The mechanism of proton conduction in phosphoric acid

Effect of sulfonated graphene oxide on the performance enhancement of acid–base composite membranes for direct methanol fuel cells

Sulfonated poly(1,4-phenylene ether ether sulfone) (SPEES)/poly(ether imide) (PEI)/sulfonated graphene oxide (SGO) based proton exchange membranes (PEMs) were prepared by a solution casting method.

Structural and conformational properties of polybenzimidazoles in melt and phosphoric acid solution: a polyelectrolyte membrane for fuel cells

In this work, a single chain conformational analysis of poly[2,2′-(p-phenylene)-5,5′-bibenzimidazole (PBI) and poly(2,5-benzimidazole) (ABPBI) in melt as well as in PA was performed using classical molecular dynamics simulations.

Nano iron pyrite (FeS2) exhibits bi-functional electrode character

Sustainable charge storage devices require materials that are environmentally benign, readily moldable, easily synthesizable, and profitable for applications in the electronics industry.

Enhanced proton conductivity of proton exchange membranes by incorporating phosphorylated hollow titania spheres

The synergistic enhancement in proton conductivity of hybrid membranes by improving the water retention capacity and introducing additional proton transfer sites is reported.

Phosphoric acid doped imidazolium silane crosslinked poly(epichlorihydrin)/PTFE as high temperature proton exchange membranes

Phosphoric acid doped novel high temperature proton exchange membranes based on the imidazolium functionalized poly(epichlorohydrin) and porous polyetrafluoroethylene were fabricated and investigated.

Proton transport mechanism of imidazole, triazole and phosphoric acid mixtures from ab initio molecular dynamics simulations

We performed first principles molecular dynamics simulations to elucidate the mechanism and role of 1,2,3-triazole in proton transport while it is mixed with phosphoric acid (PA) and a phosphoric acid imidazole mixture. PA doped imidazole based polymer acts as an efficient polyelectrolyte membrane for fuel cells. The conductivity of this membrane increases when triazole is added to the system. For the first time we performed ab initio molecular dynamics simulations of complex mixtures of PA, imidazole and triazole. We have quantitatively estimated the structural diffusion and vehicular motion of protons. We found that upon the addition of triazole in PA and the PA imidazole mixture, the structural diffusion of protons increases significantly. The mechanism of proton transport is different when triazole is added to the mixture. We have also identified two different paths for structural diffusion (constructive and non-constructive) that contribute to long and short range proton transport.

Proton transfer in a short hydrogen bond caused by solvation shell fluctuations: an ab initio MD and NMR/UV study of an (OHO)(-) bonded system

We present a joint experimental and quantum chemical study on the influence of solvent dynamics on the protonation equilibrium in a strongly hydrogen bonded phenol-acetate complex in CD2Cl2. Particular attention is given to the correlation of the proton position distribution with the internal conformation of the complex itself and with fluctuations of the aprotic solvent. Specifically, we have focused on a complex formed by 4-nitrophenol and tetraalkylammonium-acetate in CD2Cl2. Experimentally we have used combined low-temperature (1)H and (13)C NMR and UV-vis spectroscopy and showed that a very strong OHO hydrogen bond is formed with proton tautomerism (PhOH···(-)OAc and PhO(-)···HOAc forms, both strongly hydrogen bonded). Computationally, we have employed ab initio molecular dynamics (70 and 71 solvent molecules, with and without the presence of a counter-cation, respectively). We demonstrate that the relative motion of the counter-cation and the "free" carbonyl group of the acid plays the major role in the OHO bond geometry and causes proton "jumps", i.e. interconversion of PhOH···(-)OAc and PhO(-)···HOAc tautomers. Weak H-bonds between CH(CD) groups of the solvent and the oxygen atom of carbonyl stabilize the PhOH···(-)OAc type of structures. Breaking of CH···O bonds shifts the equilibrium towards PhO(-)···HOAc form.

Ab initio molecular dynamics simulations of aqueous triflic acid confined in carbon nanotubes

Ab initio molecular dynamics simulations were performed to investigate the effects of nanoscale confinement on the structural and dynamical properties of aqueous triflic acid (CF3SO3H). Single-walled carbon nanotubes (CNTs) with diameters ranging from ∼11 to 14 Å were used as confinement vessels, and the inner surface of the CNT were either left bare or fluorinated to probe the influence of the confined environment on structural and dynamical properties of the water and triflic acidic. The systems were simulated at hydration levels of n = 1-3 H2O/CF3SO3H. Proton dissociation expectedly increased with increasing hydration. Along with the level of hydration, hydrogen bond connectivity between the triflic acid molecules, both directly and via a single water molecule, played a role on proton dissociation. Direct hydrogen bonding between the CF3SO3H molecules, most commonly found in the larger bare CNT, also promoted interactions between water molecules allowing for greater separation of the dissociated protons from the CF3SO3(-) as the hydration level was increased. However, this also resulted in a decrease in the overall proportion of dissociated protons. The confinement dimensions altered both the hydrogen bond network and the distribution of water molecules where the H2O in the fluorinated CNTs tended to form small clusters with less proton dissociation at n = 1 and 2 but the highest at n = 3. In the absence of nearby hydrogen bond accepting sites from H2O or triflic acid SO3H groups, the water molecules formed weak hydrogen bonds with the fluorine atoms. In the bare CNT systems, these involved the CF3 groups of triflic acid and were more frequently observed when direct hydrogen bonding between CF3SO3H hindered potential hydrogen bonding sites. In the fluorinated tubes, interactions with the covalently bound fluorine atoms of the CNT wall dominated which appear to stabilize the hydrogen bond network. Increasing the hydration level increased the frequency of the OH···F (CNT) hydrogen bonding which was highly pronounced in the smaller fluorinated CNT indicating an influence on the confinement dimensions on these interactions.

Recent progress on dielectric properties of protic ionic liquids

Protic ionic liquids (PILs) are key materials for a wide range of emerging technologies. In particular, these systems have long been envisioned as promising candidates for fuel cells. Therefore, in recent years special attention has been devoted to thorough studies of these compounds. Amongst others, dielectric properties of PILs at ambient and elevated pressure have become the subject of intense research. The reason for this lies in the role of broadband dielectric spectroscopy in recognizing the conductivity mechanism in protic ionic systems. In this paper, we summarize the dielectric results of various PILs reflecting recent advances in this field.

Developing a general interaction potential for hydrophobic and hydrophilic interactions

We review direct force measurements on a broad class of hydrophobic and hydrophilic surfaces. These measurements have enabled the development of a general interaction potential per unit area, W(D) = -2γ(i)Hy exp(-D/D(H)) in terms of a nondimensional Hydra parameter, Hy, that applies to both hydrophobic and hydrophilic interactions between extended surfaces. This potential allows one to quantitatively account for additional attractions and repulsions not included in the well-known combination of electrostatic double layer and van der Waals theories, the so-called Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The interaction energy is exponentially decaying with decay length D(H) ≈ 0.3-2 nm for both hydrophobic and hydrophilic interactions, with the exact value of D(H) depending on the precise system and conditions. The pre-exponential factor depends on the interfacial tension, γ(i), of the interacting surfaces and Hy. For Hy > 0, the interaction potential describes interactions between partially hydrophobic surfaces, with the maximum hydrophobic interaction (i.e., two fully hydrophobic surfaces) corresponding to Hy = 1. Hydrophobic interactions between hydrophobic monolayer surfaces measured with the surface forces apparatus (SFA) are shown to be well described by the proposed interaction potential. The potential becomes repulsive for Hy < 0, corresponding to partially hydrophilic (hydrated) interfaces. Hydrated surfaces such as mica, silica, and lipid bilayers are discussed and reviewed in the context of the values of Hy appropriate for each system.

Editorial of the PCCP themed issue on "Solvation Science"

The present special issue presents exciting experimental and theoretical results in the topic of "Solvation Science", a topic that emerges from physical, theoretical, and industrial chemistry, and is also of interest to a multitude of neighboring fields, such as inorganic and organic chemistry, biochemistry, physics and engineering. We hope that the articles will be highly useful for researchers who would like to enter this newly emerging area, and that it is a valuable source for the nucleation of new ideas and collaborations to better understand the active role of the solvent in reactions.

Computer simulation study of the intermolecular structure of phosphoric acid-N,N-dimethylformamide mixtures

The structures and energies of the complexes (H3PO4)2, H3PO4-DMF, and (H3PO4)2-DMF were analyzed at the B3LYP level of approximation. It was found that H-bonds form between H3PO4 and DMF molecules, but the strength of the H-bond depends strongly on its molecular environment. Effects of the solvent were taken into account via the CPCM approach. According to the B3LYP-СPCM calculations, the O···O distance in (H3PO4)2-DMF is shorter and its H-bonds are stronger than in the other complexes studied. In order to study the effects of concentration on the intermolecular structure, molecular dynamics simulations of H3PO4-DMF mixtures with mole fractions of acid of <0.1 were performed. The calculations indicated that the largest fraction of the acid protons are involved in hydrogen bonding with oxygen atoms of the DMF molecules. An increased probability of acid-acid hydrogen-bond formation at phosphoric acid mole fractions >0.06 was also noted.

Molecular origin of enhanced proton conductivity in anhydrous ionic systems

Ionic systems with enhanced proton conductivity are widely viewed as promising electrolytes in fuel cells and batteries. Nevertheless, a major challenge toward their commercial applications is determination of the factors controlling the fast proton hopping in anhydrous conditions. To address this issue, we have studied novel proton-conducting materials formed via a chemical reaction of lidocaine base with a series of acids characterized by a various number of proton-active sites. From ambient and high pressure experimental data, we have found that there are fundamental differences in the conducting properties of the examined salts. On the other hand, DFT calculations revealed that the internal proton hopping within the cation structure strongly affects the pathways of mobility of the charge carrier. These findings offer a fresh look on the Grotthuss-type mechanism in protic ionic glasses as well as provide new ideas for the design of anhydrous materials with exceptionally high proton conductivity.

Maleimide: a potential building block for the design of proton exchange membranes studied by ab initio molecular dynamics simulations

Ab initio molecular dynamics (AIMD) simulations are applied to the study of proton transport in solid state maleimide.

Highly proton conductive phosphoric acid-nonionic surfactant lyotropic liquid crystalline mesophases and application in graphene optical modulators

Proton conducting gel electrolytes are very important components of clean energy devices. Phosphoric acid (PA, H(3)PO(4) · H2O) is one of the best proton conductors, but needs to be incorporated into some matrix for real device applications, such as into lyotropic liquid crystalline mesophases (LLCMs). Herein, we show that PA and nonionic surfactant (NS, C(12)H(25)(OCH(2)CH(2))(10)OH, C(12)E(10)) molecules self-assemble into PANS-LLCMs and display high proton conductivity. The content of the PANS-LLCM can be as high 75% H(3)PO(4) · H2O and 25% 10-lauryl ether (C(12)H(25)(OCH(2)CH(2))(10)OH, C(12)E(10)), and the mesophase follows the usual LLC trend, bicontinuous cubic (V1)-normal hexagonal (H1)-micelle cubic (I1), by increasing the PA concentration in the media. The PANS-LLCMs are stable under ambient conditions, as well as at high (up to 130 °C) and low (-100 °C) temperatures with a high proton conductivity, in the range of 10(-2) to 10(-6) S/cm. The mesophase becomes a mesostructured solid with decent proton conductivity below -100 °C. The mesophase can be used in many applications as a proton-conducting media as well as a phosphate source for the synthesis of various metal phosphates. As an application, we demonstrate a graphene-based optical modulator using supercapacitor structure formed by graphene electrodes and a PANS electrolyte. A PANS-LLC electrolyte-based supercapacitor enables efficient optical modulation of graphene electrodes over a range of wavelengths, from 500 nm to 2 μm, under ambient conditions.

Tuning the localized surface plasmon resonance in Cu(2-x)Se nanocrystals by postsynthetic ligand exchange

Nanoparticles exhibiting localized surface plasmon resonances (LSPR) are valuable tools traditionally used in a wide field of applications including sensing, imaging, biodiagnostics and medical therapy. Plasmonics in semiconductor nanocrystals is of special interest because of the tunability of the carrier densities in semiconductors, and the possibility to couple the plasmonic resonances to quantum confined excitonic transitions. Here, colloidal Cu2-xSe nanocrystals were synthesized, whose composition was shown by Rutherford backscattering analysis and electron dispersive X-ray spectroscopy, to exhibit Cu deficiency. The latter results in p-type doping causing LSPRs, in the present case around a wavelength of 1100 nm, closely matching the indirect band gap of Cu2-xSe. By partial exchange of the organic ligands to specific electron trapping or donating species the LSPR is fine-tuned to exhibit blue or red shifts, in total up to 200 nm. This tuning not only provides a convenient tool for post synthetic adjustments of LSPRs to specific target wavelength but the sensitive dependence of the resonance wavelength on surface charges makes these nanocrystals also interesting for sensing applications, to detect analytes dressed by functional groups.

Exceptional isotopic-substitution effect: breakdown of collective proton tunneling in hexagonal ice due to partial deuteration

Multiple proton transfer controls many chemical reactions in hydrogen-bonded networks. However, in contrast to well-understood single proton transfer, the mechanisms of correlated proton transfer and of correlated proton tunneling in particular have remained largely elusive. Herein, fully quantized ab initio simulations are used to investigate H/D isotopic-substitution effects on the mechanism of the collective tunneling of six protons within proton-ordered cyclic water hexamers that are contained in proton-disordered ice, a prototypical hydrogen-bonded network. At the transition state, isotopic substitution leads to a Zundel-like complex, [HO⋅⋅⋅D⋅⋅⋅OH], which localizes ionic defects and thus inhibits perfectly correlated proton tunneling. These insights into fundamental aspects of collective proton tunneling not only rationalize recent neutron-scattering experiments, but also stimulate investigations into multiple proton transfer in hydrogen-bonded networks much beyond ice.

Hydrogen bonding analysis of phosphoric acid-N,N-dimethylformamide mixtures

An analysis of H-bonding in phosphoric acid (H3PO4)-N,N-dimethylformamide (DMF) mixtures was performed across the full range of mixture compositions using the results from molecular dynamics simulations. The distribution of molecules according to the number of H-bonds they formed with OH groups or О(=Р) atoms of acid molecules and О(=С) atoms of DMF molecules was calculated. The dependence of the average number of H-bonds per acid molecule on the concentration when the acid molecule acted as a proton acceptor was discerned, as were the corresponding dependences when the acid molecule acted as a proton donor towards H3PO4 and/or DMF. The dependence of the average number of H-bonds per DMF molecule (which always acted as a proton acceptor) on the concentration was also determined.

Enhanced proton conductivity of Nafion hybrid membrane under different humidities by incorporating metal-organic frameworks with high phytic acid loading

In this study, phytic acid (myo-inositol hexaphosphonic acid) was first immobilized by MIL101 via vacuum-assisted impregnation method. The obtained phytic@MIL101 was then utilized as a novel filler to incorporate into Nafion to fabricate hybrid proton exchange membrane for application in PEMFC under different relative humidities (RHs), especially under low RHs. High loading and uniform dispersion of phytic acid in MIL 101(Cr) were achieved as demonstrated by ICP, FT-IR, XPS, and EDS-mapping. The phytic@MIL101 was dispersed homogeneously in the Nafion matrix when the filler content was less than 12%. Hybrid membranes were evaluated by proton conductivity, mechanical property, thermal stability, and so forth. Remarkably, the Nafion/phytic@MIL hybrid membranes showed high proton conductivity at different RHs, especially under low RHs, which was up to 0.0608 S cm(-1) and 7.63 × 10(-4) S cm(-1) at 57.4% RH and 10.5% RH (2.8 and 11.0 times higher than that of pristine membrane), respectively. Moreover, the mechanical property of Nafion/phtic@MIL hybrid membranes was substantially enhanced and the thermal stability of membranes was well preserved.

Aqueous solutions: state of the art in ab initio molecular dynamics

The simulation of liquids by ab initio molecular dynamics (AIMD) has been a subject of intense activity over the last two decades. The significant increase in computational resources as well as the development of new and efficient algorithms has elevated this method to the status of a standard quantum mechanical tool that is used by both experimentalists and theoreticians. As AIMD computes the electronic structure from first principles, it is free of ad hoc parametrizations and has thus been applied to a large variety of physical and chemical problems. In particular, AIMD has provided microscopic insight into the structural and dynamical properties of aqueous solutions which are often challenging to probe experimentally. In this review, after a brief theoretical description of the Born-Oppenheimer and Car-Parrinello molecular dynamics formalisms, we show how AIMD has enhanced our understanding of the properties of liquid water and its constituent ions: the proton and the hydroxide ion. Thereafter, a broad overview of the application of AIMD to other aqueous systems, such as solvated organic molecules and inorganic ions, is presented. We also briefly describe the latest theoretical developments made in AIMD, such as methods for enhanced sampling and the inclusion of nuclear quantum effects.

Observation of highly decoupled conductivity in protic ionic conductors

Using dielectric spectroscopy, we report the observation of highly decoupled conductivity in a newly synthesized protic ionic conductor, lidocaine di-(dihydrogen phosphate).

The proton conduction mechanism in a material consisting of packed acids

We observed fast proton conduction in a material consisting of packed acids, the “packed-acid mechanism” resulting from acid–acid interactions.

A microfluidic approach to synthesizing high-performance microfibers with tunable anhydrous proton conductivity

Here, we demonstrate a new approach for the synthesis of ion exchange microfibers with finely tuned anhydrous conductivity. This work presents microfluidics as a system to control the size and phosphoric acid (PA) doping level of the polybenzimidazole (PBI) microfibers. It has been shown that the PA doping level can be controlled by varying the flow ratios in the microfluidic channel. The diameter of the microfibers increased with extending mixing time, whereas the doping level decreased with increasing flow ratio. The highest doping level, 16, was achieved at the flow ratio of 0.175. The anhydrous proton conductivity of the microfibers was found to be adjustable between 0.01 and 0.1 S cm(-1) at 160 °C, which is considerably higher than for conventionally doped PBI cast membranes (0.004 S cm(-1)). Furthermore, molecular dynamic simulation of proton conduction through the microfibers at different doping levels was in good agreement with the experimental results. These results demonstrate the potential of the microfluidic technique to precisely tune the physicochemical properties of PBI microfibers for various electrochemical applications such as hydrogen sensors, fuel cells as well as artificial muscles.

High pressure as a key factor to identify the conductivity mechanism in protic ionic liquids

In this Letter we report the relation between ionic conductivity and structural relaxation in supercooled protic ionic liquids (PILs) under high pressure. The results of high-pressure dielectric and volumetric measurements, combined with rheological and temperature-modulated differential scanning calorimetry experiments, have revealed a fundamental difference between the conducting properties under isothermal and isobaric conditions for three PILs with different charge transport mechanisms (Grotthuss vs vehicle). Our findings indicate a breakdown of the fractional Stokes-Einstein relation and Walden rule when the ionic transport is controlled by fast proton hopping. Consequently, we demonstrate that the studied PILs exhibit significantly higher conductivity than one would expect taking into account that they are in fact a mixture of ionic and neutral species. Thus, the examined herein samples represent a new class of "superionic" materials desired for many advanced applications.

Mechanism of proton transport in ionic-liquid-doped perfluorosulfonic acid membranes

Ionic-liquid-doped perfluorosulfonic acid membranes (PFSA) are promising electrolytes for intermediate/high-temperature fuel cell applications. In the present study, we examine proton-transport pathways in a triethylammonium-triflate (TEATF) ionic liquid (IL)-doped Nafion membrane using quantum chemistry calculations. The IL-doped membrane matrix contains triflic acid (TFA), triflate anions (TFA(-)), triethylamine (TEA), and triethylammonium cations (TEAH(+)). Results show that proton abstraction from the sulfonic acid end groups in the membrane by TFA(-) facilitates TEAH(+) interaction with the side-chains. In the IL-doped PFSA membrane matrix, proton transfer from TFA to TEA and TFA to TFA(-) occurs. However, proton transfer from a tertiary amine cation (TEAH(+)) to a tertiary amine (TEA) does not occur without an interaction with an anion (TFA(-)). An anion interaction with the amine increases its basicity, and as a consequence, it takes a proton from a cation either instantly (if the cation is freely moving) or with a small activation energy barrier of 2.62 kcal/mol (if the cation is interacting with another anion). The quantum chemistry calculations predict that anions are responsible for proton-exchange between cations and neutral molecules of a tertiary amine. Results from this study can assist the experimental choice of IL to provide enhanced proton conduction in PFSA membrane environments.

Onsager's Wien effect on a lattice

The second Wien effect describes the nonlinear, non-equilibrium response of a weak electrolyte in moderate to high electric fields. Onsager's 1934 electrodiffusion theory, along with various extensions, has been invoked for systems and phenomena as diverse as solar cells, surfactant solutions, water splitting reactions, dielectric liquids, electrohydrodynamic flow, water and ice physics, electrical double layers, non-ohmic conduction in semiconductors and oxide glasses, biochemical nerve response and magnetic monopoles in spin ice. In view of this technological importance and the experimental ubiquity of such phenomena, it is surprising that Onsager's Wien effect has never been studied by numerical simulation. Here we present simulations of a lattice Coulomb gas, treating the widely applicable case of a double equilibrium for free charge generation. We obtain detailed characterization of the Wien effect and confirm the accuracy of the analytical theories as regards the field evolution of the free charge density and correlations. We also demonstrate that simulations can uncover further corrections, such as how the field-dependent conductivity may be influenced by details of microscopic dynamics. We conclude that lattice simulation offers a powerful means by which to model and investigate system-specific corrections to the Onsager theory, and thus constitutes a valuable tool for detailed theoretical studies of the numerous practical applications of the second Wien effect.

Large-scale atomistic and quantum-mechanical simulations of a Nafion membrane: Morphology, proton solvation and charge transport

Atomistic and first-principles molecular dynamics simulations are employed to investigate the structure formation in a hydrated Nafion membrane and the solvation and transport of protons in the water channel of the membrane. For the water/Nafion systems containing more than 4 million atoms, it is found that the observed microphase-segregated morphology can be classified as bicontinuous: both majority (hydrophobic) and minority (hydrophilic) subphases are 3D continuous and organized in an irregular ordered pattern, which is largely similar to that known for a bicontinuous double-diamond structure. The characteristic size of the connected hydrophilic channels is about 25-50 Å, depending on the water content. A thermodynamic decomposition of the potential of mean force and the calculated spectral densities of the hindered translational motions of cations reveal that ion association observed with decreasing temperature is largely an entropic effect related to the loss of low-frequency modes. Based on the results from the atomistic simulation of the morphology of Nafion, we developed a realistic model of ion-conducting hydrophilic channel within the Nafion membrane and studied it with quantum molecular dynamics. The extensive 120 ps-long density functional theory (DFT)-based simulations of charge migration in the 1200-atom model of the nanochannel consisting of Nafion chains and water molecules allowed us to observe the bimodality of the van Hove autocorrelation function, which provides the direct evidence of the Grotthuss bond-exchange (hopping) mechanism as a significant contributor to the proton conductivity.