Molecular Insight in Structure and Activity of Highly Efficient, Low-Ir Ir–Ni Oxide Catalysts for Electrochemical Water Splitting (OER)

Coordination engineering of iridium nanocluster bifunctional electrocatalyst for highly efficient and pH-universal overall water splitting

Water electrolysis offers a promising energy conversion and storage technology for mitigating the global energy and environmental crisis, but there still lack highly efficient and pH-universal electrocatalysts to boost the sluggish kinetics for both cathodic hydrogen evolution reaction (HER) and anodic oxygen evolution reaction (OER). Herein, we report uniformly dispersed iridium nanoclusters embedded on nitrogen and sulfur co-doped graphene as an efficient and robust electrocatalyst for both HER and OER at all pH conditions, reaching a current density of 10 mA cm-2 with only 300, 190 and 220 mV overpotential for overall water splitting in neutral, acidic and alkaline electrolyte, respectively. Based on probing experiments, operando X-ray absorption spectroscopy and theoretical calculations, we attribute the high catalytic activities to the optimum bindings to hydrogen (for HER) and oxygenated intermediate species (for OER) derived from the tunable and favorable electronic state of the iridium sites coordinated with both nitrogen and sulfur.

Lanthanides Regulated the Amorphization-Crystallization of IrO2 for Outstanding OER Performance

Research has been focused on regulating the amorphous surface of Ir-based materials to achieve a higher oxygen evolution reaction (OER) activity. The IrO_x amorphous layer is generally considered to be substantial enough to break the limitation created by the conventional adsorbate evolution mechanism (AEM) in acidic media. In this work, we used lanthanides to regulate IrO_x amorphization-crystallization through inhibiting the crystallization of iridium atoms in the calcination process. The chosen route created abundant crystalline-amorphous (c-a) interfaces, which greatly enhanced the charge transfer kinetics and the stability of the materials. The mass activity of iridium in the synthesized IrO₂@LuIr_1-nO_x(OH)_y structure reached 128.3 A/g_Ir, which is 14.6-fold that of the benchmark IrO₂. All the IrO₂@LnIr_1-nO_x(OH)_y (Ln = La-Lu) structures reflected 290-300 mV of overpotential at 10 mA/cm_geo². We demonstrate that a highly active c-a interface possesses an efficient charge transfer capability and is conducive to the stability of the activated oxygen species. The surface-activated oxygen species and the tensile strain [IrO₆] octahedron regulated by lanthanides are synergistically beneficial for increasing the intrinsic OER activity. Our research findings introduce c-a interface generation by the regulation of lanthanides as a new method for the rational design of robust OER catalysts.

Boosting Lattice Oxygen Oxidation of Perovskite to Efficiently Catalyze Oxygen Evolution Reaction by FeOOH Decoration

In the process of oxygen evolution reaction (OER) on perovskite, it is of great significance to accelerate the hindered lattice oxygen oxidation process to promote the slow kinetics of water oxidation. In this paper, a facile surface modification strategy of nanometer-scale iron oxyhydroxide (FeOOH) clusters depositing on the surface of LaNiO₃ (LNO) perovskite is reported, and it can obviously promote hydroxyl adsorption and weaken Ni-O bond of LNO. The above relevant evidences are well demonstrated by the experimental results and DFT calculations. The excellent hydroxyl adsorption ability of FeOOH-LaNiO₃ (Fe-LNO) can obviously optimize OH⁻ filling barriers to promote lattice oxygen-participated OER (LOER), and the weakened Ni-O bond of LNO perovskite can obviously reduce the reaction barrier of the lattice oxygen participation mechanism (LOM). Based on the above synergistic catalysis effect, the Fe-LNO catalyst exhibits a maximum factor of 5 catalytic activity increases for OER relative to the pristine perovskite and demonstrates the fast reaction kinetics (low Tafel slope of 42 mV dec⁻¹) and superior intrinsic activity (TOFs of ~40 O₂ S⁻¹ at 1.60 V vs. RHE).

Iridium-Doped Nanosized Zn-Al Layered Double Hydroxides as Efficient Water Oxidation Catalysts

Layered double hydroxides (LDHs) are an ideal platform to host catalytic metal centers for water oxidation (WO) owing to the high accessibility of water to the interlayer region, which makes all centers potentially reachable and activated. Herein, we report the syntheses of three iridium-doped zinc-aluminum LDHs (Ir-LDHs) nanomaterials (1-3, with about 80 nm of planar size and a thickness of 8 nm as derived by field emission scanning electron microscopy and powder X-ray diffraction studies, respectively), carried out in the confined aqueous environment of reverse micelles, through a very simple and versatile procedure. These materials exhibit excellent catalytic performances in WO driven by NaIO4 at neutral pH and 25 °C, with an iridium content as low as 0.5 mol % (∼0.8 wt %), leading to quantitative oxygen yields (based on utilized NaIO4, turnover number up to ∼10,000). Nanomaterials 1-3 display the highest ever reported turnover frequency values (up to 402 min-1) for any heterogeneous and heterogenized catalyst, comparable only to those of the most efficient molecular iridium catalysts, tested under similar reaction conditions. The boost in activity can be traced to the increased surface area and pore volume (>5 times and 1 order of magnitude, respectively, higher than those of micrometric materials of size 0.3-1 μm) estimated for the nanosized particles, which guarantee higher noble metal accessibility. X-ray absorption spectroscopy (XAS) studies suggest that 1-3 nanomaterials, as-prepared and after catalysis, contain a mixture of isolated, single octahedral Ir(III) sites, with no evidence of Ir-Ir scattering from second-nearest neighbors, excluding the presence of IrO2 nanoparticles. The combination of the results obtained from XAS, elemental analysis, and ionic chromatography strongly suggests that iridium is embedded in the brucite-like structure of LDHs, having four hydroxyls and two chlorides as first neighbors. These results demonstrate that nanometric LDHs can be successfully exploited to engineer efficient WOCs, minimizing the amount of iridium used, consistent with the principle of the noble-metal atom economy.

Electroactivation-induced IrNi nanoparticles under different pH conditions for neutral water oxidation

Electrochemical oxidation processes can affect the electronic structure and activate the catalytic performance of precious-metal and transition-metal based catalysts for the oxygen evolution reaction (OER). Also there are emerging requirements to develop OER electrocatalysts under various pH conditions in order to couple with different reduction reactions. Herein, we studied the effect of pH on the electroactivation of IrNi alloy nanoparticles supported on carbon (IrNi/C) and evaluated the electrocatalytic activities of the activated IrNiO_x/C for water oxidation under neutral conditions. In addition, their electronic structures and atomic arrangement were analyzed by in situ/operando X-ray absorption spectroscopy (XAS) and identical location transmission electron microscopy techniques, showing the reconstruction of the metal elements during electroactivation due to their different stabilities depending on the electrolyte pH. IrNiO_x/C activated under neutral pH conditions showed a mildly oxidized thin IrO_x shell. Meanwhile, IrNiO_x/C activated in acidic and alkaline electrolytes showed Ni-leached IrO_x and Ni-rich IrNiO_x surfaces, respectively. Particularly, the surface of IrNiO_x/C activated under alkaline conditions shows IrO_x with a high d-band hole and NiO_x with a high oxidation state leading to excellent OER catalytic activity in neutral media (η = 384 mV at 10 mA cm^-2) whereas much lower OER activity was reported under alkaline or acid conditions. Our results, which showed that electrochemically activated catalysts under different pH conditions exhibit a unique electronic structure by modifying the initial alloy catalyst, can be applied for the design of catalysts suitable for various electrochemical reactions.

Fundamental understanding of the acidic oxygen evolution reaction: mechanism study and state-of-the-art catalysts

The oxygen evolution reaction (OER), as the anodic reaction of water electrolysis (WE), suffers greatly from low reaction kinetics and thereby hampers the large-scale application of WE. Seeking active, stable, and cost-effective OER catalysts in acidic media is therefore of great significance. In this perspective, studying the reaction mechanism and exploiting advanced anode catalysts are of equal importance, where the former provides guidance for material structural engineering towards a better catalytic activity. In this review, we first summarize the currently proposed OER catalytic mechanisms, i.e., the adsorbate evolution mechanism (AEM) and lattice oxygen evolution reaction (LOER). Subsequently, we critically review several acidic OER electrocatalysts reported recently, with focus on structure-performance correlation. Finally, a few suggestions on exploring future OER catalysts are proposed.

Rational Design of an Iridium-Tungsten Composite with an Iridium-Rich Surface for Acidic Water Oxidation

Developing highly active and stable water oxidation catalysts with reduced cost in acidic media plays a critical role in clean energy technologies such as fuel cells and electrolyzers. Precious iridium-based oxides are still the only oxygen evolution reaction (OER) catalysts with reasonable activity and stability in acid. Herein, we design iridium-tungsten composites with a metallic tungsten-rich core and an iridium-rich surface by the sol-gel method followed by hydrogen reduction. The thus obtained iridium-tungsten catalyst shows much higher intrinsic water oxidation activity (100 mA/mg_Ir at an overpotential of 290 mV) and stability (100 h at 10 mA/cm²_geom) together with reduced iridium content (33 wt % only) as compared with pure iridium oxide. An operando method using H₂O₂ as a probe molecule is developed to determine the relative adsorption strength of the reaction intermediates (*OH and *OOH) in the OER process. Detailed characterization shows that the tungsten-incorporated surface not only modulates the adsorption energy of oxygen intermediates on iridium but also enhances the stability of iridium species in acid, while the metallic tungsten core exhibits high electrical conductivity, all of which collectively give rise to the much enhanced catalytic performance of iridium-tungsten composite in acidic water oxidation. A single-membrane electrode assembly is further prepared to demonstrate the advantages and potential application of iridium-tungsten composite in practical proton exchange membrane electrolyzers.

Transition metal based heterogeneous electrocatalysts for the oxygen evolution reaction at near-neutral pH

The oxygen evolution reaction (OER) is considered as a major bottleneck of water splitting for hydrogen generation. It is highly desired to develop high performance OER catalysts in near-neutral operating environments because of mild corrosion and pollution. This review summarized the recent development of heterogeneous catalysts containing transition metals (TM) for the OER at near-neutral pH. Specifically, we focus on some effective strategies to achieve a high OER performance for TM (e.g., Co, Mn, Ni, Cu, Fe, and binary TM)-based catalysts in near-neutral media. The progress and perspectives are discussed, which might provide some insights into the rapid promotion of the electrocatalytic performance for future applications in hydrogen production.

Bottom-up Design of Bimetallic Cobalt-Molybdenum Carbides/Oxides for Overall Water Splitting

Earth-abundant transition-metal-based catalysts for electrochemical water splitting are critical for sustainable energy schemes. In this work, we use a rational design method for the synthesis of ultrasmall and highly dispersed bimetallic CoMo carbide/oxide particles deposited on graphene oxide. Thermal conversion of the molecular precursors [H3 PMo12 O40 ], Co(OAc)2 ⋅4 H2 O and melamine in the presence of graphene oxide gives the mixed carbide/oxide (Co6 Mo6 C2 /Co2 Mo3 O8 ) nanoparticle composite deposited on highly dispersed, N,P-doped carbon. The resulting composite shows outstanding electrocatalytic water-splitting activity for both the oxygen evolution and hydrogen evolution reaction, and superior performance to reference samples including commercial 20 % Pt/C & IrO2 . Electrochemical and other materials analyses indicate that Co6 Mo6 C2 is the main active phase in the composite, and the N,P-doping of the carbon matrix increases the catalytic activity. The facile design could in principle be extended to multiple bimetallic catalyst classes by tuning of the molecular metal oxide precursor.

Connected iridium nanoparticle catalysts coated onto silica with high density for oxygen evolution in polymer electrolyte water electrolysis

We propose connected Ir nanoparticle catalysts (Ir/SiO2) by coating 1.8 nm Ir particles with high density onto silica for the oxygen evolution reaction. Nanoparticles form electron-conducting networks, which can eliminate the need for an electron-conducting support. Ir/SiO2 showed a high electrochemical surface area, mass activity, and water electrolysis performance.

Single-Atom Catalysts for Electrochemical Hydrogen Evolution Reaction: Recent Advances and Future Perspectives

Hydrogen, a renewable and outstanding energy carrier with zero carbon dioxide emission, is regarded as the best alternative to fossil fuels. The most preferred route to large-scale production of hydrogen is by water electrolysis from the intermittent sources (e.g., wind, solar, hydro, and tidal energy). However, the efficiency of water electrolysis is very much dependent on the activity of electrocatalysts. Thus, designing high-effective, stable, and cheap materials for hydrogen evolution reaction (HER) could have a substantial impact on renewable energy technologies. Recently, single-atom catalysts (SACs) have emerged as a new frontier in catalysis science, because SACs have maximum atom-utilization efficiency and excellent catalytic reaction activity. Various synthesis methods and analytical techniques have been adopted to prepare and characterize these SACs. In this review, we discuss recent progress on SACs synthesis, characterization methods, and their catalytic applications. Particularly, we highlight their unique electrochemical characteristics toward HER. Finally, the current key challenges in SACs for HER are pointed out and some potential directions are proposed as well.

Recent advances in ternary layered double hydroxide electrocatalysts for the oxygen evolution reaction

The recent advances in ternary layered double hydroxide electrocatalysts, including the strategies used for the design, synthesis, and evaluation of their performance for oxygen evolution reaction are reviewed in this account.

Amorphization activated ruthenium-tellurium nanorods for efficient water splitting

Pursuing active and durable water splitting electrocatalysts is of vital significance for solving the sluggish kinetics of the oxygen evolution reaction (OER) process in energy supply. Herein, theoretical calculations identify that the local distortion-strain effect in amorphous RuTe₂ system abnormally sensitizes the Te-pπ coupling capability and enhances the electron-transfer of Ru-sites, in which the excellent inter-orbital p-d transfers determine strong electronic activities for boosting OER performance. Thus, a robust electrocatalyst based on amorphous RuTe₂ porous nanorods (PNRs) is successfully fabricated. In the acidic water splitting, a-RuTe₂ PNRs exhibit a superior performance, which only require a cell voltage of 1.52 V to reach a current density of 10 mA cm⁻². Detailed investigations show that the high density of defects combine with oxygen atoms to form RuO_xH_y species, which are conducive to the OER. This work offers valuable insights for constructing robust electrocatalysts based on theoretical calculations guided by rational design and amorphous materials.

Elctrochemical water splitting is of vital significance for energy conversion and storage. Here the authors show an electrocatalyst based on amorphous ruthenium-tellurium porous nanorods which exhibit significantly improved OER performance than its crystalline counterparts

Mixed-Metal-Cluster Strategy for Boosting Electrocatalytic Oxygen Evolution Reaction of Robust Metal-Organic Frameworks

Rational construction of mixed metal-organic frameworks (MOFs) has been proved to be an effective way to heighten the electrocatalytic performance for MOFs, while the function of mixed metal clusters in MOFs to the electrocatalytic activity has not been known. For the first time, we present a mixed-metal-cluster strategy to boost electrocatalytic oxygen evolution reaction (OER) performance for MOFs. Heterometal clusters (Fe₂M(μ₃-O) (CH₃COO)₆(H₂O)₃, denoted as Fe₂M (M: Co or Ni)), were chosen as the metal source to construct two bimetal PCN-250-Fe₂M. Then, we further mixed Fe₂Co and Fe₂Ni clusters to construct mixed-metal-cluster PCN-Fe₂Co-Fe₂Ni by the in situ solvothermal reaction. Consequently, the OER activity of PCN-Fe₂Co-Fe₂Ni shows a dramatic enhancement compared with that of the parent bimetal MOFs. The PCN-Fe₂Co-Fe₂Ni displays a lower overpotential of 271 mV (η₁₀), small Tafel slope (67.7 mV dec^-1), and good linear sweep voltammetry cycle stability for the OER. Combination of DFT calculation and experiment results show that the improved electrocatalytic activity of PCN-Fe₂Co-Fe₂Ni is ascribed to the increased electron density of Co and Ni active centers and electrochemically active areas.

The Role of Surface Hydroxylation, Lattice Vacancies and Bond Covalency in the Electrochemical Oxidation of Water (OER) on Ni-Depleted Iridium Oxide Catalysts

The usage of iridium as an oxygen-evolution-reaction (OER) electrocatalyst requires very high atom efficiencies paired with high activity and stability. Our efforts during the past 6 years in the Priority Program 1613 funded by the Deutsche Forschungsgemeinschaft (DFG) were focused to mitigate the molecular origin of kinetic overpotentials of Ir-based OER catalysts and to design new materials to achieve that Ir-based catalysts are more atom and energy efficient, as well as stable. Approaches involved are: (1) use of bimetallic mixed metal oxide materials where Ir is combined with cheaper transition metals as starting materials, (2) use of dealloying concepts of nanometer sized core-shell particle with a thin noble metal oxide shell combined with a hollow or cheap transition metal-rich alloy core, and (3) use of corrosion-resistant high-surface-area oxide support materials. In this mini review, we have highlighted selected advances in our understanding of Ir–Ni bimetallic oxide electrocatalysts for the OER in acidic environments.

Rational Design of Rhodium-Iridium Alloy Nanoparticles as Highly Active Catalysts for Acidic Oxygen Evolution

The oxygen evolution reaction (OER) is pivotal for renewable energy conversion and storage devices, such as water electrolyzers and rechargeable metal-air batteries. However, the rational design of electrocatalysts with suitably high efficiencies and stabilities in strongly acidic electrolytes remains a significant challenge. Here, we show the demonstration of sub-10 nm, composition-tunable Rh-Ir alloy nanoparticles (NPs) prepared using a scalable microwave-assisted method as superior acidic OER catalysts. The OER activities showed a volcano-shaped dependence on Ir composition, with Ir-rich NPs (Ir ≥ 51%) achieving better OER performance than pure Ir NPs, as reflected by lower overpotentials and higher mass activities. Most significantly, Rh₂₂Ir₇₈ NPs achieved a maximum mass activity of 1.17 A mg^-1_Ir at a 300 mV overpotential in 0.5 M H₂SO₄, which corresponds to a 3-fold enhancement relative to pure Ir NPs, making it one of the most active reported OER catalysts under acidic conditions. Density functional theory calculations reveal that owing to the synergy of ensemble and electronic effects by alloying a small amount of Rh with Ir, the binding energy difference of the O and OOH intermediates is reduced, leading to faster kinetics and enhanced OER activity. Furthermore, Rh-Ir alloy NPs demonstrated excellent durability in strongly acidic electrolyte. This work not only provides fundamental understandings relating to composition-electrochemical performance relationships but also represents the rational design of highly efficient OER electrocatalysts for applications in acidic media.

Enhanced Iridium Mass Activity of 6H-Phase, Ir-Based Perovskite with Nonprecious Incorporation for Acidic Oxygen Evolution Electrocatalysis

One of the key objectives in PEM electrolysis technology is to reduce iridium loading and to improve iridium mass activity at the side of oxygen evolution electrocatalysis. 6H-phase, Ir-based perovskite (6H-SrIrO₃) is known to be a promising alternative to the IrO₂ catalyst, and developing effective strategies to further enhance its catalytic performance is needed. Here we present that a significant enhancement in electrocatalytic activity for the oxygen evolution reaction of 6H-SrIrO₃ can be achieved by cobalt incorporation. A suitable amount of cobalt dopants results in a decreased formation temperature of 6H-SrIrO₃ from 700 to 500 °C and thereby a decreased thickness of platelike particles for the material. Besides the morphological effect, the cobalt incorporation also increases the coverage of surface hydroxyl groups, regulates the Ir-O bond covalency, and modulates the oxygen p-band center of the material. This synergistic optimization of the morphological, surface, and electronic structures makes the cobalt-doped 6H-SrIrO₃ catalyst give a 3-fold increase in iridium mass activity for oxygen evolution reaction in comparison with the undoped 6H-SrIrO₃ under acidic conditions.

Nanoporous Al-Ni-Co-Ir-Mo High-Entropy Alloy for Record-High Water Splitting Activity in Acidic Environments

Ir-based binary and ternary alloys are effective catalysts for the electrochemical oxygen evolution reaction (OER) in acidic solutions. Nevertheless, decreasing the Ir content to less than 50 at% while maintaining or even enhancing the overall electrocatalytic activity and durability remains a grand challenge. Herein, by dealloying predesigned Al-based precursor alloys, it is possible to controllably incorporate Ir with another four metal elements into one single nanostructured phase with merely ≈20 at% Ir. The obtained nanoporous quinary alloys, i.e., nanoporous high-entropy alloys (np-HEAs) provide infinite possibilities for tuning alloy's electronic properties and maximizing catalytic activities owing to the endless element combinations. Particularly, a record-high OER activity is found for a quinary AlNiCoIrMo np-HEA. Forming HEAs also greatly enhances the structural and catalytic durability regardless of the alloy compositions. With the advantages of low Ir loading and high activity, these np-HEA catalysts are very promising and suitable for activity tailoring/maximization.

Unveiling the Activity Origin of Electrocatalytic Oxygen Evolution over Isolated Ni Atoms Supported on a N-Doped Carbon Matrix

Exploring highly efficient electrocatalysts for the oxygen evolution reaction (OER) and unveiling their activity origin are pivotal for energy conversion technologies. Herein, atomically distributed Ni sites over a N-doped hollow carbon matrix are reported as a promising electrocatalyst for OER in alkaline conditions. Significantly boosted activity is observed after the decoration of the active Ni sites with well-controlled coordination geometry. Results of X-ray absorption spectroscopy investigation and density functional theory (DFT) calculation reveal that the effective electronic coupling via the Ni-N coordination can move down the Fermi level and lower the adsorption energy of intermediates, thus resulting in the facilitated OER kinetics.

Preparation of Yolk-Shell-Structured Cox Fe1-x P with Enhanced OER Performance

The design and development of low-cost, highly efficient, and stable electrocatalysts to take the place of noble-metal catalysts for the oxygen evolution reaction (OER) remain a significant challenge. Herein, the synthesis of yolk-shell-structured binary transition metal phosphide Co_x Fe_1-x P with different Co/Fe ratios by phosphidation of a cobalt ferrite precursor is reported. The as-synthesized Co_x Fe_1-x P catalysts were used for the OER. All yolk-shell Co_x Fe_1-x P catalysts with different Co/Fe ratios showed much better performance than the corresponding solid catalyst. The formation of Co oxides on the catalyst surface during OER and the optimal Co/Fe ratio were found to be critical to their activity. Among the as-prepared Co_x Fe_1-x P catalysts, that with a Co/Fe ratio of 0.47/0.53 (Co_0.47 Fe_0.53 P) exhibited the best performance. Co_0.47 Fe_0.53 P has an overpotential of 277 mV at a current density of 10 mA cm^-2 , a Tafel slope of 37 mV dec^-1 , and superior stability in alkaline medium. The outstanding performance is partly ascribed to the transfer of valence electrons from Co to P and Fe. The Co_0.47 Fe_0.53 P matrix with excellent conductivity and Fe phosphate that is stable on the surface of the catalyst are also helpful for the OER performance. In addition, the yolk-shell structure of Co_0.47 Fe_0.53 P increases the contact area between electrolyte and catalyst. These characteristics of Co_0.47 Fe_0.53 P greatly improve its OER performance. This optimized binary transition metal phosphide provides a new approach for the design of nonprecious-metal electrocatalysts.

Coral-like hierarchical architecture self-assembled by cobalt hexacyanoferrate nanocrystals and N-doped carbon nanoplatelets as efficient electrocatalyst for oxygen evolution reaction

It is challenging to develop novel oxygen evolution reaction (OER) electrocatalysts with high performance and low cost to replace the noble metal-based catalysts for large-scale electrochemical water splitting. To settle such issue, herein, self-assembled porous coral-like architecture constructed by cobalt hexacyanoferrate (CoHCF) nanocrystals and nitrogen-doped carbon (NC) nanoplatelets network is fabricated for the first time by a facile electroless deposition approach. The porous coral-like CoHCF/NC hybrid exhibits an excellent OER electrocatalytic activity in alkaline medium with an ultra-low onset overpotential of 165 mV (vs. RHE) and a small Tafel slope of 73.97 mV dec^-1, which are much lower than that of bare CoHCF (onset overpotential of 296 mV and Tafel slope of 113.25 mV dec^-1); it also exhibits a lower overpotential of 357 mV (vs. RHE) at current density of 10 mA cm^-1 and superior durability even after 16 h. The excellent electrocatalytic performance of CoHCF/NC hybrid can be assigned to its unique coral-like architecture self-assembled by CoHCF nanocrystals and NC nanoplatelets network, which significantly increases the electrochemical active surface area and remarkably facilitates the electron and ion transfer. This work offers rational design and facile synthesis strategy for transition metal hexacyanoferrate-based nonprecious electrocatalysts with unique nano-architecture and excellent electrocatalytic efficiency towards OER.

Electrochemical Flocculation Integrated Hydrogen Evolution Reaction of Fe@N-Doped Carbon Nanotubes on Iron Foam for Ultralow Voltage Electrolysis in Neutral Media

Hydrogen (H2) production is a key step in solving the energy crisis in the future. Electrocatalytic water splitting suffers from sluggish anodic oxygen evolution reaction (OER) kinetics leading to low energy conversion efficiency. Herein, a strategy is presented that integrates anodic electrochemical flocculation with cathodic hydrogen production from water splitting in 0.5 m Na2SO4. Iron encapsulated in a nitrogen-doped carbon nanotubes array on iron foam (Fe@N-CNT/IF) is employed as an electrode for the hydrogen evolution reaction (HER), and the Fe@N-CNT/IF possesses superior HER activity requiring an overpotential of 525 mV to achieve 10 mA cm-2, which is close to that of 20 wt% Pt/C. Benefiting from the lower oxidation potential of iron (E°Fe/Fe2+, 0.44 V) than that of OER (E 0 OH-/O2, 1.23 V), the cell voltage for integrated electrochemical flocculation and H2 production is significantly reduced by 1.31 V relative to overall water splitting to achieve 20 mA cm-2. More important, the production of electrochemical flocculation can be applied to water purification, because of the excellent adsorption capacity. Finally, metal-carbon electrocatalysts are prepared again by pyrolysis of flocculation adsorbents containing toxic heavy metals and organics. This result provides a new direction for designing a heterogeneous electrolysis system for energy conversion and environmental treatment applications.

Systematic Investigation of Iridium-Based Bimetallic Thin Film Catalysts for the Oxygen Evolution Reaction in Acidic Media

Multimetallic Ir-based systems offer significant opportunities for enhanced oxygen evolution electrocatalysis by modifying the electronic and geometric properties of the active catalyst. Herein, a systematic investigation of bimetallic Ir-based thin films was performed to identify activity and stability trends across material systems for the oxygen evolution reaction (OER) in acidic media. Electron beam evaporation was used to co-deposit metallic films of Ir, IrSn₂, IrCr, IrTi, and IrNi. The electrocatalytic activity of the electrochemically oxidized alloys was found to increase in the following order: IrTi < IrSn₂ < Ir ∼ IrNi < IrCr. The IrCr system demonstrates two times the catalytic activity of Ir at 1.65 V versus RHE. Density functional theory calculations suggest that this enhancement is due to Cr active sites that have improved oxygen binding energetics compared to those of pure Ir oxide. This work identifies IrCr as a promising new catalyst system that facilitates reduced precious metal loadings for acid-based OER catalysis.

High-density growth of ultrafine PdIr nanowires on graphene: reducing the graphene wrinkles and serving as efficient bifunctional electrocatalysts for water splitting

Manipulating the space distribution states, exposed surfaces, and interfacial interactions of graphene-based nanomaterials is a key strategy for taking full advantage of graphene's characteristics. Herein, we report the in situ deposition of numerous ultrafine PdIr alloy nanowires (diameter of 1.8 nm) to predominately cover the entire surface of graphene (PdIr UNWs/WFG). The high density but low atom loading (8.6 at%) of PdIr nanowires gives rise to abundant edge atoms and a rough surface, which are beneficial for the full exposure of active sites. Meanwhile, the compact PdIr overlay provides strong surface tension to stretch the graphene wrinkles, thus averting the wrapping of active sites and ensuring structural uniformity. The PdIr UNWs/WFG are qualified as efficient and robust electrocatalysts in both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), affording 10 mA cm-2 at an HER overpotential of 23 mV and 10 mA cm-2 at an OER overpotential of 290 mV, respectively. The corresponding water electrolyzer requires a cell voltage of only 1.51 V to achieve a water-splitting current density of 10 mA cm-2. This simple and novel approach for studying the coordinated form, dispersion state, and interfacial tension is promising to be a versatile method for improving the properties of graphene-based nanomaterials.

An ultrasensitive photoelectrochemical platform for quantifying photoinduced electron-transfer properties of a single entity

Understanding the photoinduced electron-transfer process is of paramount importance for realizing efficient solar energy conversion. It is rather difficult to clarify the link between the specific properties and the photoelectrochemical performance of an individual component in an ensemble system because data are usually presented as averages because of interplay of the heterogeneity of the bulk system. Here, we report a step-by-step protocol to fabricate an ultrasensitive photoelectrochemical platform for real-time detection of the intrinsic photoelectrochemical behaviors of a single entity with picoampere and sub-millisecond sensitivity. Using a micron-thickness nanoparticulate TiO₂-filmed Au ultramicroelectrode (UME) as the electron-transport electrode, photocurrent transients can be observed for each individual dye-tagged oxide semiconductor nanoparticle collision associated with a single-entity photoelectrochemical reaction. This protocol allows researchers to obtain high-resolution photocurrent signals to quantify the photoinduced electron-transfer properties of an individual entity, as well as to precisely process the data obtained. We also include procedures for dynamic light scattering (DLS) analysis, transmission electron microscopy (TEM) imaging and collision frequency-concentration correlation to confirm that the photoelectrochemical collision events occur at an unambiguously single-entity level. The time required for the entire protocol is ~36 h, with a single-entity photoelectrochemical measurement taking <1 h to complete for each independent experiment. This protocol requires basic nanoelectrochemistry and nanotechnology skills, as well as an intermediate-level understanding of photoelectrochemistry.

Tuning the Bifunctional Oxygen Electrocatalytic Properties of Core-Shell Co3O4@NiFe LDH Catalysts for Zn-Air Batteries: Effects of Interfacial Cation Valences

The rational design of excellent electrocatalysts is significant for triggering the slow kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in rechargeable metal-air batteries. Hereby, we report a bifunctional catalytic material with core-shell structure constructed by Co₃O₄ nanowire arrays as cores and ultrathin NiFe-layered double hydroxides (NiFe LDHs) as shells (Co₃O₄@NiFe LDHs). The introduction of Co₃O₄ nanowires could provide abundant active sites for NiFe LDH nanosheets. Most importantly, the deposition of NiFe LDHs on the surface of Co₃O₄ can modulate the surface chemical valences of Co, Ni, and Fe species via changing the electron donor and/or electron absorption effects, finally achieving the balance and optimization of ORR and OER properties. By this core-shell design, the maximum ORR current densities of Co₃O₄@NiFe LDHs increase to 3-7 mA cm^-2, almost an order of magnitude increases compared to pure NiFe LDH (0.45 mA cm^-2). Significantly, an OER overpotential as low as 226 mV (35 mA cm^-2) is achieved in the designed core-shell catalyst, which is comparable to and/or even better than those of commercial Ir/C. Hence, the primary zinc-air battery employing Co₃O₄@NiFe LDH as an air electrode achieves a high specific capacity (667.5 mA h g^-1) and first-class energy density (797.6 W h kg^-1); the rechargeable battery can show superior reversibility, excellent stability, and voltage gaps of ∼0.8 V (∼60% of round-trip efficiency) in >1200 continuous cycles. Furthermore, the flexible quasi-solid-state zinc-air battery with bendable ability holds practical potential in portable and wearable electronic devices.

Oxygen Evolution Reaction at IrO2/Ir(Ni) Film Electrodes Prepared by Galvanic Replacement and Anodization: Effect of Precursor Ni Film Thickness

IrO2/Ir(Ni) film electrodes of variable Ni content have been prepared via a galvanic replacement method, whereby surface layers of pre-deposited Ni are replaced by Ir, followed by electrochemical anodization. Electrodeposition of Ni on a glassy carbon electrode support has been carried out at constant potential and the charge of electrodeposited Ni controlled so as to investigate the effect of precursor Ni layer thickness on the electrocatalytic activity of the corresponding IrO2/Ir(Ni)/GC electrodes for the oxygen evolution reaction (OER). After their preparation, these electrodes were characterized by microscopic (SEM) and spectroscopic (EDS, XPS) techniques, revealing the formation of Ir deposits on the Ni support and a thin IrO2 layer on their surfaces. To determine the electroactive surface area of the IrO2 coatings, cyclic voltammograms were recorded in the potential range between hydrogen and oxygen evolution and the charge under the anodic part of the curves, corresponding to Ir surface oxide formation, served as an indicator of the quantity of active IrO2 in the film. The electrocatalytic activity of the coatings for OER was investigated by current-potential curves under steady state conditions, revealing that the catalysts prepared from thinner Ni films exhibited enhanced electrocatalytic performance.