Rational design of phase inversion membranes by tailoring thermodynamics and kinetics of casting solution using polymer additives

Effect of supporting membrane on removal of cadmium by the hybrid liquid membrane process

A hybrid liquid membrane process was used to remove cadmium cation from a solution using bis-(2-ethylhexyl) phosphoric acid as the carrier for the first time. Different polyethersulphone supporting membranes were prepared by a phase inversion technique. The prepared membrane could be efficiently used as the supporting membranes for the proposed process. The effects of porosity and pore size of the supporting membrane on removal efficiency were investigated. In addition, the effects of various operating parameters such as carrier concentration in organic phase, pH of feed phase, acid concentration, and temperature on the performance of the process were also investigated. It was found that the maximum flux of cadmium is obtained using the supporting membrane with 84.5% porosity and the pore size of 132 nm. The optimum carrier concentration is 0.2 M, the optimum pH of the feed phase is 6, and the optimum concentration of acid in the stripping phase is 0.6 M.

Characterization and antifouling properties of polyethylene glycol doped PAN–CAP blend membrane

The effects of polyethylene glycol (PEG) as an additive to a cellulose acetate phthalate–polyacrylonitrile blend membrane in the ultrafiltration range were investigated.

Tailoring PES nanofiltration membranes through systematic investigations of prominent design, fabrication and operational parameters

Design and fabrication of nanofiltration (NF) membranes with the desired characteristics and separation performance is of paramount importance.

Preparation, characterization and antifouling properties of polyacrylonitrile/polyurethane blend membranes for water purification

70% PAN and 30% PU blend membrane shows the maximum antifowling characteristics during filtration of turbed surface water.