Metal-on-metal bearings and hypersensitivity in patients with artificial hip joints. A clinical and histomorphological study

Metal Hypersensitivity Reactions to Orthopedic Implants

Total hip and knee replacement surgery using metal alloy devices is common. Type IV allergic reactions to these implants occur, though infrequently. While uncommon, peri-implant metal allergic reactions may cause significant morbidity for the affected individual-including aseptic loosening, pseudotumor formation and frank device failure. It is challenging to predict who will have these reactions, even in those with established pre-implant metal allergy. At this time, the scientific literature clearly supports few conclusions. Despite this, we believe several conclusions can be made: routine pre-implant testing in asymptomatic individuals is not indicated; listen to patient's concerns about metal allergy if the concern arises; patch testing is probably the best pre- and post-implant screening test; post-implantation testing is controversial and even positive LTT or patch test does not definitively diagnose morbidity from a metal allergy; and complete recovery following revision placement of an immunologically inert device is diagnostic. More research is needed to scientifically approach this issue.

Articulating polymethylmethacrylate (PMMA) spacers may have an immunomodulating effect on synovial tissue

AIMS

Tissue responses to debris formed by abrasion of polymethylmethacrylate (PMMA) spacers at two-stage revision arthroplasty for prosthetic joint infection are not well described. We hypothesised that PMMA debris induces immunomodulation in periprosthetic tissues.

PATIENTS AND METHODS

Samples of tissue were taken during 35 two-stage revision arthroplasties (nine total hip and 26 total knee arthroplasties) in patients whose mean age was 67 years (44 to 85). Fourier transform infrared microscopy was used to confirm the presence of PMMA particles. Histomorphometry was performed using Sudan Red and Haematoxylin-Eosin staining. CD-68, CD-20, CD-11(c), CD-3 and IL-17 antibodies were used to immunophenotype the inflammatory cells. All slides were scored semi-quantitatively using the modified Willert scoring system.

RESULTS

The mean CD-68 scores did not show any significant change during the six weeks between the stages. Perivascular and diffuse scores showed significant difference in CD-3, CD-20, CD-11(c) and IL-17. At the time of re-implantation, a shift in the pattern of the expression of dendritic cells towards a perivascular arrangement and towards the periphery of PMMA particles was observed. Positive microbiological cultures were found at the time of re-implantation in three patients. Five further revisions were required for other reasons.

CONCLUSION

Our results represent a biological reaction of the synovial tissues to spacers with a less diffuse expression of dendritic cells and an increased expression of perivascular lymphocytes. The use of spacers in two-stage revision for infection probably induces an immunomodulation of synovial tissues. Cite this article: Bone Joint J 2016;98-B:1062-8.

Allergies in orthopaedic and trauma surgery

Hypersensitivity reactions to implants in orthopaedic and trauma surgery are a rare but devastating complication. They are considered as a delayed-type of hypersensitivity reaction (type IV), characterized by an antigen activation of sensitized T-lymphocytes releasing various cytokines and may result in osteoclast activation and bone resorption. Potential haptens are originated from metal alloys or bone-cement. A meta-analysis has confirmed a higher probability of developing a metal hypersensitivity postoperatively and noted a greater risk of failed replacements compared to stable implants. Hypersensitivity to implants may present with a variety of symptoms such as pain, joint effusion, delayed wound/bone healing, persistent secretion, allergic dermatitis (localized or systemic), clicking noises, loss of joint function, instability and failure of the implant. Various diagnostic options have been offered, including patch testing, metal alloy patch testing, histology, lymphocyte transformation test (LTT), memory lymphocyte immunostimulation assay (MELISA), leukocyte migration inhibition test (LIF) and lymphocyte activation test (LAT). No significant differences between in vivo and in vitro methods have been found. Due to unconvincing evidence for screening methods, predictive tests are not recommended for routine performance. Infectious aetiology always needs to be excluded. As there is a lack of evidence on large-scale studies with regards to the optimal treatment option, management currently relies on individual case-by-case decisions. Several options for patients with (suspected) metal-related hypersensitivity exist and may include materials based on ceramic, titanium or oxinium or modified surfaces. Promising results have been reported, but long-term experience is lacking. More large-scaled studies are needed in this context. In patients with bone-cement hypersensitivity, the component suspected for hypersensitivity should be avoided. The development of (predictive) biomarkers is considered as a major contribution for the future.

Revision total knee arthroplasty due to bone cement and metal hypersensitivity

INTRODUCTION

Hypersensitivity to implants is a rare complication of total knee arthroplasty (TKA). Metal and, less frequently, bone cement can produce allergic symptomatology that if unresponsive to conservative treatment could lead to revision.

MATERIALS AND METHODS

We present the case of a patient with generalized pruritus and metal taste starting during the first postoperative month after TKA. Dermal allergy exams revealed that the patient had hypersensitivity to nickel sulphate and cobalt chloride and bone cement. Conservative treatment with antihistamine medication and corticosteroids failed to control the symptoms. The patient underwent revision TKA with a hypoallergic prosthesis 8 months after the primary procedure.

RESULTS

Full disappearance of the symptoms occurred 3 months after revision. The latest follow-up evaluation (3 years post-revision) was unremarkable.

CONCLUSIONS

In our opinion, an exhaustive medical history should be obtained from every candidate for total joint replacement and in cases of prior severe allergic reactions to metals, plastics or glues, patch testing of the components of the future prosthesis should be done. When an already implanted prosthesis causes symptoms like pain, edema, pruritus, erythema, limited range of motion and increase in joint's temperature, the possibility of allergy to metals and/or bone cement (in case of cemented prosthesis) should be checked after the exclusion of other reasons like infection. If symptoms cannot be controlled by conservative measures, revision should be decided and carried out with hypoallergic prosthesis.

Environmental Factors Impacting Bone-Relevant Chemokines

Chemokines play an important role in normal bone physiology and the pathophysiology of many bone diseases. The recent increased focus on the individual roles of this class of proteins in the context of bone has shown that members of the two major chemokine subfamilies-CC and CXC-support or promote the formation of new bone and the remodeling of existing bone in response to a myriad of stimuli. These chemotactic molecules are crucial in orchestrating appropriate cellular homing, osteoblastogenesis, and osteoclastogenesis during normal bone repair. Bone healing is a complex cascade of carefully regulated processes, including inflammation, progenitor cell recruitment, differentiation, and remodeling. The extensive role of chemokines in these processes and the known links between environmental contaminants and chemokine expression/activity leaves ample opportunity for disruption of bone healing by environmental factors. However, despite increased clinical awareness, the potential impact of many of these environmental factors on bone-related chemokines is still ill defined. A great deal of focus has been placed on environmental exposure to various endocrine disruptors (bisphenol A, phthalate esters, etc.), volatile organic compounds, dioxins, and heavy metals, though mainly in other tissues. Awareness of the impact of other less well-studied bone toxicants, such as fluoride, mold and fungal toxins, asbestos, and chlorine, is also reviewed. In many cases, the literature on these toxins in osteogenic models is lacking. However, research focused on their effects in other tissues and cell lines provides clues for where future resources could be best utilized. This review aims to serve as a current and exhaustive resource detailing the known links between several classes of high-interest environmental pollutants and their interaction with the chemokines relevant to bone healing.

Correlation of serum metal ion levels with pathological changes of ARMD in failed metal-on-metal-hip-resurfacing arthroplasties

BACKGROUND

Metal-on-metal-hip-resurfacing arthroplasties (MoMHRAs) have been associated with an increased failure rates due to an adverse-response-to-metal-debris (ARMD) associated with a spectrum of pathological features. Serum levels of cobalt (Co) and chromium (Cr) are used to assess MoMHRAs, with regard to ARMD, but it is not certain whether ion levels correlate with pathological changes in periprosthetic tissues.

METHODS

Serum Co and Cr levels were correlated with histological findings in 38 revised MoMHRAs (29 pseudotumour cases and 9 non-pseudotumour cases revised for pain). The extent of necrosis and macrophage infiltrate as well as the aseptic lymphocyte-dominated vasculitis-associated lesion (ALVAL) response was assessed semi-quantitatively; the prosthesis linear wear rate (PLWR) was also determined in ten cases.

RESULTS

Cr levels were elevated in 82% and Co levels elevated in 53% of cases; the PLWR correlated with Cr level (rho = 0.8, p = 0.006). Tissue necrosis and macrophage infiltration were noted in all, most of which also exhibited significant ALVAL. Although a discrete correlation was not seen between Co and/or Cr ion levels and the extent of necrosis, degree of macrophage infiltration, or ALVAL score, it was noted that cases with acceptable metal ions levels had high ALVAL score.

CONCLUSION

Histological features of both innate and adaptive immune response to metal wear are seen in periprosthetic tissues in cases with both elevated and non-elevated metal ion levels. MoMHRA failures with acceptable ion levels exhibited a pronounced ALVAL response. Although metal ion levels are elevated in most cases of MoMHRA failure due to ARMD, the finding of a normal metal ion level does not exclude this diagnosis.

Metal wear-induced pseudotumour following an endoprosthetic knee replacement for Ewing sarcoma

Pseudotumours are well recognised as a complication of metal-on-metal hip arthroplasties and are thought to develop on the basis of an innate and adaptive immune response to cobalt-chrome (Co-Cr) wear particles. We report a case of a large pseudotumour that developed following a knee endoprosthetic replacement (EPR) undertaken for Ewing sarcoma. The lesion contained necrotic and degenerate connective tissue in which there were numerous scattered metal wear-containing macrophages, eosinophil polymorphs, lymphocytes, plasma cells and aseptic lymphocyte-dominated vascular-associated lesion-like lymphoid aggregates. Metal ion levels were elevated. No evidence of infection or tumour was noted and it was concluded that the lesion was most likely an inflammatory pseudotumour developing on the basis of an innate and adaptive immune response to components of Co-Cr metal wear derived from the knee EPR.

Longitudinal Followup of Incidentally Detected Pseudotumors in Patients with Metal on Metal Implants: A Retrospective Study

BACKGROUND

This study describes the significance and temporal evolution of incidentally detected, presumed, metal-induced reactive periprosthetic masses in patients with metal on metal (MoM) hip arthroplasty and its management. The literature concerning the temporal evolution of these lesions is meagre and so it is still unclear, whether asymptomatic patients with periprosthetic collections should undergo revision.

MATERIALS AND METHODS

Patients with MoM hip replacements fitted with a recalled implant (ASR, DuPuy) often undergo magnetic resonance imaging with metal artifact reduction sequences to look for complications. From a cohort of 136 asymptomatic patients, with 181 MoM hips, hips with a mention of periprosthetic masses in their reports at first presentation, and a repeat scan within 6 months to 3 years were selected for this retrospective study. Patients with complications such as loosening, osteomyelitis, and muscle/tendon tears were excluded from the study, and the final study cohort consisted of 55 MoM hips and 61 periprosthetic masses. Ethics committee approval is not required in our institution for retrospective studies. The followup scans of each patient were compared, and the periprosthetic masses were described to have progressed, regressed, or remained unchanged.

RESULTS

Comparison revealed that 29 of the 61 reactive masses remained unchanged, 20 regressed, while only 12 showed progression. The study, therefore, has maximum power as the outcome of interest, i.e., regression or unchanged status of the pseudotumors, was seen in approximately 80% (more than half) of the study group. The P value of the study was < 0.005.

CONCLUSION

Periprosthetic soft tissue masses are not uncommon in patients with MoM hips. The majority of them in asymptomatic individuals remain stable or regress in the short to medium term, and close followup or decisions on revision surgery may not be warranted in asymptomatic patients.

Toxicity and oxidative stress responses induced by nano- and micro-CoCrMo particles

Particles on the nano- and micro-meter scales present unique cell-specific cellular effects (i.e.cytotoxicity and oxidative stress).

Adverse reactions to metal debris occur with all types of hip replacement not just metal-on-metal hips: a retrospective observational study of 3340 revisions for adverse reactions to metal debris from the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man

BACKGROUND

Adverse reactions to metal debris (ARMD) have resulted in the high short-term failure rates observed with metal-on-metal hip replacements. ARMD has recently been reported in non-metal-on-metal total hip replacements (non-MoM THRs) in a number of small cohort studies. However the true magnitude of this complication in non-MoM THRs remains unknown. We used a nationwide database to determine the risk of ARMD revision in all non-MoM THRs, and compared patient and surgical factors associated with ARMD revision between non-MoM and MoM hips.

METHODS

We performed a retrospective observational study using data from the National Joint Registry for England, Wales, Northern Ireland and the Isle of Man. All primary hip replacements undergoing revision surgery for ARMD were included (n = 3,340). ARMD revision risk in non-MoM THRs was compared between different commonly implanted bearing surfaces and femoral head sizes (Chi-squared test). Differences in patient and surgical factors between non-MoM hips and MoM hips revised for ARMD were also analysed (Chi-squared test and unpaired t-test).

RESULTS

Of all ARMD revisions, 7.5% (n = 249) had non-MoM bearing surfaces. The relative risk of ARMD revision was 2.35 times (95% CI 1.76-3.11) higher in ceramic-on-ceramic bearings compared with hard-on-soft bearings (0.055 vs. 0.024%; p < 0.001), and 2.80 times (95% CI 1.74-4.36) higher in 36 mm metal-on-polyethylene bearings compared to 28 mm and 32 mm metal-on-polyethylene bearings (0.058 vs. 0.021%; p < 0.001). ARMD revisions were performed earlier in non-MoM hips compared to MoM hips (mean 3.6-years vs. 5.6-years; p < 0.0001). Non-MoM hips had more abnormal findings at revision (63.1 vs. 35.7%; p < 0.001), and more intra-operative adverse events (6.4 vs. 1.6%; p < 0.001) compared to MoM hips.

CONCLUSIONS

Although the overall risk of ARMD revision surgery in non-MoM THRs appears low, this risk is increasing, and is significantly higher in ceramic-on-ceramic THRs and 36 mm metal-on-polyethylene THRs. ARMD may therefore represent a significant clinical problem in non-MoM THRs.

Revision rates for metal-on-metal hip resurfacing and metal-on-metal total hip arthroplasty - a systematic review

PURPOSE

To compare revision rates of metal-on-metal (MoM) hip resurfacing (HRS) and MoM total hip arthroplasty (THA), as well as the primary causes for revisions.

METHODS

The PubMed database was queried for potentially relevant articles addressing MoMTHA and MoMHRS, a total of 51 articles were included.

RESULTS

The review includes a total number of 5,399 MoMHRS and 3,244 THA prosthesis and the reasons for prosthesis failure were divided into 7 categories and the main causes discussed. The overall MoMTHA revision rate was 4.7% after 6.9 years. MoMHRS revision rate was 5.9% after 5.7 years. The odds ratio was 1.25 (1.03:1.53) 95% CI (p = 0.03) (MoMHRS vs. MoMTHA).The studies of hip prostheses were separated into 2 categories of short- and long-term (more or less than 5 years). Short-term revision rate for MoMTHA was 4.5% after 4.8 years, and for MoMHRS 4.0% after 4.2 years. The odds ratio was 1.09 (0.82:1.43) 95% CI (0 = 0.56) (MoMTHA vs. MoMHRS). Long-term revision rate for MoMTHA was 5.2% after 7.7 years and 8.2% after 7.6 years for MoMHRS. The odds ratio was 1.58 (1.53:1.96) 95% CI (p = 0.0001) (MoMHRS vs. MoMTHA).Revision causes were divided into 7 main categories. The most common cause for revision for both MoMTHA and MoMHRS was loosening 47.6% vs. 37.7%, fracture (MoMTHA 7.69%; MoMHRS 19.62%), metal reactions (MoMTHA 7.69%; MoMHRS 26.92%) infection (MoMTHA 12.08%; MoMHRS 6.54%), instability (MoMTHA 9.13%; MoMHRS 2.69%), manufacturer defect 6.73% for MoMTHA and nonreported for MoMHRS, and miscellaneous (MoMTHA 7.69%; MoMHRS 6.54%) was stated.

INTERPRETATION

The comparison of MoMHRS and MoMTHA revision rates showed no difference in the short term, however in the longer term, the revision rate of MoMHRS was significantly higher than for MoMTHA. The linear increase in revision rate of MoMHRS may indicate a progression in failure.

The Diagnosis of Infection in Metal-on-Metal Hip Arthroplasties

BACKGROUND

Distinction of aseptic from septic hip arthroplasty failure can be challenging. Some studies report an increased incidence of septic failure with metal-on-metal (MoM) hip arthroplasties. The Musculoskeletal Infection Society (MSIS) have formulated criteria to facilitate the diagnosis of periprosthetic joint infection (PJI). In this study, we determined the prevalence and histologic features of septic MoM hip failure.

METHODS

Overall, 104 cases of failed MoM hip arthroplasty, classified as septic or aseptic by MSIS microbiological criteria, were analyzed. The overall prevalence of septic failure was determined and the nature of the causative organisms noted. The extent of the neutrophil polymorph (NP) infiltrate in periprosthetic tissue in all cases was analyzed by hematoxylin-eosin and chloroacetate esterase staining.

RESULTS

The prevalence of septic MoM hip arthroplasty failure was 6.7%. Infective organisms were coagulase-negative Staphylococcus in 4 cases; Staphylococcus aureus, Streptococcus, and Propionibacterium species were isolated in the remaining cases. Chloroacetate esterase staining facilitated identification of NPs. All cases of PJI contained more than 5 NPs per high-power field (HPF) on average. Four cases of aseptic MoM implant failure contained scanty or scattered NPs (less than 5 per HPF on average).

CONCLUSION

The prevalence of PJI as a cause of MoM hip arthroplasty failure was relatively high compared to other hip bearing combinations; however, the organisms responsible were similar. Histologically, a minority of aseptic MoM implant failures contained some NPs, but the MSIS criteria for the histologic diagnosis of PJI (>5 NPs/HPF) correctly identified all microbiologically confirmed cases of septic failure.

Revision of Metal-on-metal Hip Arthroplasty with Well Fixed and Positioned Acetabular Component Using a Dual-mobility Head and Review of Literature

Background:

As a consequence of use of metal-on-metal hip arthroplasties some patients have precised revision for pain or metal hipersensivity reactions among other causes. We propose to salvage monoblock acetabular component and femoral component using a dual-mobility head and perform a lower morbidity operation in young patients preserving host bone stock in cases with well fixed and positioned components.

Objective:

(1) What clinical problems have been reported in patients with Metal-on-metal hip arthroplasties? (2) Could the tribocorrosion potentially cause a fracture of neck femoral component? (3) Can be the dual-mobility head a recourse in metal-on-metal hip revision?

Methods:

Ten patients were revised for pain or/and raised Cobalt/Chromium levels between August 2012 and December 2015. In three cases femoral neck component was fractured and femoral revision was necessary. In four hips, acetabular and femoral components could be maintained. Age, body index mass, ion levels, acetabular position, size of acetabular component and femoral head, approach, blood transfunsion and time of hospitalization were analized.

Results:

At a mean follow-up of 25,6 months (6 to 45) the mean postoperative HHS was 92. It was not statistically significant because several patients were low sintomatic before surgery, but had raised Cobalt/Chromium levels in the blood. All patients had near-normal levels of Cobalt/Chromium during the first 6 months after revision surgery. No relevant complications were reported.

Conclusion:

The use of dual-mobility head can be an acceptable option to revise metal-on-metal arthroplasties correctly oriented with abscence of loosening or infection signs and keeping bone stock in young patients.

Metal-on-Metal Total Hip Arthroplasty Associated with Adverse Local Tissue Reaction and Pseudoaneurysm of the Superior Gluteal Artery: A Case Report and Literature Review

Adverse local tissue reaction (ALTR) and pseudoaneurysm formation are rare but known complications following metal-on-metal hip total hip arthroplasty (THA). We report the first known case in the English literature of a concurrent unilateral ALTR and pseudoaneurysm of the superior gluteal artery in the same patient. Following minimal rise in serum metal ions, an ultrasound of the right hip demonstrated an avascular solid/cystic lesion anterolaterally in keeping with an ALTR. More posterolaterally, a second discrete thick-walled cystic lesion was identified. Doppler interrogation demonstrated a “yin yang” pattern suggestive of a pseudoaneurysm. Magnetic resonance imaging confirmed the presence of an anterolateral periarticular lesion with a second discrete lesion within the gluteus medius. Subsequent computed tomography angiography confirmed the presence of arterial contrast blush within the posterior gluteal lesion adjacent to the superior gluteal artery. The patient remains asymptomatic and is being managed conservatively. We review the imaging characteristics of ALTR and pseudoaneurysm occurring post-THA. When a complex solid/cystic lesion is encountered in a patient with a THA, radiologists must ensure that the lesion is interrogated with color Doppler to confidently distinguish a pseudotumor from a pseudoaneurysm. This information is vital to the surgeon to avoid unexpected hemorrhage if revision joint replacement surgery is being contemplated.

Result of Modular Necks in Primary Total Hip Arthroplasty with a Average Follow-up of Four Years

Purpose

This study aimed to investigate the outcomes of modular neck-utilization in primary total hip arthroplasty (THA).

Materials and Methods

Thirty patients (34 hips) who had modular stem THA between April 2011 and January 2013 were evaluated. There were 19 men and 11 women with a mean age of 61.2 years at the time of surgery. There were 20 cases of osteonecrosis of femoral head, 7 cases of osteoarthritis, 6 cases of femur neck fracture, and 1 case of rheumatoid arthritis. No patients presented with anatomical deformity of hip. Patients were operated on using a modified Watson-Jones anterolateral approach. All patients underwent clinical and radiological follow-up at 6 weeks, 3, 6, and 12 months, and every year postoperatively. The mean duration of follow-up was 48.2 months (range, 39 to 59 months).

Results

The average Harris hip score improved from 63.7 to 88.1 at the final follow-up. Radiographically, mean acetabular cup inclination was 45.3°(range, 36°-61°) and anteversion was 21.7°(range, 11°-29°). All were neutral-positioned stems except 5 which were varus-positioned stems. In only 3 cases (8.8%), varus or valgus necks were required. A case of linear femoral fracture occurred intraoperatively and 1 case of dislocation occurred at postoperative 2 weeks. No complications at modular junction were occurred.

Conclusion

Our study shows that the use of modular necks had favorable clinical and radiographic results. This suggests that the use of modular neck in primary THA without anatomical deformity is safe at a follow-up of 39 months.

Precision of acetabular cup placement in robotic integrated total hip arthroplasty

AIMS

The aim of this study was to assess the efficacy of stereotactic-arm assisted acetabular component placement during total hip arthroplasty (THA).

METHODS

120 patients underwent primary THA at 4 different medical centres. A preoperative pelvic CT protocol was used to plan socket placement followed by robotic-arm assisted acetabular preparation and cup insertion. Intraoperative cup position was recorded and postoperative placement measured using Martell suite analysis software.

RESULTS

Using a 95% predictive intervals, robotic-arm cup placement was within +/-4 degrees of planned position in 95% of cases. Applying these data to the so-called safe zone, 96% of sockets were within the defined safe zone. Our data confirms that intraoperative robotic assistance improves the precision of preparation and position of the acetabular cup during total hip arthroplasty.

Clinical and Wear Analyses of 9 Large Metal-on-Metal Total Hip Prostheses

Background

Metal-on-Metal (MoM) total hip arthroplasties (THA) are associated with pseudotumor formation and high revision rates. This prospective study analysed the clinical and wear analyses of 9 large Metal-on-Metal (MoM) total hip arthroplasties (THA) to understand the underlying mechanisms of failure. The MoM bearings were revised for multiple reasons; the main reason was pseudotumor formation.

Materials and Methods

From 2006 till 2010 the Reinier de Graaf Hospital implanted 160 large head M2a-Magnum™ (Biomet Inc. Warsaw, Indiana, USA) THAs in 150 patients. The first year, 9 bearings were revised and analysed at the Biomechanics Section, Hamburg University of Technology, Germany. We performed clinical (Harris Hip Score, radiographic analysis, blood cobalt and chromium) and wear analysis (implant, tissue and fluid) of the 9 bearings. Since this study did not fall under the scope of the Medical Research Involving Human Subjects Act in The Netherlands, no ethical approval was necessary. In this prospective study all patient details were anonymized by the corresponding author, all other authors were blinded during the research and wear analyses. Patients with bilateral MoM implants were excluded.

Results

The 9 bearings had a median (IQR) survival of 41.0 (25) months in situ. From these bearings, three showed no noticeable wear. The median (IQR) head wear volume was 3.2 (3.6) mm³ and maximum wear depth 0.02 (0.02) mm. For the cup the median (IQR) wear volume was 0.23 (0.3) mm³ with a maximum wear depth of 0.03 (0.05) mm.

Conclusion

An early identification of parameters related to failure of the MoM THA, such as pain, decreased range of motion, radiographic changes and high levels of blood cobalt and chromium is of great importance for patient’s quality of life. Especially now patients and surgeons face the long term effects of all these bearings still in situ. This study reports the clinical and wear analyses of 9 MoM THA. In the majority of this group the reason for revision was pseudotumor formation. Most bearings showed signs of wear, however with a great diversity in clinical analysis, in inclination angle, serum cobalt and chromium levels as well as wear analysis. For a better understanding of the underlying mechanisms related with failure, more wear analyses of revised MoM bearings are necessary as well as a frequent follow-up of the patients with a MoM bearing.

Cementless Total Hip Arthroplasty With Metasul Bearings Provides Good Results in Active Young Patients: A Concise Followup

BACKGROUND

A primary concern of younger, more active patients who have undergone total hip arthroplasty (THA) is the longevity of the implant. Cementless fixation and hard-on-hard bearings are recognized as options to enhance THA durability. Earlier, we published a series of 83 cementless primary THAs using 28-mm metal-on-metal (MoM) bearings in patients aged 50 years or younger; here we provide concise followup on that same group after an additional 8-year survey period.

QUESTIONS/PURPOSES

(1) What is the long-term survivorship of cementless primary THA using 28-mm MoM bearings in patients aged 50 years or younger? (2) What are the clinical and radiographic results of cementless THA in this active patient population? (3) Can any of the observed implant failures or adverse events be attributed to the metallic nature of the bearing couple?

METHODS

We retrospectively reviewed 83 cementless THAs performed in three institutions over a decade (1995-2004) in 68 patients with 28-mm MoM articulation. All patients (15 bilateral) had a median age of 42 years (range, 24-50 years) at the time of the index procedure and 56 of them (82% [70 hips]) had activity level graded Devane 4 or 5 before significant hip pain. A 28-mm Metasul™ articulation was used with an Alloclassic-SL™ cementless stem in all cases paired with three different cementless titanium acetabular components (one threaded and two press-fit cups) from the same manufacturer. Survivorship analysis was calculated according to Dobbs life table, patient clinical results were evaluated with use of the Postel-Merle d'Aubigné scoring system, radiographic analysis was performed by independent observers, and cobalt level was determined in whole blood.

RESULTS

The 15-year survivorship (33 hips at risk) for revision for any reasons (four hips) and for aseptic loosening (one hip) was 96% (95% confidence interval [CI], 81%-99%) and 99% (95% CI, 85%-99.9%), respectively. The median Merle d'Aubigné-Postel score remained stable at 17 points (range, 10-18). Thus far, we have not observed pseudotumors or other adverse reactions to metallic debris. Eight hips have undergone reoperation: trochanteric suture removal (one), psoas tendon impingement (two), and five revisions for periprosthetic fracture (one), late infection (two), acetabular osteolysis (one, as a result of polyethylene backside wear), and one hydroxyapatite-coated cup for aseptic loosening. None of the complications, failures, or revisions observed so far could directly be related to the metallic nature of the 28-mm Metasul bearings used in this selected group of patients.

CONCLUSIONS

The current survey at 13-year median followup has not yet indicated any long-term deleterious effects related to dissemination of metallic ions. Two senior authors continue to use 28- or 32-mm Metasul™ bearings with cementless THA components in young and active patient populations. Longer followup with a more sophisticated imaging study is necessary to confirm this so far positive report.

LEVEL OF EVIDENCE

Level IV, therapeutic study.

Cytotoxicity and genotoxicity in liver cells induced by cobalt nanoparticles and ions

Objectives

The cytotoxicity induced by cobalt ions (Co²⁺) and cobalt nanoparticles (Co-NPs) which released following the insertion of a total hip prosthesis, has been reported. However, little is known about the underlying mechanisms. In this study, we investigate the toxic effect of Co²⁺ and Co-NPs on liver cells, and explain further the potential mechanisms.

Methods

Co-NPs were characterised for size, shape, elemental analysis, and hydrodynamic diameter, and were assessed by Transmission Electron Microscope, Scanning Electron Microscope, Energy Dispersive X-ray Spectroscopy and Dynamic Light Scattering. BRL-3A cells were used in this study. Cytotoxicity was evaluated by MTT and lactate dehydrogenase release assay. In order to clarify the potential mechanisms, reactive oxygen species, Bax/Bcl-2 mRNA expression, IL-8 mRNA expression and DNA damage were assessed on BRL-3A cells after Co²⁺ or Co-NPs treatment.

Results

Results showed cytotoxic effects of Co²⁺ and Co-NPs were dependent upon time and dosage, and the cytotoxicity of Co-NPs was greater than that of Co²⁺. In addition, Co-NPs elicited a significant (p < 0.05) reduction in cell viability with a concomitant increase in lactic dehydrogenase release, reactive oxygen species generation, IL-8 mRNA expression, Bax/Bcl-2 mRNA expression and DNA damage after 24 hours of exposure.

Conclusion

Co-NPs induced greater cytotoxicity and genotoxicity in BRL-3A cells than Co²⁺. Cell membrane damage, oxidative stress, immune inflammation and DNA damage may play an important role in the effects of Co-NPs on liver cells.

Cite this article: Y. K. Liu, X. X. Deng, H.L. Yang. Cytotoxicity and genotoxicity in liver cells induced by cobalt nanoparticles and ions. Bone Joint Res 2016;5:461–469. DOI: 10.1302/2046-3758.510.BJR-2016-0016.R1.

Hard-on-Hard Bearings Are Associated With Increased Noise Generation in Young Patients Undergoing Hip Arthroplasty

BACKGROUND

Patient-perceived noise from prostheses after total hip arthroplasty (THA) does occur, yet questions remain including the overall frequency of this finding, demographic and prosthesis-related factors, and the association of noise generation with patient-reported outcomes.

QUESTIONS/PURPOSES

The purposes of this study were (1) to determine the frequency with which patients report noise coming from the hip after THA; (2) to identify patient and prosthesis-related factors associated with noise generation; and (3) to ascertain if noise generation is associated with pain or functional impairment after THA.

METHODS

A five-center study was designed to quantify the degree of residual symptoms and functional deficits in patients undergoing THA. Three centers were academic practices, whereas two centers were private practices that provided training programs for orthopaedic residents and fellows. Each contributing surgeon was fellowship-trained and specialized in joint replacement. Inclusion criteria for this study were (1) men between 18 and 60 years old and women between 18 and 55 years old; (2) patients requiring primary hip surgery as a result of noninflammatory arthritis such as osteoarthritis, traumatic arthritis, or avascular necrosis; (3) a UCLA activity score of 6 or more before they were limited by pain; and (4) patients who had undergone a primary THA within 1 to 4 years before the start of the study and had a minimum of 1 year of clinical followup. Attempts were made to contact all identified patients meeting these inclusion criteria. Data were collected by an independent, third-party survey center blinded to the implant design and bearing surface used who administered questionnaires about residual symptoms, function, and pre- and postoperative activity levels using previously published survey instruments. Patients were specifically queried regarding perceived noise from their THA. We retrospectively identified 1242 eligible patients. Of the 1242 patients, 105 were found to have exclusions during the screening section of the questionnaire: postoperative infection (six THAs), fracture (two), dislocation (seven), or revision (17); limited activity level because of an operation on the opposite hip (34); and premorbid UCLA score of less than 6 (39). In addition, 128 individuals refused to participate, 156 were never available, 108 were not found as a result of a bad address/phone number, 48 were contacted but did not complete the interview, nine had died, and six had a language barrier. This left 682 of the 1137 eligible patients with completed surveys (60% response rate). The mean age was 50 ± 8 years at the time of surgery with 63% being men, and they were contacted at a mean of 3 ± 1 years postoperatively. Bearing surfaces (femoral head-acetabular liner) included 210 (31%) metal-on-metal, 144 (21%) ceramic-on-ceramic, 142 (21%) ceramic-on-polyethylene, 141 (21%) cobalt-chromium-on-polyethylene, and 44 (6%) oxidized zirconium-on-polyethylene. Differences in baseline demographic variables were accounted for using multiple logistic regression statistical analyses. Pearson's correlation coefficients were used to determine the association of noise generation with residual symptoms.

RESULTS

Overall, 9% (61 of 682; 95% confidence interval [CI], 7-11) of young patients undergoing primary THA reported noise generation. Females (12% [30 of 251 patients]) were noted to have an increased likelihood of reporting noise versus males (7% [30 of 431 patients]; odds ratio, 1.8; 95% CI, 1.1-3.1; p = 0.03). After controlling for potential confounding variables including female sex and length of followup, patients receiving a ceramic-on-ceramic or metal-on-metal bearing surface (14% [50 of 355]) reported an increased frequency of grinding, popping, and clicking in the 30 days before survey administration versus those receiving a polyethylene liner with a ceramic, oxidized zirconium, or cobalt-chromium femoral head (3% [10 of 327 patients]; odds ratio, 5.6; 95% CI, 2.7-11.5; p < 0.001). Noise generation was associated with increased pain (r = 0.23, p < 0.001) and stiffness (r = 0.22, p < 0.001) after THA.

CONCLUSIONS

When interviewed by an independent third party, patients receiving a metal-on-metal or ceramic-on-ceramic bearing reported a higher frequency of noise generation versus patients receiving a polyethylene liner after THA. Young patients undergoing THA should be counseled that noise generation could be associated with increased pain after THA.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Advanced metal artifact reduction MRI of metal-on-metal hip resurfacing arthroplasty implants: compressed sensing acceleration enables the time-neutral use of SEMAC

OBJECTIVE

Compressed sensing (CS) acceleration has been theorized for slice encoding for metal artifact correction (SEMAC), but has not been shown to be feasible. Therefore, we tested the hypothesis that CS-SEMAC is feasible for MRI of metal-on-metal hip resurfacing implants.

MATERIALS AND METHODS

Following prospective institutional review board approval, 22 subjects with metal-on-metal hip resurfacing implants underwent 1.5 T MRI. We compared CS-SEMAC prototype, high-bandwidth TSE, and SEMAC sequences with acquisition times of 4-5, 4-5 and 10-12 min, respectively. Outcome measures included bone-implant interfaces, image quality, periprosthetic structures, artifact size, and signal- and contrast-to-noise ratios (SNR and CNR). Using Friedman, repeated measures analysis of variances, and Cohen's weighted kappa tests, Bonferroni-corrected p-values of 0.005 and less were considered statistically significant.

RESULTS

There was no statistical difference of outcomes measures of SEMAC and CS-SEMAC images. Visibility of implant-bone interfaces and pseudocapsule as well as fat suppression and metal reduction were "adequate" to "good" on CS-SEMAC and "non-diagnostic" to "adequate" on high-BW TSE (p < 0.001, respectively). SEMAC and CS-SEMAC showed mild blur and ripple artifacts. The metal artifact size was 63 % larger for high-BW TSE as compared to SEMAC and CS-SEMAC (p < 0.0001, respectively). CNRs were sufficiently high and statistically similar, with the exception of CNR of fluid and muscle and CNR of fluid and tendon, which were higher on intermediate-weighted high-BW TSE (p < 0.005, respectively).

CONCLUSION

Compressed sensing acceleration enables the time-neutral use of SEMAC for MRI of metal-on-metal hip resurfacing implants when compared to high-BW TSE and image quality similar to conventional SEMAC.

Leukocyte Esterase: Metal-on-Metal Failure and Periprosthetic Joint Infection

BACKGROUND

Adverse local tissue reactions (ALTRs) and periprosthetic joint infection can occur after metal-on-metal total hip arthroplasty (THA), both potentially generating purulent synovial fluid (SF) and elevated white cell count. This makes it difficult to distinguish between diagnoses; therefore, we evaluated leukocyte esterase (LE) strip test's reliability in ruling out periprosthetic joint infection in ALTR revision THA.

METHODS

Sixty-one patients with ALTRs and an LE strip test were evaluated, excluding 15 cases with SF metallic debris. LE strip tests were classified -/trace, + (mildly positive), and ++ (strongly positive).

RESULTS

LE strip tests were ++, +, -/trace in 8 patients (13.1%), 14 (23.0%), and 39 (63.9%), respectively. Means and ranges of SF white cell count and polymorphonuclear percentage were 1291.4 (0-10,886 cells/μL), and 46.1% (0%-94%), respectively.

CONCLUSION

++ LE strip test, in conjunction with preoperative work-ups, reliably rules out infection in 92.9% of patients undergoing THA revision secondary to ALTR.

Halo and spillover effect illustrations for selected beneficial medical devices and drugs

BACKGROUND

Negative news media reports regarding potential health hazards of implanted medical devices and pharmaceuticals can lead to a 'negative halo effect,' a phenomenon whereby judgments about a product or product type can be unconsciously altered even though the scientific support is tenuous. To determine how a 'negative halo effect' may impact the rates of use and/or explantation of medical products, we analyzed the occurrence of such an effect on three implanted medical devices and one drug: 1) intrauterine contraceptive devices (IUDs); 2) silicone gel-filled breast implants (SGBI); 3) metal-on-metal hip implants (MoM); and 4) the drug Tysabri.

METHODS

Data on IUD use from 1965 to 2008 were gathered from the Department of Health and Human Services Vital and Health Statistics and peer-reviewed publications. Data regarding SGBI implant and explantation rates from 1989 to 2012 were obtained from the Institute of Medicine and the American Society of Plastic Surgeons. MoM implant and explantation data were extracted from the England and Wales National Joint Registry and peer-reviewed publications. Tysabri patient data were reported by Elan Corporation or Biogen Idec Inc. Data trends for all products were compared with historical recall or withdrawal events and discussed in the context of public perceptions following such events.

RESULTS

We found that common factors altered public risk perceptions and patterns of continued use. First, a negative halo effect may be driven by continuing patient anxiety despite positive clinical outcomes. Second, negative reports about one product can spill over to affect the use of dissimilar products in the same category. Third, a negative halo effect on an entire category of medical devices can be sustained regardless of the scientific findings pertaining to safety. Fourth, recovery of a product's safety reputation and prevalent use may take decades in the U.S., even while these products may exhibit widespread use and good safety records in other countries.

CONCLUSIONS

We conclude that the 'negative halo effect' associated with a stigma, rather than an objective risk-benefit assessment of medical products can increase negative health outcomes for patients due to reduced or inappropriate product usage.

Blood metal ion levels are not a useful test for adverse reactions to metal debris: A systematic review and meta-analysis

Objectives

Alarm over the reported high failure rates for metal-on-metal (MoM) hip implants as well as their potential for locally aggressive Adverse Reactions to Metal Debris (ARMDs) has prompted government agencies, internationally, to recommend the monitoring of patients with MoM hip implants. Some have advised that a blood ion level >7 µg/L indicates potential for ARMDs. We report a systematic review and meta-analysis of the performance of metal ion testing for ARMDs.

Methods

We searched MEDLINE and EMBASE to identify articles from which it was possible to reconstruct a 2 × 2 table. Two readers independently reviewed all articles and extracted data using explicit criteria. We computed a summary receiver operating curve using a Bayesian random-effects hierarchical model.

Results

Our literature search returned 575 unique articles; only six met inclusion criteria defined a priori. The discriminative capacity of ion tests was homogeneous across studies but that there was substantial cut-point heterogeneity. Our best estimate of the “true” area under curve (AUC) for metal ion testing is 0.615, with a 95% credible interval of 0.480 to 0.735, thus we can state that the probability that metal ion testing is actually clinically useful with an AUC ≥ 0.75 is 1.7%.

Conclusion

Metal ion levels are not useful as a screening test for identifying high risk patients because ion testing will either lead to a large burden of false positive patients, or otherwise marginally modify the pre-test probability. With the availability of more accurate non-invasive tests, we did not find any evidence for using blood ion levels to diagnose symptomatic patients.

Cite this article: M. Pahuta, J. M. Smolders, J. L. van Susante, J. Peck, P. R. Kim, P. E. Beaule. Blood metal ion levels are not a useful test for adverse reactions to metal debris: a systematic review and meta-analysis. Bone Joint Res 2016;5:379–386. DOI: 10.1302/2046-3758.59.BJR-2016-0027.R1.

The histological and elemental characterisation of corrosion particles from taper junctions

OBJECTIVES

This study aimed to characterise and qualitatively grade the severity of the corrosion particles released into the hip joint following taper corrosion.

METHODS

The 26 cases examined were CoC/ABG Modular (n = 13) and ASR/SROM (n = 13). Blood serum metal ion levels were collected before and after revision surgery. The haematoxylin and eosin tissue sections were graded on the presence of fibrin exudates, necrosis, inflammatory cells and corrosion products. The corrosion products were identified based on visible observation and graded on abundance. Two independent observers blinded to the clinical patient findings scored all cases. Elemental analysis was performed on corrosion products within tissue sections. X-Ray diffraction was used to identify crystalline structures present in taper debris.

RESULTS

The CoC/ABG Modular patients had a mean age of 64.6 years (49.4 to 76.5) and ASR/SROM patients had a mean age of 58.2 years (33.3 to 85.6). The mean time in situ for CoC/ABG was 4.9 years (2 to 6.4) and ASR/SROM was 6.1 years (2.5 to 8.1). The blood serum metal ion concentrations reduced following revision surgery with the exception of Cr levels within CoC/ABG. The grading of tissue sections showed that the macrophage response and metal debris were significantly higher for the ASR/SROM patients (p < 0.001). The brown/red particles were significantly higher for ASR/SROM (p < 0.001). The taper debris contained traces of titanium oxide, chromium oxide and aluminium nitride.

CONCLUSION

This study characterised and qualitatively graded the severity of the corrosion particles released into the hip joint from tapers that had corrosion damage.Cite this article: S. Munir, R. A. Oliver, B. Zicat, W. L. Walter, W. K. Walter, W. R. Walsh. The histological and elemental characterisation of corrosion particles from taper junctions. Bone Joint Res 2016;5:370-378. DOI: 10.1302/2046-3758.59.2000507.

Early Outcomes Following Metal-on-Metal Reverse Total Shoulder Arthroplasty in Patients Younger Than 50 Years

Reverse total shoulder arthroplasty (TSA) is a useful intervention for older patients with glenohumeral arthritis and a deficient rotator cuff. However, as a semiconstrained prosthesis, conventional reverse TSA implanted in a young patient could fail over time secondary to polyethylene wear and subsequent osteolysis. A metal-on-metal prosthesis may avoid this type of failure. The purpose of this study is to assess the outcomes in an initial cohort of young patients who underwent reverse TSA using a metal-on-metal prosthesis. Surgical indications included age younger than 50 years with a functioning deltoid and significant impairment of shoulder function with irreparable rotator cuff due to tumor resection, arthritis, or revision surgery. Nine patients with an average age of 37 years underwent implantation of a custom metal-on-metal reverse TSA prosthesis. All patients had a minimum 12-month follow-up or a failure of their procedure requiring revision surgery prior to 1 year. American Shoulder and Elbow Surgeons (ASES) scores, Constant scores, and range of motion were recorded and analyzed pre- and postoperatively to assess improvement, and all complications were noted. Average ASES score improved from 47 points preoperatively to 73.4 points postoperatively (P=.013). Average Constant and adjusted Constant scores improved from 20.8 points and 16% preoperatively to 61.8 points and 67.3% postoperatively, respectively (P=.019 and P=.068). Mean postoperative active forward flexion and active external rotation were 119.4° and 10°, respectively. Complications included the following: 3 patients sustained a postoperative dislocation, 1 patient had a glenoid fracture and complete loss of fixation of the baseplate, and 1 patient experienced dissociation of the glenosphere from the base-plate. Although metal-on-metal reverse TSA may appear to be an attractive choice in the treatment of young patients with limited reconstructive options, postoperative outcomes are disappointing, and the complication rate is high. [Orthopedics.2016; 39(5):e957-e961.].

Quantitative in vivo biocompatibility of new ultralow-nickel cobalt-chromium-molybdenum alloys

Nickel (Ni) eluted from metallic biomaterials is widely accepted as a major cause of allergies and inflammation. To improve the safety of cobalt-chromium-molybdenum (Co-Cr-Mo) alloy implants, new ultralow-Ni Co-Cr-Mo alloys with and without zirconium (Zr) have been developed, with Ni contents of less than 0.01%. In the present study, we investigated the biocompatibility of these new alloys in vivo by subcutaneously implanting pure Ni, conventional Co-Cr-Mo, ultralow-Ni Co-Cr-Mo, and ultralow-Ni Co-Cr-Mo with Zr wires into the dorsal sides of mice. After 3 and 7 days, tissues around the wire were excised, and inflammation; the expression of IL-1β, IL-6, and TNF-α; and Ni, Co, Cr, and Mo ion release were analyzed using histological analyses, qRT-PCR, and inductively coupled plasma mass spectrometry (ICP-MS), respectively. Significantly larger amounts of Ni eluted from pure Ni wires than from the other wires, and the degree of inflammation depended on the amount of eluted Ni. Although no significant differences in inflammatory reactions were identified among new alloys and conventional Co-Cr-Mo alloys in histological and qRT-PCR analyses, ICP-MS analysis revealed that Ni ion elution from ultralow-Ni Co-Cr-Mo alloys with and without Zr was significantly lower than from conventional Co-Cr-Mo alloys. Our study, suggests that the present ultralow-Ni Co-Cr-Mo alloys with and without Zr have greater safety and utility than conventional Co-Cr-Mo alloys. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1505-1513, 2016.

Is Metal-On-Metal Total Hip Arthroplasty Associated With Neurotoxicity?

BACKGROUND

Isolated case reports in the literature describe systemic neurologic side effects associated with metal-on-metal (MOM) bearing surfaces, yet the incidence of these effects have not been evaluated beyond individual cases. The purpose of this study was to compare new diagnoses of these side effects described in isolated cases in large patient cohorts of MOM vs metal on polyethylene (MOP).

METHODS

We queried the entire Medicare database from 2005 to 2012. Total hip arthroplasty (THA) and bearing surface were determined using International Classification of Diseases, 9th revision procedure codes. Patients with 5-year follow-up were selected. Using International Classification of Diseases, 9th revision codes, we identified new diagnoses of previously reported neurologic side effects: peripheral neuropathy, sensorineural hearing loss, visual impairment, paresthesias, tinnitus, and vertigo. Comorbidities and demographics were collected. Odds ratios, CIs, and P values were calculated.

RESULTS

Overall, 29,483 MOM THAs and 23,587 age- and gender-matched MOP THAs were identified. The average Charlson Comorbidity Index was 5 for both groups. MOM and MOP patients had 26 of 30 identical prevalence of Elixhauser-measure comorbidities. There was no statistically significant difference in new diagnoses of any of the side effects at any time point between the 2 groups over 5 years.

CONCLUSION

This study represents, to our knowledge, the first longitudinal analysis of systemic neurotoxicity after THA in a large cohort of patients. The results of our study suggest that on the large scale, neurologic side effects previously described do not occur as a common attributable complication. Rather, these cases may be due to individual patient hypersensitivity to metal ions.

Allergy in total knee arthroplasty: a review of the facts

We explored the literature surrounding whether allergy and hypersensitivity has a clinical basis for implant selection in total knee arthroplasty (TKA). In error, the terms hypersensitivity and allergy are often used synonymously. Although a relationship is present, we could not find any evidence of implant failure due to allergy. There is however increasing basic science that suggests a link between loosening and metal ion production. This is not an allergic response but is a potential problem. With a lack of evidence logically there can be no justification to use 'hypoallergenic' implants in patients who have pre-existing skin sensitivity to the metals used in TKA.

Growth of an intrapelvic pseudotumor associated with a metal-on-metal total hip arthroplasty after revision arthroplasty causing a femoral nerve neuropathy

The development of pseudotumors is not uncommon with metal-on-metal total hip arthroplasty. Pseudotumors that dissect into the retroperitoneal space can cause symptoms of nerve compression. We describe a case of a 53-year-old male with a metal-on-metal total hip arthroplasty who developed mild symptoms of a femoral nerve neuropathy 6 years postoperatively. Revision arthroplasty to a ceramic-on-polyethylene articulation and debridement of the pseudotumor was performed. Postoperatively, the patient's femoral neuropathy progressed and a repeat magnetic resonance imaging showed an increase in size of the pseudotumor despite the removal of the offending metal-on-metal articulation. The patient subsequently underwent a laparoscopic excision of the retroperitoneal pseudotumor. By 17 months post laparoscopic excision of the pseudotumor, the patient's motor deficits resolved, however, sensory deficits persisted in the anteromedial thigh.

The induction of CXCR4 expression in human osteoblast-like cells (MG63) by CoCr particles is regulated by the PLC-DAG-PKC pathway

BACKGROUND

Osteolysis which leads to aseptic loosening of implants is a fundamental problem in joint replacement surgery (arthroplasty) and the leading cause for implant failure and revision surgery. Metal (CoCr) particles separated from implants by wear cause osteolysis and the failure of orthopedic implants, but the molecular mechanism is not clear. The chemokine receptor CXCR4 has been shown to play a pivotal role in periprosthetic osteolysis. The aim of this study was to determine which signal transduction pathway (PLC-DAG-PKC or MAPK/ERK) induces CXCR4 expression in osteoblast-like cells (MG63) cells.

METHODS

MG63 and Jurkat cells were stimulated with different amounts of particles (10⁷ , 10⁶ , and 10⁵ ) for different time periods (30 min to 24 h), in the presence and absence of specific inhibitors (chelerythrine for the PLC-DAG-PKC pathway and PD98059 for the MAPK/ERK pathway). The expression of CXCR4-specific mRNA was determined by real-time polymerase chain reaction (PCR), and the PKC activity was measured by Western Blot using an antibody specific for PKC-related phosphorylation.

RESULTS

Real-time PCR data showed that CXCR4 mRNA expression in MG63 cells induced by CoCr particles was significantly diminished by the PKC-specific inhibitor chelerythrine. This effect was not observed with the MAPK/ERK inhibitor PD98059. The involvement of PKC was also confirmed by an intensified phosphorylation pattern after stimulation with CoCr particles. In Jurkat cells, none of the inhibitors exhibited any effect.

CONCLUSION

The induction of CXCR4-specific mRNA expression in MG63 cells after stimulation with CoCr particles is regulated by the PLC-DAG-PKC pathway and not by the MAPK/ERK pathway. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2326-2332, 2017.

Metal Ion Levels Are Not Correlated With Histopathology of Adverse Local Tissue Reactions in Taper Corrosion of Total Hip Arthroplasty

BACKGROUND

The underlying biological mechanism in the formation of adverse local tissue reaction in taper corrosion of total hip arthroplasty (THA) remains unknown. This study evaluated whether there was a dose-dependent relationship between metal ion levels, intraoperative tissue damage and ALVAL (aseptic lymphocyte-dominated vasculitis-associated lesion) scores in dual taper THA patients who underwent revisions for taper corrosion.

METHODS

We performed a retrospective review of 31 dual taper THA patients who underwent revision surgery from May 2013 to October 2013. Preoperative serum metal ion levels, intraoperative tissue damage grading, and ALVAL scores were reviewed. Multivariate analysis was performed to determine if an association existed between metal ion levels, intraoperative tissue damage, and ALVAL scores.

RESULTS

Findings consistent with adverse local tissue reaction were found in all cases. We noted 10 patients with low, 8 with moderate, and 13 with high ALVAL scores, respectively. For intraoperative tissue damage, we recorded 2 (grade 1), 22 (grade 2) and 7 (grade 3) cases. Preoperatively, there was preferential elevation of serum cobalt (3.8 ng/mL, 2.3-17.0) compared to serum chromium (1.0 ng/mL, 0.2-5.8). There was no correlation between preoperative metal ion levels and intraoperative tissue damage (R = -0.06, P = .74) or ALVAL scores (R = -0.04, P = .481). There was also no correlation between intraoperative tissue damage and ALVAL score (R = -0.06, P = .73).

CONCLUSION

There was no significant correlation between ALVAL scores and prerevision surgery metal ion levels or intraoperative tissue damage, suggesting that the biological mechanism of histologic morphology cannot be solely attributed to elevated metal ion levels and is likely multifactorial, reflecting a complex interplay between implant and patient factors.

Ballooning osteolysis in 71 failed total ankle arthroplasties

Background and purpose - Aseptic loosening is a major cause of failure in total ankle arthroplasty (TAA). In contrast to other total joint replacements, large periarticular cysts (ballooning osteolysis) have frequently been observed in this context. We investigated periprosthetic tissue responses in failed TAA, and performed an element analysis of retrieved tissues in failed TAA. Patients and methods - The study cohort consisted of 71 patients undergoing revision surgery for failed TAA, all with hydroxyapatite-coated implants. In addition, 5 patients undergoing primary TAA served as a control group. Radiologically, patients were classified into those with ballooning osteolysis and those without, according to defined criteria. Histomorphometric, immunohistochemical, and elemental analysis of tissues was performed. Von Kossa staining and digital microscopy was performed on all tissue samples. Results - Patients without ballooning osteolysis showed a generally higher expression of lymphocytes, and CD3+, CD11c+, CD20+, and CD68+ cells in a perivascular distribution, compared to diffuse expression. The odds of having ballooning osteolysis was 300 times higher in patients with calcium content >0.5 mg/g in periprosthetic tissue than in patients with calcium content ≤0.5 mg/g (p < 0.001). Interpretation - There have been very few studies investigating the pathomechanisms of failed TAA and the cause-effect nature of ballooning osteolysis in this context. Our data suggest that the hydroxyapatite coating of the implant may be a contributory factor.

Corrosion at the Head-Neck Junction: Why Is This Happening Now?

While mechanically-assisted crevice corrosion (MACC) at the head/neck junction of modular total hip arthroplasty (THA) femoral components was first described over two decades ago, it is only within the last few years that investigators have observed that adverse local tissue reactions (ALTRs) associated with MACC are an increasingly prevalent mode of failure of contemporary THAs. As yet, the incidence, etiology and pathogenesis of MACC-associated ALTR are not well understood. In this review, possible implant-, patient-, and surgeon-related factors are considered in the context of a small but growing body of evidence from laboratory simulations, implant and tissue retrieval studies and clinical case series. It is likely that MACC-associated ALTR is a multifactorial process and that ongoing research will lead to multiple strategies that will facilitate early diagnosis and ultimately prevention of the adverse clinical sequelae of this phenomenon.

Hip resurfacing and pseudotumour

Metal on metal hip resurfacing has been used widely over the last ten years but there has been recent concern about destructive soft tissue reactions, which have been called pseudotumours by some authors. This has generated considerable controversy. This review explains why pseudotumours occur after resurfacing and how they can be prevented. It also supports the continued use of resurfacing in appropriate patients by appropriately trained surgeons.

Hip resurfacing: history, current status, and future

Hip resurfacing arthroplasty (HRA) presents several advantages over conventional total hip arthroplasty (THA), including conservation and preservation of bone, reduced risk of dislocation, easy replication of hip biomechanics and easy revision if needed. It is a particularly appealing procedure for young patients. HRA has been performed for over 40 years following the same technological advances as THA. The bearing material used by most designs is metal-on-metal (MoM), which has the best compromise between strength and wear properties. However, MoM HRA has a specific set of possible complications. Aseptic femoral failures were initially the most prevalent cause for revision but progress in patient selection and surgical technique seem to have resolved this problem. Wear-related failures (high metal ion levels and adverse local tissue reactions) are now the main concern, and are essentially associated with poor acetabular component design and orientation, to which MoM is more sensitive than other bearing materials. The concept of functional coverage is key to understanding how MoM bearings are affected by edge wear. Only a 3-D assessment of cup position (e.g., the contact patch to rim distance) provides the necessary information to determine the role of cup positioning in relationship with abnormal bearing wear.The concept of hip resurfacing is more valid today than ever as the age of the patients in need of hip arthroplasty keeps getting lower. The recent publication of several excellent long-term survivorship results suggests that selection of a well-designed resurfacing system and accuracy in the placement of the cup can achieve long-term durability.

The biological response to orthopaedic implants for joint replacement: Part I: Metals

Joint replacement is a commonly performed, highly successful orthopaedic procedure, for which surgeons have a large choice of different materials and implant designs. The materials used for joint replacement must be both biologically acceptable to minimize adverse local tissue reactions, and robust enough to support weight bearing during common activities of daily living. Modern joint replacements are made from metals and their alloys, polymers, ceramics, and composites. This review focuses on the biological response to the different biomaterials used for joint replacement. In general, modern materials for joint replacement are well tolerated by the body as long as they are in bulk (rather than in particulate or ionic) form, are mechanically stable and noninfected. If the latter conditions are not met, the prosthesis will be associated with an acute/chronic inflammatory reaction, peri-prosthetic osteolysis, loosening and failure. This article (Part 1 of 2) is dedicated to the use of metallic devices in orthopaedic surgery including the associated biological response to metallic byproducts is a review of the basic science literature regarding this topic. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2162-2173, 2017.

The Inflammatory Phenotype in Failed Metal-On-Metal Hip Arthroplasty Correlates with Blood Metal Concentrations

INTRODUCTION

Hip arthroplasty is the standard treatment of a painful hip destruction. The use of modern metal-on-metal (MOM) bearing surfaces gained popularity in total hip arthroplasties during the last decade. Recently, worrisome failures due to adverse reaction to metal debris (ARMD), including pseudotumor response, have been widely reported. However, the pathogenesis of this reaction remains poorly understood. The aim of the present study was to investigate the ARMD response by flow cytometry approach.

METHODS

Sixteen patients with a failed Articular Surface Replacement (ASR) hip prosthesis were included in the study. Samples of pseudotumor tissues collected during revision surgery were degraded by enzyme digestion and cells were typed by flow cytometry. Whole blood chromium and cobalt concentrations were analyzed with mass spectrometry before revision surgery.

RESULTS

Flow cytometry analysis showed that the peri-implant pseudotumor tissue expressed two principal phenotypes, namely macrophage-dominated and T-lymphocyte-dominated response; the average portions being 54% (macrophages) and 25% (T-lymphocytes) in macrophage-dominated inflammation and 20% (macrophages) and 54% (T-lymphocytes) in T-lymphocyte-dominated response. The percentages of B-lymphocytes and granulocytes were lower in both phenotypes. Interestingly, the levels of blood chromium and cobalt were significantly higher in patients with macrophage-dominated response.

CONCLUSIONS

The results suggest that the adverse tissue reactions induced by MOM wear particles contain heterogeneous pathogeneses and that the metal levels are an important factor in the determination of the inflammatory phenotype. The present results support the hypothesis that higher metal levels cause cytotoxicity and tissue injury and macrophages are recruited to clear the necrotic debris. On the other hand, the adverse response developed in association with lower metal levels is T-lymphocyte-dominated and is likely to reflect hypersensitivity reaction.

Immune response in adverse reactions to metal debris following metal-on-metal total hip arthroplasty

BACKGROUND

The purpose of the present study was to determine whether T cell-mediated type IV hypersensitivity reactions could be a major cause of adverse reaction to metal debris (ARMD) after metal-on-metal total hip arthroplasty (THA).

METHODS

Thirteen patients (1 man and 12 women; mean age 68 years, age range 60 to 83 years) with ARMD underwent revision surgery following metal-on-metal THA (15 hips). Lymphocyte stimulation testing was conducted. Periprosthetic tissue specimens underwent immunohistochemical studies.

RESULTS

Lymphocyte stimulation testing showed that five patients were nickel-sensitive, and one patient was also cobalt-sensitive. Immunohistochemical studies showed that T cells were dominant in five hips, and B cells were dominant in 10 hips. In four of the five patients with a positive lymphocyte stimulation test, the dominant lymphocytes were T cells, suggesting type IV hypersensitivity. The major cause of ARMD was not type IV hypersensitivity in the remaining nine patients.

CONCLUSION

Metal hypersensitivity does not appear to be the dominant biological reaction involved in the occurrence of ARMD.

The pathobiology and pathology of aseptic implant failure

Pathological assessment of periprosthetic tissues is important, not only for diagnosis, but also for understanding the pathobiology of implant failure. The host response to wear particle deposition in periprosthetic tissues is characterised by cell and tissue injury, and a reparative and inflammatory response in which there is an innate and adaptive immune response to the material components of implant wear. Physical and chemical characteristics of implant wear influence the nature of the response in periprosthetic tissues and account for the development of particular complications that lead to implant failure, such as osteolysis which leads to aseptic loosening, and soft-tissue necrosis/inflammation, which can result in pseudotumour formation. The innate response involves phagocytosis of implant-derived wear particles by macrophages; this is determined by pattern recognition receptors and results in expression of cytokines, chemokines and growth factors promoting inflammation and osteoclastogenesis; phagocytosed particles can also be cytotoxic and cause cell and tissue necrosis. The adaptive immune response to wear debris is characterised by the presence of lymphoid cells and most likely occurs as a result of a cell-mediated hypersensitivity reaction to cell and tissue components altered by interaction with the material components of particulate wear, particularly metal ions released from cobalt-chrome wear particles.Cite this article: Professor N. A. Athanasou. The pathobiology and pathology of aseptic implant failure. Bone Joint Res 2016;5:162-168. DOI: 10.1302/2046-3758.55.BJR-2016-0086.

Corrosion at the head-neck interface of current designs of modular femoral components

There is increasing global awareness of adverse reactions to metal debris and elevated serum metal ion concentrations following the use of second generation metal-on-metal total hip arthroplasties. The high incidence of these complications can be largely attributed to corrosion at the head-neck interface. Severe corrosion of the taper is identified most commonly in association with larger diameter femoral heads. However, there is emerging evidence of varying levels of corrosion observed in retrieved components with smaller diameter femoral heads. This same mechanism of galvanic and mechanically-assisted crevice corrosion has been observed in metal-on-polyethylene and ceramic components, suggesting an inherent biomechanical problem with current designs of the head-neck interface.

We provide a review of the fundamental questions and answers clinicians and researchers must understand regarding corrosion of the taper, and its relevance to current orthopaedic practice.

Cite this article: Bone Joint J 2016;98-B:579–84.

Influence of Surface Coating on Metal Ion Release: Evaluation in Patients With Metal Allergy

Nickel, chromium, and cobalt in stainless steel and Cobalt-chrome-molybdenum (CoCrMo) alloys may induce allergy. The objectives of this study were to evaluate surface coating regarding ion release, patch test reactivity, and arthroplasty performance. Materials and methods included patch test in 31 patients with metal allergy and 30 patients with no allergy to stainless steel and CoCrMo disks that are uncoated or coated by titanium nitride/zirconium nitride (TiN/ZrN). Assessment include atomic absorption spectrometry of released nickel, cobalt, and chromium from the disks after exposure to distilled water, artificial sweat and culture medium. Results showed that both coatings reduced the nickel and chromium release from stainless steel and CoCrMo disks and mostly the cobalt release from the disks (maximally 11.755 µg/cm(2)/5 d to 1.624 by Ti-N and to 0.442 by ZrN). Six of the 31 patients with metal allergy reacted to uncoated disks, but none reacted to the coated disks. The current authors report on exemplary patients with metal allergy who had symptom relief by revision with surface-coated arthroplasty. The authors concluded that the surface coating may prevent cutaneous and peri-implant allergic reactions. [Orthopedics. 2016; 39(3):S24-S30.].

Hip Arthroplasty Pseudotumors: Pathogenesis, Imaging, and Clinical Decision Making

Pseudotumors are a complication of hip arthroplasty. The goal of this article is to review the clinical presentation, pathogenesis, histology, and the role of diagnostic imaging in clinical decision making for treatment, and surveillance of pseudotumors. We will discuss the multimodal imaging appearances, differential diagnosis, associated complications, treatment, and prognosis of pseudotumors, as an aid to the assessment of orthopedic prostheses at the hip.

High Re-Operation Rates Using Conserve Metal-On-Metal Total Hip Articulations

Introduction:

Metal-on-metal hip articulations have been intensely debated after reports of adverse reactions and high failure rates. The aim of this study was to retrospectively evaluate the implant of a metal-on.metal total hip articulation (MOM THA) from a single manufacture in a two-center study.

Materials and Methods:

108 CONSERVE^® MOM THA were implanted in 92 patients between November 2005 and December 2010. Patients had at time of retrospective evaluation their journals reviewed for re-operations and adverse reactions.

Results:

20 hips were re-operated (18.4%) at a mean follow up of 53 months. 4 pseudotumors were diagnosed at time of follow up but no substantiated link was made between adverse reactions and re-operations.

Conclusion:

The high re-operation rates found in this study raised concern about the usage of the MOM THA and subsequently lead to the termination of implantation of this MOM THA at the two orthopaedic departments.

Perfusion MRI in hips with metal-on-metal and metal-on-polyethylene total hip arthroplasty: A pilot study

Objectives

Hips with metal-on-metal total hip arthroplasty (MoM THA) have a high rate of adverse local tissue reactions (ALTR), often associated with hypersensitivity reactions. Dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) measures tissue perfusion with the parameter Ktrans (volume transfer constant of contrast agent). Our purpose was 1) to evaluate the feasibility of DCE-MRI in patients with THA and 2) to compare DCE-MRI in patients with MoM bearings with metal-on-polyethylene (MoP) bearings, hypothesising that the perfusion index Ktrans in hips with MoM THA is higher than in hips with MoP THA.

Methods

In this pilot study, 16 patients with primary THA were recruited (eight MoM, eight MoP). DCE-MRI of the hip was performed at 1.5 Tesla (T). For each patient, Ktrans was computed voxel-by-voxel in all tissue lateral to the bladder. The mean Ktrans for all voxels was then calculated. These values were compared with respect to implant type and gender, and further correlated with clinical parameters.

Results

There was no significant difference between the two bearing types with both genders combined. However, dividing patients by THA bearing and gender, women with MoM bearings had the highest Ktrans values, exceeding those of women with MoP bearings (0.067 min⁻¹versus 0.053 min⁻¹; p-value < 0.05) and men with MoM bearings (0.067 min⁻¹versus 0.034 min⁻¹; p-value < 0.001). Considering only the men, patients with MoM bearings had lower Ktrans than those with MoP bearings (0.034 min⁻¹versus 0.046 min⁻¹; p < 0.05).

Conclusion

DCE-MRI is feasible to perform in tissues surrounding THA. Females with MoM THA show high Ktrans values in DCE-MRI, suggesting altered tissue perfusion kinematics which may reflect relatively greater inflammation.

Cite this article: Dr P. E. Beaule. Perfusion MRI in hips with metal-on-metal and metal-on-polyethylene total hip arthroplasty: A pilot stud. Bone Joint Res 2016;5:73–79. DOI: 10.1302/2046-3758.53.2000572.

Histopathological characterization of corrosion product associated adverse local tissue reaction in hip implants: a study of 285 cases

Background

Adverse local tissue reaction (ALTR), characterized by a heterogeneous cellular inflammatory infiltrate and the presence of corrosion products in the periprosthetic soft tissues, has been recognized as a mechanism of failure in total hip replacement (THA). Different histological subtypes may have unique needs for longitudinal clinical follow-up and complication rates after revision arthroplasty. The purpose of this study was to describe the histological patterns observed in the periprosthetic tissue of failed THA in three different implant classes due to ALTR and their association with clinical features of implant failure.

Methods

Consecutive patients presenting with ALTR from three major hip implant classes (N = 285 cases) were identified from our prospective Osteolysis Tissue Database and Repository. Clinical characteristics including age, sex, BMI, length of implantation, and serum metal ion levels were recorded. Retrieved synovial tissue morphology was graded using light microscopy. Clinical characteristics and features of synovial tissue analysis were compared between the three implant classes. Histological patterns of ALTR identified from our observations and the literature were used to classify each case. The association between implant class and histological patterns was compared.

Results

Our histological analysis demonstrates that ALTR encompasses three main histological patterns: 1) macrophage predominant, 2) mixed lymphocytic and macrophagic with or without features of associated with hypersensitivity/allergy or response to particle toxicity (eosinophils/mast cells and/or lymphocytic germinal centers), and 3) predominant sarcoid-like granulomas. Implant classification was associated with histological pattern of failure, and the macrophagic predominant pattern was more common in implants with metal-on-metal bearing surfaces (MoM HRA and MoM LHTHA groups). Duration of implantation and composition of periprosthetic cellular infiltrates was significantly different amongst the three implant types examined suggesting that histopathological features of ALTR may explain the variability of clinical implant performance in these cases.

Conclusions

ALTR encompasses a diverse range of histological patterns, which are reflective of both the implant configuration independent of manufacturer and clinical features such as duration of implantation. The macrophagic predominant pattern and its mechanism of implant failure represent an important subgroup of ALTR which could become more prominent with increased length of implantation.

Metal-on-metal total hip arthroplasty: is there still a role in 2016?

The use of metal-on-metal (MoM) bearings in total hip arthroplasty (THA) was popularized due to its enhanced wear profile and the ability to use large femoral heads to reduce post-operative instability. However, enthusiasm for the bearing declined following serious complications encountered at the primary articulation. This review discusses the development of MoM and the subsequent unexpected downstream challenges, most notably elevated serum metal ion levels, aseptic lymphocyte-dominated vasculitis-associated lesions (ALVAL), pseudotumor formation, and subsequent soft tissue and bone destruction. Both patient centered risk factors as well as component design led to high early failure rates resulting in product recalls and an overall decline in the use of MoM. In 2016, there is not a role for large-head MoM bearing in THA. Alternatively, the bearing has shown promise in hip resurfacing procedures for carefully selected patients.