Double transacetalization of diacylium ions

Triuret as a potential hypokalemic agent: Structure characterization of triuret and triuret-alkali metal adducts by mass spectrometric techniques

Triuret (also known as carbonyldiurea, dicarbamylurea, or 2,4-diimidotricarbonic diamide) is a byproduct of purine degradation in living organisms. An abundant triuret precursor is uric acid, whose level is altered in multiple metabolic pathologies. Triuret can be generated via urate oxidation by peroxynitrite, the latter being produced by the reaction of nitric oxide radical with superoxide radical anion. From this standpoint, an excess production of superoxide radical anions could indirectly favor triuret formation; however very little is known about the potential in vivo roles of this metabolite. Triuret's structure is suggestive of its ability to adopt various conformations and act as a flexible ligand for metal ions. In the current study, HPLC-MS/MS, energy-resolved mass spectrometry, selected ion monitoring, collision-induced dissociation, IRMPD spectroscopy, Fourier transform-ion cyclotron resonance mass spectrometry and computational methods were employed to characterize the structure of triuret and its metal complexes, to determine the triuret-alkali metal binding motif, and to evaluate triuret affinity toward alkali metal ions, as well as its affinity for Na(+) and K(+) relative to other organic ligands. The most favored binding motif was determined to be a bidentate chelation of triuret with the alkali metal cation involving two carbonyl oxygens. Using the complexation selectivity method, it was observed that in solution triuret has an increased affinity for potassium ions, compared to sodium and other alkali metal ions. We propose that triuret may act as a potential hypokalemic agent under pathophysiological conditions conducive to its excessive formation and thus contribute to electrolyte disorders. The collision- or photo-induced fragmentation channels of deprotonated and protonated triuret, as well as its alkali metal adducts, are likely to mimic the triuret degradation pathways in vivo.

Meerwein reaction of phosphonium ions with epoxides and thioepoxides in the gas phase

Phosphonium ions are shown to undergo a gas-phase Meerwein reaction in which epoxides (or thioepoxides) undergo three-to-five-membered ring expansion to yield dioxaphospholanium (or oxathiophospholanium) ion products. When the association reaction is followed by collision-induced dissociation (CID), the oxirane (or thiirane) is eliminated, making this ion molecule reaction/CID sequence a good method of net oxygen-by-sulfur replacement in the phosphonium ions. This replacement results in a characteristic mass shift of 16 units and provides evidence for the cyclic nature of the gas-phase Meerwein product ions, while improving selectivity for phosphonium ion detection. This reaction sequence also constitutes a gas-phase route to convert phosphonium ions into their sulfur analogs. Phosphonium and related ions are important targets since they are commonly and readily formed in mass spectrometric analysis upon dissociative electron ionization of organophosphorous esters. The Meerwein reaction should provide a new and very useful method of recognizing compounds that yield these ions, which includes a number of chemical warfare agents. The Meerwein reaction proceeds by phosphonium ion addition to the sulfur or oxygen center, followed by intramolecular nucleophilic attack with ring expansion to yield the 1,3,2-dioxaphospholanium or 1,3,2-oxathiophospholanium ion. Product ion structures were investigated by CID tandem mass spectrometry (MS(2)) experiments and corroborated by DFT/HF calculations.

Ionic Transacetalization with Acylium Ions: A Class-Selective and Structurally Diagnostic Reaction for Cyclic Acetals Performed under Unique Electrospray and Atmospheric Pressure Chemical Ionization In-Source Ion−Molecule Reaction Conditions

Ionic transacetalization of cyclic acetals with the gaseous (CH3)2NCO+ acylium ion has been performed under unique in-source ion-molecule reaction (in-source IMR) conditions of electrospray (ESI) and atmospheric pressure chemical ionization (APCI). In-source IMR under ESI and APCI greatly expands the range of neutral molecules that can be brought to the gas phase to react by ionic transacetalization, a general, class-selective and structurally diagnostic reaction for cyclic acetals (Moraes, L. A. B.; Gozzo, F. C.; Vainiotalo, P.; Eberlin, M. N. J. Org. Chem. 1997, 62, 5096). Heavier, more polar, and less volatile cyclic acetals than those previously employed in quadrupole collision cells are shown to react efficiently by ionic transacetalization under the ESI and APCI in-source IMR conditions. Tetramethylurea (TMU) acts as an efficient dopant, being co-injected with the acetal in either benzene, toluene, methanol, or water/methanol solutions. Under APCI or ESI, the basic TMU dopant is protonated preferentially, and the labile protonated TMU then undergoes dissociation to (CH3)2NCO+, the least acidic and the most transacetalization-reactive acylium ion so far tested. Under the relatively high-pressure, low-energy collision conditions set to favor associative reactions, (CH3)2NCO+ reacts competitively both with TMU to form acylated TMU and with the acetal via ionic transacetalization to form the respective cyclic ionic acetals. Spectrum subtraction removes the ionic products of the dopant (TMU) self-reactions, thus providing clean ion-molecule reaction product ion mass spectra, which are used for the selective, structurally diagnostic detection of cyclic acetals. Information on ring substituents comes from characteristic mass shifts resulting from aldehyde/ketone by acylium ion replacement. Enhanced selectivity in structural characterization or chemical recognition for cyclic acetal monitoring is gained by performing on-line collision-induced dissociation via tandem mass spectrometric experiments. Most cyclic ionic acetals dissociate exclusively or nearly exclusively to re-form the reactant (CH3)2NCO+ acylium ion whereas the presence of additional functional groups with increased structural complexity tends to favor other specific but likewise selective dissociation channels.

Ketalization of phosphonium ions by 1,4-dioxane: selective detection of the chemical warfare agent simulant DMMP in mixtures using ion/molecule reactions

Phosphonium ions CH(3)P(O)OCH(3)(+) (93 Th) and CH(3)OP(O)OCH(3)(+) (109 Th) react with 1,4-dioxane to form unique cyclic ketalization products, 1,3,2-dioxaphospholanium ions. By contrast, a variety of other types of ions having multiple bonds, including the acylium ions CH(3)CO(+) (43 Th), CH(3)OCO(+) (59 Th), (CH(3))(2)NCO(+) (72 Th), and PhCO(+) (105 Th), the iminium ion H(2)C[double bond]NHC(2)H(5)(+) (58 Th) and the carbosulfonium ion H(2)C[double bond]SC(2)H(5)(+) (75 Th) do not react with 1,4-dioxane under the same conditions. The characteristic ketalization reaction can also be observed when CH(3)P(OH)(OCH(3))(2)(+), viz. protonated dimethyl methylphosphonate (DMMP), collides with 1,4-dioxane, as a result of fragmentation to yield the reactive phosphonium ion CH(3)P(O)OCH(3)(+) (93 Th). This novel ion/molecule reaction is highly selective to phosphonium ions and can be applied to identify DMMP selectively in the presence of ketone, ester, and amide compounds using a neutral gain MS/MS scan. This method of DMMP analysis can be applied to aqueous solutions using electrospray ionization; it shows a detection limit in the low ppb range and a linear response over the range 10 to 500 ppb.

Structurally diagnostic ion-molecule reactions: acylium ions with alpha-, beta- and gamma-hydroxy ketones

Gas-phase reactions of four acylium ions and a thioacylium ion with three isomeric alpha-, beta- and gamma-hydroxy ketones are performed by pentaquadrupole mass spectrometric experiments. Novel structurally diagnostic reactions are observed, and found to correlate directly with interfunctional group separation. All five ions tested (CH(3)CO(+), CH(2)(double bond)CHCO(+), PhCO(+), (CH(3))(2)NCO(+) and (CH(3))(2)NCS(+)) react with the gamma-hydroxy ketone (5-hydroxy-2-pentanone) to form nearly exclusively a cyclic oxonium ion of m/z 85 that formally arises from hydroxy anion abstraction. With the beta-hydroxy ketone (4-hydroxy-2-pentanone), CH(2)(double bond)CHCO(+), PhCO(+) and (CH(3))(2)NCO(+) form adducts that undergo fast cyclization via intramolecular water displacement, yielding resonance-stabilized cyclic dioxinylium ions. With the alpha-hydroxy ketone (3-hydroxy-3-methyl-2-butanone), PhCO(+), (CH(3))(2)NCO(+) and (CH(3))(2)NCS(+) form stable adducts. Evidence that these adducts display cyclic structures is provided by the triple-stage mass spectra of the (CH(3))(2)NCS(+) adduct; it dissociates to (CH(3))(2)NCO(+) via a characteristic reaction-dissociation pathway that promotes sulfur-by-oxygen replacement. If cyclizations are assumed to occur with intramolecular anchimeric assistance, relationships between structure and reactivity are easily recognized.

Mono and double polar [4 + 2(+)] Diels-Alder cycloaddition of acylium ions with O-heterodienes

Gas-phase reactions of acylium ions with alpha,beta-unsaturated carbonyl compounds were investigated using pentaquadrupole multiple-stage mass spectrometry. With acrolein and metacrolein, CH(3)-C(+)(double bond)O, CH(2)(double bond)CH-C(+)(double bond)O, C(6)H(5)-C(+)(double bond)O, and (CH(3))(2)N-C(+)(double bond)O react to variable extents by mono and double polar [4 + 2(+)] Diels-Alder cycloaddition. With ethyl vinyl ketone, CH(3)-C(+)(double bond)O reacts exclusively by proton transfer and C(6)H(5)-C(+)(double bond)O forms only the mono cycloadduct whereas CH(2)(double bond)CH-C(+)(double bond)O and (CH(3))(2)N-C(+)(double bond)O reacts to great extents by mono and double cycloaddition. The positively charged acylium ions are activated O-heterodienophiles, and mono cycloaddition occurs readily across their C(+)(double bond)O bonds to form resonance-stabilized 1,3-dioxinylium ions which, upon collisional activation, dissociate predominantly by retro-addition. The mono cycloadducts are also dienophiles activated by resonance-stabilized and chemically inert 1,3-dioxonium ion groups, hence they undergo a second cycloaddition across their polarized C(double bond)C ring double bonds. (18)O labeling and characteristic dissociations displayed by the double cycloadducts indicate the site and regioselectivity of double cycloaddition, which are corroborated by Becke3LYP/6-311++G(d,p) calculations. Most double cycloadducts dissociate by the loss of a RCO(2)COR(1) molecule and by a pathway that reforms the acylium ion directly. The double cycloadduct of the thioacylium ion (CH(3))(2)N-C(+)(double bond)S with acrolein dissociates to (CH(3))(2)N-C(+)(double bond)O in a sulfur-by-oxygen replacement process intermediated by the cyclic monoadduct. The double cycloaddition can be viewed as a charge-remote type of polar [4 + 2(+)] Diels-Alder cycloaddition reaction.

Ketalization of gaseous acylium ions

A novel reaction of gaseous acylium ions: ketalization with diols and analogs, has been systematically studied via pentaquadrupole MS2 and MS3 experiments and ab initio calculations. A variety of alpha,beta-diols and their amino, thiol, ether, and thioether analogs have been tested for reactivity, mechanism evaluation, site selectivity, and for the effects of alpha- and beta-interfunctional separation. As for condensed-phase ketalization of neutral carbonyl compounds followed by hydrolysis, gaseous acylium ions are chemically deactivated in the form of cyclic ionic ketals by ketalization, and are efficiently released via on-line collision-induced dissociation. Ketalization of acylium ions is shown to identify and structurally characterize alpha,beta-diols and their analogs, and to distinguish regioisomers. Diastereomers can also be distinguished, as illustrated for cis and trans 1,2-diaminocyclohexane. The MS2 and MS3 data together with 18O-labeling and ab initio calculations establish for acylium ion ketalization a mechanism of anchimeric assistance with participation of the neighboring acyl group.

Transacetalization with gaseous carboxonium and carbosulfonium ions

Primary carboxonium (H2C=O+-R) and carbosulfonium (H2C=S+-R) ions (R = CH3, C2H5, Ph) and the prototype five-membered cyclic carboxonium ion are found to react in the gas phase with cyclic acetals and ketals by transacetalization to form the respective O-alkyl-1,3-dioxolanium and S-alkyl-1,3-oxathiolanium ions. The reaction, which competes mainly with proton transfer and hydride abstraction, initiates by O-alkylation and proceeds by ring opening and recyclization via intramolecular displacement of the carbonyl compound previously protected in its ketal form. As indicated by product ion mass spectra, and confirmed by competitive reactions, carbosulfonium ions are, by transacetalization, much more reactive than carboxonium ions. For acyclic secondary and tertiary carboxonium ions bearing acidic alpha-hydrogens, little or no transacetalization occurs and proton transfer dominates. This structurally related reactivity distinguishes primary from both secondary and tertiary ions, as exemplified for the two structural isomers H2C=O+-C2H5 and CH3C(H)=O+-CH3. The prototype five- and six-membered cyclic carboxonium ions react mainly by proton transfer and adduct formation, but the five-membered ring ion also reacts by transacetalization to a medium extent. Upon CID, the transacetalization products of the primary ions often dissociate by loss of formaldehyde, and a +44 u neutral gain/-30 u neutral loss MS3 scan is shown to efficiently detect reactive carboxonium and carbosulfonium ions. Transacetalization with either carboxonium or carbosulfonium ions provides a route to 1,3-oxathiolanes and analogs alkylated selectively either at the sulfur or oxygen atom.

Acyclic distonic acylium ions: dual free radical and acylium ion reactivity in a single molecule

Three gaseous acyclic distonic acylium ions: *CH2-CH2-C+=O, *CH2-CH2-CH2-C+=O, and *CH2=C(CH2)-C+=O, are found to display dual free radical and acylium ion reactivity; with appropriate neutrals, they react selectively either as free radicals with inert charge sites, or (and more pronouncedly) as acylium ions with inert radical sites. The free radical reactivity of the ions is demonstrated via the Kenttamaa reaction: CH3S* abstraction with the spin trap dimethyl disulfide; their ion reactivity by two reactions most characteristic of acylium ions: transacetalization with 2-methyl-1,3-dioxolane and the gas-phase Meerwein reaction, that is, expansion of the three-membered epoxide ring of epichlorohydrin to the five-membered 1,3-dioxolanylium ion ring. In "one-pot" reactions with gaseous mixtures of epichlorohydrin and dimethyl disulfide, the ions react selectively at either site, but more readily at the acylium charge site, to form the two mono-derivatized ions. Further reaction at either the remaining free radical or acylium charge site forms a single bi-derivatized ion as the final product. Becke3LYP/6-31G(d) calculations predict the reactions at the acylium charge sites of the three distonic ions to be highly exothermic, and both the "hot" transacetalization and epoxide ring expansion products of *CH2-CH2-CH2-C+=O to dissociate rapidly by H2C=CH2 loss in overall exothermic processes. The calculations also predict highly spatially separate odd spin and charge sites for the novel cyclic distonic ketal ions formed by the reactions at the acylium charge sites.