A study of Love wave acoustic biosensors monitoring the adhesion process of tendon stem cells (TSCs)

The Love wave biosensor is considered to be one of the most promising probing methods in biomedical research and diagnosis, and has been applied to detect the mechano-biological behaviour of cells attached to the surface of the device. More efforts should be devoted to basic theoretical research and relevant device performance analysis that may contribute to the further developments of Love wave sensors. In this study, a 36º YX-LiTaO₃-based Love wave sensor with a parylene-C wave guiding layer was adopted as a cell-based biosensor to monitor the adhesion process of tendon stem/progenitor cells (TSCs), a newly discovered cell type in tendons. A theoretical model is proposed to describe the Love wave propagation, in which the adherent cells are considered as a uniform viscoelastic layer. The effects of viscoelastic cell layer and wave guiding layer on the propagation velocity υ and propagation loss (PL) are investigated. The numerical results indicate that adherent cell layers of different storage or loss shear modulus in certain ranges can induce pronounced and characteristic variations in υ and PL, revealing the potential of Love wave sensors to provide useful quantitative measures on cellular mechanical properties. The sensor response to the adhesion of TSCs exhibits high consistency with experimental observations, which demonstrates the Love wave biosensor as a very promising sensor platform for investigating cellular activities under multiple physiological conditions.

SAW-Based Phononic Crystal Microfluidic Sensor-Microscale Realization of Velocimetry Approaches for Integrated Analytical Platform Applications

The current work demonstrates a novel surface acoustic wave (SAW) based phononic crystal sensor approach that allows the integration of a velocimetry-based sensor concept into single chip integrated solutions, such as Lab-on-a-Chip devices. The introduced sensor platform merges advantages of ultrasonic velocimetry analytic systems and a microacoustic sensor approach. It is based on the analysis of structural resonances in a periodic composite arrangement of microfluidic channels confined within a liquid analyte. Completed theoretical and experimental investigations show the ability to utilize periodic structure localized modes for the detection of volumetric properties of liquids and prove the efficacy of the proposed sensor concept.

Label-free Detection of Protein Released during Platelet Activation by CNT-Enhanced Love Mode SAW Sensors

Platelet-rich plasma (PRP) has been applied in a series of clinical treatments. PRP contains high-concentrated platelets, which, when activated, could secret a variety of growth factors and cytokines, to promote and/or enhance healing of injured tissues. Non-activated platelets suspension could be prepared by an isolation method of centrifugation and washing currently. However, it is not clear whether platelets, if any, are already activated during this process and there is no simple method to monitor their activation accordingly. Shear-Horizontal Surface Acoustic Wave sensors (SH-SAW, Love Mode) are promising in fundamental biology as well as biomedical engineering, detecting cell behaviors in liquid in a non-invasive, simple and quantitative manner. In this study, Love mode sensors are adopted for the label-free detection of protein secreted by platelets. Carbon nanotube (CNT) is reported as an advisable platform of both non-specific protein adsorption and specific protein binding. For further improvement of Love mode sensor performance, novel CNT -coated parylene-C film is prepared on its surface as both the acoustic-wave-guiding layer and bio-interface layer. The S21 loss curves of Love mode sensors were recorded and the corresponding resonance frequencies were extracted. The results showed that the CNT-enhanced sensor possessed an increased resonance frequency shift when compared to normal sensor with single parylene-C film under identical collagen concentrations. Then, the modified sensor is used for label-free detection of protein released by various concentrations of platelets. The results revealed high sensitivity and consistency, indicating the potential of CNT-enhanced Love mode sensors in cell-based applications.

Multi reflection of Lamb wave emission in an acoustic waveguide sensor

Recently, an acoustic waveguide sensor based on multiple mode conversion of surface acoustic waves at the solid-liquid interfaces has been introduced for the concentration measurement of binary and ternary mixtures, liquid level sensing, investigation of spatial inhomogenities or bubble detection. In this contribution the sound wave propagation within this acoustic waveguide sensor is visualized by Schlieren imaging for continuous and burst operation the first time. In the acoustic waveguide the antisymmetrical zero order Lamb wave mode is excited by a single phase transducer of 1 MHz on thin glass plates of 1 mm thickness. By contact to the investigated liquid Lamb waves propagating on the first plate emit pressure waves into the adjacent liquid, which excites Lamb waves on the second plate, what again causes pressure waves traveling inside the liquid back to the first plate and so on. The Schlieren images prove this multi reflection within the acoustic waveguide, which confirms former considerations and calculations based on the receiver signal. With this knowledge the sensor concepts with the acoustic waveguide sensor can be interpreted in a better manner.

On-line surveillance of lubricants in bearings by means of surface acoustic waves

The acoustic wave propagation in bearings filled with lubricants and driven by pulsed excitation of surface acoustic waves has been investigated with respect to the presence and the distribution of different lubricants. Experimental setups, which are based on the mode conversion between surface acoustic waves and compression waves at the interface between a solid substrate of the bearing and a lubricant are described. The results of preliminary measurements at linear friction bearings, rotation ball bearings and axial cylinder roller bearings are presented.

Optimization design of a Lamb wave device for density sensing of nonviscous liquid

A Lamb wave device composed of a piezoelectric plate loaded with a nonviscous liquid layer is presented. The relation between the Lamb wave phase velocity and the liquid density can be used for liquid density sensing. In this paper, utilizing the partial wave theory, the concept of effective permittivity is introduced to analyze the Lamb wave's excitation and the phase velocity calculation under a certain liquid density. The interface between the Lamb wave device and the liquid layer is metallized to eliminate the influence of liquid electrical properties when sensing liquid density. Based on the theory model, the phase difference measurement method is adopted to study the device's sensitivity to liquid density. In order to achieve high sensitivity to liquid density with sufficient excitation efficiency of Lamb wave, the optimal parameters of the Lamb wave device including plate thickness and cut orientation are obtained by numerical calculation. The experimental results are found to be in agreement with the theoretical simulations, verifying the validity of the theory model and the practicability of the optimization design.