Catalytic role of metal oxides in gold-based catalysts: a first principles study of CO oxidation on TiO2 supported Au

Electron-beam-induced growth of TiO(2) nanostructures

We report the evolution of titanium dioxide nanostructures when Au nanoparticles, supported on single crystal TiO(2) substrates, were heated under ∼260 Pa of flowing O(2) in an environmental transmission electron microscope. Nanostructures with different morphologies were first observed around 500°C. Our measurements show that temperature, oxygen pressure, and the electron beam control the nanostructure growth. We propose a reaction-controlled growth mechanism where mobile Ti atoms generated by the electron- beam-induced reduction of TiO(2) are preferentially reoxidized at the Au-TiO(2) interface.

Water-gas shift reaction on oxide∕Cu(111): Rational catalyst screening from density functional theory

Developing improved catalysts based on a fundamental understanding of reaction mechanism has become one of the grand challenges in catalysis. A theoretical understanding and screening the metal-oxide composite catalysts for the water-gas shift (WGS) reaction is presented here. Density functional theory was employed to identify the key step for the WGS reaction on the Au, Cu-oxide catalysts, where the calculated reaction energy for water dissociation correlates well with the experimental measured WGS activity. Accordingly, the calculated reaction energy for water dissociation was used as the scaling descriptor to screen the inverse model catalysts, oxide∕Cu(111), for the better WGS activity. Our calculations predict that the WGS activity increases in a sequence: Cu(111), ZnO∕Cu(111) < TiO(2)∕Cu(111), ZrO(2)∕Cu(111) < MoO(3)∕Cu(111). Our results imply that the high performances of Au, Cu-oxide nanocatalysts in the WGS reaction rely heavily on the direct participation of both oxide and metal sites. The degree that the oxide is reduced by Cu plays an important role in determining the WGS activity of oxide∕Cu catalysts. The reducible oxide can be transformed from the fully oxidized form to the reduced form due to the interaction with Cu and, therefore, the transfer of electron density from Cu, which helps in releasing the bottleneck water dissociation and, therefore, facilitating the WGS reaction on copper.

Model studies on CO oxidation catalyst systems: titania and gold nanoparticles

The peculiar catalytic activity of Au-supported titanium dioxide surfaces in the CO oxidation reaction has been a focus of interest for more than twenty years. Herein, recent data concerning preparation and structural characterisation of planar catalyst model systems consisting of single-crystalline titania and/or gold nanoparticles deposited thereon is presented and reviewed. We first expand on the deposition and growth of TiO(2) films on selected metal host surfaces and then consider the deposition of Au nanoparticles on these surfaces, including information on their geometric and electronic structures. The second issue is the interaction of these materials with carbon monoxide (one of the essential ingredients of the CO oxidation reaction) which serves as a probe molecule and monitor of the chemical activity of the model catalyst samples. Concerted efforts relating the structural and chemical properties of the respective binary materials (titania support plus deposited gold) can help to tackle and finally resolve the still open problems concerning the high activity of Au-TiO(2) catalysts in the CO oxidation reaction.

Room-temperature reaction of oxygen with gold: an in situ ambient-pressure X-ray photoelectron spectroscopy investigation

The interaction of O(2) with gold foil and gold nanoparticles grown by thermal deposition on TiO(2)(110) was studied by in situ ambient pressure X-ray photoelectron spectroscopy at room temperature. No spontaneous dissociation of O(2) was observed either on Au foil or on Au nanoparticles up to 1 Torr of O(2). X-ray irradiation, however, is very effective in promoting gold oxidation on both surfaces in the presence of O(2). Our results help reconcile recent conflicting experimental observations regarding the activation of molecular oxygen, which is a crucial issue in Au catalyzed oxidation reactions.

Icosahedral crown gold nanocluster au(43)cu(12) with high catalytic activity

Structural and catalytic properties of the gold alloy nanocluster Au(43)Cu(12) are investigated using a density-functional method. In contrast to the pure Au(55) nanocluster, which exhibits a low-symmetry C(1) structure, the 55-atom "crown gold" nanocluster exhibits a multishell structure, denoted by Au@Cu(12)@Au(42), with the highest icosahedral group-symmetry. In addition, density functional calculations suggest that this geometric magic-number nanocluster possesses comparable catalytic capability as a small-sized Au(10) cluster for the CO oxidation, due in part to their low-coordinated Au atoms on vertexes. The gold alloy nanocluster also shows higher selectivity for styrene oxidation than the bare Au(111) surface.

Porous alpha-Fe2O3 decorated by Au nanoparticles and their enhanced sensor performance

Porous alpha-Fe(2)O(3) was synthesized by simple calcination of a beta-FeOOH precursor derived from a facile hydrothermal method. In the hydrothermal process, only FeCl(3).6H(2)O was used as the source material and no templates or pore-directing agents were needed. The as-prepared porous alpha-Fe(2)O(3) was further employed as a support for loading Au nanoparticles (AuNPs). Due to the advantages of porous nanostructures (large surface area and facile gas diffusion) and the catalytic capability of AuNPs, the derived AuNP-supported porous alpha-Fe(2)O(3) was further investigated for gas sensor applications using ethanol as a probe molecule. Obtained results showed that the AuNP-supported porous alpha-Fe(2)O(3) exhibited a much higher response in comparison to pure alpha-Fe(2)O(3). The enhanced sensor properties are attributed to the unique porous structures of the alpha-Fe(2)O(3) support and active AuNPs for promoting sensing reactions, as well as the synergic electronic interaction between Au and alpha-Fe(2)O(3). It is expected that noble metals such as Ag, Pt and Pd can also be supported on other porous metal oxide semiconductors to explore superior properties of functional nanomaterials.

O2 evolution on a clean partially reduced rutile TiO2(110) surface and on the same surface precovered with Au1 and Au2: the importance of spin conservation

We have used spin-polarized density functional theory (DFT) to study O(2) evolution on a clean partially reduced rutile TiO(2)(110) surface (i.e., a surface having oxygen vacancies) and its interaction with Au(1) or Au(2) cluster adsorbed on it. We assume that the total spin of the electronic wave function is related to the number of unpaired spins (N(s)) and calculate the binding and the activation energies involved in O(2) evolution for fixed values of N(s). In addition to keeping N(s) constant, we assume that reactions in which the N(s) of the reactants differs from that of the products are very slow. The potential energy surfaces obtained in this way depend strongly on N(s). For example, O(2) dissociation at the vacancy site on a clean partially reduced TiO(2)(110) surface is exothermic by 0.85 eV in the triplet state and the highest activation energy in the chain of reactions leading to the O(2) dissociation is 0.67 eV. In the singlet state, O(2) dissociation is endothermic by 0.11 eV and the activation energy leading to dissociation is 1.30 eV. These observations are in qualitative agreement with scanning tunneling microscopy experiment in which O(2) dissociation on a partially reduced rutile TiO(2)(110) surface is observed at temperature as low as 120 K. In contrast, O(2) dissociation is predicted to be endothermic and is prevented by an activation barrier larger than 1 eV in all the previous DFT calculations, in which the DFT program varies N(s) to get the lowest energy state. We find that on a partially reduced rutile TiO(2)(110) with Au(1) and Au(2) preadsorbed on its surface, O(2) dissociates at the vacancy site: One oxygen atom fills the oxygen vacancy and the other becomes available for oxidation chemistry. This means that Au(1) and Au(2) supported on a partially reduced TiO(2)(110) surface is not an oxidation catalyst since the presence of oxygen turns it into a stoichiometric Au(n)/TiO(2)(110) surface. Finally, we find that the evolution of oxygen on Au(1) and Au(2) in the gas phase is very different from the evolution on the same clusters supported on the partially reduced TiO(2)(110) surface. For example, the molecular adsorption of O(2) is favored in the gas phase (except on Au(1) (-) and Au(2) (-) in the quartet state), while the dissociative adsorption is favored by more than 1 eV when Au(1) and Au(2) are supported on the partially reduced TiO(2)(110). Furthermore, the activation energies associated with O(2) dissociation in the gas phase (DeltaE(act)>2.4 eV) are reduced by at least a factor of 2 when the clusters are supported on TiO(2)(110).

Recent Progress in Syntheses and Applications of Dumbbell-like Nanoparticles

This paper reviews the recent research progress in syntheses and applications of dumbbell-like nanoparticles. It first describes the general synthesis of dumbbell-like nanoparticles containing noble metal and magnetic NPs/or quantum dots. It then outlines the interesting optical and magnetic properties found in these dumbbell nanoparticles. The review further highlights several exciting application potentials of these nanoparticles in catalysis and biomedicine.

Theory and simulation in heterogeneous gold catalysis

This critical review covers the application of quantum chemistry to the burgeoning area of the heterogeneous oxidation by Au. We focus on the most established reaction, the oxidation of CO at low temperature. The review begins with an overview of the methods available comparing the treatment of the electron-electron interaction and relativistic effects. The structure of Au particles and their interaction with oxide reviews is then discussed in detail. Calculations of the adsorption and reaction of CO and O2 are then considered and results from isolated and supported Au clusters compared (155 references).

CO oxidation catalyzed by single-walled helical gold nanotube

We study the catalytic capability of unsupported single-walled helical gold nanotubes Au(5,3) by using density functional theory. We use the CO oxidation as a benchmark probe to gain insights into high catalytic activity of the gold nanotubes. The CO oxidation, catalyzed by the Au(5,3) nanotube, proceeds via a two-step mechanism, CO + O2 --> CO2 +O and CO + O --> CO2. The CO oxidation is initiated by the CO + O2 --> OOCO --> CO2 + O reaction with an activation barrier of 0.29 eV. On the reaction path, a peroxo-type O-O-CO intermediate forms. Thereafter, the CO + O --> CO2 reaction proceeds along the reaction pathway with a very low barrier (0.03 eV). Note that the second reaction cannot be the starting point for the CO oxidation due to the energetically disfavored adsorption of free O2 on the gold nanotube. The high catalytic activity of the Au(5,3) nanotube can be attributed to the electronic resonance between electronic states of adsorbed intermediate species and Au atoms at the reaction site, particularly among the d states of Au atom and the antibonding 2pi* states of C-O and O1-O2, concomitant with a partial charge transfer. The presence of undercoordinated Au sites and the strain inherent in the helical gold nanotube also play important roles. Our study suggests that the CO oxidation catalyzed by the helical gold nanotubes is likely to occur at the room temperature.

Adsorption, diffusion and desorption of chlorine on and from rutile TiO2{110}: a theoretical investigation

The adsorption, diffusion and desorption of chlorine on and from stoichiometric, reduced and partially reduced (defective) rutile TiO2{110} are investigated using ab initio density functional theory (DFT) calculations. Theoretical results are compared with experimental investigations, and microkinetic simulations based on DFT values are then used to verify the diffusion mechanisms assumed in the experimental investigations.

Interaction of Pt clusters with the anatase TiO(2)(101) surface: a first principles study

The adsorption of Pt(n)() (n = 1-3) clusters on the defect-free anatase TiO(2)(101) surface has been studied using total energy pseudopotential calculations based on density functional theory. The defect-free anatase TiO(2)(101) surface has a stepped structure with a step width of two O-Ti bond distances in the (100) plane along the [10] direction and the edge of the step is formed by 2-fold-coordinated oxygen atoms along the [010] direction. For a single Pt adatom, three adsorption sites were found to be stable. Energetically, the Pt adatom prefers the bridge site formed by 2 2-fold-coordinated oxygen atoms with an adsorption energy of 2.84 eV. Electronic structure analysis showed that the Pt-O bonds formed upon Pt adsorption are covalent. Among six stable Pt(2) adsorption configurations examined, Pt(2) was found to energetically favor the O-O bridge sites on the step edge along [010] with the Pt-Pt bond axis perpendicular to [010]. In these configurations, one of the Pt atoms occupies the same O-O bridge site as for a single Pt adatom and the other one either binds a different 2-fold-coordinated oxygen atom on the upper step or a 5-fold-coordinated Ti atom on the lower terrace. Three triangular and three open Pt(3) structures were determined as minima for Pt(3) adsorption on the surface. Platinum trimers adsorbed in triangular structures are more stable than in open structures. In the most stable configuration, Pt(3) occupies the edge O-O site with the Pt(3) plane being upright and almost perpendicular to the [001] terrace. The preference of Pt(n)() to the coordinately unsaturated 2-fold-coordinated oxygen sites indicates that these sites may serve as nucleation centers for the growth of metal clusters on the oxide surface. The increase in clustering energy with increasing size of the adsorbed Pt clusters indicates that the growth of Pt on this surface will lead to the formation of three-dimensional particles.