Principles, techniques, and applications of biocatalyst immobilization for industrial application

Enhancing coupled enzymatic activity by conjugating one enzyme to a nanoparticle

Enzymes have long been a prime research target for the commercial production of commodity and specialty chemicals, design of sensing devices, and the development of therapeutics and new chemical processes. Industrial applications for enzymes can potentially be enhanced by enzyme immobilization which often allows for increased enzyme stability, facile product purification, and minimized substrate diffusion times in multienzymatic cascades, but this is usually at the cost of a significant decrease in catalytic rates. Recently, enzyme immobilization has been advanced by the discovery that nanoparticle surfaces are frequently able to enhance the activity of the bound enzyme. Here we extend this observation to a multienzymatic coupled system using semiconductor quantum dots (QDs) as a model nanoparticle material and the prototypical enzyme pair of glucose oxidase (GOX) and horseradish peroxidase (HRP). We first demonstrate that HRP binding to QDs has a significant beneficial effect on enzymatic activity, producing a >2-fold improvement in k_cat. We argue that this enhancement is due to affinity of the QD surface for the substrate. Furthermore, we demonstrate that when the ratio of GOX to HRP is adjusted to allow HRP to be the rate-limiting step of the pathway, the QD-induced rate enhancement of HRP can be maintained in a multi-enzyme cascade. Kinetic analysis shows that the underlying processes can be simulated numerically and provide insight into the governing mechanisms. The potential of nanoparticle-based catalytic enhancement is then discussed in the context of multienzyme cascades and synthetic biology.

Tailor-made biocatalysts based on scarcely studied acidic horseradish peroxidase for biodegradation of reactive dyes

Peroxidases (EC 1.11.1.7) have enormous biotechnological applications. Usage of more abundant, basic isoforms of peroxidases in diagnostic kits and/or in immunochemistry has led to under exploitation and disregard of horseradish peroxidase (HRP) acidic isoforms. Therefore, acidic horseradish peroxidase (HRP-A) isoenzyme was used for the preparation of a biocatalyst with improved ability in dye decolorization. Ten biocatalysts were prepared by covalent binding of enzyme to chitosan and alginate, adsorption followed by cross-linking on inorganic support (aluminum oxide), and encapsulation in spherical calcium alginate beads via polyethylene glycol. Model dyes of 50 to 175 mg l^-1 were removed by the biocatalysts. Among the tested biocatalysts, the three with the highest specific activity and biodegradation rate were further studied (Chitosan-HRP, Al-Gel-HRP and Al-HRP-Gel). The impact of hydrogen peroxide concentration on dye decolorization was examined on the Chitosan-HRP biocatalyst, since the HRP is susceptible to inhibition/inactivation by high H₂O₂. On the other hand, H₂O₂ is needed as a co-substrate for the HRP, and the H₂O₂/dye ratio can greatly influence decolorization efficiency. Concentrations of H₂O₂ ranging from 0.22 to 4.4 mM showed no difference in terms of impact on the biocatalyst decolorization efficiency. The high decolorization efficiency of the biocatalysts was validated by the removal of 25 and 100 mg l^-1 anthraquinone (Remazol Brilliant Blue R (RBBR)), triphenylmethane (Coomassie Brilliant Blue (CBB)), acridine (Acridine Orange (AO)), and formazan metal complex dye (Reactive Blue 52 (RB52)). After the seven consecutive decolorization cycles, the decolorization was still 53, 78, and 67% of the initial dye for the Al-HRP-Gel, Al-Gel-HRP, and Chitosan-HRP immobilizate, respectively. The results obtained showed potential of otherwise neglected acidic HRP isoforms as a cost-effective biocatalyst with significant potential in wastewater dyestuff treatment.

Current advances in biological production of propionic acid

Propionic acid and its derivatives are considered "Generally Recognized As Safe" food additives and are generally used as an anti-microbial and anti-inflammatory agent, herbicide, and artificial flavor in diverse industrial applications. It is produced via biological pathways using Propionibacterium and some anaerobic bacteria. However, its commercial chemical synthesis from the petroleum-based feedstock is the conventional production process bit results in some environmental issues. Novel biological approaches using microorganisms and renewable biomass have attracted considerable recent attention due to economic advantages as well as great adaptation with the green technology. This review provides a comprehensive overview of important biotechnological aspects of propionic acid production using recent technologies such as employment of co-culture, genetic and metabolic engineering, immobilization technique and efficient bioreactor systems.

Evaluation of immobilized hFMO3 on magnetic nanoparticles by capillary zone electrophoresis

Aim: In this paper, we developed a method to immobilize human flavin-containing monooxygenase-3 (hFMO3) using glutaraldehyde as a cross-linker onto amino-functionalized magnetic nanoparticles. Materials & methods: All the analyses were done using capillary electrophoresis coupled with a diode array detector using clozapine as a substrate. Results: The apparent Km with clozapine as substrate and inhibition of hFMO3 by methimazole were explored for immobilized hFMO3 and were found to be comparable to literature values. The immobilized enzyme could be used three-times continuously at 37°C with no loss in enzyme activity. Conclusion: A method to immobilize hFMO3 on magnetic nanoparticles has been described and evaluated in terms of enzyme activity, inhibition, pH stability and reusability.

Tailored sol–gel immobilized lipase preparates for the enzymatic kinetic resolution of heteroaromatic alcohols in batch and continuous flow systems

The EKR of some heteroaromatic secondary ethanols with tailored sol–gel immobilized lipases in batch and continuous-flow reactors was studied. The productivity in continuous-flow mode is higher than in batch mode.

Agarose and Its Derivatives as Supports for Enzyme Immobilization

Agarose is a polysaccharide obtained from some seaweeds, with a quite particular structure that allows spontaneous gelation. Agarose-based beads are highly porous, mechanically resistant, chemically and physically inert, and sharply hydrophilic. These features-that could be further improved by means of covalent cross-linking-render them particularly suitable for enzyme immobilization with a wide range of derivatization methods taking advantage of chemical modification of a fraction of the polymer hydroxyls. The main properties of the polymer are described here, followed by a review of cross-linking and derivatization methods. Some recent, innovative procedures to optimize the catalytic activity and operational stability of the obtained preparations are also described, together with multi-enzyme immobilized systems and the main guidelines to exploit their performances.

Uranium removal by novel graphene oxide-immobilized Saccharomyces cerevisiae gel beads

To evaluate its ability to absorb dissolved uranium (VI), the waste biomass of Saccharomyces cerevisiae was immobilized using different agents, including Ca-alginate (Ca-SA), Ca-alginate with graphene oxide (GO), polyvinyl alcohol (PVA, 5% or 10%, w/v)-SA-GO in CaCl₂-boric acid solution. The experimental results showed that graphene oxide at 0.01% (w/v) could enhance the performance of the immobilized cells. The yeast gel beads prepared with 5% PVA-1% SA-2% yeast-0.01% GO-2% CaCl₂-saturated boric acid (4#) generally showed the better physical-chemical properties such as higher tolerance to the unfavorable environmental conditions. Moreover, the 4# gel beads exhibited more stable capacity for U(VI) sorption and desorption at various conditions, such as pH in the range of 3-9. A pseudo second-order kinetic model could describe the kinetics of U(VI) sorption onto the 4# gel beads (R² = 0.96). The Langmuir, Freundlich, Tempkin and Sips models could be used to describe U(VI) sorption by the 4# gel beads, with the R² being 0.90, 0.83, 0.96, 0.97, respectively. The Sips maximum capacity of 4# gel beads was 24.4 mg U/g dry weight. The desorption efficiency of U(VI) adsorbed onto the 4# gel beads was 91%, 73% and 40% by 0.1 M HNO₃, 0.1 M HCl and 0.1 M NaOH, respectively. However, the 4# gel beads exhibited lower U(VI) sorption capacity than the raw yeast cell (Sips maximum capacity of 35.6 mg U/g). The immobilized Saccharomyces cerevisiae using SA, PVA and/or GO showed obvious changes in the molecular vibration of functional groups such as carboxyl, amide and hydroxyl groups compared with the raw yeast cells, according to FTIR analysis. The SEM-EDX analysis showed that U(VI) was adsorbed unevenly on the cellular surface. Carboxyl and hydroxyl groups may be involved in U(VI) binding by yeast cells.

Candida antarctica Lipase B Immobilized onto Chitin Conjugated with POSS® Compounds: Useful Tool for Rapeseed Oil Conversion

A new method is proposed for the production of a novel chitin-polyhedral oligomeric silsesquioxanes (POSS) enzyme support. Analysis by such techniques as X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed the effective functionalization of the chitin surface. The resulting hybrid carriers were used in the process of immobilization of the lipase type b from Candida antarctica (CALB). Fourier transform infrared spectroscopy (FTIR) confirmed the effective immobilization of the enzyme. The tests of the catalytic activity showed that the resulting support-biocatalyst systems remain hydrolytically active (retention of the hydrolytic activity up to 87% for the chitin + Methacryl POSS® cage mixture (MPOSS) + CALB after 24 h of the immobilization), as well as represents good thermal and operational stability, and retain over 80% of its activity in a wide range of temperatures (30-60 °C) and pH (6-9). Chitin-POSS-lipase systems were used in the transesterification processes of rapeseed oil at various reaction conditions. Produced systems allowed the total conversion of the oil to fatty acid methyl esters (FAME) and glycerol after 24 h of the process at pH 10 and a temperature 40 °C, while the Methacryl POSS® cage mixture (MPOSS) was used as a chitin-modifying agent.

Immobilization of α-Amylase from Anoxybacillus sp. SK3-4 on ReliZyme and Immobead Supports

α-Amylase from Anoxybacillus sp. SK3-4 (ASKA) is a thermostable enzyme that produces a high level of maltose from starches. A truncated ASKA (TASKA) variant with improved expression and purification efficiency was characterized in an earlier study. In this work, TASKA was purified and immobilized through covalent attachment on three epoxide (ReliZyme EP403/M, Immobead IB-150P, and Immobead IB-150A) and an amino-epoxide (ReliZyme HFA403/M) activated supports. Several parameters affecting immobilization were analyzed, including the pH, temperature, and quantity (mg) of enzyme added per gram of support. The influence of the carrier surface properties, pore sizes, and lengths of spacer arms (functional groups) on biocatalyst performances were studied. Free and immobilized TASKAs were stable at pH 6.0-9.0 and active at pH 8.0. The enzyme showed optimal activity and considerable stability at 60 °C. Immobilized TASKA retained 50% of its initial activity after 5-12 cycles of reuse. Upon degradation of starches and amylose, only immobilized TASKA on ReliZyme HFA403/M has comparable hydrolytic ability with the free enzyme. To the best of our knowledge, this is the first report of an immobilization study of an α-amylase from Anoxybacillus spp. and the first report of α-amylase immobilization using ReliZyme and Immobeads as supports.

Immobilization of Chlamydomonas reinhardtii CLH1 on APTES-Coated Magnetic Iron Oxide Nanoparticles and Its Potential in the Production of Chlorophyll Derivatives

Recombinant Chlamydomonas reinhardtii chlorophyllase 1 (CrCLH1) that could catalyze chlorophyll hydrolysis to chlorophyllide and phytol in vitro was successfully expressed in Escherichia coli. The recombinant CrCLH1 was immobilized through covalent binding with a cubic (3-aminopropyl) triethoxysilane (APTES) coating on magnetic iron oxide nanoparticles (MIONPs), which led to markedly improved enzyme performance and decreased biocatalyst costs for potential industrial application. The immobilized enzyme exhibited a high immobilization yield (98.99 ± 0.91 mg/g of gel) and a chlorophyllase assay confirmed that the immobilized recombinant CrCLH1 retained enzymatic activity (722.3 ± 50.3 U/g of gel). Biochemical analysis of the immobilized enzyme, compared with the free enzyme, showed higher optimal pH and pH stability for chlorophyll-a hydrolysis in an acidic environment (pH 3-5). In addition, compared with the free enzyme, the immobilized enzyme showed higher activity in chlorophyll-a hydrolysis in a high temperature environment (50-60 °C). Moreover, the immobilized enzyme retained a residual activity of more than 64% of its initial enzyme activity after 14 cycles in a repeated-batch operation. Therefore, APTES-coated MIONP-immobilized recombinant CrCLH1 can be repeatedly used to lower costs and is potentially useful for the industrial production of chlorophyll derivatives.

The use of a proteinaceous "cushion" with a polystyrene-binding peptide tag to control the orientation and function of a target peptide adsorbed to a hydrophilic polystyrene surface

In immobilizing target biomolecules on a solid surface, it is essential (i) to orient the target moiety in a preferred direction and (ii) to avoid unwanted interactions of the target moiety including with the solid surface. The preferred orientation of the target moiety can be achieved by genetic conjugation of an affinity peptide tag specific to the immobilization surface. Herein, we report on a strategy for reducing the extent of direct interaction between the target moiety and surface in the immobilization of hexahistidine peptide (6His) and green fluorescent protein (GFP) on a hydrophilic polystyrene (PS) surface: Ribonuclease HII from Thermococcus kodakaraensis (cHII) was genetically inserted as a "cushion" between the PS-affinity peptide tag and target moiety. The insertion of a cushion protein resulted in a considerably stronger immobilization of target biomolecules compared to conjugation with only a PS affinity peptide tag, resulting in a substantially enhanced accessibility of the detection antibody to the target 6His peptide. The fluorescent intensity of the GFP moiety was decreased by approximately 30% as the result of fusion with cHII and the PS-affinity peptide tag but was fully retained in the immobilization on the PS surface irrespective of the increased binding force. Furthermore, the fusion of cHII did not impair the stability of the target GFP moiety. Accordingly, the use of a proteinaceous cushion appears to be promising for the immobilization of functional biomolecules on a solid surface. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:527-534, 2016.

Stabilized enzyme immobilization on micron-size PSt–GMA microspheres: different methods to improve the carriers' surface biocompatibility

Stabilized immobilization of biomacromolecules on carriers with appropriate orientation and minimum conformational changes is very important in the biochemical and biomedical fields.

Purification and immobilization of the recombinant Brassica oleracea Chlorophyllase 1 (BoCLH1) on DIAION®CR11 as potential biocatalyst for the production of chlorophyllide and phytol

Recombinant Brassica oleracea chlorophyllase 1 (BoCLH1) with a protein molecular weight of 38.63 kDa was successfully expressed in E. coli and could catalyze chlorophyll (Chl) hydrolysis to chlorophyllide and phytol in vitro. In this study, we used DIAION^®CR11, a highly porous cross-linked polystyrene divinylbenzene-based metal chelator, for purifying and immobilizing the poly (His)-tagged enzyme. The Cu(II) showed the highest protein adsorption (9.2 ± 0.43 mg/g gel) and enzyme activity (46.3 ± 3.14 U/g gel) for the immobilization of the poly (His)-tagged recombinant BoCLH1 compared with other metal chelators. Biochemical analysis of the immobilized enzyme showed higher chlorophyllase activity for Chl a hydrolysis in a weak base environment (pH 8.0), and activity above 70% was in a high-temperature environment, compared with the free enzyme. In addition, compared with free BoCLH1, the enzyme half-life (t_1/2) of the immobilized BoCLH1 increased from 25.42 to 54.35 min (approximately two-fold) at 60 °C. The immobilized enzyme retained a residual activity of approximately 60% after 17 cycles in a repeated-batch operation. Therefore, DIAION^®CR11Cu(II)-immobilized recombinant BoCLH1 can be repeatedly used to lower the cost and is potentially useful for the industrial production of chlorophyllide and phytol.