Production and implantation of renal extracellular matrix scaffolds from porcine kidneys as a platform for renal bioengineering investigations

ADVANCED TISSUE ENGINEERING STRATEGIES FOR VASCULARIZED PARENCHYMAL CONSTRUCTS

The fabrication of vascularized parenchymal organs to alleviate donor shortage in organ transplantation is the holy grail of tissue engineering. However, conventional tissue-engineering strategies have encountered huge challenges in recapitulating complex structural organization of native organs (e.g., orderly arrangement of multiple cell types and vascular network), which plays an important role in engineering functional vascularized parenchymal constructs in vitro. Recent developments of various advanced tissue-engineering strategies have exhibited great promise in replicating organ-specific architectures into artificial constructs. Here, we review the recent advances in top-down and bottom-up strategies for the fabrication of vascularized parenchymal constructs. We highlight the fabrication of microfluidic scaffolds potential for nutrient transport or vascularization as well as the controlled multicellular arrangement. The advantages as well as the limitations associated with these strategies will be discussed. It is envisioned that the combination of microfluidic concept in top-down strategies and multicellular arrangement concept in bottom-up strategies could potentially generate new insights for the fabrication of vascularized parenchymal organs.

Recellularization of well-preserved acellular kidney scaffold using embryonic stem cells

For chronic kidney diseases, there is little chance that the vast majority of world's population will have access to renal replacement therapy with dialysis or transplantation. Tissue engineering would help to address this shortcoming by regeneration of damaged kidney using naturally occurring scaffolds seeded with precursor renal cells. The aims of the present study were to optimize the production of three-dimensional (3D) rat whole-kidney scaffolds by shortening the duration of organ decellularization process using detergents that avoid nonionic compounds, to investigate integrity of extracellular matrix (ECM) structure and to enhance the efficacy of scaffold cellularization using physiological perfusion method. Intact rat kidneys were successfully decellularized after 17 h perfusion with sodium dodecyl sulfate. The whole-kidney scaffolds preserved the 3D architecture of blood vessels, glomeruli, and tubuli as shown by transmission and scanning electron microscopy. Micro-computerized tomography (micro-CT) scan confirmed integrity, patency, and connection of the vascular network. Collagen IV, laminin, and fibronectin staining of decellularized scaffolds were similar to those of native kidney tissues. After infusion of whole-kidney scaffolds with murine embryonic stem (mES) cells through the renal artery, and pressure-controlled perfusion with recirculating cell medium for 24 and 72 h, seeded cells were almost completely retained into the organ and uniformly distributed in the vascular network and glomerular capillaries without major signs of apoptosis. Occasionally, mES cells reached peritubular capillary and tubular compartment. We observed the loss of cell pluripotency and the start of differentiation toward meso-endodermal lineage. Our findings indicate that, with the proposed optimized protocol, rat kidneys can be efficiently decellularized to produce renal ECM scaffolds in a relatively short time, and rapid recellularization of vascular structures and glomeruli. This experimental setup may open the possibility to obtain differentiation of stem cells with long lasting in vitro perfusion.

Extracellular Matrix Scaffold Technology for Bioartificial Pancreas Engineering: State of the Art and Future Challenges

Emergent technologies in regenerative medicine may soon overcome the limitations of conventional diabetes therapies. Collaborative efforts across the subfields of stem cell technology, islet encapsulation, and biomaterial carriers seek to produce a bioengineered pancreas capable of restoring endocrine function in patients with insulin-dependent diabetes. These technologies rely on a robust understanding of the extracellular matrix (ECM), the supportive 3-dimensional network of proteins necessary for cellular attachment, proliferation, and differentiation. Although these functions can be partially approximated by biosynthetic carriers, novel decellularization protocols have allowed researchers to discover the advantages afforded by the native pancreatic ECM. The native ECM has proven to be an optimal platform for recellularization and whole-organ pancreas bioengineering, an exciting new field with the potential to resolve the dire shortage of transplantable organs. This review seeks to contextualize recent findings, discuss current research goals, and identify future challenges of regenerative medicine as it applies to diabetes management.

Engineered liver for transplantation

Orthotopic liver transplantation is the only definitive treatment for end stage liver failure and the shortage of donor organs severely limits the number of patients receiving transplants. Liver tissue engineering aims to address the donor liver shortage by creating functional tissue constructs to replace a damaged or failing liver. Despite decades of work, various bottoms-up, synthetic biomaterials approaches have failed to produce a functional construct suitable for transplantation. Recently, a new strategy has emerged using whole organ scaffolds as a vehicle for tissue engineering. This technique involves preparation of these organ scaffolds via perfusion decellularization with the resulting scaffold retaining the circulatory network of the native organ. This important phenomenon allows for the construct to be repopulated with cells and to be connected to the blood torrent upon transplantation. This opinion paper presents the current advances and discusses the challenges of creating fully functional transplantable liver grafts with this whole liver engineering approach.

Organ bioengineering and regeneration as the new Holy Grail for organ transplantation

Organ transplantation is a victim of its own success. In view of the excellent results achieved to date, the demand for organs is escalating whereas the supply has reached a plateau. Consequently, waiting times and mortality on the waiting list are increasing dramatically. Recent achievements in organ bioengineering and regeneration have provided proof of principle that the application of organ bioengineering and regeneration technologies to manufacture organs for transplant purposes may offer the quickest route to clinical application. As investigators are focusing their interest on the utilization and manipulation of autologous cells, ideally the end product will be the equivalent of an autograft such that the recipient will not require any antirejection medication. Achievement of an immunosuppression-free state has been pursued but has proven to be a difficult odyssey since the early days of the transplant era, yet an immediate, stable, durable, and reproducible immunosuppression-free state remains an unfulfilled quest. As organ bioengineering and regeneration has shown the potential to meet both the needs for a new source of organs that may eclipse the increasing organ demand and an immunosuppression-free state, advances in this field could become the new Holy Grail for transplant sciences.

Will regenerative medicine replace transplantation?

Recent groundbreaking advances in organ bioengineering and regeneration have provided evidence that regenerative medicine holds promise to dramatically improve the approach to organ transplantation. The two fields, however, share a common heritage. Alexis Carrel can be considered the father of both regenerative medicine and organ transplantation, and it is now clear that his legacy is equally applicable for the present and future generations of transplant and regenerative medicine investigators. In this review, we will briefly illustrate the interplay that should be established between these two complementary disciplines of health sciences. Although regenerative medicine has shown to the transplant field its potential, transplantation is destined to align with regenerative medicine and foster further progress probably more than either discipline alone. Organ bioengineering and regeneration technologies hold the promise to meet at the same time the two most urgent needs in organ transplantation, namely, the identification of a new, potentially inexhaustible source of organs and immunosuppression-free transplantation of tissues and organs.

Transplantable liver production plan: "Yamaton"--liver project, Japan

Organ grafts developed in the xenogeneic pig scaffold are expected to resolve most issues of donor safety and ethical concerns about living-donor liver transplantation in Japan. We have been working on so-called "Yamaton" projects to develop transplantable organs using genetically engineered pigs. Our goal is to produce chimeric livers with human parenchyma in such pigs. The Yamaton-Liver project demonstrated the proof of concept by showing that rat-mouse chimeric livers could develop in mice and be successfully transplanted into syngeneic or allogeneic rats. Under conventional immunosuppression, the transplanted livers showed long-term function and protection against rejection. Because chimeric liver grafts have xenogeneic components, additional strategies, such as humanization of pig genes, induction of hematopoietic chimeras in donors, and replacement of pig endothelial cells with human ones, might be required in clinical use. Our projects still need to overcome various hurdles but can bring huge benefits to patients in the future.

Immunogenicity of decellularized porcine liver for bioengineered hepatic tissue

Liver disease affects millions of patients each year. The field of regenerative medicine promises alternative therapeutic approaches, including the potential to bioengineer replacement hepatic tissue. One approach combines cells with acellular scaffolds derived from animal tissue. The goal of this study was to scale up our rodent liver decellularization method to livers of a clinically relevant size. Porcine livers were cannulated via the hepatic artery, then perfused with PBS, followed by successive Triton X-100 and SDS solutions in saline buffer. After several days of rinsing, decellularized liver samples were histologically analyzed. In addition, biopsy specimens of decellularized scaffolds were seeded with hepatoblastoma cells for cytotoxicity testing or implanted s.c. into rodents to investigate scaffold immunogenicity. Histological staining confirmed cellular clearance from pig livers, with removal of nuclei and cytoskeletal components and widespread preservation of structural extracellular molecules. Scanning electron microscopy confirmed preservation of an intact liver capsule, a porous acellular lattice structure with intact vessels and striated basement membrane. Liver scaffolds supported cells over 21 days, and no increased immune response was seen with either allogeneic (rat-into-rat) or xenogeneic (pig-into-rat) transplants over 28 days, compared with sham-operated on controls. These studies demonstrate that successful decellularization of the porcine liver could be achieved with protocols developed for rat livers, yielding nonimmunogenic scaffolds for future hepatic bioengineering studies.

Preservation of micro-architecture and angiogenic potential in a pulmonary acellular matrix obtained using intermittent intra-tracheal flow of detergent enzymatic treatment

Tissue engineering of autologous lung tissue aims to become a therapeutic alternative to transplantation. Efforts published so far in creating scaffolds have used harsh decellularization techniques that damage the extracellular matrix (ECM), deplete its components and take up to 5 weeks to perform. The aim of this study was to create a lung natural acellular scaffold using a method that will reduce the time of production and better preserve scaffold architecture and ECM components. Decellularization of rat lungs via the intratracheal route removed most of the nuclear material when compared to the other entry points. An intermittent inflation approach that mimics lung respiration yielded an acellular scaffold in a shorter time with an improved preservation of pulmonary micro-architecture. Electron microscopy demonstrated the maintenance of an intact alveolar network, with no evidence of collapse or tearing. Pulsatile dye injection via the vasculature indicated an intact capillary network in the scaffold. Morphometry analysis demonstrated a significant increase in alveolar fractional volume, with alveolar size analysis confirming that alveolar dimensions were maintained. Biomechanical testing of the scaffolds indicated an increase in resistance and elastance when compared to fresh lungs. Staining and quantification for ECM components showed a presence of collagen, elastin, GAG and laminin. The intratracheal intermittent decellularization methodology could be translated to sheep lungs, demonstrating a preservation of ECM components, alveolar and vascular architecture. Decellularization treatment and methodology preserves lung architecture and ECM whilst reducing the production time to 3 h. Cell seeding and in vivo experiments are necessary to proceed towards clinical translation.

Discarded human kidneys as a source of ECM scaffold for kidney regeneration technologies

In the United States, more than 2600 kidneys are discarded annually, from the total number of kidneys procured for transplant. We hypothesized that this organ pool may be used as a platform for renal bioengineering and regeneration research. We previously showed that decellularization of porcine kidneys yields renal extracellular matrix (ECM) scaffolds that maintain their basic components, support cell growth and welfare in vitro and in vivo, and show an intact vasculature that, when such scaffolds are implanted in vivo, is able to sustain physiological blood pressure. The purpose of the current study was to test if the same strategy can be applied to discarded human kidneys in order to obtain human renal ECM scaffolds. The results show that the sodium dodecylsulfate-based decellularization protocol completely cleared the cellular compartment in these kidneys, while the innate ECM framework retained its architecture and biochemical properties. Samples of human renal ECM scaffolds stimulated angiogenesis in a chick chorioallantoic membrane assay. Importantly, the innate vascular network in the human renal ECM scaffolds retained its compliance. Collectively, these results indicate that discarded human kidneys are a suitable source of renal scaffolds and their use for tissue engineering applications may be more clinically applicable than kidneys derived from animals.

Regeneration and experimental orthotopic transplantation of a bioengineered kidney

Over 100,000 individuals in the United States currently await kidney transplantation, while 400,000 individuals live with end-stage kidney disease requiring hemodialysis. The creation of a transplantable graft to permanently replace kidney function would address donor organ shortage and the morbidity associated with immunosuppression. Such a bioengineered graft must have the kidney’s architecture and function, and permit perfusion, filtration, secretion, absorption, and drainage of urine. We decellularized rat, porcine, and human kidneys by detergent perfusion, yielding acellular scaffolds with vascular, cortical and medullary architecture, collecting system and ureters. To regenerate functional tissue, we seeded rat kidney scaffolds with epithelial and endothelial cells, then perfused these cell-seeded constructs in a whole organ bioreactor. The resulting grafts produced rudimentary urine in vitro when perfused via their intrinsic vascular bed. When transplanted in orthotopic position in rat, the grafts were perfused by the recipient’s circulation, and produced urine via the ureteral conduit in vivo.

Porcine pancreas extracellular matrix as a platform for endocrine pancreas bioengineering

Emergent technologies of regenerative medicine have the potential to overcome the limitations of organ transplantation by supplying tissues and organs bioengineered in the laboratory. Pancreas bioengineering requires a scaffold that approximates the biochemical, spatial and vascular relationships of the native extracellular matrix (ECM). We describe the generation of a whole organ, three-dimensional pancreas scaffold using acellular porcine pancreas. Imaging studies confirm that our protocol effectively removes cellular material while preserving ECM proteins and the native vascular tree. The scaffold was seeded with human stem cells and porcine pancreatic islets, demonstrating that the decellularized pancreas can support cellular adhesion and maintenance of cell functions. These findings advance the field of regenerative medicine towards the development of a fully functional, bioengineered pancreas capable of establishing and sustaining euglycemia and may be used for transplantation to cure diabetes mellitus.

Bioreactor design for perfusion-based, highly-vascularized organ regeneration

Bioartificial or laboratory-grown organs is a growing field centered on developing replacement organs and tissues to restore body function and providing a potential solution to the shortage of donor organs for transplantation. With the entry of engineered planar tissues, such as bladder and trachea, into clinical studies, an increasing focus is being given to designing complex, three-dimensional solid organs. As tissues become larger, thicker and more complex, the vascular network becomes crucial for supplying nutrients and maintaining viability and growth of the neo-organ. Perfusion decellularization, the process of removing cells from an entire organ, leaves the matrix of the vascular network intact. Organ engineering requires a delicate process of decellularization, sterilization, reseeding with appropriate cells, and organ maturation and stimulation to ensure optimal development. The design of bioreactors to facilitate this sequence of events has been refined to the extent that some bioartificial organs grown in these systems have been transplanted into recipient animals with sustained, though limited, function. This review focuses on the state-of-art in bioreactor development for perfusion-based bioartificial organs and highlights specific design components in need of further refinement.

Regeneration and bioengineering of transplantable abdominal organs: current status and future challenges

INTRODUCTION

The most critical issue to organ transplantation is the identification of new sources of organs. The present manuscript illustrates the state-of-the-art regenerative medicine (RM) investigations aiming to manufacturing abdominal organs for transplant purposes.

AREAS COVERED

This manuscript focuses on research in the bioengineering and regeneration of kidneys, insulin-producing cells, livers and small bowel. The main technology currently under development exploits the seeding of cells on supporting scaffolding material. Despite favorable preliminary results obtained with relatively simple, hollow organs, when more complex organs are considered, the scenario changes dramatically. Investigations are still in early stages, and clinical translation is not yet foreseeable based on current knowledge and information. Obstacles are numerous but we believe the critical factor hampering success is lack of in-depth understanding of the extracellular matrix (ECM) and cell-ECM interactions, as well as the mechanisms with which organs develop in utero.

EXPERT OPINION

The success of RM to generate transplantable abdominal organs relies heavily on progress in (stem) cell therapies, developmental and ECM biology, and in the thorough understanding of the intricate relationship and interplay between cells and the ECM. This will require enormous investments in financial and medical resources, which ideally should be embarked upon by governments, the private sector and academia.

Decellularization methods of porcine kidneys for whole organ engineering using a high-throughput system

End-stage renal failure is a devastating disease, with donor organ transplantation as the only functional restorative treatment. The current number of donor organs meets less than one-fifth of demand, so regenerative medicine approaches have been proposed as potential therapeutic alternatives. One such approach for whole large-organ bioengineering is to combine functional renal cells with a decellularized porcine kidney scaffold. The efficacy of cellular removal and biocompatibility of the preserved porcine matrices, as well as scaffold reproducibility, are critical to the success of this approach. We evaluated the effectiveness of 0.25 and 0.5% sodium dodecyl sulfate (SDS) and 1% Triton X-100 in the decellularization of adult porcine kidneys. To perform the decellularization, a high-throughput system was designed and constructed. In this study all three methods examined showed significant cellular removal, but 0.5% SDS was the most effective detergent (<50 ng DNA/mg dry tissue). Decellularized organs retained intact microarchitecture including the renal vasculature and essential extracellular matrix components. The SDS-treated decellularized scaffolds were non-cytotoxic to primary human renal cells. This method ensures clearance of porcine cellular material (which directly impacts immunoreactivity during transplantation) and preserves the extracellular matrix and cellular compatibility of these renal scaffolds. Thus, we have developed a rapid decellularization method that can be scaled up for use in other large organs, and this represents a step toward development of a transplantable organ using tissue engineering techniques.