Plasmonics for improved photovoltaic devices

Tunable assembly of gold nanoparticles on nanopatterned poly(ethylene glycol) brushes

The organization of metallic nanoparticles (NPs) into ordered arrays on nanopatterned surfaces is an enabling process to fabricate devices and study the properties of the particles. Tailoring the interaction between NPs and nanopatterns is a necessity to gain a high level of control in this process. Here, nanopatterned poly(ethylene glycol) (PEG) brushes are presented as a platform for the organization of Au NPs on surfaces. The binding of citrate-stabilized Au NPs to the PEG brushes depends on the size of the particles and molecular weight of the brushes: the density of NPs immobilized on the nanopatterns of PEG brushes increases with decreasing the diameter of the particles and increasing the chain length of the brushes. The key aspect of the process is to pattern PEG brushes with high resolution and chemical contrast to provide controllable and specific interaction between Au NPs and nanopatterns at a single particle resolution. The modulation of the number (0-4) of Au NPs (e.g., 30 nm) per patterned feature with a high level of accuracy and the generation of patterned heterostructures that consist of two different sizes (e.g., 40 and 20 nm) of particles constitute two examples showing the capabilities of the presented platform.

Rotating polarization spectroscopy for single nano-antenna characterization

We report on a novel micro-spectroscopic technique to quantitatively measure the extinction cross-section σ(ext) of few and single linearly polarizing nano-antennas. This technique relies on rotating the linear polarization of a monochromatic laser beam at a frequency ω(1) while optically chopping the incident beam at ω(2) and using lock-in detection with a switched reference frequency input to measure the amount of scattered and absorbed power. The amount of power removed from the beam corresponds to σ(ext) of the polarizing nano-structure. Furthermore, this technique is easy to integrate into existing microscopy or micro-photoluminescence setups and does not depend on the sample's temperature.

Light trapping in ultrathin silicon photonic crystal superlattices with randomly-textured dielectric incouplers

We report here several different superlattice photonic crystal based designs for 200nm thick c-Si solar cells, demonstrating that these structures have the ability to increase broadband absorption from λ = 300nm to 1100nm by more than 100% compared to a planar cell with an optimized anti-reflection coating. We show that adding superlattices into photonic crystals introduces new optical modes that contribute to enhanced absorption. The greatest improvements are obtained when combining a superlattice photonic crystal with a randomly textured dielectric coating that improves incoupling into the modes of the absorbing region. Finally, we show that our design methodology is also applicable to layers 1 to 4 microns in thickness, where absorbed currents competitive with conventional thick Si solar cells may be achieved.

Optical properties of biaxial nanopatterned gold plasmonic nanowired grid polarizer

Gold nanoparticles deposited on self-organized nano-ripple quartz substrates have been studied by spectroscopic Mueller matrix ellipsometry. The surface was found to have biaxial anisotropic optical properties. For electric field components normal to the ripples the periodic and disconnected nature of the in plane nanowires gives rise to an optical response dominated by the localized plasmon resonance. In the direction parallel to the ripples the gold nanoparticles are aligned closely leading to localized plasmon resonances in the infrared. As Au was deposited at an angle oblique to the surface normal, the gold nanoparticles were formed on the side of the ripples facing the incoming evaporation flux. This makes the gold particles slightly inclined, correspondingly the principal coordinate system of the biaxial dielectric tensor results tilted. The anisotropic plasmonic optical response results in a strong polarizing effect, making it suitable as a plasmonic nanowired grid polarizer.

Efficient coupling between dielectric waveguide modes and exterior plasmon whispering gallery modes

Inefficient coupling between dielectric guided mode and plasmon mode has been overlooked in the past. The coupling mechanism is essentially different from the conventional coupling between dielectric modes. Based on qualitative theoretical analysis, we proposed two methods to strengthen the coupling between dielectric waveguide modes and exterior plasmon whispering gallery modes. One is using a U-shaped bent waveguide to break the adiabatic mode conversion process, and the other is to utilize higher-order dielectric mode to reach phase matching with plasmon mode. Both the transmission spectrum of waveguide and the energy spectrum of cavity demonstrate that the coupling efficiency can be greatly improved. These simple configurations are potential for wide applications, for example, tunable integrated optical devices and sensors.

Observation of the Dyakonov-Tamm wave

A surface electromagnetic wave called the Dyakonov-Tamm wave has been theoretically predicted to exist at the interface of two dielectric materials at least one of which is both anisotropic and periodically nonhomogeneous. For experimental confirmation, a prism-coupled configuration was used to excite Dyakonov-Tamm waves guided by the interface of a dense thin film of magnesium fluoride and a chiral sculptured thin film of zinc selenide. The excitation was indicated by a reflection dip (with respect to the angle of incidence in the prism-coupled configuration) that is independent of the polarization state of the incident light as well as the thicknesses of both partnering materials beyond some thresholds. Applications to optical sensing and long-range on-chip communication are expected.

Investigation of plasmonic gold-silica core-shell nanoparticle stability in dye-sensitized solar cell applications

Plasmonic core-shell Au@SiO2 nanoparticles have previously been shown to enhance the performance of dye-sensitized solar cells (DSSCs). A thin silica coating can provide a better stability during thermal processing and chemical stability to survive the corrosive electrolyte used in DSSCs. However, the thickness and completeness of the silica shell has proven crucial for the performance of the plasmonic particles and is largely controlled by the linking chemistry between the gold core and silica shell. We have evaluated four different silica coating procedures of ∼15 nm gold nanoparticles for usage in DSSCs. The chemical stability of these core-shell nanoparticles was assessed by dispersing the particles in iodide/triiodide electrolyte solution and the thermal stability by heating the particles up to 500°C. In order to maintain stable gold cores a complete silica coating was required, which was best obtained by using a mercaptosilane as a linker. In situ TEM characterization indicated that the heating process only had minor effects on the core-shell particles. The final step was to evaluate how the stable Au@SiO2 nanoparticles were influencing a real DSSC device when mixed into the TiO2 photoanode. The plasmon-incorporated DSSCs showed a ∼10% increase in efficiency compared to devices without core-shell nanoparticles.

Buried nanoantenna arrays: versatile antireflection coating

Reflection is usually a detrimental phenomenon in many applications such as flat-panel-displays, solar cells, photodetectors, infrared sensors, and lenses. Thus far, to control and suppress the reflection from a substrate, numerous techniques including dielectric interference coatings, surface texturing, adiabatic index matching, and scattering from plasmonic nanoparticles have been investigated. A new technique is demonstrated to manage and suppress reflection from lossless and lossy substrates. It provides a wider flexibility in design versus previous methods. Reflection from a surface can be suppressed over a narrowband, wideband, or multiband frequency range. The antireflection can be dependent or independent of the incident wave polarization. Moreover, antireflection at a very wide incidence angle can be attained. The reflection from a substrate is controlled by a buried nanoantenna array, a structure composed of (1) a subwavelength metallic array and (2) a dielectric cover layer referred to as a superstrate. The material properties and thickness of the superstrate and nanoantennas' geometry and periodicity control the phase and intensity of the wave circulating inside the superstrate cavity. A minimum reflectance of 0.02% is achieved in various experiments in the mid-infrared from a silicon substrate. The design can be integrated in straightforward way in optical devices. The proposed structure is a versatile AR coating to optically impedance matches any substrate to free space in selected any narrow and broadband spectral response across the entire visible and infrared spectrum.

Two-dimensional chalcogenide nanoplates as tunable metamaterials via chemical intercalation

New plasmonic materials with tunable properties are in great need for nanophotonics and metamaterials applications. Here we present two-dimensional layered, metal chalcogenides as tunable metamaterials that feature both dielectric photonic and plasmonic modes across a wide spectral range from the infrared to ultraviolet. The anisotropic layered structure allows intercalation of organic molecules and metal atoms at the van der Waals gap of the host chalcogenide, presenting a chemical route to create heterostructures with molecular and atomic precision for photonic and plasmonic applications. This marks a departure from a lithographic method to create metamaterials. Monochromated electron energy-loss spectroscopy in a scanning transmission electron microscope was used to first establish the presence of the dielectric photonic and plasmonic modes in M2E3 (M = Bi, Sb; E = Se, Te) nanoplates and to observe marked changes in these modes after chemical intercalation. We show that these modal properties can also be tuned effectively by more conventional methods such as thickness control and alloy composition of the nanoplates.

Mie resonance-enhanced light absorption in periodic silicon nanopillar arrays

Mie-resonances in vertical, small aspect-ratio and subwavelength silicon nanopillars are investigated using visible bright-field µ-reflection measurements and Raman scattering. Pillar-to-pillar interactions were examined by comparing randomly to periodically arranged arrays with systematic variations in nanopillar diameter and array pitch. First- and second-order Mie resonances are observed in reflectance spectra as pronounced dips with minimum reflectances of several percent, suggesting an alternative approach to fabricating a perfect absorber. The resonant wavelengths shift approximately linearly with nanopillar diameter, which enables a simple empirical description of the resonance condition. In addition, resonances are also significantly affected by array density, with an overall oscillating blue shift as the pitch is reduced. Finite-element method and finite-difference time-domain simulations agree closely with experimental results and provide valuable insight into the nature of the dielectric resonance modes, including a surprisingly small influence of the substrate on resonance wavelength. To probe local fields within the Si nanopillars, µ-Raman scattering measurements were also conducted that confirm enhanced optical fields in the pillars when excited on-resonance.

Photonic-plasmonic-coupled nanoantennas for polarization-controlled multispectral nanofocusing

We report on the design and experimental demonstration of array-enhanced nanoantennas for polarization-controlled multispectral nanofocusing in the near-IR spectral range. We design plasmonic double bow-tie nanoantennas-coupled to multiple-periodic nanoparticle arrays to harvest radiation of designed wavelengths from a large spatial area and to focus it into a targeted nanoscale region. Near-field calculations were performed on a gold nanoantenna array using three-dimensional finite difference time domain simulations. Cross-shaped optical nanoantennas were fabricated on glass substrates using electron beam lithography. The optical characterization of the fabricated nanoantennas was performed using second harmonic excitation spectroscopy that demonstrates multiwavelength photonic coupling in good agreement with the antenna modeling. The nanoantenna structures introduced in this Letter provide the ability to focus optical energy into deep subwavelength areas and to address multiple spectral regions with polarization control. Such attributes are highly desirable in optical biosensing, enhanced Raman scattering, and for nonlinear plasmonic applications.

Onset of bonding plasmon hybridization preceded by gap modes in dielectric splitting of metal disks

Dielectric splitting of nanoscale disks was studied experimentally and via finite-difference time-domain (FDTD) simulations through systematic introduction of multiple ultrathin dielectric layers. Tunable, hybridized dark bonding modes were seen with first-order gap modes preceding the appearance of bonding dipole-dipole disk modes. The observed bright dipolar mode did not show the energy shift expected from plasmon hybridization but activated dark higher order gap modes. Introducing lateral asymmetry was shown to remodel the field distribution resulting in 3D asymmetry that reoriented the dipole orientation away from the dipole of the elementary disk modes.

Orienting nanoantennas in three dimensions to control light scattering across a dielectric interface

The light scattering properties of hemispherical resonant nanoantennas can be used to redirect normal incidence light to propagate within a thin film or thin film-based device, such as a solar cell, for enhanced efficiency. While planar nanoantennas are typically fabricated as simple nanoparticles or nanostructures in the film plane, here we show that a hemispherical nanoantenna with its symmetry axis tilted out of the plane accomplishes this task with far greater efficacy. The amount of light scattered into an underlying dielectric by the electric and magnetic dipole response of oriented nanocups can be more than three times that achieved using symmetric antenna structures.

A resonant scanning dipole-antenna probe for enhanced nanoscale imaging

We present a scanning antenna probe that provides 35 nm optical hotspots with a 16-fold excitation enhancement. A resonant optical antenna, tuned to operation in the visible, is carved into the aluminum-coated scanning probe. The antenna resonances, field localization, excitation, and polarization response are probed in the near-field by scanning over single fluorescent nanobeads. At the same time, the distance-dependent coupling of the emission to the antenna mode is mapped. Good agreement with theory is obtained. The presented scanning antenna approach is useful for both nanoscale plasmonic mode imaging and (bio)imaging.

Plasmon-induced hot electron transfer from the Au tip to CdS rod in CdS-Au nanoheterostructures

The plasmon-exciton interaction mechanisms in CdS-Au colloidal quantum-confined plexcitonic nanorod heterostructures have been studied by transient absorption spectroscopy. Optical excitation of plasmons in the Au tip leads to hot electron injection into the CdS rod with a quantum yield of ~2.75%. This finding suggests the possibility of further optimization of plasmon-induced hot electron injection efficiency through controlling the size and shape of the plasmonic and excitonic domains for potential light harvesting applications.

Plasmonic Enhancement of Dye Sensitized Solar Cells in the Red-to-near-Infrared Region using Triangular Core-Shell Ag@SiO2 Nanoparticles

Recently, plasmonic metal nanoparticles have been shown to be very effective in increasing the light harvesting efficiency (LHE) of dye-sensitized solar cells (DSSCs). Most commonly, spherical nanoparticles composed of silver or gold are used for this application; however, the localized surface plasmon resonances of these isotropic particles have maxima in the 400-550 nm range, limiting any plasmonic enhancements to wavelengths below 600 nm. Herein, we demonstrate that the incorporation of anisotropic, triangular silver nanoprisms in the photoanode of DSSCs can dramatically increase the LHE in the red and near-infrared regions. Core-shell Ag@SiO2 nanoprisms were synthesized and incorporated in various quantities into the titania pastes used to prepare the photoanodes. This optimization led to an overall 32 ± 17% increase in the power conversion efficiency (PCE) of cells made using 0.05% (w/w) of the Ag@SiO2 composite. Measurements of the incident photon-to-current efficiency provided further evidence that this increase is a result of improved light harvesting in the red and near-infrared regions. The effect of shell thickness on nanoparticle stability was also investigated, and it was found that thick (30 nm) silica shells provide the best protection against corrosion by the triiodide-containing electrolyte, while still enabling large improvements in PCE to be realized.

Plasmonic nanopatch array for optical integrated circuit applications

Future plasmonic integrated circuits with the capability of extremely high-speed data processing at optical frequencies will be dominated by the efficient optical emission (excitation) from (of) plasmonic waveguides. Towards this goal, plasmonic nanoantennas, currently a hot topic in the field of plasmonics, have potential to bridge the mismatch between the wave vector of free-space photonics and that of the guided plasmonics. To manipulate light at will, plasmonic nanoantenna arrays will definitely be more efficient than isolated nanoantennas. In this article, the concepts of microwave antenna arrays are applied to efficiently convert plasmonic waves in the plasmonic waveguides into free-space optical waves or vice versa. The proposed plasmonic nanoantenna array, with nanopatch antennas and a coupled wedge plasmon waveguide, can also act as an efficient spectrometer to project different wavelengths into different directions, or as a spatial filter to absorb a specific wavelength at a specified incident angle.

Trends and challenges of refractometric nanoplasmonic biosensors: a review

Motivated by potential benefits such as sensor miniaturization, multiplexing opportunities and higher sensitivities, refractometric nanoplasmonic biosensing has profiled itself in a short time span as an interesting alternative to conventional Surface Plasmon Resonance (SPR) biosensors. This latter conventional sensing concept has been subjected during the last decades to strong commercialization, thereby strongly leaning on well-developed thin-film surface chemistry protocols. Not surprisingly, the examples found in literature based on this sensing concept are generally characterized by extensive analytical studies of relevant clinical and diagnostic problems. In contrast, the more novel Localized Surface Plasmon Resonance (LSPR) alternative finds itself in a much earlier, and especially, more fundamental stage of development. Driven by new fabrication methodologies to create nanostructured substrates, published work typically focuses on the novelty of the presented material, its optical properties and its use - generally limited to a proof-of-concept - as a label-free biosensing scheme. Given the different stages of development both SPR and LSPR sensors find themselves in, it becomes apparent that providing a comparative analysis of both concepts is not a trivial task. Nevertheless, in this review we make an effort to provide an overview that illustrates the progress booked in both fields during the last five years. First, we discuss the most relevant advances in SPR biosensing, including interesting analytical applications, together with different strategies that assure improvements in performance, throughput and/or integration. Subsequently, the remaining part of this work focuses on the use of nanoplasmonic sensors for real label-free biosensing applications. First, we discuss the motivation that serves as a driving force behind this research topic, together with a brief summary that comprises the main fabrication methodologies used in this field. Next, the sensing performance of LSPR sensors is examined by analyzing different parameters that can be invoked in order to quantitatively assess their overall sensing performance. Two aspects are highlighted that turn out to be especially important when trying to maximize their sensing performance, being (1) the targeted functionalization of the electromagnetic hotspots of the nanostructures, and (2) overcoming inherent negative influence that stem from the presence of a high refractive index substrate that supports the nanostructures. Next, although few in numbers, an overview is given of the most exhaustive and diagnostically relevant LSPR sensing assays that have been recently reported in literature, followed by examples that exploit inherent LSPR characteristics in order to create highly integrated and high-throughput optical biosensors. Finally, we discuss a series of considerations that, in our opinion, should be addressed in order to bring the realization of a stand-alone LSPR biosensor with competitive levels of sensitivity, robustness and integration (when compared to a conventional SPR sensor) much closer to reality.

Self-doping and surface plasmon modification induced visible light photocatalysis of BiOCl

In this study we demonstrate that self-doping and surface plasmon resonance could endow a wide-band-gap ternary semiconductor BiOCl with remarkable visible light driven photocatalytic activity on the degradation of organic pollutants and photocurrent generation properties. The self-doped BiOCl with plasmonic silver modification was synthesized by a facile one-pot nonaqueous approach and systematically characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV-visible diffuse reflectance spectra, electron spin resonance, and X-ray photoelectron spectroscopy. The photocurrent enhancement was found to be intimately dependent on the irradiation wavelength and matched well with the intensity of the absorption of the Ag nanoparticles. Reactive species trapping experiments and electron spin resonance spectroscopy with 5,5-dimethyl-1-pyrroline-N-oxide spin-trapping adducts confirmed that more oxidative species could be generated from the photogenerated electrons due to the plasmon-excitation of the metallic Ag in the self-doped BiOCl with plasmonic silver modification, which is responsible for the great enhancement of photocatalytic activity and photocurrent. Surface photovoltage spectroscopy and time-resolved photoluminescence spectroscopy results revealed the transfer of plasmon-band-induced electrons from Ag nanoparticles into BiOCl and the acceleration effect of surface plasmon resonance-induced intense oscillating electric fields on this electron transfer. This study would not only provide direct evidence of plasmonic photocatalysis, but also shed light on the design of highly efficient metal-semiconductor composite photocatalysts.

A review on solar cells from Si-single crystals to porous materials and quantum dots

Solar energy conversion to electricity through photovoltaics or to useful fuel through photoelectrochemical cells was still a main task for research groups and developments sectors. In this article we are reviewing the development of the different generations of solar cells. The fabrication of solar cells has passed through a large number of improvement steps considering the technological and economic aspects. The first generation solar cells were based on Si wafers, mainly single crystals. Permanent researches on cost reduction and improved solar cell efficiency have led to the marketing of solar modules having 12–16% solar conversion efficiency. Application of polycrystalline Si and other forms of Si have reduced the cost but on the expense of the solar conversion efficiency. The second generation solar cells were based on thin film technology. Thin films of amorphous Si, CIS (copper–indium–selenide) and t-Si were employed. Solar conversion efficiencies of about 12% have been achieved with a remarkable cost reduction. The third generation solar cells are based on nano-crystals and nano-porous materials. An advanced photovoltaic cell, originally developed for satellites with solar conversion efficiency of 37.3%, based on concentration of the solar spectrum up to 400 suns was developed. It is based on extremely thin concentration cells. New sensitizer or semiconductor systems are necessary to broaden the photo-response in solar spectrum. Hybrids of solar and conventional devices may provide an interim benefit in seeking economically valuable devices. New quantum dot solar cells based on CdSe–TiO₂ architecture have been developed.

Role of surface recombination in affecting the efficiency of nanostructured thin-film solar cells

Nanostructured light trapping is a promising way to improve the efficiency in thin-film solar cells recently. In this work, both the optical and electrical properties of thin-film solar cells with 1D periodic grating structure are investigated by using photoelectric coupling model. It is found that surface recombination plays a key role in determining the performance of nanostructured thin-film solar cells. Once the recombination effect is considered, the higher optical absorption does not mean the higher conversion efficiency as most existing publications claimed. Both the surface recombination velocity and geometric parameters of structure have great impact on the efficiency of thin-film solar cells. Our simulation results indicate that nanostructured light trapping will not only improve optical absorption but also boost the surface recombination simultaneously. Therefore, we must get the tradeoffs between optical absorption and surface recombination to obtain the maximum conversion efficiency. Our work makes it clear that both the optical absorption and electrical recombination response should be taken into account simultaneously in designing the nanostructured thin-film solar cells.

The versatile designs and optimizations for cylindrical TiO2-based scatterers for solar cell anti-reflection coatings

The anti-reflection coating(ARC) based on dielectric nano-particles has been recently proposed as a new way to achieve the low reflectance required for solar cell front surfaces. In this scenario, the Mie modes associated with the dielectric nano-particles are utilized to facilitate photon forward scattering. In this work, versatile designs together with systematically optimized geometry are examined, for the ARCs based on dielectric scatterers. It is found that the Si3N4-TiO2 or SiO2-TiO2 stack is capable of providing low reflectance while maintaining a flat and passivated ARC-semiconductor interface which can be beneficial for reduced interface recombination and prevent V(OC) degradation associated with topography on the active materials. It is also confirmed that the plasmonic nano-particles placed at the front side of solar cells is not a preferred scheme, even with thorough geometrical optimization. At the ultimate design based on mixed graded index(GI) Mie-scattering, the averaged reflectance can be as low as 0.25%. Such a low reflectance is currently only achievable by ultra-long silicon nano-tips, but silicon nano-tips introduce severe surface recombination. On the other hand, the mixed GI Mie design preserves a flat and passivated ARC-silicon interface, with total thickness reduced to 279.8 nm, much thinner than 1.6 μm for silicon nanotips. In addition, the light trapping capability of mixed GI Mie design is much better than silicon nanotips. In fact, when compared to the state-of-art TiO2 light trapping anti-reflection coating, the mixed GI Mie design provides same light trapping capability while providing much lower reflectance.

Designing dielectric resonators on substrates: combining magnetic and electric resonances

High-performance integrated optics, solar cells, and sensors require nanoscale optical components at the surface of the device, in order to manipulate, redirect and concentrate light. High-index dielectric resonators provide the possibility to do this efficiently with low absorption losses. The resonances supported by dielectric resonators are both magnetic and electric in nature. Combined scattering from these two can be used for directional scattering. Most applications require strong coupling between the particles and the substrate in order to enhance the absorption in the substrate. However, the coupling with the substrate strongly influences the resonant behavior of the particles. Here, we systematically study the influence of particle geometry and dielectric environment on the resonant behavior of dielectric resonators in the visible to near-IR spectral range. We show the key role of retardation in the excitation of the magnetic dipole (MD) mode, as well as the limit where no MD mode is supported. Furthermore, we study the influence of particle diameter, shape and substrate index on the spectral position, width and overlap of the electric dipole (ED) and MD modes. Also, we show that the ED and MD mode can selectively be enhanced or suppressed using multi-layer substrates. And, by comparing dipole excitation and plane wave excitation, we study the influence of driving field on the scattering properties. Finally, we show that the directional radiation profiles of the ED and MD modes in resonators on a substrate are similar to those of point-dipoles close to a substrate. Altogether, this work is a guideline how to tune magnetic and electric resonances for specific applications.

Realizing vertical light coupling and splitting in nano-plasmonic multilevel circuits

We present a novel technique for vertical coupling of light guided by nanoscale plasmonic slot waveguides (PSWs). A triangularly-shaped plasmonic slot waveguide rotator is exploited to attain such coupling with a good efficiency over a wide bandwidth. Using this approach, light propagating in a horizontal direction is efficiently coupled to propagate in the vertical direction and vice versa. We also propose a power divider configuration to evenly split a vertically coupled light wave to two horizontal channels. A detailed parametric study of the triangular rotator is demonstrated with multiple configurations analyzed. This structure is suitable for efficient coupling in multilevel nano circuit environment.

The influence of silver core position on enhanced photon absorption of single nanowire α-Si solar cells

Photon absorption of single nanowire solar cells can be modulated by metallic core. Silver core was integrated into α-Si single nanowire solar cells (SNSCs), and the influence of silver core position on enhanced photon absorption efficiency and the short circuit current (J(sc)) was investigated. The finite-difference time domain (FDTD) method was used to rigorously solve Maxwell's equations in two dimensions. The J(sc) decreases when the silver core is integrated into the center of nanowire. However, the photon absorption efficiencies and J(sc) could be enhanced by tuning the core position in the nanowire. J(sc) enhancement of 21.4% is achieved when nanowire radius R is 190 nm, core radius r is 30 nm, the silver core is located in the negative Y-axis and the distance from the center of silver core to the origin d is 102 nm under realistic solar illumination.

Resonant circuit model for efficient metamaterial absorber

The resonant absorption in a planar metamaterial is studied theoretically. We present a simple physical model describing this phenomenon in terms of equivalent resonant circuit. We discuss the role of radiative and dissipative damping of resonant mode supported by a metamaterial in the formation of absorption spectra. We show that the results of rigorous calculations of Maxwell equations can be fully retrieved with simple model describing the system in terms of equivalent resonant circuit. This simple model allows us to explain the total absorption effect observed in the system on a common physical ground by referring it to the impedance matching condition at the resonance.

Absorption enhancing proximity effects in aperiodic nanowire arrays

Aperiodic Nanowire (NW) arrays have higher absorption than equivalent periodic arrays, making them of interest for photovoltaic applications. An inevitable property of aperiodic arrays is the clustering of some NWs into closer proximity than in the equivalent periodic array. We focus on the modes of such clusters and show that the reduced symmetry associated with cluster formation allows external coupling into modes which are dark in periodic arrays, thus increasing absorption. To exploit such modes fully, arrays must include tightly clustered NWs that are unlikely to arise from fabrication variations but must be created intentionally.

A study of shape optimization on the metallic nanoparticles for thin-film solar cells

The shape of metallic nanoparticles used to enhance the performance of thin-film solar cells is described by Gielis' superformula and optimized by an evolutionary algorithm. As a result, we have found a lens-like nanoparticle capable of improving the short circuit current density to 19.93 mA/cm2. Compared with a two-scale nanospherical configuration recently reported to synthesize the merits of large and small spheres into a single structure, the optimized nanoparticle enables the solar cell to achieve a further 7.75% improvement in the current density and is much more fabrication friendly due to its simple shape and tolerance to geometrical distortions.

Tight-binding calculations of the optical response of optimally P-doped Si nanocrystals: a model for localized surface plasmon resonance

We present tight-binding calculations in the random-phase approximation of the optical response of Silicon nanocrystals (Si NCs) ideally doped with large concentrations of phosphorus (P) atoms. A collective response of P-induced electrons is demonstrated, leading to localized surface plasmon resonance (LSPR) when a Si NC contains more than ≈10 P atoms. The LSPR energy varies not only with doping concentration but also with NC size due to size-dependent screening by valence electrons. The simple Drude-like behavior is recovered for NC size above 4 nm. Si NCs containing a large number of deep defects in place of hydrogenic impurities do not give rise to LSPR.

Selective optical assembly of highly uniform nanoparticles by doughnut-shaped beams

A highly efficient natural light-harvesting antenna has a ring-like structure consisting of dye molecules whose absorption band changes through selective evolutionary processes driven by external stimuli, i.e., sunlight depending on its territory and thermal fluctuations. Inspired by this fact, here, we experimentally and theoretically demonstrate the selective assembling of ring-like arrangements of many silver nanorods with particular shapes and orientations onto a substrate by the light-induced force of doughnut beams with different colours (wavelengths) and polarizations in conjunction with thermal fluctuations at room temperature. Furthermore, the majority of nanorods are electromagnetically coupled to form a prominent red-shifted collective mode of localized surface plasmons resonant with the wavelength of the irradiated light, where a spectral broadening also appears for the efficient broadband optical response. The discovered principle is a promising route for "bio-inspired selective optical assembly" of various nanomaterials that can be used in the wide field of nanotechnology.

Molding of Plasmonic Resonances in Metallic Nanostructures: Dependence of the Non-Linear Electric Permittivity on System Size and Temperature

In this paper, we review the principal theoretical models through which the dielectric function of metals can be described. Starting from the Drude assumptions for intraband transitions, we show how this model can be improved by including interband absorption and temperature effect in the damping coefficients. Electronic scattering processes are described and included in the dielectric function, showing their role in determining plasmon lifetime at resonance. Relationships among permittivity, electric conductivity and refractive index are examined. Finally, a temperature dependent permittivity model is presented and is employed to predict temperature and non-linear field intensity dependence on commonly used plasmonic geometries, such as nanospheres.

Plasmon-enhanced light harvesting of chlorophylls on near-percolating silver films via one-photon anti-Stokes upconversion

There exists a wealth of means of efficient utilization of solar energy in nature, with photosynthesis of chlorophylls as a prime example. Separately, artificially structured plasmonic materials are versatile in light harvesting and energy conversion. Using a simple and scalable design of near-percolating silver nanostructures, we demonstrate that the light-harvesting efficiency of chlorophylls can be drastically enhanced by tuning the plasmon frequency of the constituent silver nanoparticles to coincide with the maximal photon flux of sunlight. In particular, we show that the photon upconversion efficiency can be readily enhanced by over 20 folds, with the room-temperature fluorescence quantum yield increased by a factor of 2.63. The underlying mechanism for the upconversion enhancement is attributed to a one-electron-per-photon anti-Stokes process, involving absorption of a characteristic phonon mode of the chlorophylls. These findings suggest that chlorophylls can serve as molecular building blocks for high-efficiency light harvesting and solar energy conversion.

Compact aperiodic metallic groove arrays for unidirectional launching of surface plasmons

The ever-increasing power of computers and the development of new optimization methodologies have enabled the ability to design complex aperiodic devices, which can outperform periodic ones and offer new functionalities. Here, we describe the realization of an ultracompact aperiodic grating coupler capable of selectively launching surface plasmon polaritons (SPPs) in a desired direction. We use a transfer matrix model to facilitate the rapid optimization of such structures. We demonstrate both numerically and experimentally that a structure consisting of five subwavelength grooves patterned into silver can unidirectionally launch SPPs in the visible spectral range with a record right-to-left contrast ratio of 55. The general design principles behind this study can readily be extended to a great diversity of sophisticated aperiodic nanophotonic structures.

Multicomponent nanopatterns by directed block copolymer self-assembly

Complex nanopatterns integrating diverse nanocomponents are crucial requirements for advanced photonics and electronics. Currently, such multicomponent nanopatterns are principally created by colloidal nanoparticle assembly, where large-area processing of highly ordered nanostructures raises significant challenge. We present multicomponent nanopatterns enabled by block copolymer (BCP) self-assembly, which offers device oriented sub-10-nm scale nanopatterns with arbitrary large-area scalability. In this approach, BCP nanopatterns direct the nanoscale lateral ordering of the overlaid second level BCP nanopatterns to create the superimposed multicomponent nanopatterns incorporating nanowires and nanodots. This approach introduces diverse chemical composition of metallic elements including Au, Pt, Fe, Pd, and Co into sub-10-nm scale nanopatterns. As immediate applications of multicomponent nanopatterns, we demonstrate multilevel charge-trap memory device with Pt-Au binary nanodot pattern and synergistic plasmonic properties of Au nanowire-Pt nanodot pattern.

Facile multifunctional plasmonic sunlight harvesting with tapered triangle nanopatterning of thin films

Plasmonic absorbers have recently become important for a broad spectrum of sunlight-harvesting applications exploiting either heat generation, such as in thermal photovoltaics and solar thermoelectrics, or hot-electron generation, such as in photochemical and solid state devices. So far, despite impressive progress, combining the needed high performance with fabrication simplicity and scalability remains a serious challenge. Here, we report on a novel solar absorber concept, where we demonstrate and exploit simultaneously a host of absorption phenomena in tapered triangle arrays integrated in a metal-insulator-metal configuration to achieve ultrabroadband (88% average absorption in the range of 380-980 nm), wide-angle and polarization-insensitive absorption. Furthermore, this absorber is subwavelength in thickness (260 nm) and its fabrication is based on a facile, low-cost and potentially scalable method. In addition, the geometry of our design makes it compatible for both heat and hot electron generation.

Diffuse scattering from hemispherical nanoparticles at the air-silicon interface

There has been much recent interest in the application of plasmonics to improve the efficiency of silicon solar cells. In this paper we use finite difference time domain calculations to investigate the placement of hemispherical gold nanoparticles on the rear surface of a silicon solar cell. The results indicate that nanoparticles protruding into the silicon, rather than into air, have a larger scattering efficiency and diffuse scattering into the semiconductor. This finding could lead to improved light trapping within a thin silicon solar cell device.

Plasmonic amplification with ultra-high optical gain at room temperature

Nanoplasmonic devices are promising for next generation information and communication technologies because of their capability to confine light at subwavelength scale and transport signals with ultrahigh speeds. However, ohmic losses are inherent to all plasmonic devices so that further development of integrated plasmonics requires efficient in situ loss compensation of signals with a wavelength and polarization of choice. Here we show that CdSe nanobelt/Al₂O₃/Ag hybrid plasmonic waveguides allow for efficient broadband loss compensation of propagating hybrid plasmonic signals of different polarizations using an optical pump and probe technique. With an internal gain coefficient of 6755 cm⁻¹ at ambient condition, almost 100% of the propagation loss of TM-dominant plasmonic signals is compensated. From comparison with a similar photonic structure we attribute the fast-increasing gain at low pump intensity in hybrid plasmonic waveguides to the transfer across the metal-oxide-semiconductor interface of ‘hot' electrons photogenerated by the pump light.

Broadband solar absorption enhancement via periodic nanostructuring of electrodes

Solution processed colloidal quantum dot (CQD) solar cells have great potential for large area low-cost photovoltaics. However, light utilization remains low mainly due to the tradeoff between small carrier transport lengths and longer infrared photon absorption lengths. Here, we demonstrate a bottom-illuminated periodic nanostructured CQD solar cell that enhances broadband absorption without compromising charge extraction efficiency of the device. We use finite difference time domain (FDTD) simulations to study the nanostructure for implementation in a realistic device and then build proof-of-concept nanostructured solar cells, which exhibit a broadband absorption enhancement over the wavelength range of λ = 600 to 1,100 nm, leading to a 31% improvement in overall short-circuit current density compared to a planar device containing an approximately equal volume of active material. Remarkably, the improved current density is achieved using a light-absorber volume less than half that typically used in the best planar devices.

Photo-conversion of CO2 using titanium dioxide: enhancements by plasmonic and co-catalytic nanoparticles

Converting carbon dioxide (CO2) to hydrocarbons that can be used as fuels is beneficial from both environmental and economic points of view. In this study, nanoparticles are designed to enhance the photoreduction of CO2 on a titanium dioxide (TiO2) catalyst. An increase in catalytic activity is reported when silver (Ag), platinum (Pt) or bimetallic Ag-Pt and core-shell Ag@silica (SiO2) nanoparticles are used with the TiO2 semiconductor catalyst. Nanoparticles with different elemental composition or geometrical structure facilitate successive photo-excitation steps-generation, transport, storage and interfacial transfer of electrons and holes. Results show that while the addition of either type of nanoparticles augments product formation rates, bimetallic co-catalysts improve product selectivity. When both bimetallic co-catalysts and Ag@SiO2 nanoparticles are used in combination, product yields are enhanced more than seven fold in comparison to native TiO2 and high selectivity for methane (CH4) is observed. When the bimetallic Ag-Pt co-catalysts are tuned, a selectivity of CH4 of approximately 80%, as compared to 20% with only TiO2, can be achieved.

Generic process for highly stable metallic nanoparticle-semiconductor heterostructures via click chemistry for electro/photocatalytic applications

Metallic nanoparticles (MNP) are utilized as electrocatalysts, cocatalysts, and photon absorbers in heterostructures that harvest solar energy. In such systems, the interface formed should be stable over a wide range of pH values and electrolytes. Many current nonthermal processing strategies rely on physical interactions to bind the MNP to the semiconductor. In this work, we demonstrate a generic chemical approach for fabricating highly stable electrochemically/photocatalytically active monolayers and tailored multilayered nanoparticle structures using azide/alkyne-modified Au, TiO2, and SiO2 nanoparticles on alkyne/azide-modified silicon, indium tin oxide, titania, stainless steel, and glass substrates via click chemistry. The stability, electrical, electrochemical, and photocatalytic properties of the interface are shown via electrochemical water splitting, methanol oxidation, and photocatalytic degradation of Rhodamine B (RhB) dye. The results suggest that the proposed approach can be extended for the large-scale fabrication of highly stable heterostructure materials for electrochemical and photoelectrocatalytic devices.