem chicken MP increased significantly (P < 0.05). The gel strength, springiness, and water-holding capacity of MP also increased, but the differences between the treatment groups were not significant (P > 0.05). In addition, the β-folding content and turbidity of MP decreased significantly (P < 0.05). Both the increase in selenium yeast levels and the addition of jujube powder improved the structural integrity and functional properties of MP. The best improvement effect was found in the combination group of high-dose selenium yeast and jujube powder, and there were significant interactions between them in the indices of α-helix, β-folding, turbidity, emulsification, and foam stability of MP. In conclusion, supplementing diets with seleniumyeast and jujube powder could maintain the structural stability of MPs in post-mortem chicken breast, leading to good functional properties. The results of this study may provide new insights into the effects of pre-slaughter feeding on post-mortem muscle MP conformation control and quality improvement.

Physicochemical properties and microstructure of composite surimi gels: The effects of ultrasonic treatment and olive oil concentration

This study was conducted to evaluate the effects of extra virgin olive (EVO) oil incorporation on the physicochemical properties and microstructure of surimi gels subjected to ultrasound-assisted water-bath heating. As the oil content was increased from 0 to 5 g/100 g, the breaking force and gel strength of the surimi gels significantly decreased, while the whiteness level exhibited the opposite tendency irrespective of the heating method. Compared with the traditional water-bath heating method, the ultrasonic heating promoted the unfolding of the α-helix structure and intensified the formation of β-sheet content and non-covalent bonds (ionic bonds, hydrogen bonds, and disulfide bonds), especially disulfide bonds, which contributed to the further crosslinking of the proteins and to gelation, thereby improving the gels' strength. In addition, smaller cavities and compact microstructures were observed in the low-oil (≤3 g/100 g) surimi gels under ultrasonic treatment, which effectively prevented water migration in the gel network and resulted in a high water holding capacity and uniform water distribution. However, the ultrasonic treatment barely remedied the poor microstructures of the high-oil (>3 g/100 g) surimi gels owing to oil coalescence, which weakened the protein-protein interaction. In conclusion, ultrasonic treatment combined with water-bath heating significantly improved the gelation properties of the low-oil surimi gels, although it did not remarkably improve those of the high-oil gels. The choice of a suitable oil concentration could be of great importance for the production and functioning of surimi products via ultrasound-assisted treatments.

Effects of proteins on emulsion stability: The role of proteins at the oil-water interface

To obtain a stable protein-added emulsion system, researchers have focused on the design of the oil-water interface. This review discussed the updated details of protein adsorption behavior at the oil-water interface. We evaluated methods of monitoring interfacial proteins as well as their strengths and limitations. Based on the effects of structure on protein adsorption, we summarized the contribution of pre-changing methods to adsorption. In addition, the interaction of proteins and other surface-active molecules at the interface had been emphasized. Results showed that protein adsorption is affected by conformation, oil polarity and aqueous environments. The monitoring of interfacial proteins through spectroscopic properties in actual emulsion systems is an emerging trend. Pre-changing could improve the protein adsorption and the purpose of pre-changing of proteins is similar. In the interaction with other surface-active molecules, co-adsorption is desirable. By co-adsorption, the respective advantages can be exploited to obtain a more stable emulsion system.

Glycyrrhetinic acid nanoparticles combined with ferrotherapy for improved cancer immunotherapy

Programmed cell death protein 1 (PD-1)/Programmed Cell Death Ligand 1 (PD-L1) blockade immunotherapy has emerged as a promising strategy to treat both solid and hematological malignancies. Despite the considerable therapeutic effects obtained in pre-clinical and clinical studies, PD-1/PD-L1 blockade therapy is still limited by the low benefit rates and a large number of patients still do not respond to this treatment. In this study, we developed a highly efficient and cancer-specific immunogenic cell death nanoinducer for effective tumor immunotherapy. A leukocyte membrane coated poly (lactic-co-glycolic acid) encapsulating glycyrrhetinic acid (GCMNPs) was developed to enhance targeting, tumor-homing capacity, and reduce toxicity in vivo. GCMNPs could induce ferroptosis in acute myeloid leukemia and colorectal cancer cells by downregulating glutathione-dependent peroxidases 4, leading to increased lipid peroxidation levels. Moreover, GCMNPs and ferumoxytol could synergistically enhance Fe-dependent cytotoxicity through the Fenton reaction. Finally, in vivo studies showed that GCMNPs synergized with ferumoxytol and anti-PD-L1 synergistically improve T-cell immune response against leukemia and colorectal tumor. This study anticipated that the combination of glycyrrhetinic acid-based nanomaterials and ferrotherapy would provide further insights into anti-cancer immune response to PD-1/PD-L1 blockade for both solid and hematological malignancies. STATEMENT OF SIGNIFICANCE: Despite the considerable therapeutic effects obtained in pre-clinical and clinical studies, PD-1/PD-L1 blockade therapy is still limited by the low benefit rates and a large number of patients still do not respond to this treatment. We designed a glycyrrhetinic acid-based nanoplatform as a new ICD inducer (GCMNPs), with high cancer cell specificity and reduced toxicity to AML and CRC. GCMNPs cooperates with ferumoxytol to promote a Fenton reaction and induce ferroptosis. Moreover, the combination of GCMNPs and ferumoxytol enhanced the blockage of PD-1/PD-L1 to activate T cells, subsequently generating a systemic immune response in CRC and AML mouse models. This pre-clinical findings provide the proof-of-concept of combination of glycyrrhetinic acid-based nanomaterials and ferrotherapy as an "ICD nano-inducer" and immunotherapeutic agent for treating cancer.

Characterization of cooked meat models using grasshopper (Sphenarium purpurascens) soluble protein extracted by alkalisation and ultrasound as meat-extender

The most abundant Orthoptera in Mexico is a small grasshopper (Sphenarium purpurascens) which is considered a food source with increased nutritional value due to its high protein content. Insect proteins have gained relevance because of their high potential as gelling, texturing, and extender agents in the food industry. The objective of this study was to evaluate the effect of substituting meat with a soluble protein extract from grasshopper obtained by alkalisation or alkalisation-piezoelectric ultrasound, on the techno-functional, physicochemical, and sensory characteristics of cooked meat models (sausages). The soluble protein was extracted in NaHCO₃ pH 8 and a piezoelectric ultrasound 5-mm sonotrode at 20 kHz with 99% amplitude. Different formulations with meat substitution: 0%, 5%, 10%, and 15% were prepared and characterised for their rheological behaviour, emulsion stability, weight loss by cooking, total protein content, colour, and texture. Sensory evaluation was conducted with consumers using a test involving check-all-that-apply and overall liking. The alkalisation-piezoelectric ultrasound method improved the solubility and the techno-functional properties of the soluble grasshopper protein when applied in sausages at maximum levels of 10% meat substitution. The sensory evaluation indicated that the formulation with 5% meat substitution exhibited the same acceptability as the control sample. Given these results, the soluble protein treated with alkalisation and piezoelectric ultrasound could be used as an extender in meat products.

Changes in Myosin from Silver Carp (Hypophthalmichthys molitrix) under Microwave-Assisted Water Bath Heating on a Multiscale

To further prove the advantages of microwave-assisted water bath heating (MWH) in low-value fish processing, the effects of different heating methods (two heating stage method, high temperature section respectively using MWH1, MWH2, MWH3, WH—water heating, MH—microwave heating) on secondary and tertiary myosin structures, SDS-PAGE, surface morphology, scanning electron microscopy (SEM), and particle size distribution were compared and analyzed. The findings revealed that MH and MWH aided in the production of gel formations by promoting myosin aggregation. Myosin from silver carps demonstrated enhanced sulfhydryl group and surface hydrophobicity after MWH treatment, as well as a dense network structure. The distribution of micropores becomes more uniform when the microwave time is increased. Actually, the total effect of microwave time on myosin is not substantially different. The correlation between particle size distribution and protein aggregation was also studied, in terms of time savings, the MWH of short microwave action is preferable since it not only promotes myosin aggregation but also avoids the drawbacks of a rapid warming rate. These discoveries give a theoretical foundation for understanding silver carp myosin under microwave modification, which is critical in the food industry.

Recent advances in modified food proteins by high intensity ultrasound for enhancing functionality: Potential mechanisms, combination with other methods, equipment innovations and future directions

High intensity ultrasound (HIU) is an efficient and green technology that has recently received enormous research attention for modification of food proteins. However, there are still several knowledge gaps in the possible mechanisms, synergistic effects of HIU with other strategies and improvement of HIU equipment that contribute to its application in the food industry. This review focuses on the recent research progress on the effects and potential mechanisms of HIU on the structure (including secondary and tertiary structure) and functionality (including solubility, emulsibility, foamability, and gelability) of proteins. Furthermore, the combination methods and innovations of HIU equipment for proteins modification in recent years are also detailed. Meanwhile, the possible future trends of food proteins modification by HIU are also considered and proposed.

Effects of ultrasound-assisted salt (NaCl) extraction method on the structural and functional properties of Oleosin

²We propose a new ultrasound-assisted salt (NaCl) Oleosin extraction method, where the addition of NaCl induces the dissociation of Oleosin subunits and promotes the unfolding of the protein spatial structure. The yield of Oleosin post extraction and purification and solubility of Oleosin obtained using the proposed method were higher than those of Oleosin extracted using traditional methods, by 17.6% and 122.9%, respectively; reduction in particle size (to 52 nm) was also noted. Hydrogen bond dissociation, increase in surface hydrophobicity, and disulfide bond formation occurred simultaneously. However, the overall structure of Oleosin was not negatively affected. The physical properties of Oleosin, such as water and oil absorption, emulsification, and antioxidant activity, were improved, and the rate of Oleosin digestion decreased during the in vitro simulated digestion process. The proposed method provides a theoretical basis for producing proteins. This method can be utilized for effective extraction of Oleosin to achieve sustained release of the produced proteins.

Impact of different ionic strengths on protein-lipid co-oxidation in whey protein isolate-stabilized oil-in-water emulsions

Protein-lipid co-oxidation of whey protein isolate (WPI)-stabilized oil-in-water (O/W) emulsions with different ionic strengths (0, 100, 200, 300 and 400 mM) during storage were investigated. The results proved that changes in levels of adsorbed proteins induced by different ionic strengths could obviously affect the occurrence of protein-lipid co-oxidation. The level of oxidative stress was higher in adsorbed proteins extracted from control sample than in those extracted from emulsions with 300 or 400 mM ionic strengths. This was indicated by higher levels of N'-formyl-l-kynurenine (NFK) and carbonyl, lower fluorescence intensity and more serious unfolding of protein structure. Moreover, control sample showed the highest oxidative stability, which was indicated by lower levels of primary and secondary lipid oxidation products. These findings clearly illustrated that altered levels of adsorbed proteins induced by different ionic strengths play a crucial role in affecting protein-lipid co-oxidation in O/W emulsions.

Rheological and Physicochemical Properties of Oleogel with Esterified Rice Flour and Its Suitability as a Fat Replacer

The objectives of this study were to produce oleogel using esterified rice flour with citric acid (ERCA), to evaluate physicochemical and rheological properties of oleogels, and to investigate their suitability as a fat replacer. Rice flour was esterified with citric acid (30%, w/w) to produce ERCA. Emulsions and oleogels were prepared with different concentrations (0, 5, 10, and 15%, w/w) of ERCA. In the steady shear rheological analysis, it was found that the values of apparent viscosity (ηa, 100) and consistency index (K) of emulsions were significantly increased by increasing the concentrations of ERCA. Oleogels were prepared with different concentrations (0, 5, 10, and 15%, w/w) of ERCA. All oleogels showed a hydrophobic carbonyl bond in the Fourier transform infrared (FT-IR) spectra. The peaks on new hydrogen bonds and amorphous regions, which did not appear in oleogel prepared with 0% ERCA, were observed at 3300–3400 cm−1 and 1018 cm−1, respectively, in oleogels prepared with ERCA. With the increase in ERCA concentrations in oleogels, oil loss values were significantly decreased. In a time-dependent test, it was found that all oleogels exhibited thixotropic properties. The frequency sweep test revealed that storage modulus (G′), loss modulus (G″), and complex viscosity (η*) values of oleogels were elevated with an increase in the concentration of ERCA. Oleogels prepared with 15% ERCA exhibited the lowest peroxide, p-Anisidine, and Total Oxidation(TOTOX) values. The addition of oleogels to cookies did not considerably affect appearance. However, it increased the content of unsaturated fatty acid. These results indicate that oleogels prepared with ERCA can be used as a fat replacer in food industry.

Comparison of oil-in-water emulsions prepared by ultrasound, high-pressure homogenization and high-speed homogenization

This study was designed to compare the properties of myofibrillar protein (MP) stabilized soybean oil-in-water emulsions fabricated by ultrasound-assisted emulsification (UAE), high-pressure homogenization (HPH) and high-speed homogenization (HSH). The emulsion properties, droplet characteristics, interfacial proteins, protein exposure extent, microrheological properties, multiple light scattering results, and 7 d storage stabilities of the three emulsions were specifically investigated. Our results indicate that UAE and HPH were better emulsification methods than HSH to obtain high-quality emulsions with higher emulsifying activity index (UAE 20.73 m²·g^-1, HPH 11.76 m²·g^-1 and HSH 6.80 m²·g^-1), whiteness (UAE 81.05, HPH 80.67 and HSH 74.09), viscosity coefficient (UAE 0.44 Pa·sⁿ, HPH 0.49 Pa·sⁿ and HSH 0.22 Pa·sⁿ), macroscopic viscosity index (UAE 2.31 nm^-2·s, HPH 0.38 nm^-2·s and HSH 0.34 nm^-2·s), and storage stability, especially for the UAE. Furthermore, UAE was a more efficient emulsification method than HPH to prepare the fine MP-soybean oil emulsion. The protein-coated oil droplets were observed in the three emulsions. The emulsion droplet size of the UAE-fabricated emulsion was the lowest (0.15 μm) while the interfacial protein concentration (93.37%) and the protein exposure extent were the highest among the three emulsions. During the 7 d storage, no separation was observed for the UAE-fabricated emulsion, while the emulsions fabricated by HPH and HSH were separated after storage for 5 d and 2 h. Therefore, this work suggests that UAE could be a better method than HPH and HSH to fabricate MP-soybean oil emulsion.

Effects of ultrasound pretreatment on the quality, nutrients and volatile compounds of dry-cured yak meat

The objective of the present study was to assess the effects of ultrasound pretreatment on the quality of dry-cured yak meat. The ultrasonic power with 0, 200, 300 and 400 W (ultrasonic frequency of 20 kHz) were used to assist processing of dry-cured yak meat. The meat quality, nutrient substances, sensory quality, electronic nose, electronic tongue and volatile compounds of dry-cured yak meat were determined. The results indicated that the moisture content and hardness value of ultrasonic treatment group was significantly lower compared to the control group (P < 0.05). Ultrasonic treatment increased the value of b*, and decreased the value of L*, a*, pH, chewiness, melting temperature and enthalpy. Springiness value significantly increased from control group to 300 W of ultrasonic power group. Shear force significantly decreased with the increase of ultrasonic power (P < 0.05). Ultrasonic treatment had no effect on the TVB-N content, but it could increase the TBARS content. Ultrasonic treatment could significantly increase the essential FAA (EFAA) and total FAA (P < 0.05). In addition, the saturated fatty acid (SFA) content significantly increased with the increase of ultrasonic power (P < 0.05). Ultrasound treatment negatively affected the meat's color, smell, and taste but increased its tenderness and the overall acceptability. It also significantly increased alcohols and aldehydes contents (P < 0.05), which were consistent with the measurement of electronic nose and electronic tongue. The results demonstrated that the the appropriate ultrasonic power assisted in the processing improves quality of dry-cured yak meat, particularly for the power of 300 W.

Mechanisms of Change in Emulsifying Capacity Induced by Protein Denaturation and Aggregation in Quick-Frozen Pork Patties with Different Fat Levels and Freeze-Thaw Cycles

Herein, we discuss changes in the emulsifying properties of myofibrillar protein (MP) because of protein denaturation and aggregation from quick-frozen pork patties with multiple fat levels and freeze-thaw (F-T) cycles. Protein denaturation and aggregation were confirmed by the significantly increased surface hydrophobicity, turbidity, and particle size, as well as the significantly decreased solubility and absolute zeta potential, of MPs with increases in fat levels and F-T cycles (p < 0.05). After multiple F-T cycles, the emulsifying activity and emulsion stability indices of all samples were significantly reduced (p < 0.05). The emulsion droplets of MP increased in size, and their distributions were dense and irregular. The results demonstrated that protein denaturation and aggregation due to multiple F-T cycles and fat levels changed the distribution of surface chemical groups and particle sizes of protein, thus affecting the emulsifying properties.

Regulation mechanism of myofibrillar protein emulsification mode by adding psyllium (Plantago ovata) husk

Psyllium husk (PH) is an excellent source of dietary fiber with strong water-absorption and viscosity. This work systemically investigated the regulation mechanism of myofibrillar protein (MP) emulsification mode by adding psyllium husk as composite emulsifiers to prepare O/W emulsions. The results showed that the physical stability of emulsions was improved by adding PH (0.1%-0.8%). The results of contact angle, interfacial tension and confocal laser scanning microscopy (CLSM) indicated that the stability mechanism of emulsions was affected by the addition of PH. At a low PH addition (0.1%), the adsorption of MP at the oil-water interface was enhanced, thus forming an elastic interfacial film that improves the stability of emulsions. However, when the PH addition increased to 0.8%, excess addition of pH even hindered the interfacial adsorption of MP. Notably, the pseudoplasticity and viscosity of emulsions increased due to the addition of PH, thus inhibiting the migration and aggregation of droplets.

Characteristics of Pickering emulsions stabilized by tea water-insoluble protein nanoparticles at different pH values

This study aimed to explore the characteristics of Pickering emulsions stabilized by tea water-insoluble protein nanoparticles (TWIPNs) at different pH values. The characteristics of TWIPNs at different pH values were analysed first. The average hydrodynamic diameter of TWIPNs in the suspension was smaller than 400 nm at pH 7-11. TWIPNs at pH 3 could not be used to stabilize Pickering emulsions. The flocculation index (FI) of fresh TWIPN-stabilized Pickering emulsions (TWIPNPEs) at pH 5 was higher than those of TWIPNPEs at pH 7-11 (FI < 5%), indicating that bridging flocculation led to the aggregation of small emulsion droplets. The zeta potential of TWIPNPEs at pH 7-11 did not change after 7 d. In addition, the TWIPNPEs showed gel-like properties under neutral and alkaline conditions. These results will be helpful for broadening the application of TWIPNPEs at different pH values.