A Biomimetic Nonantibiotic Nanoplatform for Low-Temperature Photothermal Treatment of Urinary Tract Infections Caused by Uropathogenic Escherichia coli

Engineered Probiotics with Low Oxygen Targeting Porphyromonas gingivalis and Gingival Fibroblasts for the Treatment of Periodontitis

The overuse of antibiotics has increased the prevalence of drug-resistant bacteria in periodontitis. "Sentinel" gingival fibroblasts, stimulated by pathogenic bacteria, continue to release signaling factors that affect stem cell repair and recruit immune cells, resulting in persistent inflammation in periodontal tissues, eventually leading to the loosening and loss of teeth. Periodontal pathogenic bacteria cause surface hypoxia, and gingival fibroblasts in the inflammatory microenvironment express HIF-1α, promoting hypoxic areas in periodontal pockets. No drug delivery system is available for the hypoxic region of periodontal pockets. We synthesized BI NPs via berberine (BBR) and indocyanine green (ICG) and formed BIP NPs by wrapping BI NPs with polydopamine (PDA), and the BIP NPs were delivered to the hypoxic region of the periodontal pocket by hitchhiking with the anaerobic probiotic Bifidobacterium bifidum (Bif). The BIP NPs released berberin (BBR) under near-infrared (NIR) irradiation, which inhibited the sulfur metabolism of Porphyromonas gingivalis via mild photothermal action and BBR-targeted serine acetyltransferase, resulting in a decrease in resistance to oxidative stress, thus exerting a nonantibiotic bacteriostatic effect. This mild photothermal effect facilitated the uptake of BIP NPs bygingival fibroblasts. Moreover, BBR targeted nuclear factor-erythroid 2-related factor 2 (NRF2) to reduce ferroptosis, and the gingival fibroblast supernatant modulated macrophage polarization through the NF-κB pathway. In the periodontitis rat model, Bif@BIP+NIR treatment carried the drug to deep periodontal pockets, decreasing local gingival ferroptosis and alleviating periodontitis symptoms. To summarize, engineered probiotics target low-oxygen periodontal pockets for drug delivery, P. gingivalis for nonantibiotic bacterial inhibition, and gingival fibroblasts to mitigate ferroptosis, thus alleviating periodontitis to reduce periodontitis.

Stimuli-responsive and targeted nanomaterials: Revolutionizing the treatment of bacterial infections

Bacterial infections have emerged as a major threat to global public health. The effectiveness of traditional antibiotic treatments is waning due to the increasing prevalence of antimicrobial resistance, leading to an urgent demand for alternative antibacterial technologies. In this context, antibacterial nanomaterials have proven to be powerful tools for treating antibiotic-resistant and recurring infections. Targeting nanomaterials not only enable the precise delivery of bactericidal agents but also ensure controlled release at the infection site, thereby reducing potential systemic side effects. This review collates and categorizes nanomaterial-based responsive and precision-targeted antibacterial strategies into three key types: exogenous stimuli-responsive (including light, ultrasound, magnetism), bacterial microenvironment-responsive (such as pH, enzymes, hypoxia), and targeted antibacterial action (involving electrostatic interaction, covalent bonding, receptor-ligand mechanisms). Furthermore, we discuss recent advances, potential mechanisms, and future prospects in responsive and targeted antimicrobial nanomaterials, aiming to provide a comprehensive overview of the field's development and inspire the formulation of novel, precision-targeted antimicrobial strategies.

Injectable Therapeutic Hydrogel with H2O2 Self-Supplying and GSH Consumption for Synergistic Chemodynamic/Low-Temperature Photothermal Inhibition of Postoperative Tumor Recurrence and Wound Infection

Postoperative tumor recurrence and wound infection remain significant clinical challenges in surgery, often requiring adjuvant therapies. The combination treatment of photothermal therapy (PTT) and chemodynamic therapy (CDT) has proven to be effective in cancer treatment and wound infection. However, the hyperthermia during PTT increases the risk of normal tissue damage, severely impeding its application. Moreover, the efficacy of CDT is limited by insufficient hydrogen peroxide (H2O2) and excessive glutathione (GSH) levels at tumor or infection sites. Herein, an injectable and multifunctional CuO2@Au hydrogel system (CuO2@Au Gel) is developed for synergistic CDT and low-temperature PTT (LTPTT) to prevent tumor recurrence and bacterial wound infections. CuO2@Au Gel is constructed by embedding therapeutic CuO2@Au into low-melting point agarose hydrogel. In vitro and in vivo experiments confirm that the CuO2@Au in CuO2@Au Gel is capable of self-supplying H2O2 and depleting GSH, exhibiting effective CDT effect in acidic tumor or bacterial infected microenvironment. Additionally, it exhibits favorable photothermal conversion ability, inducing localized temperature elevation and synergistically enhancing CDT efficiency. The prepared CuO2@Au Gel demonstrates efficient tumor ablation capability in post-surgery recurrence mouse models and exhibits promising anti-infective efficiency in bacterial infection wound models, indicating significant potential in adjuvant therapy for post-surgical treatment and recovery.

Thermal-Accelerated Urease-Driven Bowl-Like Polydopamine Nanorobot for Targeted Photothermal/Photodynamic Antibiotic-Free Antibacterial Therapy

The problem of antibiotic resistance seriously affects the treatment of bacterial infections, so there is an urgent need to develop novel antibiotic-independent antimicrobial strategies. Herein, a urease-driven bowl-like mesoporous polydopamine nanorobot (MPDA@ICG@Ur@Man) based on single-wavelength near-infrared (NIR) remote photothermal acceleration to achieve antibiotic-free phototherapy(photothermal therapy, PTT, plus photodynamic therapy, PDT) is first reported. The smart nanorobots can perform active movement by decomposing urea to produce carbon dioxide and ammonia. Particularly, the elevated local temperature during PTT can increase urease activity to enhance the autonomous movement and thus increase the contact between the antimicrobial substance and bacteria. Compared with a nanomotor propelled by urea only, the diffusion coefficient (De) of photothermal-accelerated nanorobots is increased from 1.10 to 1.26 µm2 s-1. More importantly, urease-driven bowl-like nanorobots with photothermal enhancement can specifically identify Escherichia coli (E. coli) and achieve simultaneous PTT/PDT at a single wavelength with 99% antibactericidal activity in vitro. In a word, the urease-driven bowl-like nanorobots guided by photothermal-accelerated strategy could provide a novel perspective for increasing PTT/PDT antibacterial therapeutic efficacy and be promising for various antibiotic-free sterilization applications.

Photochemical Strategies toward Precision Targeting against Multidrug-Resistant Bacterial Infections

Infectious diseases pose a serious threat and a substantial economic burden on global human and public health security, especially with the frequent emergence of multidrug-resistant (MDR) bacteria in clinical settings. In response to this urgent need, various photobased anti-infectious therapies have been reported lately. This Review explores and discusses several photochemical targeted antibacterial therapeutic strategies for addressing bacterial infections regardless of their antibiotic susceptibility. In contrast to conventional photobased therapies, these approaches facilitate precise targeting of pathogenic bacteria and/or infectious microenvironments, effectively minimizing toxicity to mammalian cells and surrounding healthy tissues. The highlighted therapies include photodynamic therapy, photocatalytic therapy, photothermal therapy, endogenous pigments-based photobleaching therapy, and polyphenols-based photo-oxidation therapy. This comprehensive exploration aims to offer updated information to facilitate the development of effective, convenient, safe, and alternative strategies to counter the growing threat of MDR bacteria in the future.

Side-chain engineering of organic photothermal agents for boosting further red-shifted absorption and higher photothermal therapeutic effect

Although organic photothermal agents (PTAs) have been extensively studied in preclinical cancer photothermal therapy (PTT), the internal mechanism, particularly the impact of side chains on photothermal performance, remains inadequately investigated. Herein, we conducted a systematic comparison of the photothermal properties between two organic molecules, namely O-IDTBR with four n-octyl chains and EH-IDTBR with four 2-ethylhexyl chains. With the same conjugated main structure, both O-IDTBR and EH-IDTBR exhibited nearly identical absorption properties (with a peak at 629 nm) in their molecular states. Interestingly, after the formation of nanoparticles (NPs), O-IDTBR NPs with linear alkyl chains exhibit a further red-shifted absorption onset (peak at 711 nm) compared to EH-IDTBR NPs (peak at 662 nm) with branched alkyl chains. Additionally, the photothermal conversion efficiency of O-IDTBR NPs was calculated of 33.7%, which is higher than that of EH-IDTBR NPs (27.7%). This can be attributed to the fact that linear alkyl chains of O-IDTBR NPs promote more intramolecular motions at the aggregated state by extending intermolecular distance and distorting molecular conformation. Therefore, the nonradiative thermal deactivation-induced photothermal property can be further enhanced. Through both in vitro and in vivo experiments, O-IDTBR NPs exhibit effective PTT effect and excellent biocompatibility. This study not only introduces a novel PTA but also opens new avenues for exploring organic optical nano-agents through side-chain engineering to adjust intramolecular motions at the aggregated state.

The Antimicrobial, Hemostatic, and Anti-Adhesion Effects of a Peptide Hydrogel Constructed by the All-d-Enantiomer of Antimicrobial Peptide Jelleine-1

Peptide hydrogels are believed to be potential biomaterials with wide application in the biomedical field because of their good biocompatibility, injectability, and 3D printability. Most of the previously reported polypeptide hydrogels are composed of l-peptides, while the hydrogels formed by self-assembly of d-peptides are rarely reported. Herein, a peptide hydrogel constructed by D-J-1, which is the all-d-enantiomer of antimicrobial peptide Jelleine-1 (J-1) is reported. Field emission scanning electron microscope (FE-SEM) and rheologic study are performed to characterize the hydrogel. Antimicrobial, hemostatic, and anti-adhesion studies are carried out to evaluate its biofunction. The results show that D-J-1 hydrogel is formed by self-assembly and cross-linking driven by hydrogen bonding, hydrophobic interaction, and π-π stacking force of aromatic ring in the structure of D-J-1. It exhibits promising antimicrobial activity, hemostatic activity, and anti-adhesion efficiency in a rat sidewall defect-cecum abrasion model. In addition, it also exhibits good biocompatibility. Notably, D-J-1 hydrogel shows improved in vitro and in vivo stability when compared with its l-enantiomer J-1 hydrogel. Therefore, the present study will provide new insight into the application of d-peptide hydrogel, and provides a new peptide hydrogel with antibacterial, hemostatic, and anti-adhesion efficacy for clinical use.

A dual-modal ROS generator based on multifunctional PDA-MnO2@Ce6 nanozymes for synergistic chemo-photodynamic antibacterial therapy

The rapid emergence of drug-resistant bacteria has attracted great attention to exploring advanced antibacterial methods. However, single-modal antibacterial therapy cannot easily eliminate drug-resistant bacteria completely due to its low efficacy. Therefore, it is essential to achieve multi-modal antibacterial therapy effectively. Herein, a dual-modal ROS generator was designed based on photosensitive PDA-MnO₂@Ce6/liposome (PMCL) nanozymes for synergistic chemo-photodynamic therapy. PMCL nanozymes adhere to bacteria through liposome-membrane fusion. Meanwhile, PMCL catalyzes endogenous hydrogen peroxide (H₂O₂) to generate hydroxyl radicals (˙OH) and singlet oxygen (¹O₂) under laser irradiation. Furthermore, the photothermal effect can accelerate the generation of ROS. Based on dual-enzyme activities (mimicking peroxidase and catalase) and photodynamic properties, PMCL achieves powerful antibacterial efficacy and mature bacterial biofilm eradication. With the synergistic chemo-photodynamic effects, bacterial populations decrease by >99.76% against Gram-positive S. aureus and Gram-negative E. coli. Notably, the synergistic antibacterial properties of PMCL nanozymes are further explored using a mouse wound model of S. aureus infection. This work fabricated an efficient dual-modal ROS generator to kill bacteria, further providing a new strategy for treating wound infection.

A novel donor-acceptor structured diketopyrrolopyrrole-based conjugated polymer synthesized by direct arylation polycondensation (DArP) for highly efficient antimicrobial photothermal therapy

A novel donor (D)-acceptor (A) structured conjugated polymer (PDPP-TP), which contains two alternating D-A pairs, namely thiophene (T)-diketopyrrolopyrrole (DPP) and thiophenen (T)-thieno[3,4-b]pyrazine (TP) along the main chain of the polymer, was synthesized by direct arylation polycondensation (DArP) for a highly efficient photothermal antibacterial treatment. The hydrophilic PDPP-TP-based nanoparticles (PTNPs) with a hydration diameter of about 120 nm were obtained by self-assembly using DSPE-mPEG₂₀₀₀ as the polymer matrix. PTNPs show strong near-infrared (NIR) absorbance with a λ_max at 910 nm (ε = 2.25 × 10⁴ L mol^-1 cm^-1) and NIR light-triggered photoactivity with a high photothermal conversion efficiency (PTCE) of 52.8% under 880 nm laser irradiation. Keeping the merits of excellent biocompatibility and photostability, PTNPs exhibited remarkable bacterial inhibition efficiency of almost 100% against Gram-negative E. coli and Gram-positive S. aureus with the help of an 880 nm laser (0.7 W cm^-2, 6 min), demonstrating its great potential as photothermal materials with a broad spectrum of activity for the effective treatment of microbial infections.

Long-Lasting Chemiluminescence-Based POCT for Portable and Visual Pathogenic Detection and In Situ Inactivation

Bacterial infections seriously threaten human health and also bring huge financial burden. It is critical to construct multifunctional platforms for effectively inactivating bacteria right after point-of-care testing (POCT). Chemiluminescence (CL) bioassays are considered as powerful candidates for POCT as they are free from using an excitation light source, while the flash-type emission limits their further application. Herein, a CL system with long, persistent, and intensive intensity was constructed based on the peroxidase-like property of 4-mercaptophenylboronic acid (MPBA)-functionalized CuSe nanoprobes (CuSe_NPs@MPBA), which improved the detection accuracy and sensitivity. By further integrating a smartphone as an analyzer, quantitative POCT of bacteria was realized with high sensitivity. The limit of detection was as low as 1.25 and 1.01 cfu mL^-1 for Staphylococcus aureus and Escherichia coli detection, respectively. Specifically, bacteria can be eliminated with high efficiency due to excellent photothermal property of CuSe_NPs@MPBA. The developed multifunctional platform also has advantages of simple operation with low cost, suggesting its high potential for use in food safety, environment monitoring, and clinical applications.